Synthesis and electrical properties of new solid state. Electrolyte materials Ce5.2RE0.8MoO15-delta

A series of solid state electrolytes, Ce-5.2 RE0.8 MoO15-delta (RE = Y, La, Sm, Gd, Dy, Ho, Er), were synthesized by sol-gel method. Their structures and electrical conductivities were characterized by X-ray Diffraction (XRD), Raman and X-ray Photoelectron Spectroscopy (XPS) and AC impedance spectroscopy, respectively. The results show that the concentrations of oxygen vacancy increased with increasing x and their conductivity were improved. And the cell parameters increase as the radius of RE3+ increases. Because the ionic radius of doped Dy3+ (0.0908 nm) is closed to that of Ce4+ (0.0920 nm), their oxide has minimal cell elastic straining between RE3+ and oxygen vacancy, and the system has the least association enthalpy, thus the oxide Ce-5.2 Dy-0.8 MoO15-delta exhibits a higher conductivity (7.02 x 10(-3) S/cm) and lower activation energy (1.056 eV) compared to the other doped compounds.

Synthesis and characterization of novel poly(ester carbonate)s based on pentaerythritol

Novel poly(ester carbonate)s were synthesized by the ring-opening polymerization Of L-lactide and functionalized carbonate monomer 9-phenyl-2,4,8,10-tetraoxaspiro[5,5]undecan-3-one derived from pentaerythritol with diethyl zinc as an initiator. H-1 NMR analysis revealed that the carbonate content in the copolymer was almost equal to that in the feed. DSC results indicated that T-g of the copolymer increased with increasing carbonate content in the copolymer. Moreover, the protecting benzylidene groups in the copolymer poly(L-lactide-co-9-phenyl-2,4,8,10-tetraoxaspiro[5,5]undecan-3-one) were removed by hydrogenation with palladium hydroxide on activated charcoal as a catalyst to give a functional copolymer, poly(L-lactide-co-2,2-dihydroxylmethyl-propylene carbonate), containing pendant primary hydroxyl groups. Complete deprotection was confirmed by H-1 NMR and FTIR spectroscopy. The in vitro degradation rate of the deprotected copolymers was faster than that of the protected copolymers in the presence of proteinase K. The cell morphology and viability on a copolymer film evaluated with ECV-304 cells showed that poly(ester carbonate)s derived from pentaerythritol are good biocompatible materials suitable for biomedical applications.

Co-assembly of ferrocene-terminated and alkylthiophene thiols on gold and its redox chemistry modulated by surfactant adsorption

Coadsorption of ferrocene-terminated alkanethiols (FcCO(2)(CH2)(8)SH, Fc=(mu(5)-C5H5)Fe(mu(5)-C5H4)) with alkylthiophene thiols (2-mercapto-3-n-octylthiophene) yields stable, electroactive self-assembled monolayers on gold. The resulting mixed monolayer provides an energetically favorable hydrophobic surface for the adsorption of the surfactant aggregates in aqueous solution. The adsorptions have been characterized via their effect on the redox properties of ferrocenyl alkanethiols immobilized as minority components in the monolayers and on the interfacial capacitance of the electrode. Surfactant adsorption causes a decrease in the overall capacitance at the electrode and dramatically shifts the redox potential for ferrocene oxidation in a positive or negative direction depending on the identity of the surfactant employed. A structural model is proposed in which the alkane chains of the adsorbed surfactants interdigitate with those of the underlying self-assembled monolayer, leading to the formation of a hybrid bilayer membrane.

