285 resultados para 2-9
Resumo:
1、喜树碱类衍生物抗HIV构效关系与作用机制研究 喜树碱为传统的抗肿瘤药物。本研究对经过化学结构修饰的喜树碱类衍生物进行抗HIV活性及作用机制的研究,并初步探讨了其抗HIV构效关系。 我们对喜树碱类衍生物A系列化合物A1(喜树碱)、A2(10-羟基喜树碱)及A3(7-羟基喜树碱)进行了抗HIV活性检测。化合物A1和A3有较好的抗HIV-1和抗HIV-2活性,化合物A2没有显示抗HIV活性。表明化合物A1的C-10位上-OH基团修饰可能会降低抗HIV活性,化合物A1的C-7位上-CH2OH基团修饰和C-20位-CH3缺失可能会提高其抗HIV活性。对化合物A3和A1的抗HIV机制研究发现:二者对整合酶有一定的结合活性,对慢性感染H9/HIV-1ⅢB 和Jurkat/HIV-1ⅢB细胞中病毒复制没有抑制活性、不能阻断H9/HIV-1ⅢB与正常细胞间的融合,对重组的HIV-1蛋白酶和逆转录酶没有抑制活性。化合物A1和A3不具有选择性杀伤HIV-1ⅢB慢性感染的H9和Jurkat细胞系的作用。进一步进行化合物A3诱导 H9和H9/HIV-1ⅢB、Jurkat和Jurkat/HIV-1ⅢB的凋亡实验显示,化合物A3诱导感染HIV-1ⅢB和未感染病毒细胞的凋亡没有选择性。据此我们初步认为化合物A3和A1的抗HIV作用可能与抑制整合酶活性有关,该化合物可能还作用于其它靶点。 喜树碱类衍生物B系列中化合物B1为20(S)-O - [-O-( 1'-氧基-2',2',6',6'-四甲基哌啶-4'-丁二酸)]-20-喜树碱酯,化合物B2为20(S)-O - [-N-( 1'-氧基-2',2',6',6'-四甲基-1',2',5',6'-四氢吡啶酰胺)-4'-丙氨酸)]-20-喜树碱酯)。我们对化合物B1和B2进行了抗HIV活性检测。结果显示:化合物B2有较好的抗HIV-1和抗HIV-21、喜树碱类衍生物抗HIV构效关系与作用机制研究 喜树碱为传统的抗肿瘤药物。本研究对经过化学结构修饰的喜树碱类衍生物进行抗HIV活性及作用机制的研究,并初步探讨了其抗HIV构效关系。 我们对喜树碱类衍生物A系列化合物A1(喜树碱)、A2(10-羟基喜树碱)及A3(7-羟基喜树碱)进行了抗HIV活性检测。化合物A1和A3有较好的抗HIV-1和抗HIV-2活性,化合物A2没有显示抗HIV活性。表明化合物A1的C-10位上-OH基团修饰可能会降低抗HIV活性,化合物A1的C-7位上-CH2OH基团修饰和C-20位-CH3缺失可能会提高其抗HIV活性。对化合物A3和A1的抗HIV机制研究发现:二者对整合酶有一定的结合活性,对慢性感染H9/HIV-1ⅢB 和Jurkat/HIV-1ⅢB细胞中病毒复制没有抑制活性、不能阻断H9/HIV-1ⅢB与正常细胞间的融合,对重组的HIV-1蛋白酶和逆转录酶没有抑制活性。化合物A1和A3不具有选择性杀伤HIV-1ⅢB慢性感染的H9和Jurkat细胞系的作用。进一步进行化合物A3诱导 H9和H9/HIV-1ⅢB、Jurkat和Jurkat/HIV-1ⅢB的凋亡实验显示,化合物A3诱导感染HIV-1ⅢB和未感染病毒细胞的凋亡没有选择性。据此我们初步认为化合物A3和A1的抗HIV作用可能与抑制整合酶活性有关,该化合物可能还作用于其它靶点。 喜树碱类衍生物B系列中化合物B1为20(S)-O - [-O-( 1'-氧基-2',2',6',6'-四甲基哌啶-4'-丁二酸)]-20-喜树碱酯,化合物B2为20(S)-O - [-N-( 1'-氧基-2',2',6',6'-四甲基-1',2',5',6'-四氢吡啶酰胺)-4'-丙氨酸)]-20-喜树碱酯)。我们对化合物B1和B2进行了抗HIV活性检测。结果显示:化合物B2有较好的抗HIV-1和抗HIV-2活性,而化合物B1的抗HIV活性差。表明化合物B1的C-4’位-CH2被-NH取代,同时C-3’位-CH3修饰可能会提高其抗HIV活性。对化合物B2的抗HIV机制研究发现,化合物B2对慢性感染H9/HIV-1ⅢB细胞中病毒复制没有抑制活性、不能阻断H9/HIV-1ⅢB与正常细胞间的融合,对HIV-1蛋白酶、重组的HIV-1逆转录酶及整合酶没有抑制活性。化合物B2不具有选择性杀伤HIV-1ⅢB慢性感染的H9细胞系的作用。化合物B2抗HIV的作用机制还需进一步研究。 2、HIV/AIDS患者疱疹病毒感染状况及性病患者的HIV感染状况分析 疱疹病毒是AIDS患者合并感染的常见病原体。