Study on Microstructure and Nanomechanics Properties of Antibacterial Bone China

Fracture appearance, surface and nanomechanics properties of antibacterial ceramics contairing rare earth phosphate composite antibacterial materials were characterized and measured by SEM, AFM and Nanoindenter, respectively. Results show that grain of fracture surface of antibacterial ceramics grows uniform refinement topography of bubble break-up appears at the surface, which is flat and has liquid character, by adding the phosphate composite containing rare earth, nevertheless needle-like crystal and granular outgrowth form at fracture surface and surface of common ceramics, respectively. Young's modulus of antibacterial ceramic film is 74. 397 GPa and hardness is 8. 134 GPa, which increses by 4.4﹪ and 1.6﹪ comparing with common ceramics, respectively. Loading curves of two kind of ceramics have obvious nonlinear character under 700 nm and linear character between 700 ～ 1000 nm, and unloading curve have obvious linear character.

1989年3月和8月太阳大事件的日地系统整体行为研究

<正> 1989年3月日面出现了近四十年来最大的黑子群,发生了剧烈的太阳活动,产生了重大的地球物理效应。对这些事件的联测取得了大量日地物理的资料。为了推动进一步的分析和研究,中国科学院第22周太阳活动峰年日地系统整体行为研究专家组于1990年4月23日至26日在北京召开了“1989年3月和8月重大日地事件观测与分析研

激光毛化技术对18-8不锈钢疲劳性能影响的研究

通过模拟分析 ,对激光毛化 18 8不锈钢的疲劳寿命与毛化覆盖率的关系进行研究 ,预测结果与相关实验结果进行对比。结果显示 ,由于激光毛化处理的影响 ,18 8不锈钢的疲劳寿命得到改善 ,而且在毛化覆盖率为 2 0 %左右时 ,材料疲劳性能最好

评价机械加工表面形貌的小波变换方法

提出了用小波变换计算粗糙表面分形维数的新方法，并基于Weierstrass-Mandelbrot函数(W-M函数Majumdar-Bhushan函数(M-B函数)对该方法进行了验证，结果表明该方法具有很高的 计算精度。应用小波变换方法对核态池沸腾试验板表面形貌的分形特征进行了评价，包括铜和不锈钢材料，轧制、砂纸打磨和表面机械抛光等3种加工方法生成5个粗糙度级别的试验板，研究结果表明该方法能有效评价表面形貌的分形特征。

脉冲激光辐照ZrO_2涂层的18-8不锈钢快凝组织与精细结构

利用脉冲辐照研究超高温度梯度下表层预轩ZrO_2纳米颗粒涂层的18-8奥氏体不锈钢的快凝组织形态、微结构特征及力学性质，结果表明，在表层约15μm范围内形成Zr的合金化微区，Zr最大含量(原子分数)为43.3%，但Zr成分分布存在不连续特征；预置纳米ZrO_2陶瓷涂层明显提高了激光作用深度。超高温梯度和高冷却速度显著细化了快凝亚组织并得到超细枝晶及胞晶，并观察到位错胞及栅栏孪晶两类亚晶，而激光熔区的外延生长机制未使晶粒细化。激光辐照后，合金化区硬度增加而弹性模量降低，其余部分硬度增加而弹性模量无变化。

滦县M_L=4.8地震的局部多台数字记录

据中国数字地震台网测定,2004年1月20日16时34分11.9秒在滦县发生了ML=4.8的地震,震中位于东经118.77°,北纬39.71°,震源深度H=10km。尽管地震造成的破坏轻微,但有感范围较大,在秦皇岛市、青龙县、北京市、廊坊市、天津市等地均有震感。这次地震使震中及其附近地区的5台数字强震仪触发,记录了5组3分量数字加速度记录。本文对这次地震事件、地震地质概况作了简要介绍,并就台站(阵)基本背景资料、数字强震仪主要技术指标作了详细说明。最后,对获取的15条数字加速度记录作了初步处理分析,如基线校正、加速度峰值计算、傅里叶谱及反应谱计算等。

Effects of Thermocapillary Convection on the Growth Process in Industrial 8-inch Silicon Czochralski Growth