Preparation of a carbon supported Pt catalyst using an improved organic sol method and its electrocatalytic activity for methanol oxidation

The organic sol method for preparing ultrafine transition metal colloid particles reported for the first time by Bonnemann et al. [H. Bonnemann, W Brijoux, R. Brinkmann, E. Dinjus, T. Jou beta en, B. Korall, Angew. Chem. Int. Ed. Engl., 30 (1991) 1312] has been improved in this paper. The improved organic sol method uses SnCl2 as the reductant and methanol as the organic solvent. Thus, this method is very simple and inexpensive. It was found that the average size of the Pt particles in the Pt/C catalysts can be controlled by adjusting the evaporating temperature of the solvent. Therefore, the Pt/C catalysts prepared by the same method are suitable for evaluating the size effect of the Pt particles on electrocatalytic performance for methanol oxidation. The results of the X-ray diffraction (XRD) and transmission electron microscopy (TEM) showed that when the evaporating temperatures of the solvent are 65, 60, 50, 40, and 30 degrees C, the average sizes of the Pt particles in the Pt/C catalysts prepared are: 2.2, 3.2, 3.8, 4.3, and 4.8 nm, respectively. The X-ray photoelectron spectroscopic (XPS) results demonstrated that the small Pt particles are easily oxidized and the decomposition/adsorption of methanol cannot proceed on the surfaces of Pt oxides.

Independence of the brittle-ductile transition from the rubber particle size for impact-modified poly(vinyl chloride)

A series of acrylic impact modifiers (AIMS) with different particle sizes ranging from 55.2 to 927.0 nm were synthesized by seeded emulsion polymerization, and the effect of the particle size on the brittle-ductile transition of impact-modified poly(vinyl chloride) (PVC) was investigated. For each AIM, a series of PVC/AIM blends with compositions of 6, 8, 10, 12, and 15 phr AIM in 100 phr PVC were prepared, and the Izod impact strengths of these blends were tested at 23 degrees C. For AIMs with particle sizes of 55.2, 59.8, 125.2, 243.2, and 341.1 nm, the blends fractured in the brittle mode when the concentration of AIM was lower than 10 phr, whereas the blends showed ductile fracture when the AIM concentration reached 10 phr. It was concluded that the brittle-ductile transition of the PVC/AIM blends was independent of the particle size in the range of 55.2-341.1 nm. When the particle size was greater than 341.1 nm, however, the brittle-ductile transition shifted to a higher AIM concentration with an increase in the particle size. Furthermore, the critical interparticle distance was found not to be the criterion of the brittle-ductile transition for the PVC/AIM blends.

肽链长度对La~(3+)与微过氧化物酶相互作用的影响

为了了解稀土元素与酶相互作用的化学机理,用紫外-可见(UV-Vis)吸收光谱技术和电化学方法研究了La3+与过氧化物酶(POD)的模型化合物,微过氧化物酶-8(MP-8)或微过氧化物酶-11(MP-11)的相互作用机理.La3+优先与MP-8或MP-11分子中血红素卟啉环上的2个丙酸基团的羰基氧发生键合作用,使它们的聚集程度降低,卟啉环的非平面性增加.由于MP-8分子聚集的倾向要小于MP-11,La3+使MP-8聚集程度的降低和卟啉环非平面性增加的程度要大于MP-11.由于MP-11的肽链较长而能形成螺旋状构象,使肽链上的羰基基团被包埋在肽链的疏水基团中,因此,La3+与MP-11中肽链上的羰基氧基本上不能发生键合作用.而MP-8的肽链较短,不能形成螺旋状结构,La3+也能与肽链上的羰基氧发生键合作用.

Optical spectroscopy properties of KMgF3 : Eu2+ nanocrystals and powder synthesized by microemulsion and solvothermal process

