PEG-supported dipyridyl ligand for palladium-catalyzed Suzuki and Suzuki-type reactions in PEG and aqueous media

An air- and water-stable PEG-supported bidentate nitrogen ligand is prepared and its applications in the palladium-catalyzed Suzuki reaction of aryl halides with arylboronic acids in PEG and Suzuki-type reaction of aryl halides with sodium tetraphenylborate in aqueous media are reported. The homogeneous catalyst system is environmentally friendly and offers the advantages of high activity, reusability and easy separation.

Morphology, structure, and properties of in situ compatibilized linear low-density polyethylene/polystyrene and linear low-density polyethylene/high-impact polystyrene blends

Blends of linear low-density polyethylene (LLDPE) with polystyrene (PS) and blends of LLDPE with high-impact polystyrene (HIPS) were prepared through a reactive extrusion method. For increased compatibility of the two blending components, a Lewis acid catalyst, aluminum chloride (AlCl3), was adopted to initiate the Friedel-Crafts alkylation reaction between the blending components. Spectra data from Raman spectra of the LLDPE/PS/AlCl3 blends extracted with tetrahydrofuran verified that LLDPE segments were grafted to the para position of the benzene rings of PS, and this confirmed the graft structure of the Friedel-Crafts reaction between the polyolefin and PS. Because the in situ generated LLDPE-g-PS and LLDPE-g-HIPS copolymers acted as compatibilizers in the relative blending systems, the mechanical properties of the LLDPE/PS and LLDPE/HIPS blending systems were greatly improved. For example, after compatibilization, the Izod impact strength of an LLDPE/PS blend (80/20 w/w) was increased from 88.5 to 401.6 J/m, and its elongation at break increased from 370 to 790%. For an LLDPE/HIPS (60/40 w/w) blend, its Charpy impact strength was increased from 284.2 to 495.8 kJ/m(2). Scanning electron microscopy micrographs showed that the size of the domains decreased from 4-5 to less than 1 mum, depending on the content of added AlCl3.

Catalytic behavior of concentrated heteropolyacid solution in acylation of anisole with acetic anhydride

The catalytic behavior of concentrated heteropolyacid solution in acylation. of anisole with acetic anhydride has been investigated under the reaction conditions such as molar ratio of anisole to acetic anhydride, reaction temperature and mass ratio of reactant to catalyst. When the molar ratio of anisole to acetic anhydride is changed from 2:1 to 1:1, the yield of methoxyacetophenone (MOAP) increases a little, but when it is changed from 1: 1 to 1: 2, the yield has a greater increase from 15% to 30%. The yield of MOAP at the reaction temperature of 363 K doubles that at 333 K. The highest yield is obtained when the mass ratio of reactant to catalyst is 12.8. The conclusion is therefore that the heteropolyacid in acetic acid can effectively catalyze the acylation of anisole with acetic anhydride, and its activity and selectivity are comparable to those of acid clay and molecular sieve.

Lipase-catalyzed regioselective acylation of diosgenyl saponins

Diosgenyl saponins were regio selectively acylated by Novozyme 435 with vinyl esters as acylating agents in THF to afford the corresponding mono- or diacyl diosgenyl saponins. (C) 2001 Elsevier Science Ltd. All rights reserved.

Pressure Drop of Bubbly Two-Phase Flow in a Square Channel at Reduced Gravity

A new set of experimental pressure drop data, collected aboard the Russian IL-76MDK, is reported for bubbly airwater two-phase flow in a square channel with a cross-sectional area of 12x 12mm(2). The present data are compared to several frequently used empirical models, e.g. homogeneous model, Lockhart-Martinelli-Chisholm correlation and Friedel's model. It is shown that the predictions of the models mentioned above are generally not satisfied. A new homogeneous model is developed based on the analysis of the characteristics of bubbly two-phase flow at reduced gravity. It is tested with the present data and other data collected by other researchers in circular pipes. Some questions related to the present model are also discussed. (C) 2002 COSPAR. Published by Elsevier Science Ltd. All rights reserved.

