Capillary electrophoresis with amperometric detection of curcumin in Chinese herbal medicine pretreated by solid-phase extraction

In the present study, curcumin from Chinese herbal medicine turmeric was determined by capillary electrophoresis with amperometric detection (CE-AD) pretreated by a self-designed, simple, inexpensive solid-phase extraction (SPE) cartridge based on the material of tributyl phosphate resin. An average concentration factor of 9 with the recovery of >80% was achieved when applied to the analysis of curcumin in extracts of turmeric. Under the optimized CE-AD conditions: a running buffer composed of 15 mM phosphate buffer at a pH 9.7, separation voltage at 16 W, injection for 6 s at 9 W and detection at 1.20 V, CE-AD with SPE exhibited low detection limit as 3 - 10(-8) mol/l (SIN = 3), high efficiency of 1.0(.)10(5) N, linear range of 7(.)10(-4) -3(.)10(-6) mol/l (r = 0.9986) for curcumin extracted from light petroleum. The method developed resulted in enhancement of the detection sensitivity and reduction of interference from sample matrix in complicated samples and exhibited the potential application for routine analysis, especially in food, because a relatively complete process of sample treatment and analysis was described.

Dynamic light-scattering characterization of the molecular weight distribution of a broadly distributed phenolphthalein poly(aryl ether ketone)

Using a recently developed laser light-scattering (LLS) procedure, we accomplished the characterization of a broadly distributed unfractionated phenolphthalein poly(aryl ether ketone) (PEK-C) in CHCl3 at 25 degrees C. The laplace inversion of precisely measured intensity-intensity time correlation function from dynamic LLS leads us first to an estimate of the characteristic line-width distribution G(Gamma) and then to the translational diffusion coefficient distribution G(D). By using a previously established calibration of D (cm(2)/s) = 2.37 X 10(-4)M(-0.57), were able to convert G(D) into a differential weight distribution f(w)(M). The weight-average molecular weight M(w) calculated from f(w)(M) agrees well with that directly measured in static LLS. Our results indicate that both the calibration and LLS procedure used in this study are ready to be applied as a routine method for the characterization of the molecular weight distribution of PEK-C. (C) 1996 John Wiley & Sons, Inc.

EASTMAN-AQ/NIII MODIFIED ELECTRODE CHARACTERIZATION AND APPLICATION IN FLOW-INJECTION DETERMINATION OF CARBOHYDRATES AND AMINO-ACIDS

A novel Eastman-AQ/Ni(II) chemically modified electrode (CME) produced by "double coating step" deposition of a poly(ester sulphonic acid) polymer film and Ni2+-containing crystalline species onto glassy carbon instead of a metallic nickel electrode exhibited stable electrocatalytic oxidation of numerous alpha-hydrogen compounds including carbohydrates, amines and amino acids. In cyclic voltammetry, the electrocatalysis appeared with an irreversible anodic wave at +0.55 V (vs. Ag/AgCl). The CME was adapted for constant-potential amperometric detection of these compounds in flow injection analysis. Using the CME, the linear response concentration range was between 1.0 x 10(-5) and 5.0 x 10(-2) mol/l and the detection limit was 5.0 x 10(-6) mol/l for glucose. The stability of the CME was adequate for routine quantitative application.

Using the ribosomal internal transcribed spacer (ITS) as a complement marker for species identification of red macroalgae

Barcodes based on mitochondrial cytochrome oxidase (mtDNA CO1) sequences are being used for broad taxonomic groups of animals with demonstrated success in species identification and cryptic species discovery, but it has become clear that complementation by a nuclear marker system is necessary, in particular for the barcoding of plants. Here, we propose the nuclear internal transcribed spacer (ITS) as a potentially usable and complementary marker for species identification of red macroalgae, as well as present a primary workflow for species barcoding. Data show that for most red macroalgal genera (except members of the family Delesseriaceae), the size of ITS region ranges from 600 to 1200 bp, and contains enough variation to generate unique identifiers at either the species or genus levels. Consistent with previous studies, we found that the ITS sequence can resolve closely related species with the same fidelity as mtDNA CO1. Significantly, we confirmed that length polymorphism in the ITS region (including 5.8S rRNA gene) can be utilized as a character to discriminate red macroalgal species. As a complementary marker, the verifiable nuclear ITS region can speed routine identification and the detection of species, advance ecological and taxonomic inquiry, and permit rapid and accurate analysis of red macroalgae.