Nanocrystals and powders of KMgF3 doped with Eu2+ were synthesized by the microemulsion method and the solvothermal process, respectively. The emission and excitation spectra of KMgF3:Eu2+ phosphors were measured and compared with those of the samples synthesized through a solid. state reaction, Bridgman-Stockbarger method, and mild hydrothermal technique. The KMgF3: Eu2+ samples synthesized by means of the microemulsion method and the solvothermal process show only a sharp emission peak located at 360 nm, in the emission spectra, which arises from the f -> f(P-6(1/2)-> S-8(1/2)) transition of Eu2+. The broad emission bands appear at 420 nm,,which arises from Eu2+ <- O2- cannot be observed(in the mild hydrothermal and single crystal samples, the emission peak at 420 nm besides the emission of Eu2+ at 360 nm is observed). In the excitation spectrum of the KMgF3: Eu2+ samples synthesized by the microemulsion method and the solvothermal process, the excitation peaks show an intensive blue shift. The blue shift can he attributed to the lower oxygenic content in the KMgF3: Eu2+ samples synthesized by the microemulsion method and the solvothermal process.

新型笼状同多钒酸盐[Ni(1,10′-phen)_3]_2·[V_2~ⅣV_8~ⅤO_(26)]的水热合成和晶体结构

尽管多金属氧酸盐 (POMs)的研究已有180多年的历史,但大量的POMs结构在最近几十年才被陆续解析出来[1～4].其中 ,同多钒酸盐由于钒配位几何形状的多样性,结构最为丰富 ,例如:[V4 O12 ]4-[5],[V5O14 ]3-[6],[V10 O2 8]6-[7] ,[V15O4 2 ]9-[8],[V13 O3 4 ]3-[9].值得注意的是,在这些化合物中,钒的化合价均处于最高氧化态+5价.由于+4价钒不易在溶液中(尤其是水中)稳定存在,因此在以往的常压溶液合成中具有混合价态的同多钒酸盐报道很少.与饱和价态的同多钒酸盐相比,混价多钒酸盐具有更为新奇的电荷分布和拓扑学几何构型,并且在 POMs的理论研究和抗病毒药物、电存储材料以及磁性材料等应用领域有特殊的研究和开发价值[1,10,11].因此,制备具有混价的新型同多钒酸盐一直倍受关注.近年来,水热合成技术的引入使同多钒酸盐合成化学迅速发展.水热体系提供了一个特殊的反应环境 [12 ],使制备各种具有混合价态的同多钒酸盐成为可能.Müller等[13]对这一领域开...

朝鲜淫羊藿中生物碱类新成分的分离提取及结构鉴定

淫羊藿系小檗科淫羊藿属植物 ,具有补肾壮阳、强筋骨、祛风湿之功效 .现代药理研究表明 ,它还具有防治骨质疏松和提高免疫功能等作用 .2 0 0 0年版中国药典收载了 5种淫羊藿属植物 ,朝鲜淫羊藿为其中一种 ,是长白山道地中药材之一 .朝鲜淫羊藿中化学成分的研究多集中在黄酮类化合物方面 [1～ 6 ] ,而对其生物碱类化合物的研究较少 [7,8] .本文对朝鲜淫羊藿中生物碱类化合物进行了研究 ,并发现了一种新的生物碱 (6-羟基 -1 1 ,1 2 -二甲氧基 -2 ,2 -二甲基 -1 ,8-二氧 -1 ,3 ,4,8-四氢 -2 H -7-氧杂 -2 -氮 -苯并 [c]菲 ) ,采用核磁共振波谱技术鉴定了该化合物的结构 ,并用电喷雾多级串联质谱对其结构的正确性进行了验证 .1　实验部分1 .1　仪器　APEX FT-ICRMS高分辨质谱仪 (德国 Bruker Daltonnics公司 ) ;FTS-7型红外光谱仪(美国 BIO-RAD公司 ) ;AV40 0核磁共振波谱仪 (德国 Bruker公司 ) ,以 CDCl3作溶剂及内标 ;X-4数字显示显微熔点仪 (北京泰克仪器有限公司 ) ;MSn在 ...