环糊精衍生物的设计、合成及其对环辛烯光异构化研究

环糊精(Cyclodextrins, CDs)经化学修饰后可以得到各种类型的衍生物，不仅可以扩展其原有的键合能力，而且还可以改变其选择性，是当代超分子化学的一个研究热点。环糊精第二面的仲羟基比第一面的伯羟基有着更好的催化性能，第二面的选择性修饰将产生更多有价值的衍生物，可用于催化、酶模拟、手性识别等方面。 取代苯甲酰基修饰环糊精对顺式环辛烯(cis-cyclooctene)光异构化反应有非常重要的影响作用，苯环上取代基的性质和取代位置与产物的%ee值和对映体构型之间存在某种内在联系。有目的地选择适宜取代基，设计、合成新型环糊精光增感剂, 有可能按预定目的得到更高%ee值的反式环辛烯；同时，取代苯甲酰基修饰环糊精对cis-cyclooctene光异构化的增感机理有待于进一步阐明。 本论文工作对环糊精的化学修饰以及超分子体系对cis-cyclooctene不对称光异构化反应方面的进展进行了调研。合成了一系列单-6-位取代苯甲酰基修饰环糊精，用于cis-cyclooctene光异构化增感反应，并用圆二色光谱滴定法研究这些环糊精衍生物与cis-cyclooctene的相互作用，以探索光增感反应机理。在此基础上，探讨了环糊精第二面的选择性修饰方法。内容主要包括： 1. 简要介绍了超分子化学的概况，并对环糊精的选择性修饰方法和超分子体系对cis-cyclooctene不对称光异构化反应的主要成果和最新进展进行了评述。 2. 合成了12种单-6-O-(取代苯甲酰基)-β-环糊精，其中10种为新化合物。采用紫外光谱、红外光谱、核磁共振波谱以及质谱等手段对化合物的结构进行了表征。 3. 探索了直接选择性修饰环糊精第二面的便捷新方法。用取代苯甲酰咪唑酯为酰化试剂，0.2M碳酸盐缓冲溶液(pH=9.9)作催化剂，能够有效地活化2-位仲羟基，对环糊精第二面进行选择性修饰，此方法既简便又经济；同时，发现取代苯甲酰基能够在β-CD第二面的2-位、3-位羟基间相互迁移。 4. 用单-6-O-(取代苯甲酰基)-β-环糊精作光增感剂，对cis-cyclooctene光异构化反应进行研究。实验结果证明：取代苯甲酰基上的取代基性质、位置、长度对反应的对映选择性有很大影响；此外，反应体系溶剂极性对产物的%ee值和对映体构型也有重大影响。用单-6-O-(3-甲氧苯甲酰基)-β-CD作增感剂，cis-cyclooctene光异构化反应产物(R)-trans-cyclooctene的对映选择性为45.8%ee，是到目前为止取得的最好对映选择性。 5. 采用圆二色光谱滴定法研究环糊精衍生物与cis-cyclooctene的相互作用，计算包结物的平衡常数，研究包结物的相对稳定性，为探索光增感反应机理提供基础。我们猜测：电子效应对cis-cyclooctene光异构化反应的影响，可能比取代基位置对反应的影响更大，借助电子效应有希望获得更高的%ee值。 Cyclodextrins can be subjected to diverse modifications to give a wide variety of cyclodextrin derivatives, which could not only extend their original molecular binding ability, but also alter their molecular selectivity. Therefore, cyclodextrin chemistry is currently a significant topic in supramolecular chemistry. The more open secondary hydroxyl side of CDs is stated to be catalytically very important, modifications of this face are believed to produce valuable derivatives for catalysis, enzyme mimic, chiral discrimination, etc. Mono-6-O-(substituted benzoyl)-β-CDs as novel supramolecular photosensitizing hosts have recently excited considerable attention in photochirogenesis. The supramolecular photosenstization of cis-cyclooctene mediated by them gave chiral trans-cyclooctene, enantiomeric excess of which was critically affected by the substituent introduced to the sensitizer moiety. In order to enhance the photoenantiodifferentiating ability, and elucidate the origin mechanisms of substituent-dependent enantioselectivity, in this work a series of mono-6-O-(substituted benzoyl)-β-CDs have been synthesized, and applied for enantiodifferentiating photoisomerization of cis-cyclooctene. The major contents are as follows: 1. The general aspects of supramolecular chemistry were descibed briefly. The new progress and important achievements on methods of selective modification of cyclodextrin and supramolecular enantiodifferentiating photoisomerization of cis-cyclooctene were reviewed. 2. Twelve mono-6-O-(substituted benzoyl)-β-CDs including ten novel compounds have been synthesized. Their structures have been characterized by using UV-vis, IR, NMR and MS methods. 3. A new convenient strategy for direct acylation of β-cyclodextrin on the secondary hydroxyl face was achieved by using the combination of N-benzoylimidazole and carbonate buffer in DMF, and the acyl migration between the C-2 and C-3 hydroxyl groups of β-cyclodextrin was found. 4. Experiments using mono-6-O-(substituted benzoyl)-β-CDs as chiral sensitizing hosts for mediating the enantiodifferentiating photoisomerization of cis-cyclooctene, were carried out. The results indicate that enantiomeric excess was critically affected, or even switched in sign, by the substituent introduced to the sensitizer moiety, and polarity of solvent. Using mono-6-O-(3-methoxybenzoyl)-β-CD as chiral sensitizing host, (R)-trans-cyclooctene was obtained in up to 45.8% enantiomeric excess, which is the highest value ever reported for supramolecular photochirogenesis with analogous hosts. 5. The conformational variation of these modified CDs and their complexation behaviors with cis-cyclooctene were examined by circular dichroism spectroscopy in water-methanol mixed solvents, which reveal that the orientation of chromophore was highly sensitive to the type, position and length of the introduced substituents. In the end, the complex stability constants(Ks) were calculated, and the mechanisms of reaction were discussed. Maybe, electronic effects are more important than positions of substituents for mediating the enantiodifferentiating photoisomerization of cis-cyclooctene.

