A study of the dependence of ferrocene diffusion on chain length in polymer electrolytes

The diffusion rates of ferrocene have been estimated in five kinds of poly(ethylene glycol) solution, containing the electrolyte LiClO4, by using non-steady-state chronoamperometry. The D-app of ferrocene increases with increasing temperature, and the dependency of D-app on temperature obeys the Williams-Landel-Ferry equation. The D-app of ferrocene decreases with increasing polymer chain length. Both the chain length and temperature dependence conform to a simple free volume model. A relation between current and polymer chain length is suggested at room and high temperatures.

Study on ferrocene derivatives diffusion dynamics in polymer electrolyte by solid-state voltammetry

The diffusion rates of seven ferrocene derivatives have been estimated in polyelectrolyte PEG . LiClO4 by using non-steady-state chronoamperometry. The D-app of ferrocene derivatives increases with temperature, and the dependency of D-app on temperature obeys the Arrhenius equation. The D-app of ferrocene derivatives decreases with increasing size of electroactive species. The Delta D-app values of D-T>Tm and D-Tdependency of D-app on the size of ferrocene at T < T-m is larger than that at T > T-m in the polyelectrolyte. On the other hand, the diffusion behaviour of ferrocene derivatives is qualitatively analyzed by using cyclic voltammetry. Copyright (C) 1996 Elsevier Science Ltd

The synergy between deformation and anodic dissolution of an austenitic stainless steel in acidic chloride solution

In corrosion medium, metals can deform under tensile stress and form a new active surface with the anodic dissolution of the metals being accelerated. At the same time, the anodic dissolution may accelerate the deformation of the metals. The synergy can lead to crack nucleation and development and shorten the service life of the component. Austenitic stainless steel in acidic chloride solution was in active dissolution condition when stress corrosion cracking (SCC) occurred. It is reasonable to assume that the anodic dissolution play an important role, so it's necessary to study the synergy between anodic dissolution and deformation of austenitic stainless steels. The synergy between deformation and anodic dissolution of AISI 321 austenitic stainless steel in an acidic chloride solution was studied in this paper. The corrosion rate of the steel increased remarkably due to the deformation-accelerated anodic and cathodic processes. The creep rate was increased while the yield strength was reduced by anodic dissolution. The analysis by thermal activation theory of deformation showed a linear relationship between the logarithm of creep rate and the logarithm of anodic cur-rent. Besides, the reciprocal of yield strength was also linearly dependent on the logarithm of anodic current. The theoretical deductions were in good agreement with experimental results.

电阻率测井反演方法应用研究

Formation resistivity is one of the most important parameters to be evaluated in the evaluation of reservoir. In order to acquire the true value of virginal formation, various types of resistivity logging tools have been developed. However, with the increment of the proved reserves, the thickness of interest pay zone is becoming thinner and thinner, especially in the terrestrial deposit oilfield, so that electrical logging tools, limited by the contradictory requirements of resolution and investigation depth of this kinds of tools, can not provide the true value of the formation resistivity. Therefore, resitivity inversion techniques have been popular in the determination of true formation resistivity based on the improving logging data from new tools. In geophysical inverse problems, non-unique solution is inevitable due to the noisy data and deficient measurement information. I address this problem in my dissertation from three aspects, data acquisition, data processing/inversion and applications of the results/ uncertainty evaluation of the non-unique solution. Some other problems in the traditional inversion methods such as slowness speed of the convergence and the initial-correlation results. Firstly, I deal with the uncertainties in the data to be processed. The combination of micro-spherically focused log (MSFL) and dual laterolog(DLL) is the standard program to determine formation resistivity. During the inversion, the readings of MSFL are regarded as the resistivity of invasion zone of the formation after being corrected. However, the errors can be as large as 30 percent due to mud cake influence even if the rugose borehole effects on the readings of MSFL can be ignored. Furthermore, there still are argues about whether the two logs can be quantitatively used to determine formation resisitivities due to the different measurement principles. Thus, anew type of laterolog tool is designed theoretically. The new tool can provide three curves with different investigation depths and the nearly same resolution. The resolution is about 0.4meter. Secondly, because the popular iterative inversion method based on the least-square estimation can not solve problems more than two parameters simultaneously and the new laterolog logging tool is not applied to practice, my work is focused on two parameters inversion (radius of the invasion and the resistivty of virgin information ) of traditional dual laterolog logging data. An unequal weighted damp factors- revised method is developed to instead of the parameter-revised techniques used in the traditional inversion method. In this new method, the parameter is revised not only dependency on the damp its self but also dependency on the difference between the measurement data and the fitting data in different layers. At least 2 iterative numbers are reduced than the older method, the computation cost of inversion is reduced. The damp least-squares inversion method is the realization of Tikhonov's tradeoff theory on the smooth solution and stability of inversion process. This method is realized through linearity of non-linear inversion problem which must lead to the dependency of solution on the initial value of parameters. Thus, severe debates on efficiency of this kinds of methods are getting popular with the developments of non-linear processing methods. The artificial neural net method is proposed in this dissertation. The database of tool's response to formation parameters is built through the modeling of the laterolog tool and then is used to training the neural nets. A unit model is put forward to simplify the dada space and an additional physical limitation is applied to optimize the net after the cross-validation method is done. Results show that the neural net inversion method could replace the traditional inversion method in a single formation and can be used a method to determine the initial value of the traditional method. No matter what method is developed, the non-uniqueness and uncertainties of the solution could be inevitable. Thus, it is wise to evaluate the non-uniqueness and uncertainties of the solution in the application of inversion results. Bayes theorem provides a way to solve such problems. This method is illustrately discussed in a single formation and achieve plausible results. In the end, the traditional least squares inversion method is used to process raw logging data, the calculated oil saturation increased 20 percent than that not be proceed compared to core analysis.

