Secondary structures of mRNAs and splicing of introns in eukaryotes.

After analyzing the secondary structures of 68 exon-intron-exon and the corresponding exon-exon sequence segments, it is found that about 90% of 5' and 3' terminal bases G (splicing sites) of introns are situated in the loops of secondary structures or at the ends of stems near the loops, and most of "G" s in loops are closed to the ends of loops. Approximately 92% of the connecting sites of the adjoining exons also show the similar features. About 82% of the branch point "A" s are situated in loops or at the ends of stems near the loops. Splicing sites and branch points approach each other in space because of the folding.

Stable RNA hairpins in 88 coding regions of human mRNA

RNA hairpins containing UNCG, GNRA, CUUG (N = A, U, C or G, R = G or A) loops are unusually thermodynamic stable and conserved structures. The structural features of these hairpin loops are very special, and they play very important roles in vivo. They are prevalent in rRNA, catalytic RNA and non-coding mRNA. However, the 5' C(UUCG)G 3' hairpin is not found in the folding structure of 88 human mRNA coding regions. It is also different from rRNA in that there is no preference for certain sequences among tetraloops in these 88 mRNA folding structures.

A DNA nanomachine induced by single-walled carbon nanotubes on gold surface

Single-walled carbon nanotubes (SWNTs) can selectively induce human telomeric i-motif DNA formation at pH 7.0. Based on this property, we design a DNA nanomachine induced by SWNTs on gold surface. The motor DNA is human telomeric G-quadruplex DNA. The reversible hybridization between the motor DNA and its complementary human telomeric i-motif DNA can be modulated by SWNTs without changing solution pH. Up to now, to our knowledge, there is no report to show that a DNA nanomachine is induced by SWNTs or a DNA nanomachine can detect i-motif formation at pH 7.0. Our work may provide a new concept for designing an SWNT-induced DNA nanomachine and for the detection of i-motif DNA structure at pH 7.0. DNA hybridization, conformational transition and i-motif formation have been characterized on surface or in solution by fluorescence confocal microscopy, circular dichroism, DNA melting and gel electrophoresis. The folding and unfolding kinetics of the DNA nanomachine on gold surface were studied by Fourier transform-surface plasmon resonance (FT-SPR). All these results indicate that SWNTs can induce the DNA nanomachine to work efficiently and reversibly.

The identification and quantification of highly stable 'common hairpin' in the dynamic process of co-transcriptional mRNA folding

In our studies, 88 human mRNA samples were collected from the Integrated Sequence-Structure database and then the dynamic process in co-transcriptional mRNA folding was simulated using the RNAstructure version 4.1 program. Through statistical analyses of the frequencies of occurrence of hairpins, a group of special folding structures-the 'common hairpins'-were identified. These 'common hairpins' have lower energies and occur in all the subsequent folding units that formed in the dynamic folding process. By applying the formulas (1)-(4) of the 'common hairpins' statistical model, 163 'common hairpins' were found, to make up about 7% of the total of 2286 hairpins. Classified studies further show that the 'common hairpins' that were studied may oscillate in the dynamic folding process. However, the hairpin loops of the 'common hairpins' and stems proximal to those 'common hairpins' loops maintain topologically stable structures, while other loops and stems distal to the 'common hairpins' loops are shown to be alterable structures. Strikingly, further studies indicate that the stable structures of these 'common hairpins' may have unbeknown effects on controlling the formation of protein structures in the translation process (unpublished results). (c) 2005 Elsevier B.V. All rights reserved.

Biophysical studies on the full-length human cyclin A(2): Protein stability and folding/unfolding thermodynamics

Human cyclin A(2) participates in cell cycle regulation, DNA replication, and transcription. Its overexpression has been implicated in the development and progression of a variety of human cancers. However, cyclin A(2) or its truncated form is very unstable in the absence of binding partner, which makes it difficult to get a deep insight of structural basis of the interactions. Therefore, biophysical studies of the full-length human cyclin A, would provide important information regarding protein stability and folding/unfolding process.