引起人类疾病的8种疱疹病毒与HIV感染及AIDS进展、机会性感染、恶性肿瘤密切相关。为了解HIV/AIDS患者人类8型疱疹病毒感染状况,我们检测了30例AIDS患者、40例HIV携带者及70例正常对照的液标本中8型疱疹病毒感染状况。采用ELISA法检测单纯疱疹病毒1型(HSV-1)、单纯疱疹病毒2型(HSV-2)、水痘-带状疱疹病毒(VZV)和巨细胞病毒(CMV);采用PCR法检测EB病毒(EBV)、疱疹病毒6型(HHV-6)、疱疹病毒7型(HHV-7)及疱疹病毒8型(HHV-8)。结果显示,HIV/AIDS患者中HSV-1、HSV-2、VZV、CMV、HHV-6、HHV-8 阳性率均高于健康体检者,其中AIDS患者VZV感染率与HIV携带者有显著性差异;在AIDS患者中多种疱疹病毒共感染普遍存在,必须重视HIV/AIDS患者合并疱疹病毒感染的防治。 性病可促进HIV的传播,了解性病患者的HIV感染状况及临床特征具有重要的意义。在自愿接受HIV咨询检测的基础上,对临床确诊的412例性病患者进行HIV-1/2抗体检测,并对其临床特征进行分析研究。结果显示412例性病患者的HIV检出率为2.9%。性病患者中检出HIV阳性率依次为:尖锐湿疣(6.2%)、生殖器疱疹(4.2%)、梅毒(3.4%)、淋病(1.5%)及非淋菌性尿道炎(1.0%)。83.3%合并感染HIV的性病患者存在多性伴,商业性行为普遍存在,安全套使用率极低现象。感染HIV的尖锐湿疣及生殖器疱疹患者以频繁复发为突出表现,1例合并感染HIV的梅毒患者半年即进展为神经梅毒。性病患者是HIV感染的重要高危人群,危险性行为是其感染HIV和其它性病的主要原因,应该加强性病患者的HIV检测。对临床上频繁复发的尖锐湿疣及生殖器疱疹患者、快速进展的梅毒患者应高度怀疑合并HIV感染的可能。
Resumo:
Tris(2,2'-bipyridine)ruthenium(II) ((Ru(bpy)(3)](2+)) is one of the most extensively studied and used electrochemiluminescent (ECL) compounds owing to its superior properties, which include high sensitivity and stability under moderate conditions in aqueous solution. In this paper we present a simple method for the preparation of [Ru(bpy)(3)](2+)-containing microstructures based on electrostatic assembly The formation of such micro-structures occurs in a single process by direct mixing of aqueous solutions of [Ru(bpy)(3)]Cl-2 and K-3[Fe(CN)(6)] at room temperature. The electrostatic interactions between [Ru(bpy)(3)]Cl-2 cations and [Fe(CN)(6)](3-) anions cause them to assemble into the resulting microstructures. Both the molar ratio and concentration of reactants were found to have strong influences on the formation of these microstructures. Most importantly, the resulting [Ru(bpy)(3)](2+)- containing microstructures exhibit excellent ECL behavior and, therefore, hold great promise for solid-state ECL detection in capillary electrophoresis (CE) or CE microchips.