N-arylamides from selenium-catalyzed reactions of nitroaromatics and amides in the presence of carbon monoxide and mixed organic bases

N-Arylamides were exclusively obtained in moderate to good yields from selenium-catalyzed reactions of nitroaromatics with amides in the presence of CO and mixed organic bases Et3N and DBU.

The synthesis and properties of meso-tetra(4-alkylamidophenyl)porphyrin liquid crystals and their Zn complexes

A series of novel, long-chain-substituted, porphyrin derivatives, meso-tetra (4-alkylamidophenyl) porphyrin ligands and their Zn complexes (alkyl = 8,10,12,14,16,18) were prepared by acylation of the amino groups of 5,10,15,20-tetra(4-aminophenyl)porphyrin by alkyl chloride. Mesomorphism was investigated by DSC, polarized optical microscopy (POM) and X-ray diffraction (XRD). Only ligands containing chains > 12 carbon atoms displayed liquid crystalline behaviour, which exhibited a high phase transition temperature and a broad mesophase temperature span, Zn complexes showed no liquid crystalline behaviour. Cyclic voltammetry, luminescence spectra and surface photovoltage spectroscopy revealed that covalent linking of an alkylamido group to the tetraphenylporphyrin molecule influences, significantly, the properties of the porphyrin macrocycle.

Synthesis and characterization of hyperbranched aromatic poly(ether imide)s

The four AB(2) monomers, N-[3- or 4-bis(4-hydroxyphenyl)toluoyl]-4-chlorophthalimide and N-{3- or 4-[1,1-bis(4-hydroxyphenyl)]ethylphenyl}-4-chlorophthalimides, were prepared and used for synthesis of hyperbranched poly(ether imide)s bearing hydroxyl end groups. These hyperbranched poly(ether imide)s had moderate molecular weights with broad distributions and showed glass-transition temperatures (Tgs) between 177 and 230 degreesC. The thermogravimetric analytic measurement revealed the decomposition temperature at 5% weight-loss temperatures (T-d(5%)) ranging from 240 to 281 degreesC. Analysis using H-1 NMR spectroscopy revealed the four types of hyperbranched poly(ether imide)s to have similar degrees of branching (ca. 60%). These polymers were modified by acylation or nucleophilic substitution reaction at the hydroxyl end groups. The conversion effectiveness depended on the type of modification reaction, modifier, and reaction conditions. The thermal stability and solubility of hyperbranched poly(ether imide)s were improved by the modification of the end groups.

