激光智能制造系统中同步控制的实现

分析了激光智能制造系统中同步控制问题,利用现场总线机制和串口通讯机制实现控制计算机对机器人系统和激光器系统的同步控制;设计外围控制电路,实现在加工过程中控制计算机对系统的状态监视和故障处理;运用多线程程序机制设计应用程序,实现控制计算机对整个系统的实时与同步控制.所设计的系统运行稳定,满足了实际工程应用的要求.

深水土工调查技术和分析方法新进展

简要介绍了近年来国外在深水土工调查技术和分析方法方面取得的新进展,包括:钻孔取样技术在钻入模式和取样器的多样化和有效组合,从而实现不同水深和不同土类条件下的高质量取样;带孔压测量的圆锥触探试验在测量方法、孔压测量单元设计、探头的小型化和多样化、数据的快速传输以及分析理论方面的进展;减少土样扰动,准确评估粘土不排水抗剪强度的"SHANSEP"室内试验方法及应用。

电流密度因子及其分布规律

给出了具有裂纹的无限大导电薄板通入电流时,裂纹尖端电流密度因子的表达式,由电流密度与温度场的关系式进一步导出了电流密度因子与温度场的表达式.通过算例,描述了电流密度因子在裂尖附近的分布规律,为电磁热效应裂纹止裂方法的应用打下了理论基础.

抚顺煤田建筑破坏与地质灾害的关系

本文简要介绍了抚顺煤田的区域地质背景及受灾楼房调查结果,并对房屋建筑破坏特征进行了分析。同时,对大地测量结果、地质勘察及试验结果进行了讨论,结果表明:煤田开采诱发了浑河断裂抚顺段的局部活动。最后,综合分析得出断层活动引起的地基不均匀沉陷是造成该市建筑破坏的主要原因,且断层引起的地基不均匀沉陷不同于一般软基不均匀沉陷。

二维抛物化稳定性方程的特征和次特征

特征分析表明：对原始扰动量的抛物化稳定性方程组（PSE），它在亚、超音速区分别具有椭圆和抛物特性，给出PSE特征对马赫数的依赖关系，阐明PSE仅把信息对流-扩散传播特性抛物化，而保留了信息对流-扰动传播特性，因此PSE应称为扩散抛物化稳定性方程（DPSE）。

通过频率改变率进行损伤定位的方法研究

本文基于频率法进行损伤识别的基础，从理论上推导了损伤导致某阶频率降低与损伤位置的关系和该阶曲率模态／应变模态的振型变化相近。并通过数值仿真的结果验证了理论分析的结果。在此基础上给出了损伤状态下通过不同阶模态频率改变率比值来进行损伤定位的新方法，并将其应用于实际钢梁的分析中，得到了较好的结果。最后文中阐述了通过频率法进行损伤识别的优点和局限性。

Assessment of bursting detection methods with LES database of turbulent channel flows

Validated by comparison with DNS, numerical database of turbulent channel flows is yielded by Large Eddy Simulation (LES). Three conventional techniques: uv quadrant 2, VITA and mu-level techniques for detecting turbulent bursts are applied to the identification of turbulent bursts. With a grouping parameter introduced by Bogard & Tiedemann (1986) or Luchik & Tiederman (1987), multiple ejections detected by these techniques which originate from a single burst can be grouped into a single-burst event. The results are compared with experimental results, showing that all techniques yield reasonable average burst period. However, uv quadrant 2 and mu-level are found to be superior to VITA in having large threshold-independent range.

Research on Q-Switched Nd : YAG laser engraving

IN this paper, the engraving process with Q-Switched Nd:YAG laser is investigated. High power density is the pre- requisition to vapor materials, and high repetition rate makes the engraving process highly efficient. An acousto- optic Q-Switch is applied in the cavity of CW 200 W Nd:YAG laser to achieve the high peak power density and the high pulse repetition rate. Different shape craters are formed in a patterned structure on the material surface when the laser beam irradiates on it by controlling power density, pulse repetition rate, pulse quantity and pulse interval. In addition, assisting oxygen gas is used for not only improving combustion to deepen the craters but also removing the plasma that generated on the top of craters. Off-focus length classified as negative and positive has a substantial effect on crater diameters. According to the message of rotating angle positions from material to be engraved and the information of graph pixels from computer, a special graph is imparted to the material by integrating the Q- Switched Nd:YAG laser with the computer graph manipulation and the numerically controlled worktable. The crater diameter depends on laser beam divergence and laser focal length. The crater diameter changes from 50 micrometers to 300 micrometers , and the maximum of crater depth reaches one millimeter.

