WATER-SOLUBLE AND AMPHIPHILIC POLYMERS .11. GRAFT-POLYMERIZATION OF ACRYLIC-ACID ON POLY(VINYL ALCOHOL)

The graft polymerization of acrylic acid(AA) on poly(vinyl alcohol) (PVAL) has been investigated by using either potassium persulfate (KPS) or ceric ammonium nitrate(CAN) as an initiator. In the case of KPS initiation, the formation of the graft polymer always lags behind the homopolymer formation. The graft polymer is separated by acetone, and the increase of reaction temperature favors the homopolymer formation at the early stage. In the case of CAN initiation, graft polymers with a high PAA content can hardly be obtained when the polymerization is performed under nitrogen and at < 0.06 mol/L HNO3 concentration. It has been found that incorporation of a small amount of oxygen in a protective nitrogen gas accelerates markedly the graft polymerization, and that the resulting graft polymers can not be separated by acetone precipitation technique in most cases. The Dalian nitrogen(containing 0.7% oxygen) is a good protective gas for CAN-initiated PVAL-AA graft polymerization.

北黄海表层沉积物粒度分布特征及其对沉积环境的指示

本文基于北黄海1140个表层沉积物样品的粒度分析结果，来探讨沉积物粒度组成、分布特征与物源和水动力环境的关系。结果表明，研究区底质类型主要有泥、粉砂、砂质粉砂、粉砂质砂、砂五种类型，少数站位含有砾石。砾石则主要分布在长山列岛附近海域、大连湾口及其东南近海；砂主要分布在123.3°E以东的海域和长山列岛附近海域；粉砂主要分布在研究区的西南部和大连湾外海；粘土的含量较低，含量大于30%的区域仅分布在研究区的西南部，大于16%的区域有向北和东北延伸的趋势，在大连湾至广鹿岛近海沉积物粘土含量也大于16%。 根据对沉积物粒度各粒级的因子分析结果,结合沉积物的Folk分类和Pejrup分类,将北黄海划分成五个主要沉积环境分区，分别受山东半岛沿岸流、黄海暖流、强潮流场、长山列岛和辽东沿岸流控制。北黄海中西部沉积物主要受山东半岛沿岸流影响，经过本区的黄海暖流限制了山东半岛沿岸流携带的细粒物质向东和向北的扩散和运移，研究区东部沉积作用的主控因素是潮流，长山列岛中部海域受附近岛屿剥蚀物影响，大连湾外海受辽东半岛沿岸流控制。研究区西南部细粒沉积物的粒度分布具有不均匀性和南北不对称性，其形成主要受控于山东半岛沿岸流和黄海暖流及其相互作用，潮流可能也起一定作用。

Persistent organic pollutant residues in the sediments and mollusks from the Bohai Sea coastal areas, North China: An overview

The Bohai Sea costal area is one of the most developed zones of China and the sewage water from populous and developed cities, including Beijing, Tianjin. Qinhuangdao and Dalian is discharged into the Bohai Sea. Additionally, its semi-enclosed characteristic restricts water exchange, which leads to high accumulation of pollutants in the environment. This overview presents the residues of 6 classes of Persistent Organic Pollutants (POPs). including PAHs, DDTs. HCHs, PCBs and PCDD/Fs. in the sediments and mollusks of the Bohai Sea through analyzing previous literatures. In the sediments. the highest PAH concentrations were detected in the vicinities of Qinhuangdao, while the northeast corner of the Bohai Bay possessed the highest levels of DDTs and PCBs. The investigations on HCHs and PCDD/Fs distributions on the whole sea scale have not been reported. In mollusks, PAH concentrations were in the same order of magnitude in the whole Bohai Sea, so were DDTs. HCHs and PCBs, while the outlier maximum values of PCDDs and PCDFs occurred in Yingkou. In general, the POPs residues in mollusks collected from Shandong Province were higher than the other areas. The compositions of DDTs, HCHs and PCBs in sediments indicated their recent usage. By comparing POP concentrations in sediments with the recommended criterions, it was shown that some individual PAH compounds occasionally associated with adverse biological effects in the vicinities of the Liaodong Bay and Qinhuangdao, and the Liaohe River Estuary were heavily contaminated with DDTs, but PCBs were all below the thresholds. In order to reveal the transference and transformation of POPs in the environment, further studies concerning with their behavior, fate and bioaccumulation in the different trophic levels should be programmed. Moreover, laws and regulations should be enforced to ban the illegal usage of POPs-containing pesticides to guarantee health of the environment and human. (C) 2008 Elsevier Ltd. All rights reserved.

