Correlated structural and optical investigation of terbium-doped zinc oxide nanocrystals

Tb3+-doped zinc oxide nanocrystals with a hexagonal wurzite structure were successfully prepared by reaction between Zn-O-Tb precursors and LiOH in ethanol. Good incorporation of Tb3+ in ZnO nanocrystals is proved by XRD, FTIR, PL and PLE measurements. The presence of acetate complexes to zinc atoms on particle surfaces is disclosed by FTIR results. Emission from both Tb3+ ions and surface states in ZnO matrix, as well as their correlation were observed. The luminescence mechanism is discussed. (C) 2000 Elsevier Science B.V. All rights reserved.

酚酞型聚芳醚砜共聚物与共混物－(PP/BiS-T) PES共聚物和(PPS/PES-C)、(PPO/PES-C)共混物的合成、结构与性能研究

本工作旨在通过共聚、共混技术制备酚酞型聚芳醚砜共聚物(PP/BiS-T) PES和共混物(PPS/PES-C)、PPO/PES-C，以便改善酚酞型聚芳醚砜（PES－C）的加工性能（特别是注射加工性能）和耐溶剂性能。通过研究共聚物和共混物的微观结构，聚集态结构与性能的关系，探索改善酚酞型聚芳醚硕性能的有效途径第一部分：(PP/BiS-T) PES共聚物的合成、结构与性能(PP/BiS-T) PES共聚物是以4，4'二氯二苯砜（DCDPS）、酚酞（PP）和4，4'－二羟基二苯硫醚(BiS-T)为单体，采用固体无水K_2CO_3/NMP/TMSO_2 混合溶剂反应体系合成的。共聚反应规律研究表明：在NMP/TMSO_2混合溶剂中，共聚反应可以顺利进行，避免了交联反应的发生，并成功地合成了高分子量的(PP/BiS-T) PES共聚物。DSC分析结果表明(PP/BiS-T) PES系列属于无定形的均相共聚物体系，每一组成比例对应的共聚物只具有一个玻璃化转变温度。且随组成比例的改变呈线性变化，TBA分析结果与DSC基本一致，并证实了(PP/BiS-T) PES属于均相共聚物体系，而不是均聚物的共混物。TG分析表明：共聚物具有良好的耐热氧化稳定性BiS-T链节在分子链中起到了提高自身抗氧性的作用。1R光谱对共聚物的结构进行表征。~(13)C-NMR分析确认共聚物多属于无规共聚物。动态力学试验表明共聚物(PP/BiS-T) PES以及PES－C，在－100 ℃附近和0－100 ℃，存在着次级松驰与转变，并发现水分子的存在对这种转变（次级松驰）有一定的影响。共聚物的熔融流动性试验和溶解性试验表明共聚物(PP/BiS-T) PES具有稍好于PES－C的熔融流动性；溶解性与PES－C类似。力学试验说明共聚物属于强而硬类型的聚合物。第二部分：PPS/PES－C共混物的制备、聚集态结构与性能PPS/PES－C共混物是以联苯/二苯硕混合物为溶剂，采用溶液沉析方法制备的，DSC、WAXD，SEM和1R分析手段对共混物的聚集态结构和微观结构进行了表征。DSC分析认为共混物属于多相体系，PPS的结晶性随着PES－C含量增加而降低。DSC和SEM观察结果表明：相转变发生在PPS占40％左右。PPS占25％时，DSC曲线呈现出界面相玻璃化转变温度。共混物具有良好的耐热氧化稳定性和耐热分解稳定性。微晶大小计算结果：PES－C存在导致了PPS微晶大小降低。WAXD曲线表明PPS占50％，共混物中的PPS具有较好的结晶性。SEM观察发现：随着PES－C含量增加，PES－C由分散相（PES－C50％）变为连续相（PES－C70％）。PPS占50％或低于50％时，共混物体系不仅发生了微观相分离，而且发生了宏观相分离。M.I.指数表明共混物中PPS为连续相时，共混物具有良好的熔融流动性。溶解性试验结果：共混物具有较好的耐溶剂性。第三部分：PPO/PES－C共混物的合成、结构与性能 PPO/PES－C共混物系用溶液－涂膜法，以氯彷为溶剂制备的。讨论了由同一共混物溶液浓度下制备的共混物的互溶性随组成的改变而变化。DSC分析结果：PPO/PES－C属于部分相溶性体系。利用Fox方程推导式计算结果表明PPO在富PES－C相中具有良好的分散性；而PES－C在富PPO相中的分散性较差。共混物(PPO/PES－C)试样经丙酮浸泡后，PPO（>50％）发生了溶剂诱导结晶现象，同时丙酮促使共混物发生完全相分离。结晶溶化热显示共混物中少量的PES－C存在有利于PPO的溶剂诱导结晶。TG分析表明共混物具有良好的耐热分解稳定性和耐热氧化分解稳定性。偏光显微镜下观察到PPO球晶的存在。SEM和FT－1R分别对共混物的形态结构和微观结构进行了表征。WAXD试验证实了丙酮处理的(PPO/PES－C)（70/30），（90/10）共混物中PPO的结晶性。溶解性试验表明：PPO掺入有助于 PES－C的耐溶剂性提高。

Bis(2,2 '-bipyridine)(5,6-epoxy-5,6-dihydro-[1,10] phenanthroline)ruthenium: Synthesis and electrochemical and electrochemiluminescence characterization

In this work, an electrochemiluminescence (ECL) reagent bis(2,2'-bipyridine)(5,6-epoxy-5,6-dihydro-[1,10]phenanthroline)ruthenium complex (Ru-1) was synthesized, and its electrochemical and ECL properties were characterized. The synthesis of Ru-1 was confirmed by IR spectra, element analysis, and H-1 NMR spectra. For further study, its UV-vis absorption and fluorescence emission spectra were investigated. Ru-1 also exhibited quasi-reversible Ru-II/Ru-III redox waves in acetonitrile solution. The aqueous ECL behaviors of Ru-1 were also studied in the absence and in the presence of tripropylamine.