Electrochemiluminescence of dichlorotris (1,10-phenanthroline) ruthenium (II) with peroxydisulfate in purely aqueous solution at carbon paste electrode

The electrochemiluminescence (ECL) of dichlorotris (1,10-phenanthroline) ruthenium (11) [Ru(phen)(3)(2+)] with peroxydisulfate (S2O82-) was first described. The use of carbon paste electrodes, organic solvent modified electrodes, allowed obtaining ECL in purely aqueous solution. The ECL produced by the reaction of electrogenerated C Ru(phen)(3)(2+) with the strongly oxidizing intermediate SO4-., was observed only when the applied potential was negative enough to reduce Ru(phen)(3)(2+). In comparison with Ru(bpy)(3)(2+)/S2O82- ECL, the Ru(phen)(3)(2+)/O-8(2-)/S2O82- ECL was more stable in aqueous solution. It was not affected by the storage of the carbon paste electrodes, and it quenched only at quite high S2O82- concentrations. The ECL intensity was a function of S2O82- concentration, increasing linearly with the S2O82- concentration from 5 X 10(-6) to 2 X 10(-3) mol l(-1), and dropping off sharply at S2O82- concentration higher than 20 mmol l(-1). The proposed ECL method with Ru(phen)(3)(2+) was sensitive and selective for the determination of S2O82-. (C) 2002 Elsevier Science B.V. All rights reserved.

Solvent-dependent formation of di- and trinuclear rhodiurn and iridium complexes bridged by N,N '-donor ligands

Reactions of Rh and Ir hydrido complexes. [Rh(H)(2)(PPh3)(2)(solv)(EtOH)]ClO4 (solv = Me2CO, 1a; EtOH, 1b) and [Ir(H)(2)(PPh3)(2)(Me2CO)(2)]BF4 (2), with various N,N'-donor bridging ligands, such as pyrazine (pyz), 4,4'-trimethylenedipyridine (tmdp) and di(4-pyridyl) disulfide (dpds), in some solvents were examined, and their reaction products were characterized by X-ray crystal structure analysis. IR, H-1 NMR and UV-vis spectra. Rh hydrido complexes, la or 1b, formed a dinuclear Rh complex, [Rh-2(PPh3)(2) {(eta(6)-C6H5PPh2}(2)] (ClO4)(2).6CH(2)Cl(2) (3.6CH(2)Cl(2)), in dichloromethane with a reductive elimination of hydrogen. The reactions of 1a or 1b with the pyz ligand in dichloromethane and tetrahydrofuran gave triangular Rh-3 complexes, [Rh-3(PPh3)(6)(pyz)(3)](ClO4)(3).CH2Cl2 (5.CH2Cl2) and [Rh-3(PPh3)(6)(pyz)(3)](ClO4)(3).EtOH (5.EtOH), respectively, in contrast to the formation of a dinuclear Rh hydrido complex, [Rh-2(H)(4)(PPh3)(4)(Me2CO)(2)(pyz)](ClO4)(2).EtOH A-EtOH). in acetone. The reactions of la or 1b with the tmdp ligand in dichloromethane and 3-methyl-2-butanone also afforded dinuclear Rh complexes, [Rh-2(PPh3)(4)(tmdp)(2)](ClO4)(2) (6) and [Rh-2(PPh3)(4)(tmdp)(2)](ClO4)(2).4MeCOCHMe(2) (6.4MeCOCHMe(2)), respectively. On the other hand, Ir hydrido complex 2 reacted with pyz and dpds ligands in dichloromethane to afford dinuclear Ir complexes, [Ir-2(H)(4)(PPh3)(4)(Me2CO)(2)(pyz)]- (BF4)(2).3CH(2)Cl(2) (7.3CH(2)Cl(2)) and [Ir-2(H)(4)(PPh3)(4)(dpds)(2)](BF4)(2).3CH(2)Cl(2).H2O (8.3CH(2)Cl(2).H2O), respectively, without any reductive elimination of hydrogen. Based on structural studies in solution and in the solid state. it was demonstrated that various Rh and Ir complexes were selectively produced depending on the choice of solvents and N,N'-donor bridging ligands.