Resumo:
The oxovanadium phosphonates (VO(P-204)(2) and VO(P-507)(2)) activated by various alkylaluminums (AlR3, R = Et, i-Bu, n-Oct; HAIR(2), R = Et, i-Bu) were examined in butadiene (Bd) polymerization. Both VO(P-204)(2) and VO(P-507)(2) showed higher activity than those of classical vanadium-based catalysts (e.g. VOCl3, V(acac)(3)). Among the examined catalysts, the VO(P-204)(2)/Al(Oct)(3) system (I) revealed the highest catalytic activity, giving the poly(Bd) bearing M-n of 3.76 x 10(4) g/mol, and M-w/M-n ratio of 2.9, when the [Al]/[V] molar ratio was 4.0 at 40 degrees C. The polymerization rate for I is of the first order with respect to the concentration of monomer. High thermal stability of I was found, since a fairly good catalytic activity was achieved even at 70 degrees C (polymer yield > 33%); the M-n value and M-w/M-n, ratio were independent of polymerization temperature in the range of 40-70 degrees C. By IR and DSC, the poly(Bd)s obtained had high 1,2-unit content (> 65%) with atactic configuration. The 1,2-unit content of the polymers obtained by I was nearly unchanged, regardless of variation of reaction conditions, i.e. [Al]/[V], ageing time, and reaction temperature, indicating the high stability of stereospecificity of the active sites.
Resumo:
A new compound [H(2)en](2)[H3O](6)[Co(H2O)(2)(VO)(8)(OH)(4)(PO4)(8)] has been hydrothermally synthesized. Single crystal X-ray analysis indicates that this compound crystallizes in a monoclinic system, space group P2(1)/n with a=1.438 5(3) nm, b=1.012 2(2) nm, c=1.832 5(4) nm, beta=90.21degrees, V=2.668 2 (9) nm(3), Z = 2, D-c = 2.112 g/cm(3), R = 0.055, wR = 0.149 7, S = 1.037. The structure of [H(2)en](2)[H3O](6)[Co(H2O)(2)(VO)(8)(OH)(4)(PO4)(8)] is characterized by P-V-O layers constructed by [(VO)4 (OH)(2)(PO4)(4)](6-) non-symmetric units. The P-V-O layers are pillared by [Co(H2O)(2)](2+) group, resulting in the channels within which the protonated diaminoethane and H3O+ are located.
Resumo:
Crystal and molecular structure of (2.6-dipropylphenylamide) dimethyl (tetra-methyl cyclopentadienyl) silane titanium dichloride (I) was fully characterized by X-ray diffraction. The crystal is obtained from a mixture of ether/hexane as orthorhombic. with a = 12.658 (3) Angstrom. b = 16.62 (3) Angstrom. c = 11.760 (2) Angstrom. V = 2474.2 (9) Angstrom(3). Z = 4, space group Pnma. R = 0.0399; Componud I compose of the pi-bounded ring with its dimethylsilyl-dipropyl phenyl amido group and the two terminal chloride atoms coordinated to central metal to form a so-called constrained geometry catalyst (CGC) structure. The result of molecular mechanics (MM) calculations on compound I shows that bond lengths and bond angles from the MM calculation are comparable to the data obtained from the X-ray diffraction study. The relation of the structure of CGCs and their catalytic activity by MM calculations is also discussed.