Electrospray ionization multiple-stage tandem mass spectrometric analysis of diglycosyldiacylglycerol glycolipids from the bacteria Bacillus pumilus

Electrospray ionization (ESI) combined with multiple-stage tandem mass spectrometry (MSn) was used to directly analyze the glycolipid mixture from bacteria Bacillus pumilus without preliminary separation. Full scan ESI-MS revealed the composition of picomole quantities of glycerolglycolipid species containing C-14-C-19 fatty acids, some of which were monounsaturated, Two main components were identified from their molecular masses and fragmentation pathways. The fragmentation pathway of the known compound compared with the investigated compound verified the proposed structure as 1(3)-acyl-2-pentadecanoyl-3(1)-O-[beta-D-glucopyranosyl-(1-->6)-O-beta-D-glucopyranosyl]-sn-glycerols. A comparison of the multiple tandem mass spectra of the different alkali-metal cation adducts indicates that the intensity of fragments and the dissociation pathways are dependent on the alkali-metal type, The basic structures of glycerolglycolipids were reflected clearly from the fragmentation patterns of the sodium cations, The intense fragments of the sugar residue from the precursor ions were obtained from the lithiated adduct ions. ESI-MSn spectra of [M + K](+) ions did not provide as much fragmentation as [M + Na](+) and [M + Li](+) adducts, but their spectra allow the position of glycerol acylation to be determined. On the basis of MS2 spectra of[M + K](+) ions, it was established that all components have a C-15:0 fatty acid at the sn-2 position of the glycerol backbone and C-14-C-19 acids at the sn-1 position of the glycerol backbone. Copyright (C) 1999 John Wiley & Sons, Ltd.

PTP1B抑制剂的制备与构效关系研究

蛋白酪氨酸磷酸酶1B（protein tyrosine phosphatase, PTP1B）是蛋白酪氨酸磷酸酶（protein tyrosine phosphatases, PTPs）家族中的一个经典的非受体型酪氨酸磷酸酶，在胰岛素信号通路中起着重要的负调控作用，是目前公认的一个新颖的糖尿病和肥胖症治疗靶点。寻找PTP1B的高活性抑制剂对糖尿病和肥胖症治疗有着重要的应用前景。 双-(2,3-二溴-4,5-二羟基苯基)-甲烷（BDDPM）是从松节藻醇提物中分离鉴定出的溴酚类化合物，体外活性筛选发现，它具有极强的蛋白酪氨酸磷酸酶1B(PTP1B)抑制活性(IC50=2.4μmol/L)。采用高脂饮食-链脲佐菌素诱导的大鼠模型（STZ-DM）对富含BDDPM的松节藻醇提物进行动物实验，发现中、高剂量组同样表现出惊人的活性，降糖效果优于阳性对照临床药物文迪雅，并呈剂量依赖性。于是拟采用STZ-DM大鼠模型对单一组分BDDPM进行药理、药效学等体内降糖活性研究，但体内动物实验需要30g以上BDDPM，所以首先要解决药源的问题。本文尝试从天然海藻提取分离和化学合成两种途径来解决BDDPM制备的问题。 首先本文尝试从松节藻中提取分离BDDPM的制备方法。通过正相硅胶色谱、凝胶Sephadex LH-20色谱和重结晶等纯化手段分离纯化目标化合物BDDPM，并借助IR，MS和NMR等技术确定了其化学结构。最终从常温风干的50kg松节藻干样品中分离得到7.8g BDDPM。由于松节藻藻体构成复杂，给分离纯化BDDPM带来极大困难，致使分离纯化过程耗费大量时间和金钱；并且原材料松节藻的采集也易受季节和原料短缺等自然因素的影响。所以，从天然海藻中分离纯化的方法不适宜用于BDDPM的制备。 本文的重点是对BDDPM（4e）的化学合成途径进行研究。本文通过5步合成法（Friedel-Craftz酰基化反应、苯环逐级溴代、羰基还原、羟基脱保护）成功地合成了BDDPM，合成总产率为23.6%。同时本文采用上述合成路线获得了四个系列共计20个溴酚系列衍生物（4e为目标产物BDDPM，其余19个为溴酚系列衍生物），其中10个为新化合物。合成的20个化合物经1H NMR、13C NMR、MSEI和IR进行了结构鉴定。合成的20个化合物在体外活性筛选中均表现出不同程度的PTP1B抑制活性，其中合成的目标产物4e具有与天然分离纯化获得的BDDPM同等效率的PTP1B抑制作用。 另外，通过比较四个系列化合物PTP1B抑制活性间的差异，对此类溴酚化合物的构效关系作了初步分析，结果表明：1．羰基官能团的存在会明显降低此类化合物的PTP1B抑制率；2．化合物中的羟基官能团被甲氧基保护后，PTP1B抑制活性会得到一定程度的加强；3．化合物苯环上溴原子取代基数目增多时，其PTP1B抑制率也会随之增强。但是，筛选结果中也有少部分化合物的PTP1B抑制作用与上述规则相违背。因此，本文总结的初步构效关系还需要进一步的实验研究加以验证。 最后本文通过化学合成的方法，经过5步反应成功地制备出了30g BDDPM，为后续的药理、药效学研究奠定了基础。

