非原生掺杂半绝缘磷化铟（InP）及其应用对比

过去的几年中，由于1.31和1.55μm波长半导体激光器在光纤通信领域得到了广泛的应用，磷化铟（InP）衬底材料的研究和规模化生产因此受到了极大的推动，并已逐步成为继硅（Si）和砷化镓（GaAs）之后又一重要的化合物半导体材料。与GaAs相比，InP晶体具有高的饱和电场漂移速度、良好的导热性和较强的抗辐射能力等优点，因此更适合于制造高频、高速、大功率及外层空间用微波器件和电路。从实际使用的情况看，n和p型InP衬底的性能已基本满足要求，而半绝缘类型衬底则无论从一致性还是均匀性方面都需要较大程度地改善。相应地，这种改善的途径和方法已成为半导体材料的研究热点之一。

Preliminary study of a niobium quarter-wave prototype cavity for a heavy-ion superconducting linac

Superconducting quarter-wave resonators, due to their compactness and their convenient shape for tuning and coupling, are very attractive for low-beta beam acceleration. In this paper, two types of cavities with different geometry have been numerically simulated: the first type with larger capacitive load in the beam line and the second type of lollipop-shape for 100 MHz, beta=0.06 beams; then the relative electromagnetic parameters and geometric sizes have been compared. It is found that the second type, whose structural design is optimized with the conical stem and shaping drift-tube, can support the better accelerating performance. At the end of the paper, some structural deformation effects on frequency shifts and appropriate solutions have been discussed.

管理措施对人工林土壤质量的影响

可持续性生产力是人工林发展的一个关键问题。然而,人工林培育过程中常出现土壤质量退化和人工林生产力下降等问题。管理措施是人工林发展过程中土壤质量变化的一个重要因素,正确的管理措施能够维护和提高林地的土壤质量。管理措施主要包括整地、施肥、林地收获与凋落物管理和营造混交林等。不同的整地方式、整地强度、整地时间等能改变土壤物理、化学和生物学性状,进而对其土壤质量产生一定的影响;施肥措施能改善土壤质量、提高人工林生产力,而过量施肥能够导致林地养分的流失和地下水质的恶化;木材收获和林地凋落物焚烧导致人工林系统养分的大量流失,加强对人工林系统有机物质的保护有利于林地土壤质量的改善;营造混交林在一定程度上有利于土壤质量维护,由于物种间存在复杂的相互关系,其对混交树种、混交方式和立地条件的选择等管理措施均能影响土壤质量。最后,文章对今后人工林管理措施对土壤质量影响的重点研究方向作了展望。

黄土高原南部3种农田土壤剖面坚实度的变化规律

为了揭示黄土高原南部地区不同质地类型土壤剖面坚实度的变化及其与土壤含水率的定量关系,以黄墡土、土娄土、裸露在地表的粘化层耕作剖面为研究对象,定位观测其0~45 cm土壤坚实度与含水率的变化。结果表明,黄墡土、土娄土、裸露在地表粘化层耕作剖面的犁底层平均坚实度均大于耕层,犁底层平均坚实度较耕层分别高194.8%,87.3%,10.4%;剖面土壤质地越粘其平均坚实度越大;土壤坚实度与含水率呈负相关关系;土壤坚实度变化速率为0时,以上3种土壤剖面临界含水率分别为0.1712,0.1757,0.1835;质地不同的土壤剖面坚实度时空变化特征有差异,其中黄墡土剖面0~20 cm土层土壤坚实度为350~500 kPa,受土壤含水率变化的影响较小;20~30 cm土层土壤的坚实度为500~1400 kPa,不易受外界环境影响;30 cm以下土层土壤坚实度为700~1600 kPa,受土壤含水率变化影响较大。土娄土剖面0~40 cm土层土壤坚实度为600~1200 kPa,受含水率变化影响较大;40 cm以下土层土壤坚实度稳定在1 800 kPa左右。粘化层剖面0~15 cm土层土壤坚实度在2000 kPa左右,受环境影响较...

细河河水及其沿岸地下水水质的有机污染特征

调查了沈阳市细河河水及其沿岸地下水水质中石油类和美国环保局(USEPA)"黑名单"上的16种优先控制多环芳烃(PAHs)的有机污染现状,评价细河污染带来的生态风险。结果表明:细河河水中石油类浓度和16种PAHs总浓度范围分别为0.031～1.819mg.L-1和0.026～0.384μg.L-1,平均浓度分别为1.007mg.L-1和0.151μg.L-1;细河沿岸地下水中石油类浓度和16种PAHs总浓度范围分别为0.020～0.987mg.L-1和0.051～0.389μg.L-1,平均浓度分别为0.364mg.L-1和0.133μg.L-1;细河河水和地下水中的石油类污染严重;河水中的PAHs浓度在流经规模较大的城镇或乡镇处出现高值点,苯并(b)荧蒽和苯并(k)荧蒽在河水与地下水中的检出率较高,对水生生态系统健康构成了潜在的威胁。

Influence of annealing on structure of poly(aryl ether ether ketone ketone) revealed by SAXS

Structural studies of poly(aryl ether ether ketone ketone) (PEEKK) using small-angle X-ray scattering and one-dimensional electron density correlation function methods revealed that its aggregated state structure was significantly influenced by the annealing temperature. The long period L, the average thickness of the lamellae d, the electron density difference between the crystalline and amorphous regions eta(c) - eta(a), and the invariant Q increased with increasing annealing temperature, but it was opposite to the case of the specific inner surfaces O-s. A transition zone existed between the traditional "two phases" with a dimension about 0.5 nm for semicrystalline PEEKK. (C) 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 1829-1835, 1998.

Isolation, spectra, structure, and ring-opening polymerization of strained macrocyclic aryl(ether ketone) dimer

Macrocyclic arylene ether ketone dimer was isolated from a mixture of cyclic oligomers obtained by the nucleophilic substitution reaction of bisphenol A and 4,4'-difluorobenzophenone and easily polymerized to high molecular weight linear poly(ether ketone). The cyclic compound was characterized by FTIR, H-1- and C-13-NMR, and single-crystal x-ray diffraction. Analysis of the spectral and crystal structure reveals extreme distortions of he phenyl rings attached to the isopropylidene center and of the turning points of the molecular polygons. The release of the ring strain on ring-opening combined with entropical difference between the linear polymer chain and the more rigid macrocycle at temperatures of polymerization may be the proposed motivating factors in the polymerization of this precursor to high molecular weight poly(ether ketone). (C) 1997 John Wiley & Sons, Inc.