黑体泵浦CO_2-CO,N_2O-CO,CO_2-H_2O和N_2O-H_2O激光的研究

本文对黑体辐射泵浦CO_2激光和N_2O激光由于CO和H_2O的加入所引起的激光功率变化进行了理论和实验研究.CO的加入可使的N_2O激光功率增加28%.

稳态CO激光的解析理论

为了分析CO激光的特性,通常需要对上百个方程进行数值计算,因而解析的分析就成为一个很值得探讨的方面。本文从分布函数方程和辐射强度谱分量传输方程出发,导出稳态CO激光在级联跃迁发射时的增益饱和特性,得到的强度谱分量与增益的关系式适用于均匀和非均匀加宽同时起作用的一般情况。文中所使用的振动分布函数由一个非线性积分方程求得。对两能级特例,本文结果与文献[9]一致。对均匀加宽极限的特例,本文给出的强度和强度谱分量的关系式与文献[4]的结果一致。

半焦在流化床燃烧中Cl元素影响CO氧化的试验

在非均匀布风的流化床燃烧系统中进行了半焦中添加PVC/NaCl的混烧试验,研究了Cl元素对燃烧中CO氧化的影响以及混烧时SO_x等污染物的生成规律.试验结果表明,半焦与PVC/NaCl混烧在技术上可行,添加Cl元素抑制CO氧化,加入PVC增加SO_2排放,而加入NaCl则减少SO_2排放.

卤素对于燃烧中CO氧化和NO生成的影响

卤族元素在燃烧时会影响CO的氧化和NO的生成。本文通过化学平衡方法分析了H2O和HCl对于CO氧化的协同效应,在非均匀布风流化床中进行了PVC塑料与煤或半焦的混烧试验,测量了CO和CH4的排放特性,从而从理论上和实验上证明了HCl对CO氧化的抑制作用。并给出了今后研究的方向和问题。

碳氢燃料超音速燃烧的数值研究

本文对CH_4横向喷入超音速高温空气主流的二维流场进行了数值模拟，对CH_4-O_2的六方程反应模式进行了检验，借以对混合与燃烧过程的现象与机理加以研究，并与单方程反应模型及H_2横向喷射的情况进行了对比。得到了较为理想的结果。本文采用二维雷诺平均全N-S方程进行计算，采用热完全气体模型，用Baldwin-Lomax代数涡粘性湍流模型来模拟湍流效应。假定N_2不参加反应，CH_4-O_2反应机制选取六个基本反应，以及九个组元O、O_2、CH_3、CH_4、OH、CHO、CH_2O、CO和CO_2，应用空间二阶精度Harten-Yee隐式TVD格式，采用化学源项点隐的全隐方法数值求解。本文对多种超音速空气主流及边界条件的工部进行了数值模拟，并对其流场进行了分析。针对工作中出现的问题，提出了对下一步工作的展望。

A Trabecular Bone Explant Model of Osteocyte–Osteoblast Co-Culture for Bone Mechanobiology

The osteocyte network is recognized as the major mechanical sensor in the bone remodeling process, and osteocyte-osteoblast communication acts as an important mediator in the coordination of bone formation and turnover. In this study, we developed a novel 3D trabecular bone explant co-culture model that allows live osteocytes situated in their native extracellular matrix environment to be interconnected with seeded osteoblasts on the bone surface. Using a low-level medium perfusion system, the viability of in situ osteocytes in bone explants was maintained for up to 4 weeks, and functional gap junction intercellular communication (GJIC) was successfully established between osteocytes and seeded primary osteoblasts. Using this novel co-culture model, the effects of dynamic deformational loading, GJIC, and prostaglandin E-2 (PGE(2)) release on functional bone adaptation were further investigated. The results showed that dynamical deformational loading can significantly increase the PGE(2) release by bone cells, bone formation, and the apparent elastic modulus of bone explants. However, the inhibition of gap junctions or the PGE(2) pathway dramatically attenuated the effects of mechanical loading. This 3D trabecular bone explant co-culture model has great potential to fill in the critical gap in knowledge regarding the role of osteocytes as a mechano-sensor and how osteocytes transmit signals to regulate osteoblasts function and skeletal integrity as reflected in its mechanical properties.

Numerical and Experimental Investigation On The Prevention of Co Deflagration

The exhaust gases from industrial furnaces contain a huge amount of heat and chemical enthalpy. However, it is hard to recover this energy since exhaust gases invariably contain combustible components such as carbon monoxide (CC). If the CO is unexpectedly ignited during the heat recovery process, deflagration or even detonation could occur, with serious consequences such as complete destruction of the equipment. In order to safely utilize the heat energy contained in exhaust gas, danger of its explosion must be fully avoided. The mechanism of gas deflagration and its prevention must therefore be studied. In this paper, we describe a numerical and experimental investigation of the deflagration process in a semi-opened tube. The results show that, upon ignition, a low-pressure wave initially spreads within the tube and then deflagration begins. For the purpose of preventing deflagration, an appropriate amount of nitrogen was injected into the tube at a fixed position. Both simulation and experimental results have shown that the injection of inert gas can successfully interrupt the deflagration process. The peak value of the deflagration pressure can thereby be reduced by around 50%. (C) 2008 Elsevier Ltd. All rights reserved.

Influence of HCl on CO and NO emissions in combustion

The influence of HCl on CO and NO emissions was experimentally investigated in an entrained flow reactor (EFR) and an internally circulating fluidized bed (ICFB). The results in EFR show the addition of HCl inhibits CO oxidation and NO formation at 1073 K and 1123 K. At the lower temperature (1073 K) the inhibition of HCl becomes more obvious. In ICFB, chlorine-containing plastic (PVC) was added to increase the concentration of HCl during the combustion of coal or coke. Results show that HCl is likely to enhance the reduction of NO and N2O. HCl greatly increases CO and CH4 emission in the flue gas. A detailed mechanism of CO/NO/HCl/SO2 system was used to model the effect of HCl in combustion. The results indicate that HCl not only promotes the recombination of radicals O, H, and OH, but also accelerates the chemical equilibration of radicals. The influence of HCl on the radicals mainly occurs at 800-1200 K. (C) 2009 Elsevier Ltd. All rights reserved.

Strong visible up-conversion emission in Tb3+, Tm3+ and Tb3+-Tm3+ co-doped tellurite glasses sensitized by Yb3+

Up-conversion luminescence characteristics under 975 nm excitation have been investigated with Tb3+/Tm3+/Yb3+ triply doped tellurite glasses. Here, green (547 nm: D-5(4) --> F-7(4)) and red (660 nm: D-5(4) --> F-7(2)) up-conversion (UC) luminescence originating from Tb3+ is observed strongly, because of the quadratic dependences of emission intensities on the excitation power. Especially, the UC luminescence was intensified violently with the energy transfer from the Tm3+ ions involves in the Tb3+ excitation. To the Tb3+/Tm3+/Yb3+ triply doped glass system, a novel up-conversion mechanism is proposed as follows: the energy of (3)G(4) level (Tm3+) was transferred to D-5(4) (Tb3+) and the 477-nm UC luminescence of Tm3+ was nearly quenched. (C) 2006 Elsevier B.V. All rights reserved.