激光拼焊成套装备定位方法及焊接工艺研究

激光拼焊由于具有能量密度高，焊缝深宽比大，变形和热影响区小，焊接速度快，满足工件不同部位对材料各自性能的需求，焊接质量好，容易实现自动化等众多优点，使其广泛应用于工业中各个领域。激光拼焊生产线是利用高能激光作为焊接热源，将两块或多块汽车板材一次焊接成形，实现高效全自动化生产，年产可达百万片，以满足汽车行业的需求。而我国作为世界制造加工大国，目前尚不能完全独立自主开发激光拼焊成套装备。 针对自主开发激光拼焊成套装备的几个关键技术点，本文以中国科学院知识创新工程重要方向性项目“全自动激光拼焊成套装备关键技术研究与示范应用”为课题背景，结合项目实际开发中的具体要求，在对现有激光拼焊技术深入分析的基础上，对激光拼焊定位夹紧、最优化激光拼焊工艺和焊接接头机械性能、金相组织等方面进行了深入研究，得出了激光拼焊最优工艺规范和相应的焊接质量变化规律，为激光拼焊成套装备开发提供参考。 第一部分激光拼焊定位夹紧对中方法研究。重点分析了由于激光光束本身条件限制、激光拼焊生产线高速高效的要求、激光焊接热变形和目前国内汽车板材本身理化性能一致性差以及激光焊接过程中的诸多不确定因素，总结出了激光拼焊生产线工装夹具设计影响因素，并在此基础上指出了激光拼焊定位夹紧结构所应具备的功能特征。针对激光拼焊板材介于刚体和弹性体之间的柔性体特征，结合传统的定位原理“3-2-1”，提出了“N-2-1”的定位方式，给出了激光拼焊夹具定位原理及设计准则，初步建立了激光拼焊夹具参数化零件库和相应准则，并对激光拼焊夹紧机构进行了柔性分析，给出了拼焊夹具的柔性评价方案。 第二部分激光拼焊工艺研究。首先分析了激光拼焊工艺特征，重点研究了在大功率固态激光器条件下，激光拼焊焊接工艺参数主要包括激光功率、焊接速度、离焦量和侧吹保护气体的喷嘴高度、倾斜角度及气体流量等因素变化对焊接质量的影响，得出了变化规律曲线，为激光拼焊工艺规范微调方向提供参考依据;同时也为激光工艺库开发提供推理机制。最后系统全面地研究了目前汽车常用板材全厚度系列激光拼焊工艺，采用叠代寻优的方法获得到了适用于全自动激光拼焊生产线的最优化工艺规范。 第三部分激光拼焊工艺库开发。针对激光拼焊成套装备项目开发面临的问题：在中国市场中，激光拼焊成套装备销售必须附带汽车行业常用工艺规范库的现实问题。在大量试验的基础上，借助于VB6.0集成开发环境，建立了激光拼焊工艺库系统，主要包括激光拼焊示范应用模块、工艺参数查询模块、经济评估模块、数据库维护模块、管理查询模块等，初步实现了系统演示、查询、评估、管理等功能，基本满足激光拼焊生产线要求。 第四部分激光拼焊焊接接头金相组织性能研究。结合金属Fe3C相图，分析了在激光焊接快速冷却、大过冷度条件下，分别从合金性质、成分、固/液界面上的表面能、均相成核速度和固相生长速度等角度，探讨了金相组织结构变化特征。然后通过试验分别研究了汽车碳钢板和不锈钢板激光拼焊时，板材厚度、激光功率、焊接速度等工艺参数变化，对激光拼焊焊接接头的抗拉强度、显微组织硬度和金相组织结构影响。 第五部分针对激光拼焊钢板实际生产中，存在着焊接性能随焊接工艺变化差异大的问题，利用激光拼焊生产线实际得到的数据，建立了基于BP神经网络激光拼焊焊接性能预测模型，初步实现了根据工艺参数的改变，直接预测焊接力学性能的目的，克服了激光拼焊初期需大量试验性研究的缺点，为工艺参数优化研究提供了一种有效的手段。