云南岩石圈流变学及多震层孕震环境

The Study on rheology of the lithosphere and the environments of the seismogenic layer is currently the basic project of the international earthquake research. Yunnan is the ideal place for studying this project. Through the multi-disciplinary comprehensive study of petrology, geophysics, seismo-geology, rock mechanics, etc., the depth-strength profiles of the lithosphere have been firstly constructed, and the seismogenic layer and its geophysical and tectonic environments in Yunnan have been systematically expounded in this paper. The related results achieved are of the important significances for further understanding the mechanism of strong earthquake generation, dividing the potential foci and exposing recent geodynamical processes in Yunnan. Through the comprehensive contrast of the metamorphic rocks in early and middle Proterozoic outcropping on the surface, DSS data and experimental data of rock seismic velocity under high temperature and high pressure, the petrological structure of the crust and upper mantle has been studied on Yunnan: the upper, middle and lower crust is composed of the metamorphic rocks of greenschist, amphibolite and granulite facies, respectively or granitoids, diorites and gabbros, respectively, and the upper mantle composed of the peridotites. Through the contrast studies of the heat flow and epicenters of the strong earthquakes, the distribution of the geotemperature and the data of focal depth, the relationship of between seismicity and geothermal structure of the lithosphere in Yunnan has been studied: the strong earthquakes with magnitude M ≥ 6.0 mainly take place at the geothermal gradient zone, and the seismic foci densely distribute between 200～500 ℃ isogeotherms. On the basis of studies of the rock properties and constituents of the crust and upper mantle and geothermal structure of the lithosphere, the structure of the rheological stratification of the lithosphere has been studied, and the corresponding depth-strength profiles have been constructed in Yunnan. The lithosphere in majority region of Yunnan has the structure of the rheological stratification, i.e. the brittle regime in the upper crust or upper part of the upper crust, ductile regime in the middle crust or lower part of the upper crust to middle crust, ductile regime in the lower crust and ductile regime in the subcrustal lithosphere. The rheological stratification has the quite marked lateral variations in the various tectonic units. The distributions of the seismogenic layer have been determined by using the high accurate data of focal depth. Through the contrast of the petrological structure, the structure of seismic velocity, electric structure, geotemperature structure, and rheological structure and the study of the focal mechanism in the seismogenic layer, the geophysical environments of the seismogenic layer in Yunnan have been studied. The seismogenic layer in Yunnan is located at the depths of 3 ～ 20 km; the rocks in the seismogenic layer are composed of the metamorphic rocks of greenschist to amphibolite facies (or granites to diorites); the seismogenic layer and its internal focal regions of strong earthquakes have the structure of medium properties with the relatively high seismic velocity, high density and high resistivity; there exists the intracrustal low seismic velocity and high conductivity layer bellow the seismogenic layer, the geotemperature is generally 100～500 ℃ in the depth range in which the seismogenic layer is located. The horizontal stress field predominates in the seismogenic layer, the seismogenic layer corresponds to the brittle regime of the upper crust or brittle regime of the upper crust to semibrittle regime of the middle crust. The formation of the seismogenic layer, preparedness and occurrence of the strong earthquakes is the result of the comprehensive actions of the source fault, rock constituent, structure of the medium properties, distribution of the geotemperature, rheological structure of the seismogenic layer and its external environments. Through the study of the structure, active nature, slip rate, segmentation of the active faults, and seismogenic faults, the tectonic environments of the seismogenic layer in Yunnan have been studied. The source faults of the seismogenic layer in Yunnan are mainly A-type ones and embody mainly the strike slip faults with high dip angle. the source faults are the right-lateral strike slip ones with NW-NNW trend and left-lateral strike slip ones with NE-NEE trend in Southwestern Yunnan, the right-lateral strike slip ones with NNW trend and left-lateral strike slip ones with NNE trend (partially normal ones) in Northwestern Yunnan, the right-lateral strike slip ones with NWW trend in Central Yunnan and left-lateral strike slip ones with NW-NNW trend in Eastern Yunnan. Taking Lijiang earthquake with Ms = 7.0 for example. The generating environments of the strong earthquake and seismogenic mechanical mechanism have been studied: the source region of the strong earthquake has the media structure with the relatively high seismic velocity and high resistivity, there exists the intracrustal low velocity and high conductivity layer bellow it and the strong earthquakes occur near the transitional zone of the crustal brittle to ductile deformation. These characteristics are the generality of the generating environments of strong earthquakes. However, the specific seismogenic tectonic environments and action of the stress field of the seismic source in the various regions, correspondingly constrains the dislocation and rupture mechanical mechanism of source fault of strong earthquake.