Czochralski (CZ) crystal growth process is a widely used technique in manufacturing of silicon crystals and other semiconductor materials. The ultimate goal of the IC industry is to have the highest quality substrates, which are free of point defect, impurities and micro defect clusters. The scale up of silicon wafer size from 200 mm to 300 mm requires large crucible size and more heat power. Transport phenomena in crystal growth processes are quite complex due to melt and gas flows that may be oscillatory and/or turbulent, coupled convection and radiation, impurities and dopant distributions, unsteady kinetics of the growth process, melt crystal interface dynamics, free surface and meniscus, stoichiometry in the case of compound materials. A global model has been developed to simulate the temperature distribution and melt flow in an 8-inch system. The present program features the fluid convection, magnetohydrodynamics, and radiation models. A multi-zone method is used to divide the Cz system into different zones, e.g., the melt, the crystal and the hot zone. For calculation of temperature distribution, the whole system inside the stainless chamber is considered. For the convective flow, only the melt is considered. The widely used zonal method divides the surface of the radiation enclosure into a number of zones, which has a uniform distribution of temperature, radiative properties and composition. The integro-differential equations for the radiative heat transfer are solved using the matrix inversion technique. The zonal method for radiative heat transfer is used in the growth chamber, which is confined by crystal surface, melt surface, heat shield, and pull chamber. Free surface and crystal/melt interface are tracked using adaptive grid generation. The competition between the thermocapillary convection induced by non-uniform temperature distributions on the free surface and the forced convection by the rotation of the crystal determines the interface shape, dopant distribution, and striation pattern. The temperature gradients on the free surface are influenced by the effects of the thermocapillary force on the free surface and the rotation of the crystal and the crucible.

燃烧物理学基础

汶川8级地震前加卸载响应比的大尺度异常

孕震初期加卸载响应比(LURR)通常在1左右涨落,然后逐渐上升至峰值点。但强地震并不在峰值点上发生,而要滞后一段时间(T2)。T2与震级有关,震级越大,T2越长。对于8级地震,T2的计算值为28±8个月,汶川8级地震实际的T2是23个月。对于大地震,T2很长,峰值点后LURR通常迅速下降,在大地震前夕LURR常常降得很低,而预测的地震又迟迟没有发生,这种情况下很容易误导人们怀疑,甚至放弃原来的预测,殊不知,这时大地震正在迫近。这正是汶川8级地震给予人们血的教训。大地震不仅孕育时间长,孕震区面积也很大。大地震的前兆在时空上都是大尺度。基于这种认识,根据LURR的演化,中国大陆西南地区可能正在孕育一个特大地震。

IL-8-induced L-selectin shedding regulates its binding kinetics to PSGL-1

L-selectin plays a crucial role in inflammation cascade by initiating the tethering and rolling of leukocytes on endothelium wall. While many L-selectin molecules are rapidly shed from the cell surface upon activation, the remaining membrane-anchored L-selectin may still play an important role in regulating leukocyte rolling and adhesion with different binding kinetics. Here we developed an in vitro model to activate Jurkat cells via interlukin-8 (IL-8) and quantified the two-dimensional (2D) binding kinetics, using a micropipette aspiration assay, of membrane-anchored L-selectin to P-selectin glycoprotein ligand 1 (PSGL-1) ligand coupled onto human red blood cells (RBCs). The data indicated that L-selectin shedding reduced the amount of membrane-anchored L-selectin and lowered both its reverse and forward rates. These results suggested that the rolling dynamics of activated leukocytes was determined by two opposite impacts: reducing the surface presentation would enhance the rolling but lowering the kinetic rates would decrease the rolling. This finding provides a new insight into understanding how L-selectin shedding regulates leukocyte rolling and adhesion.

