Effect of copolymerized ethylene unit on the crystallization behavior of poly(propylene-co-ethylene)s

The crystallization behavior of two kinds of commercial poly(propylene-co-ethylene)s (PPE1, PPE2) with similar average molecular weight and molecular weight distribution, isotacticity and copolymerized ethylene unit content and their fractions was investigated by differential scanning calorimetry (DSC), transmission electron microscopy (TEM) and polarized optical microscopy (POM) techniques. The results indicate that the PPE1 isothermally crystallized films possess thicker and less cross-hatched lamellar structure than those of the PPE2. As for the fractionated samples, the thin films of low temperature (less than or equal to 90 degreesC) fractions (PPE1-80, PPE2-80) of both PPE1 and PPE2 exhibit similar crystallization behavior, while for the high temperature ( greater than or equal to 95 degreesC) fractions (PPE1-108, PPE2-108), the crystalline morphology has marked differences. Compared with PPE2-108, the PPE1-108 isothermally crystallized thin films possess thicker lamellae and less crosshatched lamellar structure, while for the fibrous crystal number, the former is less than that of the latter. The main reason to create the crystallization behavior differences between the two PPEs and their fractions is due to the effect of molecular chain structure, i.e. the different distribution of copolymerized ethylene unit in polypropylene chains.

Superhydrophobic PTFE surfaces by extension

A rather simple but yet effective way to achieve a superhydrophobic film by extending a Teflon film is proposed. The water contact angle can be increased from 118 to 165degrees by extending to ca. 190%. The fibrous crystals and the increasing distance between the fibrous crystals are believed responsible for the high water-contact angle. It indicates that the density of the aligned microstructures is very important for the superhydrophobicity.

Co-electrospun poly(lactide-co-glycolide), gelatin, and elastin blends for tissue engineering scaffolds

In this study, we describe composite scaffolds composed of synthetic and natural materials with physicochemical properties suitable for tissue engineering applications. Fibrous scaffolds were co-electrospun from a blend of a synthetic biodegradable polymer (poly(lactic-co-glycolic acid), PLGA, 10% solution) and two natural proteins, gelatin (denatured collagen, 8% solution) and (x-elastin (20% solution) at ratios of 3:1:2 and 2:2:2 (v/v/v). The resulting PLGA-gelatin-elastin (PGE) fibers were homogeneous in appearance with an average diameter of 380 80 mn, which was considerably smaller than fibers made under identical conditions from the starting materials (PLGA, 780 +/- 200 nm; gelatin, 447 +/- 1.23 nm; elastin, 1060 170 nm). Upon hydration, PGE fibers swelled to an average fiber diameter of 963 +/- 132 nm, but did not disintegrate. Importantly, PGE scaffolds were stable in an aqueous environment without crosslinking, and were more elastic than those made of pure elastin fibers. To investigate the cytocompatibility of PGE, we cultured H9c2 rat cardiac myoblasts and rat bone marrow stromal cells (BMSCs) on fibrous PGE scaffolds. We found that myoblasts grew equally as well or slightly better on the scaffolds than on tissue-culture plastic. Microscopic evaluation confirmed that myoblasts reached confluence on the scaffold surfaces while simultaneously growing into the scaffolds.

Microstructures and tensile properties of Mg-8Gd-0.6Zr-xNd-yY (x+y=3, mass%) alloys

Mg-8Gd-0.6Zr-xNd-yY (mass%) alloys which containing different Nd:Y mass ratio of 3:0, 2:1, 1:2 and 0:3 with a constant x + y = 3 were prepared by metal mould casting method, and the microstructure, aging behaviour and tensile properties have been investigated. The fibrous eutectic areas along the boundaries enlarge clearly in the as-cast alloys containing Y element, and the fine grain boundaries and dispersed precipitation are observed in the aged alloys. The Mg-8Gd-0.6Zr-2Nd-Y alloy exhibits notably age-hardening behaviour and the highest mechanical property. The ultimate tensile strength and yield strength of Mg-8Gd-0.6Zr-2Nd-Y alloy in the peak aged hardness are 293 and 221 MPa at room temperature, 248 and 191 MPa at 230 degrees C. The improvement of age-hardening response and tensile properties is mainly attributed to the quadrate-like stable Mg5RE precipitate, which forms readily and orderly in aged Mg-8Gd-0.6Zr-2Nd-Y alloy.