恋情嫉妒倾向及其影响因素和影响作用的研究_恋情嫉妒倾向与自尊、社会比较偏好及嫉妒情绪反应之间的关系

As a well-related concept with close relationship, dispositional romantic jealousy (worrying about the romantic relationship will decrease or be threatened because of the rival) is accepted more and more attention. As the first system study on romantic jealousy under Chinese culture, this study use the combinative methods of questionnaire survey and provided situation-imagine design to study the dispositional romantic jealousy and get some conclusions. 1、The structure of the dispositional romantic jealousy in Chinese undergraduate students consist of three factors: suspicion , exclusivity and dependency . The scale of romantic jealousy has good reliability and validity. 2、The dispositional romantic jealousy can well predict the love attitudes and love experiences. The three factors respectively have different relationship with the love attitudes and love experiences. 3、Comparing with the high self-esteem samples, low self-esteem (include explicit self-esteem, and special implicit self-esteem) samples express more dispositional romantic jealousy among some of the three aspects: suspicion , exclusivity and dependency. 4、Those who get high scores on Scale of Social Comparison Orientation have far more remarkable dispositional romantic jealousy than those who get low scores, the difference exits in three factors: suspicion , exclusivity and dependency. 5、The result of SEM tells us that explicit self-esteem and special implicit self-esteem can negetivly predict some of the three factors of the dispositional romantic jealousy. And special implicit self-esteem also can predict the jealous emotional reaction .Social comparison orientation can predict all three factors of the disposition. And all three factors can positively predict jealous emotional reaction. These findings help us identify the structure of the dispositional romantic jealousy and know more about the influence factors of dispositional romantic jealousy. So we can provide an academic reference on the prevention and intervention of the conflicts among marriage and love relationships.

工作社会规范观念的心理学研究与跨文化比较

Data on meaning of working (MOW) were collected from 905 respondents in Beijing area through a stratified sampling procedure of the questionnaire used in the restudy of meaning of working (which is still on going, adapted for using in China). Some parts of the factor structure obtained in this study are similar to what found by the MOW International Research Team (1987). Detailed analysis and cross-cultural comparisons were concentrated on the most similar parts societal norms about working (SNW). T-scores of the obligation norm (ON) and entitlement norm (EN) of Chinese were calculated based on the reaction frequencies of relevant items provided by the MOW International Research Team and shown as follows. The results reveal the obligation orientation characteristic of Chinese respondents. And more, 4 SNW patterns of Chinese respondents were obtained through multivariate cluster analysis and multivariate discrimination analysis and shown as follows. The influences of antecedent variables on SNW and the consequences of SNW were analyzed. Two questions were raised from these analyses: 1) The present measurements of SNW are not able to reflect the nature of the relation and dependency between ON and EN and are not free from social desirability; 2) the relationship between SNW and actual working behaviors need to be tested while the relationship between SNW and several work intentions was confirmed. A forced-choice scale of SNW was designed to overcome the shortcomes of the original scale. This scale includes 30 items. Each item is composed of a ON statement and a EN statement with similar values of social desirability. A repertory grids test was used to exam the constructure validity and to analyze the differences of cognitive structures of the 4 SNW patterns. The results indicated that the new scale had a good discrimination power. An experiment was designed to test the relationship of SNW and the actual work behaviors of the respondents. The respondents' action in completing a task was chosen as working behavior index. 4 hypotheses were tested: 1) higher obligation orientation subjects are more likely to complete tasks no matter overtime; 2) scheduled tasks are more likely to be completed no matter overtime; 3) the obligation norm about working is positively correlated with general obligation norms; and, 4) external motivtors will enhance lower obligation orientation subjects' working motivation more than higher obligation orientation subjects' the results verified hypothesis 1 and 3, but didn't support hypothesis 2 and 4 these findings will have great implication in administrating.

Benzene electro-oxidation in a PEMFC for phenol and electricity cogeneration

In the present investigation, the electrochemically-assisted oxidation of benzene in a H-2-O-2 proton exchange membrane fuel cell (PEMFC) for electricity and phenol cogeneration is studied. Experiments were carried out in a PEMFC electrochemical reactor using Pd black as cathode electrocatalyst at 60 and 80 degrees C, respectively and 1 atm back pressure. Indeed, it was found that the only product detected under the examined experimental conditions was phenol. The online GC product analysis revealed that it is impossible to produce phenol when the fuel cell circuit is open (I = 0) under all the examined experimental conditions. When the fuel cell circuit was closed, however, the phenol yield was found to follow a volcano-type dependence on the cur-rent of the external circuit. It was found that the maximum phenol yield was 0.35% at 100 mA/cm(2) at 80 degrees C. At the same time, the PEMFC performance was also investigated during the phenol generation process. Furthermore, experiments with the rotating ring disc electrode (RRDE) technique showed that the intermediate oxidation product, i.e. H2O2 existed during the oxygen electro-reduction process. The cyclic voltammograms showed that benzene was strongly adsorbed on the Pd surface, leading to a degradation of the PEMFC performance. (c) 2005 Elsevier B.V. All rights reserved.