Resumo:
Reaction of thiamine or thiamine monophosphate (TMP) with K2Pt(NO2)(4) afforded a metal complex, Pt(thiamine)(NO2)(3) (1), and two salt-type compounds, (H-thiamine)[Pt(NO2)(4)]. 2H(2)O (2) and (TMP)(2)[Pt(NO2)(4)]. 2H(2)O (3), which were structurally characterized by X-ray diffraction. In 1, the square-planar Pt2+ ion is coordinated to the pyrimidine N(1'), a usual metal-binding site, and three NO2- groups. The thiamine molecule exists as a monovalent cation in 1 and a divalent cation in 2 while the TMP molecule is a monovalent cation in 3. In each compound, thiamine or TMP adopts the usual F conformation and forms two types of host-guest-like interactions with anions, which are of the bridging forms, C(2)-H . . . anion . . . pyrimidine-ring and N(4'1)-H(...)anion(...)thiazolium-ring. In 3, there is an additional anion-bridging interaction between the pyrimidine and thiazolium rings of TMP, being of the form C(6')-H . . . anion . . . thiazolium-ring. The salts 2 and 3 show similar hydrogen-bonded cyclic dimers of thiamine or TMP between which the anions are held. Results are compared with those of the other thiamine-platinum complexes. (C) 2001 Elsevier Science B.V. All rights reserved.
Resumo:
The title complexes were synthesized and the crystal structures of their salts were determined by single-crystal X-ray structure analyses. Na-2[Zn-I(ida)(2)]. 7H(2)O: Triclinic, P1, a=0.523 4(2) nm, b=0.897 10(10) nm, c=1.069 10(10) nm, alpha=85.910(10)degrees, beta= 76.380(10)degrees, gamma=83.52(2)degrees, V=0.484 2(2) nm(3), Z=1. The complex anion [Zn-I (ida)(2)](2-) has a pseudo-octahedral structure in which the two N atoms: are in a trans configuration. Na-4[Hg-I(nta)(2)]. 7H(2)O: Monoclinic, C-c, a = 1.795 0(4) nm, b = 0.892 9(2)nm, c = 1.575 4(2) nm, beta = 92.78 (3)degrees, V = 2.526 2(9) nm(3), Z = 4. The complex anion [Hg-I (nta)(2)](4-) has a pseudo-bicapped-octahedral structure in which the two N atoms are in a trans configuration.
Resumo:
The aim of this study was to optimize the cryopreservation protocols for the sperm of red seabream, Pagrus major. The 2-mL cryovials and programmable freezer were employed for cryopreservation. Six extenders, six cryoprotectants in various concentrations ranging from 6 to 20% (v/v), four cooling rates, and three thawing temperatures were evaluated by postthaw sperm motility and fertility. The ratio of sperm to egg for postthaw sperm fertilization trials was experimentally standardized and was optimal at 500:1. The best motility of postthaw sperm (79.4 +/- 4.7% to 88.6 +/- 8.0%), fertilization rates (89.6 +/- 2.9 to 95.6 +/- 1.9%), and hatching rates (85.3 +/- 5.1% to 91.4 +/- 4.3%) were achieved when Cortland extender, dimethyl sulfoxide (15, 18, and 20%) or ethylene glycol (9, 12%) as cryoprotectants, 20 C/min as the cooling rate, and 40 C as the thawing temperature were employed. Moreover, the results on embryonic development were not significantly different between cryopreserved sperm and fresh sperm during incubation process. In conclusion, these methods of cryopreservation of red seabream sperm are suitable for routine aquaculture application and preservation of genetic resources.
Resumo:
Research on naïve biology investigates children spontaneous understanding of biology objects, phenomena and function. Previous researches focus mostly on biology phenomena. Little has done on organism’s function, such as eating food. Many research in this field found that children were unable to categorize food by nutrition criterion, but rely on physical cues. In order to investigate the development of children’s naïve understanding of food and to find if they can classify food by nutrition criterion, three age groups (5-year-olds, 7-year-olds, and 9-year-olds) were included in this study. Varies experimental tasks were also used to explore the children’s understanding of food and its function. The results showed as the followings: 1) A few 5-year- old children can classify food by nutrition criterion when they take the spontaneous classification task. However, more and more children can realize what make a kind of food different from another can be the nutrition it contains. 2) Kindergarteners can find the relation between food and its output. When they become older, more and more children can explain the relation by consistent theory. It can be said that 9-year-old children have already have a profound understanding of nutrition. They gradually developed naive theory of biology on nutrition level. 3) Even kindergarteners can understand the concept of “food balance”. However, with development there was a significant age increase in food balance choice. 4) Children’s knowledge of food balance grows with age, but urban and rural educational background influence cognitive performance.