板壳断裂力学

本书阐明了板壳断裂理论的基础。论证了Reissner型板壳断裂理论的科学性、经典板壳断裂理论的缺陷及在一定范围内仍具有的实用价值；介绍了作者所创意的研究Reissner型板壳断裂纹尖端场的方法等。

目录

K418合金和42CrMo钢激光焊焊缝的微观组织

采用透射电镜及附带能谱(TEM-EDS)对K418高温合金涡轮盘和42CrMo合金钢转轴激光焊焊缝的微观组织进行了分析.结果表明:焊缝主要由树枝状非平衡凝固的FeCrNiC(γ)固溶体组成,此外,还有少量细小、弥散的Ni_3Alγ'相、Laves颗粒和少量MC碳化物分布在树枝晶之间区域;根据热动力学原理对形成这一组织特征的原因进行了简要讨论.

The diagnostics of density distribution for inhomogeneous dense DT plasmas using fast protons

The density distribution of inhomogeneous dense deuterium-tritium plasmas in laser fusion is revealed by the energy loss of fast protons going through the plasma. In our simulation of a plasma density diagnostics, the fast protons used for the diagnostics may be generated in the laser-plasma interaction. Dividing a two-dimensional area into grids and knowing the initial and final energies of the protons, we can obtain a large linear and ill-posed equation set. for the densities of all grids, which is solved with the Tikhonov regularization method. We find that the accuracy of the set plan with four proton sources is better than those of the set plans with less than four proton sources. Also we have done the density reconstruction especially. for four proton sources with and without assuming circularly symmetrical density distribution, and find that the accuracy is better for the reconstruction assuming circular symmetry. The error is about 9% when no noise is added to the final energy for the reconstruction of four proton sources assuming circular symmetry. The accuracies for different random noises to final proton energies with four proton sources are also calculated.

Surface-enhanced resonance Raman scattering spectroscopy of single R6G molecules

Surface-enhanced resonance Raman scattering (SERRS) of Rhodamine 6G (R6G) adsorbed on colloidal silver clusters has been studied. Based on the great enhancement of the Raman signal and the quench of the fluorescence, the SERRS spectra of R6G were recorded for the samples of dye colloidal solution with different concentrations. Spectral inhomogeneity behaviours from single molecules in the dried sample films were observed with complementary evidences, such as spectral polarization, spectral diffusion, intensity fluctuation of vibrational lines and even "breathing" of the molecules. Sequential spectra observed from a liquid sample with an average of 0.3 dye molecules in the probed volume exhibited the expected Poisson distribution for actually measuring 0, 1 or 2 molecules. Difference between the SERRS spectra of R6G excited by linearly and circularly polarized light were experimentally measured.

Spectroscopic properties of Er3+/Yb3+ codoped fluorophosphate glasses

Er3+/Yb3+ cocloped fluorophosphate glasses were prepared and their thermal stabilities, Raman spectra, absorption spectra, and fluorescence spectra were measured. It is found that proper content of NaF or PbF2 is helpful for the increase of stability against crystallization. The variation of AI(PO3)3 or NaF content in the composition affects not the maximum phonon energy but the phonon density. The introduction of PbF2 decreases the phonon energy slightly. Intense green and red upconversion luminescence was observed for the fluorophosphate glass with low phosphate content. A glass matrix for upconversion luminescence requiring neither expensive raw material nor special atmospheric conditioned preparation is provided. Infrared luminescence around 1530 nm was researched. Fluorophosphate glasses with bandwidth properties and stimulated-emission cross sections better than tellurite, germanate and silicate glasses are obtained. Through the introduction of NaF, the bandwidth properties are decreased. Through the introduction of PbF2 the gain properties are increased. On the whole, it is difficult to obtain a material with the best gain properties and bandwidth properties simultaneously. There should be a compromise between them according to the demand. (C) 2006 Elsevier B.V. All rights reserved.

Effect of annealing and gamma irradiation on undoped and Eu3+-doped Y2SiO5 single crystals

The absorption spectra of the undoped Y2SiO5 and Eu3+-doped Y2SiO5 crystals grown by the Czochralski technique were compared before and after annealing and, similarly, the unannealed and annealed crystals after gamma-ray irradiation. The absorption bands of Eu2+ ions with peaks at 300 and 390 nm were observed in the as-grown Y2SiO5:Eu3+ crystal. These peaks were more intense in H-2-annealed and irradiated Y2SiO5:Eu3+ crystals. The additional absorption peaks at 260 and 320-330 nm which were attributed to F color centers and O- hole centers were observed in irradiated undoped Y2SiO5 and Y2SiO5:Eu3+ crystals, respectively. (c) 2005 Elsevier B.V. All rights reserved.