晚中新世以来中国北方风成沉积的磁性地层学和沉积学研究

The past two decades have witnessed an unprecedented growth of interest in the palaeoenvironmental significance of the Pleistocene loess deposits in northern China. However, it is only several years ago that the Tertiary red clay sequence underlying Pleistocene loess attracted much attention. One of the major advances in recent studies of eolian deposits on the Loess Plateau is the verification of the eolian origin for the Tertiary red clay sediments. The evidence of the eolian origin for the red clay is mainly from geochemical and sedimentological studies. However, sedimentological studies of the red clay deposits are still few compared with those of the overlying loess sediments. To date, the red clay sections located near Xifeng, Baoji, Lantian, Jiaxian, and Lingtai have been studied, with an emphasis on magnetostratigraphy. These sections have a basal age ranging from ～4.3 Ma to ～7.0 Ma. The thickness of the sections varies significantly, depending perhaps on the development of local geomorphological conditions and the drainage system. Although the stratigraphy of the red clay sections has been recorded in some detail, correlation of the red clay sequences has not yet been undertaken. Geological records (Sun J. et al., 1998) have shown that during glacial periods of the Quaternary the deserts in northem China were greatly expanded compared with modern desert distribution. During interglacial periods, desert areas contracted and retreated mostly to northwestern China because of the increase in inland penetration of monsoonal precipitation. According to pedogenic characteristics of the red clay deposits, the climatic conditions of the Loess Plateau is warmer and wetter generally in the Neogene than in the late Pleistocene. Panicle analyses show that grain size distribution of the red clay sequence is similar to that of the paleosols in the Pleistocene loess record, thus implying a relatively remote provenance of the red clay materials. However, the quantitative or semiquantitative estimates of the distance from the source region to the Loess Plateau during the red clay development remains to be investigated. In this study, magnetostratigraphic and sedimentological studies are conducted at two thick red clay sequences-Jingchuan and Lingtai section. The objectives of these studies are focused on further sedimentological evidence for the eolian origin of the red clay, correlation of red clay sequences, provenance of the red clay, and the palaeoclimate reconstruction in the Neogene. Paleomagnetic studies show that the Jingchuan red clay has a basal age of 8.0 Ma, which is 1 million years older than the previously studied Lingtai section. The Lingtai red clay sequence was divided into five units on the basis of pedogenica characteristics (Ding et al., 1999a). The Jingchuan red clay sequence, however, can be lithologically divided into six units according to field observations. The upper five units of the Jingchuan red clay can generally correlate well with the five units of the Lingtai red clay. Comparison of magnetic susceptibility and color reflectance records of four red clay sections suggests that the Lingtai red clay sequence can be the type-section of the Neogene red clay deposits in northern China. Pleistocene loess and modem dust deposits have a unimodal grain-size distribution. The red clay sediments at Jingchuan and Lingtai also have a unimodal grain-size distribution especially similar to the paleosols in the Pleistocene loess record. Sedimentological studies of a north-south transect of loess deposits above S2 on the Loess Plateau show that loess deposits had distinct temporal and spatial sedimentary differentiation. The characteristics of such sedimentary differentiation can be well presented in a triangular diagram of normalized median grain size, normalized skewness, and normalized kurtosis. The triangular diagrams of the red clay-loess sequence at Lingtai and Jingchuan indicate that loess-paleosol-red clay may be transported and sorted by the same agent wind, thus extending the eolian record in the Loess Plateau from 2.6 Ma back to about 8.0 Ma. It has been recognized that during the last glacial maximum (LGM) the deserts in northern China had a distribution similar to the present, whereas during the Holocene Optimum the deserts retreated to the area west of the Helan Mountains. Advance-retreat cycles of the deserts will lead to changes in the distance of the Loess Plateau to the dust source regions, thereby controlling changes in grain size of the loess deposited in a specific site. To observe spatial changes in sedimentological characteristics of loess during the last glacial-interglacial cycle, the texture of loess was measured along the north-south transect of the Loess Plateau. Since the southern margin of the Mu Us desert during the LGM is already known, several models of grain size parameters versus the minimum distance from the source region to depositional areas were developed. According to these semiquantitative models, the minimum distance from the source region to Lingtai and Jingchuan areas is about 600 km during the Neogene. Therefore the estimated provenance of the Tertiary red clay deposits is the areas now occupied by the Badain Jaran desert and arid regions west of it. The ratio of the free iron to total iron concentration attests to being a good proxy indicator for the summer monsoon evolution. The Lingtai Fe_20_3 ratio record shows high values over three time intervals: 4.8-4.1 Ma, 3.4-2.6 Ma, and during the interglacial periods of the past 0.5 Ma. The increase in summer monsoon intensity over the three intervals also coincides with the well-developed soil characteristics. It is therefore concluded that the East-Asia summer monsoon has experienced a non-linear evolution since the late Miocene. In general, the East Asia summer monsoon was stronger in Neogene than in Quaternary and the strongest East Asia summer monsoon may occur between 4.1 and 4.8 Ma. The relatively small ice volume and high global temperature may be responsible for the strong summer monsoon during the early Pliocene.

