Improved neutron radiation hardness for Si detectors: Application of low resistivity starting material and or manipulation of N-eff by selective filling of radiation-induced traps at low temperatures

Radiation-induced electrical changes in both space charge region (SCR) of Si detectors and bulk material (BM) have been studied for samples of diodes and resistors made on Si materials with different initial resistivities. The space charge sign inversion fluence (Phi(inv)) has been found to increase linearly with the initial doping concentration (the reciprocal of the resistivity), which gives improved radiation hardness to Si detectors fabricated from low resistivity material. The resistivity of the BM, on the other hand, has been observed to increase with the neutron fluence and approach a saturation value in the order of hundreds k Omega cm at high fluences, independent of the initial resistivity and material type. However, the fluence (Phi(s)), at which the resistivity saturation starts, increases with the initial doping concentrations and the value of Phi(s) is in the same order of that of Phi(inv) for all resistivity samples. Improved radiation hardness can also be achieved by the manipulation of the space charge concentration (N-eff) in SCR, by selective filling and/or freezing at cryogenic temperatures the charge state of radiation-induced traps, to values that will give a much smaller full depletion voltage. Models have been proposed to explain the experimental data.

Segmented All-Platinum Nanowires with Controlled Morphology through Manipulation of the Local Electrolyte Distribution in Fluidic Nanochannels during Electrodeposition

Synthesis of segmented all-Pt nanowires is achieved by a template-assisted method. The combination of a suitably chosen electrolyte/template system with pulse-reverse electrodeposition allows the formation of well-defined segments linked to nanowires. Manipulation of the morphology is obtained by controlling the electrokinetie effects on the local electrolyte distribution inside the nanochannels during the nanowire growth process, allowing a deviation from the continuously cylindrical geometry given by the nanoporous template. The length of the segments can be adjusted as a function of the cathodic pulse duration. Applying constant pulses leads to segments with homogeneous shape and dimensions along most of the total wire length. X-ray diffraction demonstrates that the preferred crystallite orientation of the polycrystalline wires varies with the average segment length. The results are explained considering transitions in texture formation with increasing thickness of the electrodeposit. A mechanism of segment formation is proposed based on structural characterizations. Nanowires with controlled segmented morphology are of great technological importance, because of the possibility to precisely control their substructure as a means of tuning their electrical, thermal, and optical properties. The concept we present in this work for electrodeposited platinum and track-etched polycarbonate membranes can be applied to other selected materials as well as templates and constitutes a general method to controlled nanostructuring and synthesis of shape controlled nanostructures.

Towards manipulation of post-biosynthetic events in secondary metabolism of plant cell cultures

Plant cell cultures have been suggested as a feasible technology for the production of a myriad of plant-derived metabolites. However, commercial application of plant cell culture has met limited success with only a handful of metabolites produced at the pilot- and commercial-scales. To improve the production of secondary metabolites in plant cell cultures, efforts have been devoted predominantly to the optimization of biosynthetic pathways by both process and genetic engineering approaches. Given that secondary metabolism includes-the synthesis. metabolism and catabolism of endogenous compounds by the specialized proteins, this review intends to draw attention to the manipulation and optimization of post-biosynthetic events that follow the formation of core metabolite structures in biosynthetic pathways. These post-biosynthetic events-the chemical and enzymatic modifications, transport, storage/secretion and catabolism/degradation have been largely unexplored in the past. Potential areas are identified where further research is needed to answer fundamental questions that have implications for advanced bioprocess design. Anthocyanin production by plant cell cultures is used as a case study for this discussion, as it presents a good example of compounds for which there are extensive research publications but still no commercial bioprocess. It is perceived that research on post-biosynthetic processes may lead to future opportunities for significant advances in commercial plant cell cultures. (C) 2002 Elsevier Science Inc. All rights reserved.

Manipulation, dissection, and lithography using modified tapping mode atomic force microscope

A modified tapping mode of the atomic force microscope (AFM) was introduced for manipulation, dissection, and lithography. By sufficiently decreasing the amplitude of AFM tip in the normal tapping mode and adjusting the setpoint, the tip-sample interaction can be efficiently controlled. This modified tapping mode has some characteristics of the AFM contact mode and can be used to manipulate nanoparticles, dissect biomolecules, and make lithographs on various surfaces. This method did not need any additional equipment and it can be applied to any AFM system.

Manipulation of electroosmotic flow in capillary electrophoresis for iodide and iodate

Manipulation of electroosmotic flow in capillary electrophoresis is an important step for separation of inorganic anions. The type. and concentration of electroosmotic flow modifier (OFM) exert a tremendous influence on the electroosmotic mobility. In the presence of CTAB as buffer solutions' pH values increase, the electroosmotic mobility becomes lower. At the same ionic strength, the buffer type affects the electroosmotic velocity and the migration order for iodide and iodate.

