关于弹性体固有频率的两个变分原理

<正> 对于几何形狀较复雜的彈性体,要嚴格地根据彈性体力学的全部方程來决定它的固有频率是有很大的困难的,因此在实际上常常采用了各式各样的近似解法,其中最有名的近似解法要算根据萊瑞原理的变分解法(称为萊瑞黎茲法)。在許多問題中,萊瑞黎兹法給出了滿意的結果。但是这个方法在实用上及理論上遺留下两个問題:第一、在許多問題中,我們往往能对应力分布的情況作适当的估計,可是这些估計在萊瑞黎兹法中不能加以充分利用;第二、在各种近似理論中,例如在梁、板、壳的近似理論中,虽然都各有自己的萊瑞原理,可是这些原理并不是彈性体力学中的萊瑞原理的直接的特殊形式。

Diffusion dominated process for the crystal growth of a binary alloy

The pure diffusion process has been often used to study the crystal growth of a binary alloy in the microgravity environment. In the present paper, a geometric parameter, the ratio of the maximum deviation distance of curved solidification and melting interfaces from the plane to the radius of the crystal rod, was adopted as a small parameter, and the analytical solution was obtained based on the perturbation theory. The radial segregation of a diffusion dominated process was obtained for cases of arbitrary Peclet number in a region of finite extension with both a curved solidification interface and a curved melting interface. Two types of boundary conditions at the melting interface were analyzed. Some special cases such as infinite extension in the longitudinal direction and special range of Peclet number were reduced from the general solution and discussed in detail.

Experiment on the thermocapillary convection of a mercury liquid bridge in a floating half zone

A liquid bridge of a floating half zone consisting of liquid mercury sealed in a glass tube with nitrogen atmosphere was used for the experiment of thermocapillary convection with a low Prandtl number liquid. A non-contacted diagnostic method was developed to monitor the surface flow and the surface oscillation. A growing surface film (or skin) is a crucial source to suppress thermocapillary convection, and is discussed in this paper. For the case of a mercury Liquid bridge, the critical Marangoni number was obtained as 900, and the oscillatory frequency was around 5 Hz.

不可压缩流体三维Rayleigh-Taylor不稳定性的大涡模拟

对不可压缩流体三维Rayleigh-Taylor不稳定性问题建立被动标量输运模型，用大涡模拟方法计算了正弦初始扰动和随机初始扰动下不稳定性发展各个阶段的瞬时速度度场和标量场，以及混合过程中计算尺度和亚格子尺度上的平均湍流脉动能、平均剪切应力和被动标量通量；分析了 界面形状、被动标量浓度分布的演化规律及气泡、尖钉速度和混合层宽度随时间的变化规律，计算结果与其他数值模拟和实验结果相吻合，验证了大涡模拟方法应用于该问题的可行性。

民航客机防爆箱的研制

本文简介研制民航客舱防爆箱遇到的困难,指出这是爆炸火球区内抗爆容器的设计问题。在实验和理论分析基础上,就爆炸火球区内抗爆措施提出了建议并得到验证。

Discontinuous growth mechanisms of mode II crack under high-speed impact conditions

A recoverable plate impact testing technology has been used for studying the growth mechanisms of mode II crack. The results show that interactions of microcracks ahead of a crack tip cause the crack growth unsteadily. Failure mode transitions of materials were observed. Based on the observations, a discontinuous crack growth model was established. Analysis shows that the shear crack grows unsteady as the growth speed is between the Rayleigh wave speed c(R) and the shear wave speed c(s); however, when the growth speed approaches root 2c(s), the crack grows steadily. The transient microcrack growth makes the main crack speed to jump from subsonic to intersonic and the steady growth of all the sub-cracks leads the main crack to grow stably at an intersonic speed.