Simulated pathogenic conformational switch regions matched well with the biochemical findings

Pathogenic conformational conversion is a general causation of many disease, such as transmissible spon- giform encephalopathy (TSE) caused by misfolding of prion, sickle cell anemia, and etc. In such structural changes, misfolding occurs in regions important for the stability of native structure firstly. This destabi- lizes the normal conformation and leads to subsequent errors in folding pathway. Sites involved in the first stage can be deemed switch regions of the protein, and are vital for conformational conversion. Namely it could be a switch of disease at residue level. Here we report an algorithm that can identify such sites computationally with an accuracy of 93%, by calculating the probability of the native structure of a short segment jumping to a mistake one. Knowledge of such switch sites could be used to target clinical therapy, study physiological and pathologic mechanism of protein, and etc.

Generating artificial homologous proteins according to the representative family character in molecular mechanics properties - an attempt in validating an underlying rule of protein evolution

The molecular mechanics property is the foundation of many characters of proteins. Based on intramolecular hydrophobic force network, the representative family character underlying a protein’s mechanics property is described by a simple two-letter scheme. The tendency of a sequence to become a member of a protein family is scored according to this mathematical representation. Remote homologs of the WW-domain family could be easily designed using such a mechanistic signature of protein homology. Experimental validation showed that nearly all artificial homologs have the representative folding and bioactivity of their assigned family. Since the molecular mechanics property is the only consideration in this study, the results indicate its possible role in the generation of new members of a protein family during evolution.

Perspectives on the origin of microfilaments, microtubules, the relevant chaperonin system and cytoskeletal motors - a commentary on the spirochaete origin of flagella

The origin of cytoskeleton and the origin of relevant intracellular transportation system are big problems for understanding the emergence of eukaryotic cells. The present article summarized relevant information of evidences and molecular traces on the origin of actin, tubulin, the chaperonin system for folding them, myosins, kinesins, axonemal dyneins and cytoplasmic dyneins. On this basis the authors proposed a series of works, which should be done in the future, and indicated the ways for reaching the targets. These targets are mainly: 1) the reconstruction of evolutionary path from MreB protein of archaeal ancestor of eukaryotic cells to typical actin; 2) the finding of the MreB or MreB-related proteins in crenarchaea and using them to examine J. A. Lake's hypothesis on the origin of eukaryote from "eocytes" (crenarchaea); 3) the examinations of the existence and distribution of cytoskeleton made of MreB-related protein within coccoid archaea, especially in amoeboid archaeon Thermoplasm acidophilum; 4) using Thermoplasma as a model of archaeal ancestor of eukaryotic cells; 5) the searching for the homolog of ancestral dynein in present-day living archaea. During the writing of this article, Margulis' famous spirochaete hypothesis on the origin of flagella and cilia was unexpectedly involved and analyzed from aspects of tubulins, dyneins and spirochaetes. Actually, spirochaete cannot be reasonably assumed as the ectosymbiotic ancestor of eukaryotic flagella and cilia, since their swing depends upon large amount of bacterial flagella beneath the flexible outer wall, but not depends upon their intracellular tubules and the assumed dyneins. In this case, if they had "evolved" into cilia and lost their bacterial flagella, they would immediately become immobile! In fact, tubulin and dynein-like proteins have not been found in any spirochaete.