A simple method for DNA extraction from sporophyte in the brown alga Laminaria japonica

A simple method was developed for extracting DNA from brown algae Laminaria japonica, which possess large amounts of acidic polysaccharides. Firstly, the sporophyte were washed by eliminating polysaccaride buffer to remove the polysaccharides and then ground in liquid nitrogen. Secondly, the powders were treated with lysing buffer. Thirdly, KAc was used to eliminate the remaining acidic polysaccharides. The extracted DNA was purified using a chloroform-isoamyl alcohol ( 24: 1 v/v), and precipitated in cold isopropanol. The yield was from 18.7 to 37.5 mu g g(-1) (wet weight) and the purity of total DNA was determined spectrophotometrically as the ratio of A(260)/A(280), which was about 1.7 - 1.9. The extracted DNA was of high quality and suitable for molecular analyses, such as PCR, restriction enzyme digestion. This method is a reproducible, simple, and rapid technique for routine DNA extraction from sporophyte in Laminaria japonica. Furthermore, the low cost of this method makes it attractive for large-scale studies.

Programmed cell death in Laminaria japonica (Phaeophyta) tissues infected with alginic acid decomposing bacterium

TdT-mediated dUTP-biotin nick end labeling (TUNEL) is a sensitive and valid method for detecting DNA cleavage in programmed cell death (PCD). Using this method, DNA cleavage was observed in Laminaria japonica sporophytic tissues, which were infected with alginic acid decomposing bacterium. It was found that DNA cleavage occurred 5 min after the infection, the fragments with 3'-OH groups of cleaved nuclear DNA increased with time of infection and spread from the infection site. Although no typical DNA ladder (200 bp/ 180 bp) was detected by routine agarose gel electrophoresis, the cleavage of nuclear DNA fragments of 97 similar to 48.5 kb could be detected by pulsed field gel electrophoresis (PFGE). By using CaspGLOW(TM) fluorescein active caspase-3 staining method, caspase-3 activity has been detected in response to the infection of alginic acid decomposing bacterium. Our results are similar to the observations in hypersensitive response (HR) of higher plant, suggesting that the rapid cell death of L. japonica infected by alginic acid decomposing bacterium might be involved in PCD, and indicating that the occurrence of PCD is an active defense process against the pathogen's infection.

A new method of Laminaria japonica strain selection and sporeling raising by the use of gametophyte clones

One-celled female and male gametophytes of three Laminaria japonica strains were isolated, cultured and gametophyte clones were formed. A technique combining strain selection with sporeling raising by the use of these female and male gametophyte clones was studied. Experiments on 9 different crossing combinations was conducted in November of 1997 in Qingdao, P. R. China. The main economic characteristics, frond length and fresh weight, of sporophytes of different crossing combinations were measured. F-1 sporophytes of No. 2 showed a higher fresh weight and longer length, therefore, No. 2 (Wh860 + x Lid) was selected as a good combination. Its parental female and male gametophyte clones are being mass cultured for sporeling production. By this method, the time needed for strain selection was shortened from 5-6 to 2 years. As compared with the routine method of sporeling raising by the collection of zoospores, the time of sporeling raising of this method decrease by 50%, and the production cost is also reduced by 50%. It is believed that this method will be labour and time saving and a more economic way for strain selection and sporeling raising in L. japonica cultivation industry.