黄土高原粉尘堆积源区环境及风化历史初步研究

In this study, we examined the surface features of quartz grains, the quartz oxygen isotopic ratios and the mineralogical compositions of the loess - paleosol - red clay sediments systematically. The surface features of quartz grains do not show significant changes of the dust deposits through the past seven million years. The particles were mainly created in the process of glacial and frost weathering of high mountains. Then the surfaces were altered in some degree by the flood and wind abrasion. The surface features registered all these processes. The assemblages of surface features changed for four times in the past seven million years, the occurrence ages are: 5.0~4.2MaBP, about 3.6MaBP, about 2.6MaBP and about 0.9MaBP, respectively. This may indicate that there were uplift events of the Tibetan Plateau during those times. The oxygen isotopic compositions of quartz in the sediments represent the oxygen isotopic compositions of the initial dusts because of the stable properties of quartz both physically and chemically. The oxygen isotopic compositions of 4~16um quartz changed significantly at about 2.6MaBP, decreasing from about 19.5%o to about 18.5%o. This decrease of quartz oxygen isotopic ratio suggests that the environments of the dust source areas changed at that time, or the range of dust source area changed at that time. The environmental change may result from the structural evolution of the Tibetan Plateau and global cooling at that time. The coarse fractions (>30μm) of the dust deposits were examined using the EDXA device for mineral identification. The quartz content has a decrease trend during 7~2MaBP, then increase rapidly at about 2MaBP. After 2MaBP, quartz content continues to decrease. The Ca-plagioclase content / quartz content ratio increase at about 3.6MaBP. The ratio shows a peak of 3-6 fold values at about 2.5~1.8MaBP, the cause of this is still unknown. The Ca-plagioclase content / quartz content ratio continues to increase after 1 MaBP. The flowing can be regarded as the conclusion remarks of this study: Some of the red clay sediment of the Chinese Loess Plateau (at least Lingtai and Jingchuan red clays) is eolian in origin. The quartz grains from dust deposits throughout the past seven million yeas showed the clues of glacial and frost processes. This indicates that the high mountains of western China reached a certain altitude to favor the glacial and/or frost processes at least seven millions years before. The weathering intensities of the past seven nnillion yeas have a decreasing trend. In about 5~4.5MaBP, the weathering is relatively weak, and the dust supply is relatively low. At about 3.6MaBP and 2.6MaBP, the dust supply increased significantly. The mineralogical composition, the quartz surface feature and the quartz oxygen isotope composition were influenced by the uplift of the Tibetan Plateau. The Plateau may have reached a certain altitude to generate the arid regions of inland China and favor the glacial and frost weathering. And it underwent a phased uplift, which have uplift events at about 3.6MaBP and 2.6MaBP.