Secondary structural analysis of the mRNA regions encoding the hemagglutinin cleavage site basic amino acids of the avian influenza virus H5N1 subtype samples

Here we report the codon bias and the mRNA secondary structural features of the hemagglutinin (HA) cleavage site basic amino acid regions of avian influenza virus H5N1 subtypes. We have developed a dynamic extended folding strategy to predict RNA secondar

A de novo originated gene depresses budding yeast mating pathway and is repressed by the protein encoded by its antisense strand

Recent transcription profiling studies have revealed an unexpectedly large proportion of antisense transcripts in eukaryotic genomes. These antisense genes seem to regulate gene expression by interacting with sense genes. Previous studies have focused on the non-coding antisense genes, but the possible regulatory role of the antisense protein is poorly understood. In this study, we found that a protein encoded by the antisense gene ADF1 acts as a transcription suppressor, regulating the expression of sense gene MDF1 in Saccharomyces cerevisiae. Based on the evolutionary, genetic, cytological and biochemical evidence, we show that the protein-coding sense gene MDF1 most likely originated de novo from a previously non-coding sequence and can significantly suppress the mating efficiency of baker's yeast in rich medium by binding MAT alpha 2 and thus promote vegetative growth. These results shed new light on several important issues, including a new sense-antisense interaction mechanism, the de novo origination of a functional gene, and the regulation of yeast mating pathway.

Integrated folding 4x4 optical matrix switch with total internal reflection mirrors on SOI by anisotropic chemical etching

A folding rearrangeable nonblocking 4 x 4 optical matrix switch was designed and fabricated on silicon-on-insulator wafer. To compress chip size, switch elements (SEs) were interconnected by total internal reflection (TIR) mirrors instead of conventional S-bends. For obtaining smooth interfaces, potassium hydroxide anisotropic chemical etching of silicon was utilized to make the matrix switch for the first time. The device has a compact size of 20 x 1.6 mm(2) and a fast response of 7.5 mu s. The power consumption of each 2 x 2 SE and the average excess loss per mirror were 145 mW and -1.1 dB, respectively. Low path dependence of +/- 0.7 dB in total excess loss was obtained because of the symmetry of propagation paths in this novel matrix switch.

Novel folding large-scale optical switch matrix with total internal reflection mirrors on silicon-on-insulator by anisotropy chemical etching

A compact optical switch matrix was designed, in which light circuits were folded by total internal reflective (TIR) mirrors. Two key elements, 2 x 2 switch and TIR mirror, have been fabricated on silicon-on-insulator wafer by anisotropy chemical etching. The 2 x 2 switch showed very low power consumption of 140 mW and a very high speed of 8 +/- 1 mus. An improved design for the TIR mirror was developed, and the fabricated mirror with smooth and vertical reflective facet showed low excess loss of 0.7 +/- 0.3 dB at 1.55 mum.

Novel folding 8x8 silicon-based optical matrix switch with tapered waveguides and self-aligned corner mirrors

Novel folding 8 x 8 matrix switches based on silicon on insulator were demonstrated. In the design, single-mode rib waveguides and multimode interferences are connected by optimized tapered waveguides to reduce the mode coupling loss between the two types of waveguides. The self-aligned method was applied to the key integrated turning mirrors for perfect positions and low loss of them. A mixed etching process including inductively coupled plasma and chemical etching was employed to etch waveguides and mirrors, respectively. The compact size of the device is only 20 x 3.2 mm(2). The switch element with high switching speed and low power consumption is presented in the matrix. The average insertion loss of the matrix is about -21 dB, and the excess loss of one mirror is measured of -1.4 dB. The worst crosstalk is larger than 21 dB. Experimental results illuminate that some of the main characteristics of optical matrix switches are. developed in the modified design, which is in accord with theoretic analyses.

An 8-b 1-GSmaples/s CMOS cascaded folding and interpolating ADC

This paper presents an 8-bit low power cascaded folding and interpolating analog-to-digital converter (ADC). A reduction in the number of comparators, equal to the number of times the signal is folded, is obtained. The interleaved architecture is used to improve the sampling rate of the ADC. The circuit including a bandgap is implemented in a 0.18-mu m CMOS technology, and measures 1.47 mm X 1.47 mm (including pads). The simulation results illustrate a conversion rate of 1-GSamples/s and a power dissipation of less than 290mW.