三种海水经济鱼类早期发育生物学的研究

海水经济鱼类的养殖在我国已经形成第四次海水养殖浪潮，经济效益显著，有力地推动了我国海水养殖的产业结构调整和可持续发展。然而在海水养殖发展过程中也存在着诸多问题，尤其是早期发育阶段的高死亡率，严重制约了我国海水养殖产业的稳定和健康发展。 海水鱼类养殖的关键为高质量，高存活率苗种的生产和培育，由于鱼类种类繁多，生物多样性丰富，对应实际的繁育技术，尤其是新品种的开发，必须要做出相应的调整。这就要求我们必须对每一种鱼类早期发育有所了解，并将形态和组织上的数据用于指导生产。 本文通过显微观察和组织学研究，主要描述和研究了我国北方三种重要的海水经济鱼类(条斑星鲽、杂交鲆、条石鲷)的早期发育生物学，并结合实际生产进一步阐明关键期的产生原因，机理以及采用相应的对策。具体结果如下： 1.条斑星鲽：作为冷温性鲆鲽鱼类，条斑星鲽早期发育过程的特征主要有： ① 条斑星鲽受精卵无油球，卵子呈半浮性；不同步卵裂现象提前，发生在第三次卵裂；卵裂期裂球大小差异大。孵化过程较长，在水温8 ± 0.3℃，盐度33的条件下，经9 d孵化。条斑星鲽胚胎发育的不同时期对温度的敏感性不同，其中原肠期对温度比较敏感。 ②在8-10℃，盐度33的条件下，8-9 dph开口摄食。且开口时，其吻前端出现有一点状黑褐色素，构成了条斑星鲽仔鱼“开口期”的重要标志。卵黄囊于消失。在后期仔鱼末期，背鳍和臀鳍上形成特有的黑褐色条斑带。 ③杯状细胞首先出现在咽腔后部和食道前段，胃腺和幽门盲囊出现于29 dph，变态期始于30dph。在条斑星鲽早期发育过程中，观察到其直肠粘膜层细胞质出现大量嗜伊红颗粒，为仔鱼肠道上皮吸收的蛋白质。 ④首先淋巴化的免疫器官是头肾，然后是胸腺和脾脏，这与大部分硬骨鱼类不同。条斑星鲽除头肾和脾脏外，胸腺实质也形成MMCs。其中以脾脏形成MMCs最为丰富，形态多样。 2. 杂交鲆：为同属的牙鲆和夏鲆间的远缘杂交种，其发育过程的特点为： ① 在温度为15.4～16.0℃，杂交鲆胚胎从受精到孵化所需的时间为76 h左右，胚孔关闭前期，胚胎先出现视囊及克氏囊，而后形成体节。孵出前胚体在卵膜内环绕不到1周。 ② 孵化后消失。杂交鲆群体变态间隔长(34-60 dph)，且变态高峰期出现的冠状幼鳍不明显(与母本牙鲆相比)，数量为7-8根。 ③组织学观察发现，其消化系统中胃腺出现较晚，且胃腺发育过程缓慢(与母本牙鲆相比)。甲状腺滤泡增生不明显，颜色较浅，数量较少。杂交鲆在早期发育过程中，并没有出现鳔原基。 3. 条石鲷作为岩礁性的暖水性鱼类，早期发育过程也较为特殊，包括外形以及内部的器官结构。主要特点有： ① 受精卵：受精卵卵黄上具有龟裂结构，为鱼卵的分类特征之一。 ② 初孵仔鱼：初孵仔鱼背鳍膜上的黑色素，从体背面向背鳍膜边缘移动，到3dph仔鱼基本消失，此为本种仔鱼发育所特有的特点。 ③ 后期仔鱼和稚鱼：肠道肌肉层加厚明显，仔稚鱼胃肠排空率急剧上升，死亡率增加，通过改善常规的投饵方式部分解决了这个死亡高峰的问题。在幼鱼初期，牙齿融合为骨喙，为石鲷科鱼类的特征。 ④胸腺上皮分泌细胞：类似的现象同样在虹鳟鱼中发现，但是虹鳟鱼胸腺上皮分泌细胞不如条石鲷的丰富，同样也不如条石鲷的排列整齐，而是零星分布在胸腺上皮与咽腔接触的表面。除了正常的造血器官—脾脏和头肾外，肝脏、胰腺和鳔等多种组织等也出现MMCs，此现象在硬骨鱼类不多见，一般发生在软骨鱼类。

Comparison of effectiveness of different ashing auxiliaries for determination of phosphorus in natural waters, aquatic organisms and sediments by ignition method

An improved method for the determination of phosphorus in natural waters, aquatic organisms and sediments by ignition method is proposed. The recoveries of phosphorus (P) from selected inorganic and organic P-containing compound standards after ignition with different auxiliaries, such as MgSO4, Mg(NO3)(2), MgO2, Mg(Ac-2) and CaCl2, were compared. We found that the phosphorus from most compound standards could not be completely recovered when these compounds were ignited (450-500degreesC) with the MgSO4 as auxiliary and the baked residue was extracted with 0.2 mol l(-1) HCl for 30min at 80degreesC or at room temperature. P recoveries, for example, were poor, less than 85%, if pyrophosphate and metaphosphate were ignited with the addition Of MgSO4 prior to the extraction of the baked residue with 0.2 mol l(-1) HCl at 80degreesC for 30 min. In contrast, MgO2, Mg(Ac)(2) and CaCl2, as well as Mg(NO3)(2), could all yield complete P recoveries at routine ashing temperatures (450-500degreesC). The results demonstrate that MgC12 is a more effective auxiliary agent for the determination of phosphorus in natural waters, aquatic organisms and sediments by ignition method than MgSO4 which is commonly used. (C) 2003 Elsevier Science Ltd. All rights reserved.