7.0Ma以来中国黄土粉尘源区的化学风化历史研究-Sr同位素比值的证据

To investigate the changes in the chemical weathering intensity of dust source region in Asia continent, ~(87)Sr/~(86)Sr ratios of acid-washed residues from the loess deposits in China and Tajikistan were analyzed, respectively. The results and conclusions are listed as below. 1. The oscillation of ~(87)Sr/~(86)Sr ratios of acid-insoluble residues in the Chinese Loess Plateau was mainly attributed to the chemical weathering intensity of the source region and the grain size. Counteracted the effect of particle size, the calibrated 87Sr/S6Sr ratio can be used as a proxy for the chemical weathering intensity of the source region. 2. The Sr/ Sr ratios of red clay-loess sequence from the Loess Plateau indicate that the chemical weathering intensity of the dust source region between 7.0 and 2.6 Ma is stronger than that in the Quaternary period. This also suggests a general decline in chemical weathering intensity of the source region from 2.6 Ma to the present. Such pattern is more remarkable since 1.0 Ma BP. 3. The ~(87)Sr/~(86)Sr ratios of the Tajik loess during 0.8-1.8 Ma is much more higher than those from 0.8 Ma to the present. This implies that the chemical weathering intensity of the source region in Central Asia is much stronger during 0.8-1.8 Ma than the period since 0.8 Ma. 4. The record of Sr isotope ratios from both sections shows an accelerating course of aridity of the Asian dust source region over the Quaternary period.

Source of a floating dust episode over the Qingdao region and dust throughput to the ocean

A floating dust weather happened on March 11-12, 1995 over the Qingdao region. Its sources and throughput to the ocean were studied. The result indicated that the floating dust was caused by the dust storm that starred in northwestern China and developed in northern China. 21 x 10(6)t fine soil particles were carried to the ocean during the episode.

Flow properties of a dusty-gas point source in a supersonic free stream

By using Lagrangian method, the flow properties of a dusty-gas point source in a supersonic free stream were studied and the particle parameters in the near-symmetry-axis region were obtained. It is demonstrated that fairly inertial particles travel along oscillating and intersecting trajectories between the bow and termination shock waves. In this region,formation of "multi-layer structure" in particle distribution with alternating low- and highdensity layers is revealed. Moreover, sharp accumulation of particles occurs near the envelopes of particle trajectories.

Time and space-resolved measurement of a gas-puff laser-plasma x-ray source

The dynamic interaction processes between a nano-second laser pulse and a gas-puff target, such as those of plasma formation, laser heating, and x-ray emission, have been investigated quantitatively. Time and space-resolved x-ray and optical measurement techniques were used in order to investigate time-resolved laser absorption and subsequent x-ray generation. Efficient absorption of the incident laser energy into the gas-puff target of 17%, 12%, 38%, and 91% for neon, argon, krypton, and xenon, respectively, was shown experimentally. It was found that the laser absorption starts and, simultaneously, soft x-ray emission occurs. The soft x-ray lasts much longer than the laser pulse due to the recombination. Temporal evolution of the soft x-ray emission region was analyzed by comparing the experimental results to the results of the model calculation, in which the laser light propagation through a gas-puff plasma was taken into account. (C) 2003 American Institute of Physics.

