Some theoretical aspects of the simplified Navier-Stokes(SNS) equations

This study deals with the formulation, mathematical property and physical meaning of the simplified Navier-Stokes (SNS) equations. The tensorial SNS equations proposed is the simplest in form and is applicable to flow fields with arbitrary body boundaries. The zones of influence and dependence of the SNS equations, which are of primary importance to numerical solutions, are expounded for the first time from the viewpoint of subcharacteristics. Besides, a detailed analysis of the diffusion process in flow fields shows that the diffusion effect has an influence zone globally windward and an upwind propagation greatly depressed by convection. The maximum upwind influential distance of the viscous effect and the relative importance of the viscous effect in the flow direction to that in the direction normal to the flow are represented by the Reynolds number, which illustrates the conversion of the complete Navier-Stokes (NS) equations to the SNS equations for flows with large Reynolds number.

A discussion about a class of stress intensity factors and its verification

In this paper, new formulae of a class of stress intensity factors for an infinite plane with two collinear semi-infinite cracks are presented. The formulae differ from those gathered in several handbooks used all over the world. Some experiments and finite element calculations have been developed to verify the new formulae and the results have shown its reliability. Finally, the new formulae and the old are listed to show the differences between them.

Viscosity-induced mode splitting and potential energy criterion for mode stability

This paper points out that viscosity can induce mode splitting in a uniform infinite cylinder of an incompressible fluid with self-gravitation, and that the potential energy criterion cannot be appropriate to all normal modes obtained, i.e., there will be stable modes with negative potential energy (<0). Therefore the condition >0 is not necessary, although sufficient, for the stability of a mode in an incompressible static fluid or magnetohydrodynamics (MHD) system, which is a correction of both Hare's [Philos. Mag. 8, 1305 (1959)] and Chandrasekhar's [Hydrodynamic and Hydromagnetic Stability (Oxford U.P., Oxford, 1961), p. 604] stability criterion for a mode. These results can also be extended to compressible systems with a polytropic exponent.

Study on cracked spherical shells

The local-global anatysis method is systematically extended to the fracture analysis of spherical shells. On the basis of the shallow shell theory, which takes into account transverse shear deformations, governing equations for cracked spherical shells expressed in displacement and stress functions f, F and φ are proposed, and then a general solution including Modes, Ⅰ, Ⅱ, Ⅲ for stress-strain fields at crack tip in a spherical shell is obtained, which plays the same role as Williams's expansion in plane elasticity. The numerical results for finite-size spherical shells under different boundary conditions have been obtained. Furthermore, the bulging factors are analyzed with regard to shearing stiffness and an approximate formula is given.

冲击压缩下玻璃等脆性材料中失效波的研究进展

失效波的研究始于Rasorenov和Kanel发现K19玻璃样品后自由表面速度时程曲线上有反常再压缩信号。失效波是二十世纪九十年代冲击动力学研究领域的一个重要发现，它是指在一维平面应变冲击压缩下，在玻璃等脆性材料中由冲击波引起的一种独特的失效或破坏现象。较为系统地回顾近年来对失效波的研究工作，评述了研究现状、最新结果、发展趋势、研究方法和实验手段，对尚存的问题进行了分析讨论，并介绍了玻璃材料的基本特性。最后简单汇报了作者在这方面的研究工作和取得的阶段性结果。

GCr15钢超高周疲劳行为的实验研究

以GCr15钢为实验材料进行旋转弯曲超高周疲劳行为的实验研究。用光学显微镜和扫描电镜对试样疲劳断口进行观察 ,结果显示 ,疲劳断裂周次从 10 6 直到 4× 10 8,GCr15钢疲劳裂纹大多起源于试样内部 ,裂纹源一般为非金属夹杂物。从内部起裂的试样 ,疲劳寿命一般比从表面起裂试样的寿命长。文中从断裂力学和断裂物理的角度 ,对实验结果和疲劳机理进行分析

多环环间混杂复合材料飞轮离心应力分析

采用平面应力假设,给出了计算多环环间混杂复合材料飞轮的离心应力和初始极限转速的方法,并采用二维轴对称的有限元分析验证了计算方法的合理性,可作为初步设计多环环间混杂复合材料飞轮的依据.本文的算例分析还表明,无论单一纤维或混杂的复合材料飞轮,空心结构的初始极限转速和储能密度均高于相应的实心结构的结果;且对于空心结构,有利于通过选择合适的混杂方案,实现一定意义上的"等强度"设计.