Synthesis and properties of sulfonated poly[bis(benzimidazobenzisoquinolinones)] as hydrolytically and thermooxidatively stable proton conducting ionomers

Novel sulfonated poly [bis(benzimidazobenzisoquinolinones)] as hydrolytically and thermooxidatively stable electrolyte for high -temperature fuel cell applications are reported. A series of sulfonated polymers (SPBIBI-x, x refers to molar percentage of sulfonated dianhydride monomer) were synthesized from 6,6'-disulfonic-4,4'-binaphthyl-1,1',8,8'-tetracarboxylic dianhydride (SBTDA), 4,4-binaphthyl-1,1,8,8-tetracarboxylic dianhydride (BTDA), and 3,3'-diaminobenzidine. The chemical structures of those polymers as well as model compounds synthesized from SBTDA and o-phenylenediamine were confirmed by nuclear magnetic resonance (NMR) and Fourier transform infrared (FTIR).

Synthesis of isomeric bis(amine anhydride)s for novel poly(amine imide)s by Pd-catalyzed amination of 4-chlorophthalic anhydride

Two novel bis(amine anhydride) monomers, N,N'-bis(3,4-dicarboxyphenyl)-1,4-phenylenediamine dianhydride I and N,/N'-bis(3,4-dicarboxyphenyl)-1,3-phenylenediamine dianhydride 11, were prepared via palladium-catalyzed amination reaction of 4-chloro-N-methylphthaliniide with 1,4-phenylenediamine or 1,3-phenylenediamine, followed by alkaline hydrolysis of the intermediate bis(amine imide)s and subsequent dehydration of the resulting tetraacids. A series of new poly(amine imide)s were prepared from the synthesized dianhydride monomers with various diamines in NMP via conventional two-step method.

Alternating Copolymerization of Cyclohexene Oxide and Carbon Dioxide Catalyzed by Noncyclopentadienyl Rare-Earth Metal Bis(alkyl) Complexes

The syntheses of several dialkyl complexes based on rare-earth metal were described. Three beta-diimine compounds with varying N-aryl substituents (HL1 = (2-CH3O(C6H4))N=C(CH3)CH=C(CH3)NH(2-CH3O(C6H4)), HL2 = (2,4,6-(CH3)(3) (C6H2))N=C(CH3)CH=C(CH3)NH(2,4,6-(CH3)(3)(C6H2)), HL3 = PhN=C(CH3)CH(CH3) NHPh) were treated with Ln(CH2SiMe3)(3)(THF)(2) to give dialkyl complexes L(1)Ln (CH2SiMe3)(2) (Ln = Y (1a), Lu (1b), Sc (1c)), L(2)Ln(CH2SiMe3)(2)(THF) (Ln = Y (2a), Lu (2b)), and (LLu)-Lu-3(CH2SiMe3)(2)(THF) (3). All these complexes were applied to the copolymerization of cyclohexene oxide (CHO) and carbon dioxide as single-component catalysts.

Thiophene-NPN Ligand Supported Rare-Earth Metal Bis(alkyl) Complexes. Synthesis and Catalysis toward Highly trans-1,4 Selective Polymerization of Butadiene

A series of new rare-earth metal bis(alkyl) complexes [L(1-3)Ln(CH2SiMe3)(2)(THF)(n)] (L-1 = MeC4H2SCH2NC6H4(Ph)(2)P=NC6H2Me3-2,4,6: Ln = Sc, n = 1 (1a); Ln = Lu, n = 1 (1b); L-2 = MeC4H2SCH2NC6H4(Ph)(2)P=NC6H3Et2-2,6: Ln = Sc, n = 1 (2a); Ln = Lu, n = 1 (2b); Ln = Y, n = 1 (2c); L-3 = MeC4H2SCH2NC6H4(Ph)(2)P=(NC6H3Pr2)-Pr-i-2,6: Ln = Sc, n = 0 (3a)) and (LSc)-Sc-4(CH2SiMe3)(2()THF) (4a) (L-4 = C6H5CH2NC6H4(Ph)(2)P=NC6H3Et2-2,6) have been prepared by reaction of rare-earth metal tris(alkyl)s with the corresponding HL1-4 ligands via alkane elimination.

Tridentate CCC-Pincer Bis(carbene)-Ligated Rare-Earth Metal Dibromides. Synthesis and Characterization

The first xylene-bridged bis(N-heterocyclic carbene) (bis(NHC))-ligated CCC-pincer rare-earth metal dibromides (PBNHC)LnBr(2)(THF) (PBNHC = 2,6-(2,4,6-Me3C6H2NCHCHNCCH2)(2)C6H3; 1: Ln = Sc; 2: Ln = Lu; 3: Lu = Sm) were prepared by in situ treatment of a THF suspension of 2,6-bis(1-mesitylimidazolium methyl)-1-bromobenzene dibromides ((PB-NHC-Br) center dot 2HBr) and lanthanide trichlorides (LnCl(3)) with dropwise addition of nBuLi at room temperature.