Investigation on moleculare and crystal structures of metal complexes with aminopolycarboxylic acids (VII) - Syntheses and structure determination of Na-3[Hg (I) (edta) C1] center dot 6H(2)O

In this paper we describe the moleculare and crystal structures of the Na-3[Hg( II )(edta)Cl] . 6H(2)O (edta=ethylenediamine-N,N,N',N'-tetraacetate). The crystal data are as follows: orthorhombic, a=8. 083 (2) Angstrom , b=13. 870(3) Angstrom , c=38. 617(5) Angstrom , v=4329. 4 (13) Angstrom(3) , Z=8, Dc= 1. 798 g . cm(-3), mu=5. 564 mm(-1), P(000)=2280, R=0. 0317 and R-w=0. 0731 for 3883 unique reflections. In complex, the complex anion [Hg ( II ) (edta)Cl](3-) has a seven-coordination structure like a mono-capped trigonal-prism (C-2v-MTP) in which the edta(4-) acts as a hexadentate ligand with four O atoms and two N atoms and a Cl- caps a quadrilateral face as a seventh ligand. It can be known that the Hg2+ which has a d(10) electronic structure can form a high-coordinate compound with a hexadentate ligand (edta) because it has a big ionic radius.

Liquid crystalline polymer as a processing agent in blends of poly(ether-ketone)/LCP70

Blends of a liquid crystalline thermotropic copolyester (LCP70) and an amorphous phenolphthalein based poly(ether-ketone)(PEK-C) with two viscosities were prepared by melt blending. The blends' morphology, rheological and mechanical properties were investigated by DSC, SEM, mechanical and rheological tests. It was observed that the optimum composition of the PEK-C/LCP70 blend was 10 wt% LCP for both mechanical and rheological properties. When the LCP content was less than 10%, the LCP phase existed as finely dispersed fibrous domains with a diameter of about 1 mu m in the matrix, and both tensile and flexural properties were improved. In contrast, when the LCP content reached 20% or more, the LCP domains coalesced to ellipsoidal particles with a diameter of about 5 mu m, and the mechanical properties decreased as a result. It is demonstrated that pure PEK-C with a high viscosity which was difficult to process by melt extrusion, could be extruded conveniently when 10% LCP70 was incorporated. It is emphasized that LCP not only can be used as a reinforcing phase but also an effective processing agent for engineering thermoplastics, especially for those with high viscosity and narrow processing window. (C) 1997 Elsevier Science Ltd.

ATTEMPTS TO MODIFY AN ELECTRODE WITH A CONDUCTING PLATINUM CLUSTER COMPOUND

A conducting platinum cluster compound K1.64Pt(C2O4)(2) was electrochemically synthesized on a glassy carbon electrode through the electrooxidation of K2Pt(C2O4)(2) in an aqueous medium using single potential step and cyclic voltammetry methods. The precursor K2Pt(C2O4)(2) was prepared by a ligand exchange reaction between C2O42- and PtCl42-. During single potential step experiments, the electrolytic current corresponding to the oxidation of K2Pt(C2O4)(2) increased dramatically after a sharp decrease at the beginning (due to the formation of conducting K1.64Pt(C2O4)(2) on the surface of the working electrode). Two kinds of mechanism account for the current transients at the different applied potentials. Cyclic voltammetry was conducted with K1.64Pt(C2O4)(2) on the surface of the working electrode and a steady-state diffusion current was observed. Since the material grew in a fibrous manner, each conducting fiber which was in contact with the electrode could serve as an ultramicroelectrode. The behavior of the working electrode was thus changed from a plain to an ultramicroelectrode array.

Crystallization of Clinopyroxene NaAlSi2O6 from Glass

Clinopyroxene NaAlSi2O6 was synthesized under varying pressures of 3.0-5.0GPa and at the temperature range of 1150.1750 degrees C, for periods of 1.480min. The glass material was completely transformed into homogeneous penetrating fibrous texture of clino