Research on Q-Switched Nd : YAG laser engraving

IN this paper, the engraving process with Q-Switched Nd:YAG laser is investigated. High power density is the pre- requisition to vapor materials, and high repetition rate makes the engraving process highly efficient. An acousto- optic Q-Switch is applied in the cavity of CW 200 W Nd:YAG laser to achieve the high peak power density and the high pulse repetition rate. Different shape craters are formed in a patterned structure on the material surface when the laser beam irradiates on it by controlling power density, pulse repetition rate, pulse quantity and pulse interval. In addition, assisting oxygen gas is used for not only improving combustion to deepen the craters but also removing the plasma that generated on the top of craters. Off-focus length classified as negative and positive has a substantial effect on crater diameters. According to the message of rotating angle positions from material to be engraved and the information of graph pixels from computer, a special graph is imparted to the material by integrating the Q- Switched Nd:YAG laser with the computer graph manipulation and the numerically controlled worktable. The crater diameter depends on laser beam divergence and laser focal length. The crater diameter changes from 50 micrometers to 300 micrometers , and the maximum of crater depth reaches one millimeter.

High-efficiency volume hologram recording with a pulsed signal beam

We present an efficient photorefractive volume hologram recording technique with a pulsed signal beam and continuous reference-beam illumination. The grating envelope can be simply controlled by manipulation of the duty cycle of the signal beam. Thus, for any grating coupling strength and different initial reference-signal intensity ratios, the diffraction efficiency can be maximized with this technique and can be greatly increased in comparison with that of the conventional recording technique. (C) 1998 Optical Society of America.

Creation of arbitrary coherent superposition states in four-level systems

Using the technique of stimulated Raman adiabatic passage, we propose schemes for creating arbi- trary coherent superposition states of atoms in four-level systems: a A-type system with twofold final states and a four-level ladder system. With the use of a control field, arbitrary coherent superposition states are created without the condition of multiphoton resonance. Suitable manipulation of detunings and the control field can create either a single state or any superposition states desired. (c) 2005 Pleiades Publishing, Inc.

Controllable Kerr nonlinearity with perfect transparency in the existence of spontaneously generated coherence

We investigate the Kerr nonlinearity of a V-type three-level atomic system where the upper two states decay outside to another state and hence spontaneous generated coherence may exist. It is shown that dark state and hence perfect transparency present under certain conditions. Meanwhile, the Kerr nonlinearity can be controlled by manipulation of the decay rates and the splitting of the two excited states. Therefore, enhanced Kerr nonlinearity without absorption can be obtained under proper parameters.

Numerical modeling of optical levitation and trapping of the "stuck" particles with a pulsed optical tweezers

We present the theoretical analysis and the numerical modeling of optical levitation and trapping of the stuck particles with a pulsed optical tweezers. In our model, a pulsed laser was used to generate a large gradient force within a short duration that overcame the adhesive interaction between the stuck particles and the surface; and then a low power continuous - wave (cw) laser was used to capture the levitated particle. We describe the gradient force generated by the pulsed optical tweezers and model the binding interaction between the stuck beads and glass surface by the dominative van der Waals force with a randomly distributed binding strength. We numerically calculate the single pulse levitation efficiency for polystyrene beads as the function of the pulse energy, the axial displacement from the surface to the pulsed laser focus and the pulse duration. The result of our numerical modeling is qualitatively consistent with the experimental result. (C) 2005 Optical Society of America.

Surface planar ion chip for linear radio-frequency Paul traps

We propose a surface planar ion chip which forms a linear radio frequency Paul ion trap. The electrodes reside in the two planes of a chip, and the trap axis is located above the chip surface. Its electric field and potential distribution are similar to the standard linear radio frequency Paul ion trap. This ion trap geometry may be greatly meaningful for quantum information processing.

Three-dimensional micro- and nano-fabrication in transparent materials by femtosecond laser

Femtosecond pulsed lasers have been widely used for materials microprocessing. Due to their ultrashort pulse width and ultrahigh light intensity, the process is generally characterized by the nonthermal diffusion process. We observed various induced microstructures such as refractive-index-changed structures, color center defects, microvoids and microcracks in transparent materials (e.g., glasses after the femtosecond laser irradiation), and discussed the possible applications of the microstructures in the fabrication of various micro optical devices [e.g., optical waveguides, microgratings, microlenses, fiber attenuators, and three-dimensional (3D) optical memory]. In this paper, we review our recent research developments on single femtosecond-laser-induced nanostructures. We introduce the space-selective valence state manipulation of active ions, precipitation and control of metal nanoparticles and light polarization-dependent permanent nanostructures, and discuss the mechanisms and possible applications of the observed phenomena.