IL-8刺激L-选择素水解断裂对细胞膜拓扑结构和刚度的影响

目的 研究IL-8刺激所致的L-选择素水解断裂是否会引起细胞膜结构和刚度的变化,进而影响L广选择素-配体的反应动力学.方法 分别用IL-8、TAPI-0+IL-8和TAPI-0处理本构表达L-选择素的Jurkat细胞,用以构建L-选择素水解断裂、阻断水解断裂和阻断剂对照的细胞-分子模型.采用扫描电镜观察其表面拓扑结构,采用微管吸吮方法测量其刚度.结果 与正常组相比,水解断裂组和阻断水解断裂组细胞微绒毛减少、表面趋于光滑,而阻断剂对照组则无明显变化;无论是水解断裂组,阻断水解断裂组还是阻断剂对照组,细胞膜刚度与正常组相比均无显著性差异.结论 IL-8刺激所致L-选择素水解断裂会引发细胞膜拓扑结构的变化,进而影响L一选择素一配体反应动力学的变化;而细胞膜刚度未见明显变化,表明载体刚度不是水解断裂引发L-选择素-配体反应动力学变化的因索.

Laser action from 1,3,5,7-tetramethyl-2,6-diethyl-8-n-propyl pyrromethene-BF2

We measured spectroscopic and laser action properties of a novel 8-position substituted pyrromethene-BF2, namely 1,3,5,7-tetramethyl-2,6-diethyl-8-n-propyl pyrromethene-BF2 complex. The laser action was performed with the corresponding dye solution in ethanol, which was placed in a Littman-type laser cavity pumped by the second harmonic of a Q-switched Nd:YAG laser. The spectroscopic measurements clearly indicated that the corresponding dye solution in ethanol exhibited intense absorption in the visible spectral region with large fluorescence quantum yield. It possesses rather low triplet-triplet absorption in the spectral region 460-550 nm and almost negligible triplet-triplet absorption in the lasing spectral region. As a consequence, it lases nearly as efficiently as commercially available benchmark laser dyes such as Rhodamine-6G and outperformed them in wavelength tunability in our laser cavity and pump geometry. (C) 2002 Optical Society of America.

Energy transfer between silicon-oxygen-related defects and Yb3+ in transparent glass ceramics containing Ba2TiSi2O 8 nanocrystals

We report on the conversion of near-ultraviolet radiation of 250-350 nm into near-infrared emission of 970-1100 nm in Yb3+-doped transparent glass ceramics containing Ba2TiSi2O8 nanocrystals due to the energy transfer from the silicon-oxygen-related defects to Yb3+ ions. Efficient Yb3+ emission (F-2(5/2)-> F-2(7/2)) was detected under the excitation of defects absorption at 314 nm. The occurrence of energy transfer is proven by both steady state and time-resolved emission spectra, respectively, at 15 K. The Yb2O3 concentration dependent energy transfer efficiency has also been evaluated, and the maximum value is 65% for 8 mol % Yb2O3 doped glass ceramic. These materials are promising for the enhancement of photovoltaic conversion efficiency of silicon solar cells via spectra modification.

High-efficiency diffraction gratings in fused silica at the wavelength of 632.8 nm

We describe high-efficiency diffraction gratings fabricated in fused silica at the wavelength of 632.8 nm by rigorous coupled-wave analysis (RCWA). High-density holographic gratings, if the groove density falls within the range of 1575-1630 lines/mm and the groove depth within the range of 1.1-1.3 microns, can realize high diffraction efficiencies at the wavelength of 632.8 nm, e.g., the first Bragg diffraction efficiency can theoretically achieve more than 93% both in TE- and TM-polarized incidences, which greatly reduces the polarization-dependent losses. Note that with different groove profiles further optimized, the maximum efficiency of more than 99.69% can be achieved for TM-polarized incidence, or 97.81% for TE-polarized incidence.

热退偏损耗完全补偿的千赫兹电光调QNd:YAG激光器

为了同时补偿固体增益介质的热致双折射及热透镜效应,进一步提高重复频率1 kHz激光二极管(LD)侧向抽运高平均功率电光调Q Nd:YAG激光器的输出功率,设计了一种完全消除热退偏损耗的双调Q开关谐振腔结构,此结构在传统调Q谐振腔的基础上沿着偏振片的退偏方向增加了一个调Q谐振支路,并使得激光从增益介质方向输出。实验结果表明,此激光器的单脉冲能量比单Q开关结构的非补偿腔输出能量高出74.7%。当侧面抽运的激光二极管输出脉冲能量达到307 mJ时,激光输出能量达到26.2 mJ,光-光转换效率为8.5%,光束发