Observations on the spawning behavior of artificially matured Japanese eels Anguilla japonica in captivity

Spawning behavior of artificially matured Japanese eels Anguillo japonica in captivity was investigated using a DVD Video image system. Following a routine hormone treatment technique for this fish, female eels were artificially matured by weekly intramuscular injections of salmon pituitary extracts (SPE) at a dosage of 40 mg kg(-1) BW for a total of 7-11 doses to induce ovarian maturation, while male eels received weekly intramuscular injections of human chorionic gonadotropin (HCG) at a dosage of 1000 IU kg(-1) BW for a total of 6-11 doses at 18 degrees C to induce testicular maturation in a separate aquarium. In this experiment, three pairs of such hormone-treated matured eels were acclimatized in seawater in 1.5 m(3) experimental aquaria with or without shelters at 20 degrees C for 24 h. Twenty four hours after the acclimatization terminated, the females received SPE injections to boost maturation and ovulation. Twenty four hours following these injections, the females received injections of HCG (1000 IU per fish, HCG injection) and 17 alpha-hydroxyprogesterone (2 mg per fish) to induce ovulation, while males were given HCG injections (1000 IU per fish, HCG injection) to induce spermiation. Video taping started after the 24 h acclimatization terminated and last for a total of 96 h. Before the HCG injections, both sexes were inactive, staying on the bottom or in shelters if available. Following these HCG injections, they became active and frequently left the bottom swimming in the water column. During the 24 h following HCG injections, activity accounted for 67% and 45% of the total activity in no shelter treatment for females and males, respectively, in comparison with 77% and 78% in shelter treatment. Activity was significantly more pronounced during this phase than during other phases for each sex in either shelter treatment. Egg release and sperm ejection occurred in the water column around the time eels' activity reached peaks. Eels either returned into the shelters or stayed motionlessly on the bottom of the aquaria after egg release and sperm ejection. Eight out of nine (89%) females in no shelter treatment spontaneously released eggs with a total of 11 batches 14-18 h following HCG injections, in contrast with four out of nine (44%) females releasing eggs for 4 batches 16-20 h in shelter treatment. Males arrived at activity peaks 11-13 h following HCG injections in no shelter treatment, 2-4 h ahead of the females (14-16 h), in comparison with 8-11 h in shelter treatment with 5-6 h ahead of the females (14-17 h). Courtship behavior indicative of spawning such as pairing, chasing and touching bodies was not observed in the eels in this study. However, on many occasions, eels of both sexes (male-female or female-female) were found to "cruise together" in water column for a short time period or frequently come together prior to releasing eggs and ejecting sperm, suggesting the possibility of group mating in artificially matured Japanese eels. (c) 2007 Elsevier B.V. All rights reserved.

Temperature influence on the spawning performance of artificially-matured Japanese eel, Anguilla japonica, in captivity

We studied the influence of temperature on the spawning performance of artificially matured Japanese eels, Anguilla japonica, in captivity. We used routine hormone injections to bring females and males to maturity in separate aquaria. We recorded the behavior of three pairs of such hormone-treated matured eels in an aquarium (2 replicates) at four temperatures: 14, 18, 22, and 27 degrees C, respectively. They became active and frequently left the bottom swimming in the water column, and spawning events occurred. Females released eggs in the water column around the activity peaks. Males preceded females in reaching activity peaks (presumably the timing of sperm ejection and egg release), possibly resulting in the low fertilization we observed in this experiment. Males and females returned back to the aquarium bottoms and became quiet after spawning. On several occasions, male-female or female-female pairs were observed to 'cruise together' in the water column for several to tens of seconds prior to egg releasing, but no courtship behavior indicative of spawning such as pairing and chasing was observed in the eels in our study. Our results suggest that 18-22 degrees C might be the thermal preference for spawning for Japanese eels, which approximates the temperature range of the 500 m deep water layer around the Mariana Islands seamount area, the presumed spawning site for the Japanese eel.