Experimental evaluation of heterobeltiosis and heterosis between two populations of Pacific abalone Haliotis discus hannai Ino

A2 x 2 factorial cross between two populations of Pacific abalone Haliotis discus hannai Ino, collected separately from Dalian (D) in China and Miyagi (M) in Japan, was conducted to compare performances in fertilization rate, hatching rate, metamorphosis rate and growth at days 20, 43, 160 and 330 between purebreds (DD and MM) and crossbreds (DM and MD) and investigate the magnitude of heterobeltiosis (better parent) and heterosis (mid-parent). Heterobeltiosis and heterosis for all the traits analyzed were evidently different between crossbreds DM and MD. Heterobeltiosis in the crossbred DM varied among traits, with values of 2.5% for the fertilization rate, 2.2% for the hatching rate, -1.9% for the metamorphosis rate and 7.4% for the growth at the (lay 330. The crossbred DM displayed positive heterotic values for fertilization rate (5.4%), hatching rate (7.4%), metamorphosis rate (7.6%) and growth (12.0%) at the day 330. However, both heterobeltiosis and heterosis for all the traits in the crossbred MD were negative except those for the growth at days 20 and 43. The results indicate the importance of selecting superior hybrid varieties if the exploitation of hybrid vigor is considered in the Pacific abalone breeding program.

城市交通中车队状态观测器的一种新算法

本文阐述了离散时间点过程理论,时变马尔科夫链及鞅差分序列在城市交通车队状态观测器中的应用。并在此基础上,改进了[5]中的估计算法。用本文提出的非线性最小方差估计算法,对提供的交通状态进行估计,所得结果比[5]中算法精度有明显提高。在大连市某交通干线计算机控制系统中初步应用,取得了令人满意的结果。

New progress in R&D of lower olefin synthesis

This paper gives a brief review of R&D researches for light olefin synthesis directly and indirectly from synthesis gas in the Dalian Institute of Chemical Physics (DICP). The first pilot plant test was on methanol to olefin (MTO) reaction and was finished in 1993, which was based on ZSM-5-type catalyst and fixed bed reaction. In the meantime, a new indirect method designated as SDTO (syngas via dimethylether to olefin) was proposed. In this process, metal-acid bifunctional catalyst was applied for synthesis gas to dimethylether(DME) reaction, and modified SAPO-34 catalyst that was synthesized by a new low-cost method with optimal crystal size was used to convert DME to light olefin on a fluidized bed reactor. The pilot plant test on SDTO was performed and finished in 1995. Evaluation of the pilot plant data showed that 190-200 g of DME were yielded by single-pass for each standard cubic meter of synthesis gas. For the second reaction, 1.880 tons of DME or 2.615 tons of methanol produced 1 ton of light olefins, which constitutes of 0.533 ton of ethylene, 0.349 ton of propylene and 0.118 ton of butene. DICP also paid some attention on direct conversion of synthesis gas to light olefins. A semi-pilot plant test (catalyst 1.8 1) was finished in 1995 with a CO conversion > 70% and a C(2)(=)-C(4)(=) olefin selectivity 71-74% in 1000 h. (C) 2000 Published by Elsevier Science B.V. All rights reserved.