红毛菜发育过程及其生理基础

红毛菜（Bangia Lyngb.）属于红藻门，与紫菜属同属红毛菜科，其味道和营养都优于紫菜。目前红毛菜栽培产业已在我国福建莆田展开，但栽培技术还有待提高。海藻栽培技术的发展和成熟依赖于对其生长发育过程的认识。本研究针对红毛菜发育过程及相关光合生理展开，并初步探讨了一采自山西娘子关泉淡水红毛菜群体（FWB）的系统地位。 色素突变标记的壳孢子萌发特征表明最初两次分裂产生的4细胞决定了完整植株的形态建成。成熟植株，为雌雄异体。雌性生殖器果胞的标志性分化结构为原始受精丝，环境因子是促发原始受精丝发展的外部因素，其膨大程度随受精的延迟而增大。原孢子是主要的无性生殖孢子类型，在不良环境中，藻体也会形成内生孢子或休眠包囊，或者藻体断裂后重新形成完整的植株。 红毛菜的生长发育很大程度上受环境因子的控制。高温不利于配子体的发育，15-20 ºC比较适宜。红毛菜无性繁殖的最适温度-光照组合为20 ºC-8 h，有性繁殖为15 ºC-12h。 不同发育阶段，PSII实际光合效率（Y(II)）与细胞的健康状况以及光合器官完整性及其在细胞内的分布有关，而与细胞的类型关系不大。健康的假根细胞、已分化未成熟的精子以及果孢子细胞均具有很高的Y(II)。色素体由中间位变为围周位，中央大液泡（营养藻丝）和大小纤维囊泡（成熟孢子与精子）的产生，使得细胞Y(II)降低。刚放散的壳孢子Y(II)很低，说明在壳孢子由贝壳基质释放到自由水体过程，光合作用受到一定程度抑制；而2h后，Y(II)开始恢复，rbcL的转录水平非常高，为孢子的萌发储备物质和能量需求。 在失水和低盐胁迫下，藻体均维持较高的Y(II)。干出处理至藻体重量不再变化，复水后Y(II)可回复初始水平。海生红毛菜在100％淡水培养基中（约20ºC）培养7天后，部分雄性藻体依然活着。从而体现了红毛菜位居高潮带的生理优势。 FWB终生行无性繁殖，藻体形态与发生以及染色体数目（4条）与海生群体没有区别。而rbcL-rbcS Spacer序列显示，红毛菜海生群体（无性和有性）具有完全相同的序列，而FWB与它们有5bp差异，但是与欧洲、北美地区的淡水群体仅1bp不同，初步说明所有淡水红毛菜群体具有共同的原始起源。

Embryology of Crawfurdia delavayi (Gentianaceae) and its systematic value

The embryological characters of Crawfurdia delavayi Frabnch. are described and the systematic relationships of Crawfurdia discussed. Anthers are tetrasporangiate. The development of anther walls conforms to the Dicotyledonous type. The tapetum is of single origin. The development of the tapetum with uninucleate cells is of the glandular type. The tapetal cells on the connective side show radial elongation or periclinal division and intrude into the anther locule. The epidermis of anther walls persists and its cells become pillar and fibrous, and the endothecium degenerates. The ovary is bicarpellary and unilocular. The placentation is typically parietal with 8 rows of anatropous ovules. The development of embryo sac is of the polygonum type. Before fertilization, two polar nuclei fuse into a secondary nucleus. Three antipodal cells persist. Flowers are protandrous. Fertilization is porogamous. The development of the endosperm is of the nuclear type. The embryogeny corresponds to the solanad type physalis II variation. The embryological data indicate that it is better to separate Crawfurdia from Gentiana as an independent genus.

情绪干扰下焦虑水平对执行抑制的影响机制——事件相关电位研究

Behavioral inhibition model suggests the generation of anxiety is related with over-inhibition. For knowing about anxiety better, we used event-related potential (ERP) technique to explore the underlying mechanism of executive inhibition under the emotional distracter in high and low trait-anxious groups. Firstly, we set up the Chinese affective picture system (CAPS) as the stimuli of subsequent experiments. Secondly, we screened the high and low trait-anxious participants using the State-Trait Anxiety Inventory. In the first ERP study, a modified oddball paradigm was used with the positive, neutral and negative pictures as novel stimuli and the potentials evoked by three types pictures were analyzed. In the second ERP study, the same paradigm with higher task load was employed to examine the interaction of anxious level and emotion. Main results as follows: 1. CAPS consisted of 852 pictures was assessed via three dimensionalities, valence, arousal and dominance. The standard deviation of scores on valence and dominance was more than the standard deviation of scores on dimension of arousal. Scatter plot showed that the score distributing on the dimension of valence and arousal was wide in CAPS. 2. In both high and low trait-anxiety groups, the amplitudes of N2 and P3 of negative pictures were greater and smaller respectively as compared with neutral and positive pictures, which suggested all participants no matter what anxious level required more inhibition processing to negative information than others. 3. With increasing of task load, the P3 amplitudes of negative pictures in high anxious group were reduced relative to neutral pictures. In addition, in high anxious group, the P3 amplitudes of positive pictures had the same changes as those of negative ones. Whereas, the reduced P3 of positive pictures were not observed in low anxious group. The results showed the high anxious participants employed the same inhibitory strategy to the positive distracter as the negative distracter, which possibly the over-inhibition processing was involved in this group. 4. Dipole source analysis found cingulate may be involved in executive inhibition processing. In sum, as for the inhibition, high and low anxious group both is sensitive to negative information. However, in the high load situation, due to the shortness of cognitive resources, the high anxious individual represents the general sensitivity to all emotional information. These results gave the electrophysiological evidence for over-inhibition in high trait-anxiety group.