桃和苹果库源关系中源叶光合作用，光抑制及其光保护机制的研究

以‘早久保’（Prunus persica (L.) Batch.）为试材，在果实最后迅速生长期，通过去果处理降低库力，同时设留果对照，并通过环剥和保留相同数量叶片严格控制库源关系，进行了源叶净光合速率（Pn）、叶绿素荧光、叶黄素循环、抗氧化酶及抗氧化同化物日变化的研究。结果表明，和留果对照相比，去果处理显著降低了源叶Pn、气孔导度（gs）和蒸腾速率（E），但显著增加了胞间二氧化碳浓度（Ci）、叶面饱和蒸汽压亏缺（VPDl）和叶片温度（Tl）。光系统II光化学效率（ΦPSII）以及羧化速率（CE）与Pn平行降低。中午去果降低Pn主要归因于非气孔限制。在低库需条件下，开放的PSII反应中心捕获能量的降低以及关闭的PSII反应中心的增加导致了ΦPSII的降低。去果处理叶片中依赖于叶黄素循环的热耗散以及抗氧化系统的上调保护叶片免受光氧化破坏。和留果对照相比，去果处理的叶片有更大的叶黄素循环库，更高的脱环氧化状态以及更高的抗氧化酶活性，包括超氧化物歧化酶（SOD）、抗坏血酸过氧化物酶（APX）、单脱氢抗坏血酸还原酶（MDAR）和脱氢抗坏血酸还原酶（DHAR）的活性以及更高的还原型抗坏血酸（AsA）和还原型谷胱甘肽（GSH）的含量。但与此同时，去果显著增加了过氧化氢（H2O2）以及丙二醛（MDA）的含量，这意味着在去果处理的叶片中可能会发生光氧化破坏。 以一年生‘皇家嘎拉’苹果（Malus domestica Borkh.）组培苗为试材，通过环剥降低库力，进行了源叶Pn、叶绿素荧光、核酮糖-1,5-二磷酸羧化酶/氧化酶（Rubisco）以及光系统II（PSII）复合体关键蛋白PsbA和PsbO含量日变化的研究。和对照相比，环剥显著降低了源叶Pn、gs和E，但是却显著增加了Ci、Tl和淀粉的含量。在低库需下，开放的PSII反应中心捕获能量的降低以及关闭的PSII反应中心的增加导致了ΦPSII的降低。另一方面，环剥降低了光合作用关键酶Rubisco以及PSII复合体PsbA和放氧复合体PsbO的含量。以上结果表明，环剥降低Pn主要归因于非气孔限制。

Establishment, characterization, and virus susceptibility of a new marine cell line from red spotted grouper (Epinephelus akaara)

A marine fish cell line from the snout of red spotted grouper Epinephelus akaara, a protogynous hermaphrodite, was established, characterized, and subcultured with more than 60 passages. The grouper snout cell line (GSC) cells multiplied well in Dulbecco's modified Eagle's medium (DMEM) medium supplemented with 10% fetal bovine serum. The optimal growth temperature was 25 degrees C, and morphologically the cells were fibroblastic. Chromosome analysis revealed that the GSC cell line has a normal diploid karyotype with 2n = 8st + 40t. A virus titration study indicated that the cells were susceptible to turbot Scophthalmus Maximus rhabdovirus (SMRV) (10(8.5) TCID50 ml(-1)), while the viral titer of frog Rana grylio virus 9807 (RGV(9807)) reached 10(3.5) TCID50 ml-1. The infection was confirmed by cytopathic effect (CPE), immunofluorescence, and electron microscopy experiments, which detected the viral particles in the cytoplasm of virus-infected cells, respectively. Further, significant fluorescent signals were observed when the GSC cells were transfected with pEGFP vector DNA, indicating their potential utility for transgenic and genetic manipulation studies.

Molecular cytogenetic detection of paternal chromosome fragments in allogynogenetic gibel carp, Carassius auratus gibelio Bloch

In gynogenesis, sperm from related species activates egg and embryonic development, but normally does not contribute genetically to the offspring. In gibel carp, Carassius auratus gibelio Bloch, however, gynogenetic offspring often show some phenotypes apparently derived from the heterologous sperm donor. This paternal effect of allogynogenesis is outstanding in an artificial clone F produced by cold treatment of clone E eggs after insemination with blunt-nose black bream (Megaloabrama amblycephala Yin) sperm. Karyotype analysis revealed 5-15 supernumerary microchromosomes in different individuals of clone F in addition to 156 normal chromosomes inherited from the maternal clone E. A painting probe was prepared from the microdissected microchromosomes, and used to investigate the origin of these microchromosomes. Strong positive signals were detected on each microchromosomes of clone F and on 4 pairs of chromosomes in blunt-nose black bream, whereas no signals were detected on the chromosomes of clone E. This result indicates that some paternal chromosome fragments of blunt-nose black bream have been incorporated into the artificial clone F. Therefore, the manipulation of allogynogenesis may provide a unique method to transfer DNA between diverse species for fish breeding.