燃烧物理学基础

Laminar Burning Velocities and Markstein Lengths of Premixed Methane/Air Flames near the Lean Flammability Limit in Microgravity

Effects of flame stretch on the laminar burning velocities of near-limit fuel-lean methane/air flames have been studied experimentally using a microgravity environment to minimize the complications of buoyancy. Outwardly propagating spherical flames were employed to assess the sensitivities of the laminar burning velocity to flame stretch, represented by Markstein lengths, and the fundamental laminar burning velocities of unstretched flames. Resulting data were reported for methane/air mixtures at ambient temperature and pressure, over the specific range of equivalence ratio that extended from 0.512 (the microgravity flammability limit found in the combustion chamber) to 0.601. Present measurements of unstretched laminar burning velocities were in good agreement with the unique existing microgravity data set at all measured equivalence ratios. Most of previous 1-g experiments using a variety of experimental techniques, however, appeared to give significantly higher burning velocities than the microgravity results. Furthermore, the burning velocities predicted by three chemical reaction mechanisms, which have been tuned primarily under off-limit conditions, were also considerably higher than the present experimental data. Additional results of the present investigation were derived for the overall activation energy and corresponding Zeldovich numbers, and the variation of the global flame Lewis numbers with equivalence ratio. The implications of these results were discussed. 2010 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

板料激光弯曲试验

针对大飞机壁板用的铝合金板料AA6056进行激光弯曲过程的试验研究.试验选用厚度为1.0 mm和2.5 mm的薄板,采用多组不同的工艺参数进行对比分析.采用直径0.1 mm的镍铬.镍硅热电偶作为温度传感器,YOKOGAWA MV200型便携式记录仪测量板料表面的温度;使用MV.1300UM CCD拍摄板料激光弯曲变形的过程,通过自行开发的实时采集软件记录并进行图像处理,最终得到了板料激光弯曲变形过程的实测曲线.试验结果为该过程的数值模拟提供了更为精确的验证依据,为深入研究板料激光弯曲过程奠定了试验基础.

Distribution of the microcrystallites generated in borate glass irradiated by femtosecond laser pulses

This paper deals with the distribution of generated microcrystallites in borate glass irradiated by 120 fs laser pulses at a central wavelength of 800 nm. Raman spectroscopy is used to investigate the distribution of the high and low temperature phases of barium metaborate crystals generated in the borate glass. In combination with a microexplosion model, bond-breaking induced by laser irradiation is served as the origin of the formation of BBO crystals. Depending on the laser fluence and cooling conditions, the distribution mechanisms have been discussed. (c) 2006 Elsevier B.V. All rights reserved.

孔径光阑限制下高斯光束的传输

对高斯光束在硬边孔径限制下的衍射进行了详细的理论研究，就不同口径的圆孔限制下高斯光束在菲涅耳衍射区和夫琅禾费衍射区的分布进行了理论分析，从而得到了孔径受限高斯光束的横向以及轴向的衍射公式，进而对高斯光束在不同衍射区域内衍射光场分布形状随孔径尺寸变化时的演化规律进行了数值计算，并对小口径光阑受限的高斯光束的衍射与平行光经同尺寸光阑的衍射进行了比较。结果表明在较小口径下，两者的分布基本一致。得到的孔径光阑限制下高斯光束的传输规律为高斯光束在自由空间光通信和光学超分辨中的应用提供了理论基础。

Analysis on a new type magneto-optical disk for blue lasers

The conventional TbFeCo magneto-optical (MO) medium has a relatively smaller Kerr rotation angle in the blue region than in the red. With the recording wavelength gradually moving to the short wavelength, if TbFeCo is still used as recording medium, the conventional MO disk structure must be optimized to get a larger carrier to noise ratio (CNR). Sabi et al. have found that adding a metal layer attached to the TbFeCo film as thermal control layer is a useful way to get a high CNR. In this paper, we proved this through calculation, and carried out optimization of the new type of disk. Calculation results showed that the new structure is useful in preventing an excessive temperature increase, and has a better thermal response. (c) 2005 Elsevier B.V. All rights reserved.

输出5W的电光调Q Nd：YAG陶瓷激光器

研究了激光二极管（LD）侧向抽运的Nd：YAG陶瓷电光调Q激光器的激光输出特性。该激光器采用九组激光二极管线阵列（LDA）侧面紧密环绕均匀排布的抽运结构，并用微通道热汇冷却技术冷却。在电光调Q方式下，重复频率为100Hz，抽运单脉冲能量为416mJ时，用尺寸为庐5mm×75mm，掺杂原子数分数为1％的Nd：YAG陶瓷棒，获得50mJ的1064nm激光输出，脉冲宽度为12ns，斜率效率达24％。并实验测量和分析了偏振片，KD^＊P晶体，四分之一波片等调Q器件的插入损耗。测量了输出激光时间波形和光斑的光强空间