Simultaneous enumeration of diatom, protozoa and meiobenthos from marine sediments using Ludox-QPS method

The Ludox-QPS method is a newly developed technique, which combines the Ludox HS 40 density centrifugation and quantitative protargol stain, to enumerate marine ciliates with good taxonomic resolution. We tested the method for simultaneous enumeration of diatoms, protozoa and meiobenthos and compared its extraction efficiency for meiobenthos with that of the routine Ludox-TM centrifugation and a modified protocol using Ludox HS 40. We conducted the evaluation with a sample size of 8.3 ml each from sandy, muddy-sand and muddy sediments collected from the intertidal area of the Yellow Sea in summer 2006 and spring 2007. The Ludox-QPS method not only produced high extraction efficiencies of 97 +/- 1.3% for diatoms and 97.6 +/- 0.8% for ciliates, indicating a reliable enumeration for eukaryotic microbenthos, but also produced excellent extraction efficiencies of on average 97.3% for total meiobenthos, 97.9% for nematodes and 97.8% for copepods from sands, muddy sands and mud. By contrast, the routine Ludox-TM centrifugation obtained only about 74% of total meiobenthos abundance with one extraction cycle, and the modified Ludox HS 40 centrifugation yielded on average 93% of total meiobenthos: 89.4 +/- 2.0% from sands, 93 +/- 4.1% from muddy sands and 97.1 +/- 3.0% from mud. Apart from the sediment type, sample volume was another important factor affecting the extraction efficiency for meiobenthos. The extraction rate was increased to about 96.4% when using the same modified Ludox centrifugation for a 4 ml sediment sample. Besides the excellent extraction efficiency, the Ludox-QPS method obtained higher abundances of meiobenthos, in particular nematodes, than the routine Ludox centrifugation, which frequently resulted in an uncertain loss of small meiobenthos during the sieving process. Statistical analyses demonstrated that there were no significant differences between the meiobenthos communities revealed by the Ludox-QPS method and the modified Ludox HS 40 centrifugation, showing the high efficiency of the Ludox-QPS method for simultaneous enumeration of diatom, protozoa and meiobenthos. Moreover, the comparatively high taxonomic resolution of the method, especially for diatoms and ciliates, makes it feasible to investigate microbial ecology at community level.

An efficient methodology for cryopreservation of spermatozoa of red seabream, Pagrus major, with 2-mL cryovials

The aim of this study was to optimize the cryopreservation protocols for the sperm of red seabream, Pagrus major. The 2-mL cryovials and programmable freezer were employed for cryopreservation. Six extenders, six cryoprotectants in various concentrations ranging from 6 to 20% (v/v), four cooling rates, and three thawing temperatures were evaluated by postthaw sperm motility and fertility. The ratio of sperm to egg for postthaw sperm fertilization trials was experimentally standardized and was optimal at 500:1. The best motility of postthaw sperm (79.4 +/- 4.7% to 88.6 +/- 8.0%), fertilization rates (89.6 +/- 2.9 to 95.6 +/- 1.9%), and hatching rates (85.3 +/- 5.1% to 91.4 +/- 4.3%) were achieved when Cortland extender, dimethyl sulfoxide (15, 18, and 20%) or ethylene glycol (9, 12%) as cryoprotectants, 20 C/min as the cooling rate, and 40 C as the thawing temperature were employed. Moreover, the results on embryonic development were not significantly different between cryopreserved sperm and fresh sperm during incubation process. In conclusion, these methods of cryopreservation of red seabream sperm are suitable for routine aquaculture application and preservation of genetic resources.

A new species and key to known species of genus Oxya Serville (Orthoptera : Acrididae : Catantopinae) from China

During routine identification of the grasshoppers of the Dasa river, Guizhou Province of China in 2004, a new species [ Oxya guizhouensis sp, nov.] of the genus Oxya Serville ( Orthoptera, Acrididae, Catantopinae) was discovered. It is described here. A key to all known species of the genus from China is given. The type specimens are deposited in the Museum of Hebei University (MHU), Baoding, Hebei, China.

基于有限状态机的空间对接仿真平台控制系统设计

给出了一种基于分层式有限状态机的五自由度空间对接仿真平台控制系统设计方法,对状态机进行了扩展定义.增加了一个定义于状态上的变量属性集合,使其有利于系统的代码实现.结合控制系统采用的10 ms定时中断机制,将状态机层次划分到了可以分析每个10 ms硬件中断程序所需实现的控制功能状态及其转移、继承关系的程度,可以更清晰地设计出中断程序所需要的构成结构.系统的实际应用结果证明了上述方法的有效性.