Resumo:
An Nd:glass laser pulse (18 ns, 1.38 J) is focused in a tiny area of about 100-mum diam under ambient conditions to produce micro-shock waves. The laser is focused above a planar surface with a typical standoff distance of about 4 mm, The laser energy is focused inside a supersonic circular jet of carbon dioxide gas produced by a nozzle with internal diameter of 2.9 mm and external diameter of 8 mm, Nominal value of the Mach number of the jet is around 2 with the corresponding pressure ratio of 7.5 (stagnation pressure/static pressure at the exit of the nozzle), The interaction process of the micro-shock wave generated inside the supersonic jet with the plane wall is investigated using double-pulse holographic interferometry. A strong surface vortex field with subsequent generation of a side jet propagating outward along the plane wail is observed. The interaction of the micro-shock wave with the cellular structure of the supersonic jet does not seem to influence the near surface features of the flowfield. The development of the coherent structures near the nozzle exit due to the upstream propagation of pressure waves seems to be affected by the outward propagating micro-shock wave. Mach reflection is observed when the micro-shock wave interacts with the plane wall at a standoff distance of 4 mm, The Mach stem is slightly deflected, indicating strong boundary-layer and viscous effects near the wall. The interaction process is also simulated numerically using an axisymmetric transient laminar Navier-Stokes solver. Qualitative agreement between experimental and numerical results is good.
Resumo:
在线性分层的水体中,由拖动竖条形栅格产生湍流锋面,通过阴影可视化技术考察了锋面的流态和运动行为,将锋面迹线经过图像处理,获得了锋面运动特征的有关信息:运动速度随时间的增长关系;锋面坍塌的平均无因次特征时间为NT_c=2.9,它随湍流Froude数Fr_i的增大而减小;锋面的特征尺度H_f与栅格运动的参数有关;当湍流演化成内波时,对锋面与内波运动间的关系进行了初步探讨和分析。
Resumo:
The oscillatory behaviour of the Rayleigh-Marangoni-Bénard convective instability (R-M-B instability) regarding two combinations of two-layer fluid systems has been investigated theoretically and numerically. For the two-layer system of Silicone oil (10cSt) over Fluorinert (FC70), both linear instability analysis and 2D numerical simulation show that the instability of the system depends strongly on the depth ratio Hr = H1/H2 of the two-layer liquid. The oscillatory regime at the onset of R-M-B convection enlarges with reducing Γ = Ra/Ma values. In the two-layer system of Silicone oil (2cSt) over water, it loses its stability and onsets to steady convection at first, then the steady convection bifurcates to oscillatory convection with increasing Rayleigh number Ra. This behaviour was found through numerical simulation above the onset of steady convection in the case of r = 2.9, ε=(Ra-Ruc)/Rac = 1.0, and Hr = 0.5. Our findings are different from the previous study of the Rayleigh-Benard instability and show the strong effects of the thermocapillary force at the interface on the time-dependent oscillations at or after the onset of convection. We propose a secondary oscillatory instability mechanism to explain the experimental observation of Degen et al. [Phys. Rev. E, 57 (1998), 6647-6659].
Resumo:
The growth of InAsxSb1-x films on (100) GaSb substrates by liquid-phase epitaxy (LPE) has been investigated and epitaxial InAs0.3Sb0.7 films with InAs0.9Sb0.09 buffer layers have been successfully obtained. The low X-ray rocking curve FHWM values of InAs0.3Sb0.7 layer shows the high quality of crystal-orientation structure. Hall measurements show that the highest electron mobility in the samples obtained is 2.9 x 10(4) cm(2) V-1 s(-1) and the carrier density is 2.78 x 10(16)cm(-3) at room temperature (RT). The In As0.3Sb0.7 films grown on (10 0) GaSb substrates exhibit excellent optical performance with a cut-off wavelength of 12 mu m. (c) 2007 Elsevier B.V. All rights reserved.
Resumo:
提出了用分层抽样-重要性抽样复合法计算接管的断裂失效概率,并与直接抽样的MonteCarlo法进行了比较,结果表明:用复合法计算接管断裂失效概率不但精度高,而且大幅度节省机时,提高效率。