Zn_4B_6O_(13)∶Ce~(3+),Tb~(3+)的合成与发光

高温固相扩散方法首次合成了Zn4 B6 O1 3:Ce3+ ,Tb3+ 光致发光材料。通过XRD分析获得晶胞参数 :a =0 7472nm ,V =0 .4172nm3,为立方晶系。研究Ce3+ 和Ce3+ ,Tb3+ 在Zn4 B6 O1 3中的激发和发射光谱 ,发现Ce3+ 在Zn4 B6 O1 3中的激发和发射带比Ce3+ 在其他基质中红移2 3 8～ 4.94KK ,Ce3+ 的发射带与Tb3+ 的 7F6 → 5G2 ,5D1 ,5H7吸收带有很好的重叠 ,使Ce3+ 对Tb3+ 有良好的敏化作用。Ce3+ ,Tb3+ 在基质中的能量传递机理为 :Ce3+ →Ce3+ 和Ce3+ →Tb3+ 之间的偶极子—偶极子的电多级相互作用的共振传递机理。色坐标为 :x =0 2 81,y =0 .619。SEM摄取产物的晶貌 ,颗粒均匀 ,平均粒度为 0 .2 3 μm ,接近纳米级。

长白山白眉蝮蛇蛇毒精氨酸酯酶1的研究Ⅰ.纯化、分子量测定及纯度鉴定

利用离子交换 (DEAESephadexA - 50 )和凝胶过滤层析 (SephadexG - 75)技术首次从长白山白眉蝮蛇蛇毒 (AgkistrodonblomhoffiiUssurensis)中纯化得到了一种精氨酸酯酶纯品。经SDS -聚丙烯酰胺凝胶电泳(SDS -PAGE)以及基质辅助激光解吸电离飞行时间质谱 (MALDI/TOF/MS)鉴定为单一纯蛋白 ,分子量为2 991 8.5± 1 5Da ,为进一步研究其结构与功能提供了可靠的依据。

长白山白眉蝮蛇蛇毒精氨酸酯酶1的研究Ⅱ.酶学性质和荧光光谱研究(续Ⅰ)

测得了长白山白眉蝮蛇毒精氨酸酯酶 1的最适反应的pH范围为 7.0～ 8.0 ,且与酶反应底物对甲苯磺酰-L -精氨酸甲酯 (TAME)的反应无明显的最适应反应温度 .荧光光谱的研究结果表明 :该酶的酪氨酸残基的荧光被色氨酸残基的荧光所掩盖 ;同步荧光光谱结果表明 :当发射波长与激发波长差Δλ分别为 2 0nm和 75nm时 ,精氨酸酯酶 1的荧光光谱分别由酪氨酸 (Tyr)和色氨酸 (Trp)残基所贡献 ,且处于亲水性环境中 ;精氨酸酯酶 1的荧光发射强度受溶液酸度变化的影响 .I- ,Acr和NBS对精氨酸酯酶 1的荧光淬灭结果表明这种酶中含有多个色氨酸残基 ,且处于不同的微环境中。

Effect of crosslinking distribution on gas permeability and permselectivity of crosslinked polyimides

Crosslinking modification of polyimide, prepared from 3,3'4,4'-benzophenone tetracarboxyl dianhydride (BTDA) and 2,3,5,6-tetramethyl-1,4-diphenylenediamine (4MPDA), was performed by two methods, putting the polyimide in ambient environment for 4 months, and under UV irradiation for 2 or 8 h. The gas permeation properties of the crosslinked polyimides were investigated. The crosslinked polyimides induced by UV irradiation, in which crosslinking occurs in the surface layer, are of much higher gas permselectivity of hydrogen to nitrogen than that induced by the ambient environment, in which crosslinking takes place in the whole matrix, but their gas permeabilities for hydrogen are similar. (C) 1999 Elsevier Science Ltd. All rights reserved.