The influence of topography and land use on water quality of Xiangxi River in Three Gorges Reservoir region

A self-organizing map (SOM) was used to cluster the water quality data of Xiangxi River in the Three Gorges Reservoir region. The results showed that 81 sampling sites could be divided into several groups representing different land use types. The forest dominated region had low concentrations of most nutrient variables except COD, whereas the agricultural region had high concentrations of NO3N, TN, Alkalinity, and Hardness. The sites downstream of an urban area were high in NH3N, NO2N, PO4P and TP. Redundancy analysis was used to identify the individual effects of topography and land use on river water quality. The results revealed that the watershed factors accounted for 61.7% variations of water quality in the Xiangxi River. Specifically, topographical characteristics explained 26.0% variations of water quality, land use explained 10.2%, and topography and land use together explained 25.5%. More than 50% of the variation in most water quality variables was explained by watershed characteristics. However, water quality variables which are strongly influenced by urban and industrial point source pollution (NH3N, NO2N, PO4P and TP) were not as well correlated with watershed characteristics.

Cloning, characterization and expression analysis of SIMP (source of immunodominant MHC-associated peptides) in grass carp Ctenopharyngodon idella

SIMP (source of immunodominant MHC-associated peptides) plays a key rote in N-linked glycosylation with the active site of oligosaccharyltransferase, being the source of MHC-peptides in the MHC I presentation pathway. In the present study, the SIMP gene has been cloned from grass carp Ctenopharyngodon idella by rapid amplification of cDNA ends (RACE). The full length of the cDNA sequence is 4384 bp, including a 1117 bp 5' UTR (untranslated region), a 2418 bp open reading frame, and a 849 bp 3' UTR. The deduced amino acids of the grass carp SIMP (gcSIMP) are a highly conserved protein with a STT3 domain and 11 transmembrane regions. The gcSIMP spans over more than 24,212 bp in length, containing 16 exons and 15 introns. Most encoding exons, except the first and the 15th, have the same length as those in human and mouse. The gcSIMP promoter contains many putative transcription factor binding sites, such as Oct-1, GCN4, YY1, Sp1, Palpha, TBP, GATA-1, C/EBP beta, and five C/EBP alpha binding sites. The mRNA expression of gcSIMP in different organs was examined by real-time PCR. The gcSIMP was distributed in all the organs examined, with the highest level in brain, followed by the level in the heart, liver, gill, trunk kidney, muscle, head kidney, thymus, and the lowest level in spleen. Furthermore, the recombinant gcSIMP has been constructed successfully and expressed in Escherichia coli by using pQE-40 vector, and the polyclonal antibody for rabbit has been successfully obtained, which was verified to be specific. Identification of gcSIMP will help to explore the function in fish innate immunity. (c) 2007 Elsevier Ltd. All rights reserved.

In situ doping control for growth of n-p-n Si/SiGe/Si heterojunction bipolar transistor by gas source molecular beam epitaxy

N-p-n Si/SiGe/Si heterostructures have been grown by a disilane (Si2H6) gas and Ge solid sources molecular beam epitaxy system using phosphine (PH3) and diborane (B2H6) as n- and p-type in situ doping sources, respectively. Adopting an in situ doping control technology, the influence of background B dopant on the growth of n-Si emitter layer was reduced, and an abrupt B dopant distribution from SiGe base to Si emitter layer was obtained. Besides, higher n-type doping in the surface region of emitter to reduce the emitter resist can be realized, and it did not result in the drop of growth rate of Si emitter layer in this technology. (C) 2004 Elsevier B.V. All rights reserved.

Land use and water quality response in the northern region of Changxing County

In this paper, taking the northern region of Changxing County for example, with ammonia nitrogen as a pollution assessment index, we used an improved export coefficient method for estimate polluting load of non-point source pollution (NSP) and the social pollution survey data in the study area to estimate point source pollution. By comparing the total pollution output and the national surface water environmental quality standards find that the whole study area achieves the second water quality standard. However, Jiapu Township exceeds the water quality standards seriously because of the superfluous point source pollution. The water quality of other Townships is good. Further analysis showed that different types of land use and proportions in the northern region of Changxing County have a significant impact on the non-point source pollution, the general law is farmland contributes the largest share of the non-point source pollution output, followed by residential area and bare land, besides, with the increase in the proportion of forest and the decrease of farmland and residential area, the non-point source pollution reduces gradually. © 2010 IEEE.