43 resultados para ddc: 658.478


Relevância:

10.00% 10.00%

Publicador:

Resumo:

金属材料的疲劳极限或疲劳寿命等性能是长寿命机械和结构抗疲劳设计的基本数据,探讨效率高、成本低而又准确的试验新方法,成为相关研究者十分感兴趣的课题。材料在循环载荷作用下产生的塑性变形经不断累积会引起疲劳破坏,这个过程所耗的塑性功绝大部分以热量形式耗散,因此寻找热耗散温度变化过程与疲劳极限及寿命之间的关系很有意义。就此问题,文中引入利用先进的红外热成象技术确定金属材料疲劳性能的试验研究方法,主要从原理和试验方法两方面进行介绍,并对45钢的试验过程和现象作较为详细地阐述,得到较准确的疲劳极限值和基于红外热象技术确定疲劳寿命的重要参量M。

Relevância:

10.00% 10.00%

Publicador:

Resumo:

从基本的无网格光滑粒子法SPH(Smoothed Particle Hydrodynamics)近似出发,修正了模拟固体力学中大变形弹塑性碰撞的SPH方法.在边界处采用修正的边界条件,弹塑性分析过程中采用增量理论计算应力,迭代过程中用守恒光滑法进行滤波修正消除拉力不稳定.对SPH方法进行了程序实现,给出了杆弹塑性碰撞的算例.计算分析表明,SPH方法节点的影响域较大、精度较相同节点间距有限元法的结果有一定差距,但是通过增加粒子数量可以提高SPH的精度,保持了其简单性和计算大变形的特性.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

利用反射激波加热使试验气体电离,继之以强稀波快速冷却,构成一种新的激波管方法,并测定了在氩气氛中钠离子与电子三体复合速率系数。由于稀疏波冷却速度达10~6K/s,电离过程处于非平衡状态。选用氨基钠作为向实验体系中引入钠离子的源物质。用压电传感器和Langmuir静电探针分别监测反射激波后5区压力和离子浓度变化。稀疏波的冷却过程被视为绝热的。分析了探针工作状态,引入了探针鞘层内的弹性散射修正。测定了在800~2 600K温度范围内以惰性气体氩为碰撞第三体的钠离子与电子离复合速率系数k_r=3.43×10~(-14)T~(-3.77)cm~6s~(-1)。

Relevância:

10.00% 10.00%

Publicador:

Resumo:

It is shown that in a closed equispaced three-level ladder system, by controlling the relative phase of two applied coherent fields, the conversion from absorption with inversion to lasing without inversion (LWI) can be realized; a large index of the refraction with zero absorption can be gotten; considerable increasing of the spectrum region and value of the LWI gain can be achieved. Our study also reveals that the incoherent pumping will produce a remarkable effect oil the phase-dependent properties of the system. Modifying value of the incoherent pumping can change the property of the system from absorption to amplification and enhance significantly LWI gain. If the incoherent pumping is absent, we cannot get any gain for any value of the relative phase. (c) 2007 Elsevier GmbH. All rights reserved.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A Hohlraum-like configuration is proposed for realizing a simple compact source for neutrons. A laser pulse enters a tiny thin-shelled hollow-sphere target through a small opening and is self-consistently trapped in the cavity. The electrons in the inner shell-wall region are expelled by the light pressure. The resulting space-charge field compresses the local ions into a thin layer that becomes strongly heated. An inward expansion of ions into the shell cavity then occurs, resulting in the formation at the cavity center of a hot spot of ions at high density and temperature, similar to that in inertial electrostatic confinement.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

超分辨技术中现有的纯振幅型或纯相位型光瞳滤波器,大部分只能实现轴向或横向超分辨而不能实现三维超分辨,三维超分辨在三维成像系统中有着重要的作用。因此为提高成像系统中的三维分辨能力,设计了一种复振幅光瞳滤波器,并对其三维超分辨性能进行了研究。详细分析了该光瞳滤波器的第一区半径和透射率对施特雷尔比、轴向和横向超分辨因子以及旁瓣能量的影响。通过一系列的模拟证明,借助于复振幅光瞳滤波器可以实现三维超分辨。该滤波器的优点是容易实现三维超分辨,且有比较高的施特雷尔比,缺点是三维超分辨的实现总是伴随着旁瓣能量的增加,但可

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Based on the Huygens-Fresnel diffraction integral and Fourier transform, propagation expression of a chirped Gaussian pulse passing through a hard-edged aperture is derived. Intensity distributions of the pulse with different frequency chirp in the near-field and far-field are analyzed in detail by numerical calculations. In the near-field, amplitudes of the intensity peaks generated by the modulation of the hard-edged aperture decrease with increasing the frequency chirp, which results in the improving of the beam uniformity. A physical explanation for the smoothing effect brought by increasing the frequency chirp is given. The smoothing effect is achieved not only in the pulse with Gaussian transverse profile but also in the pulse with Hermite-Gaussian transverse profile when the frequency chirp increases. (C) 2005 Elsevier B.V. All rights reserved.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

We compare the effectiveness of six exchange/correlation functional combinations (Becke/Lee, Yang and Parr; Becke-3/Lee, Yang and Parr; Becke/Perdew-Wang 91; Becke-3/Perdew-Wang 91; Becke/Perdew 86; Becke-3/Perdew 86) for computing C-N, O-O and N-NO2 dissociation energies and dipole moments of five compounds. The studied compounds are hexabydro-1,3,5-trinitro-1,3,5-triazine (RDX), dimethylnitramine, cyanogen, nitromethane and ozone. The Becke-3/Perdew 86 in conjunction with 6-31G

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The upconversion properties of Er3+/Yb3+ codoped tellurite glasses and glass fibers with D-shape cladding under 980 mu excitation were investigated. Intense emission bands centered at 531, 546 and 658 nm corresponding to the transitions Er3+: H-2(11/2) -> I-4(15/2) , S-4(3/2) -> I-4(15/2) and F-4(9/2) -> I-4(15/2), respectively, were observed at room temperature. Compared with that in Er3+/Yb3+ codoped tellurite bulk glass, the upconversion luminescence becomes more efficient in the fiber geometry. The dependence of upconversion intensities on fiber geometry and possible upconversion mechanism are discussed and evaluated. The presented Er3+/Yb3+ codoped tellurite fibers with intense upconversion luminescence can be used as potential host materials for upconversion fiber lasers. (c) 2005 Elsevier B.V. All rights reserved.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Organic light-emitting diodes (OLEDs) using tris-(8-hydroxy-quinolinato) aluminum (Alq(3)) as an emitter, 8-hydroxy-quinolinato lithium (Liq) as an electron injection layer, were prepared. Experimental results show that the efficiency of device with Liq is three times higher than that without Liq. The device using Liq as an injection layer is less sensitive in efficiency to the Liq thickness than that using LiF. In addition to the Alq3 based devices, Liq is also very effective as an electron injection layer for 4,4'-bis(2,2-diphenylvinyl)-1,1'-biphenyl based blue OLED and poly (2-methoxy,5-(2-ethyl-hexyloxy)-1,4-phenylenevinylene) based orange polymer OLED. (c) 2004 Elsevier B.V. All rights reserved.

Relevância:

10.00% 10.00%

Publicador: