An eigenfunction expansion-variational method in prediction of the transverse thermal conductivity of fiber reinforced composites considering interfacial characteristics

An eigenfunction expansion-variational method based on a unit cell is developed to deal with the steady-state heat conduction problem of doubly-periodic fiber reinforced composites with interfacial thermal contact resistance or coating. The numerical results show a rapid convergence of the present method. The present solution provides a unified first-order approximation formula of the effective thermal conductivity for different interfacial characteristics and fiber distributions. A comparison with the present high-order results, available experimental data and micromechanical estimations demonstrates that the first-order approximation formula is a good engineering closed-form formula. An engineering equivalent parameter reflecting the overall influence of the thermal conductivities of the matrix and fibers and the interfacial characteristic on the effective thermal conductivity, is found. The equivalent parameter can greatly simplify the complicated relation of the effective thermal conductivity to the internal structure of a composite. (c) 2010 Elsevier Ltd. All rights reserved.

Critical Biot's number for Determination of the Sensitivity of Spherical Ceramics to Thermal Shock

A critical Biot number, which determines both the sensitivity of spherical ceramics to quenching and the durations of the temperature-wave propagation and the thermal stresses in the ceramics subjected to thermal shock, is theoretically obtained. The results prove that once the Biot number of a ceramic sphere is greater than the critical number, its thermal shock failure will be such a rapid process that the failure only occurs in the initial regime of heat conduction, whereas the thermal shock failure of the ceramic sphere is uncertain in the course of heat conduction. The presented results provide a guide to the selection of the ceramics applied in the thermostructural engineering with thermal shock.

Universal Biot number determining stress duration and susceptibility of ceramic cylinders to quenching

A universal Biot number, which not only describes the susceptibility of ceramic cylinders to quenching but also determines the duration that ceramic cylinders are subjected to thermal stress during thermal shock, is theoretically obtained. The analysis proves that thermal shock failure of ceramic cylinders with a Biot number greater than the critical value is a rapid process, which only occurs in the initial heat conduction regime. The results provide a guide to the selection of ceramic materials for thermostructural engineering, with particular reference to thermal shock.

Estimation of Transverse Thermal Conductivity of Doubly-periodic Fiber Reinforced Composites

For steady-state heat conduction a new variational functional for a unit cell of composites with periodic microstructures is constructed by considering the quasi-periodicity of the temperature field and in the periodicity of the heat flux fields. Then by combining with the eigenfunction expansion of complex potential which satisfies the fiber-matrix interface conditions, an eigenfunction expansion-variational method (EEVM) based on a unit cell is developed. The effective transverse thermal conductivities of doubly-periodic fiber reinforced composites are calculated, and the first-order approximation formula for the square and hexagonal arrays is presented,which is convenient for engineering application. The numerical results show a good convergency of the presented method, even through the fiber volume fraction is relatively high. Comparisons with the existing analytical and experimental results are made to demonstrate the accuracy and validity of the first-order approximation formula for the hexagonal array.

Direct Numerical Simulation of Shock/Turbulent Boundary Layer Interaction in a Supersonic Compression Ramp

A direct numerical simulation of the shock/turbulent boundary layer interaction flow in a supersonic 24-degree compression ramp is conducted with the free stream Mach number 2.9. The blow-and-suction disturbance in the upstream wall boundary is used to trigger the transition. Both the mean wall pressure and the velocity profiles agree with those of the experimental data, which validates the simulation. The turbulent kinetic energy budget in the separation region is analyzed. Results show that the turbulent production term increases fast in the separation region, while the turbulent dissipation term reaches its peak in the near-wall region. The turbulent transport term contributes to the balance of the turbulent conduction and turbulent dissipation. Based on the analysis of instantaneous pressure in the downstream region of the mean shock and that in the separation bubble, the authors suggest that the low frequency oscillation of the shock is not caused by the upstream turbulent disturbance, but rather the instability of separation bubble.

Ignition of single coal particle in a hot furnace under normal- and micro-gravity condition

An experimental study on ignition and combustion of single particles was conducted at normal gravity (1-g) and microgravity (l-g) for three high volatile coals with initial diameter of 1.5 and 2.0 mm, respectively. The non-intrusive twin-color pyrometry method was used to retrieve the surface temperature of the coal particle through processing the images taken by a color CCD camera. At the same time, a mathematical model considering thermal conduction inside the coal particle was developed to simulate the ignition process. Both experiments and modeling found that ignition occurred homogeneously at the beginning and then heterogeneously for the testing coal particles burning at l-g. Experimental results confirmed that ignition temperature decreased with increasing volatile content and increasing particle size. However, contradicted to previous studies, this study found that for a given coal with certain particle size, ignition temperature was about 50–80 K lower at l-g than that at 1-g. The model predictions agreed well with the l-g experimental data on ignition temperature. The criterion that the temperature gradient in the space away from the particle surface equaled to zero was validated to determine the commence of homogeneous ignition. Thermal conduction inside the particle could have a noticeable effect for determining the ignition temperature. With the consideration of thermal conduction, the critical size for the phase transient from homogeneous to heterogeneous is about 700 lm at ambient temperature 1500 K and oxygen concentration 0.23. 2009 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Thermally induced evolution of phase transformations in gas hydrate sediment

Thermally induced evolution of phase transformations is a basic physical-chemical process in the dissociation of gas hydrate in sediment (GHS). Heat transfer leads to the weakening of the bed soil and the simultaneous establishment of a time varying stress field accompanied by seepage of fluids and deformation of the soil. As a consequence, ground failure could occur causing engineering damage or/and environmental disaster. This paper presents a simplified analysis of the thermal process by assuming that thermal conduction can be decoupled from the flow and deformation process. It is further assumed that phase transformations take place instantaneously. Analytical and numerical results are given for several examples of simplified geometry. Experiments using Tetra-hydro-furan hydrate sediments were carried out in our laboratory to check the theory. By comparison, the theoretical, numerical and experimental results on the evolution of dissociation fronts and temperature in the sediment are found to be in good agreement.

青杨(Populus cathayana Rehd)雌雄植株对锈病和干旱胁迫的生理响应及差异蛋白质组比较

雌雄异株植物对环境的不同响应一直是一个有趣而新颖的研究领域，由于雌雄个体不同的繁殖成本及不同的生存策略，使得雌雄植株在生长、存活、生殖格局、空间分布、资源配置等方面已经表现出明显的不同，在生理和分子水平上也表现出明显的性别间差异。干旱是制约农林业发展的环境因子之一，叶锈病是对杨树危害最严重的病害之一，由于长期进化的结果，不同性别的植物必然对生物和非生物胁迫有着不同的响应。本文以雌雄异株的青杨为模式植物，研究雌雄间在生理、生化、亚细胞结构和蛋白质水平上对生物和非生物胁迫的差异响应。主要研究结果如下： （1） 青杨雌雄植株对锈病胁迫的生理生化差异响应 在正常的对照组中，雄株叶片比雌株叶片有着较高的活性氧自由基产生速率、较高的SOD、POD、PPO 和较低的CAT 活性；在锈病感染的早期阶段， SOD、POD、CAT 活性、活性氧自由基产生速率、H2O2 含量、膜脂过氧化程度和细胞膜的电渗率在雌雄株中都增加，而PPO 仅在雄株中增加明显，APX 仅在雌株中增加明显，并且雌株比雄株有着更严重的锈病感染程度、细胞膜的伤害程度和光合系统II 的破坏程度，雌株有更多的净光合速率、气孔导度和叶绿素a 含量的降低，在同工酶变化上，雌雄间对锈病也显示出不同的表达模式。结果显示，雄株比雌株对锈病有着更好的抗性和更有效的ROS 清除系统。 （2） 青杨雌雄植株对干旱胁迫的生理生化及亚细胞结构的差异响应 与较好水分条件相比，干旱下雄株比雌株有着更高的A-Ci 响应参数，如Rubisco 最大羧化速率、光呼吸速率、暗呼吸速率和最大电子传递速率等。干旱显著地增加了膜脂过氧化程度和游离脯氨酸含量，并且雄株比雌株表现出较低的膜脂过氧化程度，较高的总蛋白和游离脯氨酸含量。无论是中度干旱还是极度干旱，除了CAT 外，雄株比雌株表现为较强的抗氧化酶活性，在同工酶谱带上，雌雄间表现出不同的变化模式，并且有些条带是干旱影响应的，而有些条带是性别特异性的，这些性别特异性条带能够作为鉴定性别快速而准确的标记。干旱显著地影响了线粒体、叶绿体和细胞壁的结构，尤其在中度干旱胁迫下，雄株线粒体和叶绿体比雌株呈现出较好的完整性，并且雄株细胞壁要比雌株更厚。因此， 雄株比雌株表现出更强的干旱忍耐性和更高效的抗氧化酶系统。 （3） 青杨雌雄植株对干旱胁迫的蛋白质组差异响应 用双相电泳检测到雌雄间近1000 个蛋白点，通过对比发现对照组雌雄间有54 个差异蛋白点，干旱下雌雄间有108 个差异点，其中102 个被质谱成功鉴定。对照组雌雄间的差异蛋白主要集中在与光合作用相关蛋白、抗氧化酶、胁迫防御蛋白和一些调节基因表达的蛋白；干旱胁迫下雌雄间差异蛋白明显增多，主要有参与信号转导、调节基因表达、蛋白质加工、转录产物的转录翻译后修饰的调节性蛋白蛋白和参与氧化还原平衡、抗胁迫、细胞壁合成、光合作用、能量代谢、氨基酸代谢和脂肪酸代谢等的功能性蛋白。干旱下这些蛋白的表达量在雌雄中有的表现出相同的表达模式，如干旱下雌雄株中Rubisco 激活酶、小热激蛋白等表达都增加，而有的表现出相反的表达模式，如Rubisco 大亚基的降解片段、羰酸酯酶等在雄株中表达量上调而在雌株中却是下调。因此，雌雄间在蛋白质水平上对干旱胁迫响应的差异是显著的，也是复杂的。 It is an interesting and novel topic that dioecious plants possess different responses to environmental stress. As for the different productive cost and different survive strategy, different sexual plants have shown obviously morphological, physiological and molecular differences. Drought is one of the most worldwidely important environmental stress factors that limit plant growth and ecosystem productivity. Rust disease is one of the economically important diseases in many trees. As a result of the long evolutionary process, male and female plants should show different responses to abiotic and biotic stress. In this paper, using a dioeious tree of Populus cathayana Rehd as a model, we study the sexual differences to drought and rust disease stress in physiological, biochemical, sub-cellular and proteomics levels. The main results are follows: (1) The sexual differences in physiology and biochemistry of poplar to rust disease In controls, males showed higher production of superoxide radicals, higher activities of SOD, POD, PPO and lower CAT activity. Under rust disease, the activities of antioxidant, the content of ROS and the degree of cellular member destroyed were increased in both sexes, except for PPO in diseased males and APX in diseased females. However, females showed more seriously disease severity and cellular member and PS II destroyed degrees. Net photosynthesis rate, transpiration rate and chlorophyll a content were decreased more in diseased females than in males. There were also some different changes inantioxidant isozymes under rust disease. The results suggested that male poplar possessed a more effectively antioxidant system and were more resistant to rut disease than females. (2) The sexual differences in physiology and biochemistry of poplar to drought stress Under drought stress, there were higher rates of RuBP-saturated CO2 assimilation, dark respiration, photorespiratory release of oxygen, the max electron transportrate in CO2-saturated and carboxylation efficiency in males than in females. And males showed lower TBARS and higher proline content. Except for CAT, the activities of other antioxidants were higher in males than in females. Meanwhile, there were obviously differences in isozyme changes between teo sexes. Drought stress obviously destroyed the integralities of chloroplasts and mitochondria and the sexual differences in sub-cellular level were obviously under the moderate water stress. Male cell walls were more sensitive to drought stress than did female. The results suggested males were more resistant to drought stress. (3) The sexual differences in proteomics of poplar to drought stress By 2-D and MS analysis, we identified 102 different protein spots between males and females. Under control conditions, the different proteins were mainly in photosynthesis related proteins, antioxidants, stress response proteins and some gene expression related proteins. Under drought stress, the different proteins were focused on (i) regulated proteins such as signaling conduction, kinase, HSP, gene expressional regulation and protein modification, (ii) functional proteins such as photosynthesis, energy metabolism, antioxidant, redox, stress response, lipid metabolism and amino acid metabolism. Some protein showed the same expressional pattern, while some showed contrary expressional pattern. Thus, the results suggested that sexual differences in proteomics were significant and complex.

Scaling and the thermal conductivity of the Frenkel-Kontorova model

We have studied the dependence of the thermal conductivity kappa on the strength of the interparticle potential lambda and the strength of the external potential beta in the Frenkel-Kontorova model. We found that the functional relation can be expressed in a scaling form, kappa(proportional to) lambda 3/2/beta(2 center dot). This result is first obtained by nonequilibrium molecular dynamics. It is then confirmed by two analytical methods, the self-consistent phonon theory and the self-consistent stochastic reservoirs method. The thermal conductivity kappa is therefore a decreasing functon of beta and an increasing function of lambda.

Thermal rectifying effect in macroscopic size

We address the problem of the rectifying effect of heat conduction at macroscopic size. A design for a macroscopic thermal rectifier based on the macroscopic thermal conductivity of materials is introduced, and then realizations of the design are shown by numerical simulations and phenomenological estimations.

band Structure calculations on orthorhombic bulk and nanocrystalline SrY2O4

The electronic structure of SrY2O4 is calculated by using a density functional method, and the exchange and correlation have been treated by using a the generalized gradient approximation (GGA) within the scheme due to Perdew, Burke, and Ernzerhof (PBE). SrY2O4 is predicted to be a direct-gap material because the top of the valence band and the bottom of the conduction band are along the same direction at G. The bond length and the bond covalency are also calculated by using a chemical bond method.

Structural characterization, stability and electrical properties of strontium niobate ceramic

The double perovskite oxide Sr2CrNbO6 has a cubic structure according to powder X-ray diffraction. After reducing in CO, Sr2CrNbO6 still exhibited a cubic structure refined by Rietveld technique. The TG analysis indicated that Sr2CrNbO6 loses 0.127 oxygen per formula unit from 400 to 700 degrees C in H-2. The morphology and compositions of this ceramic did not significantly change on reduction

Charge transport in accumulation layers of organic heterojunctions

We studied the charge transport in organic heterojunction films consisting of copper phthalocyanine (CuPc) and copper hexadecafluorophthalocyanine (F16CuPc). The heterojunction effect between CuPc and F16CuPc induced high-density carriers at both sides of heterojunction. The Hall effect was observed at room temperature, which demonstrated the existence of free carriers and their delocalized transport under heterojunction effect. The Hall mobility of 1.2 cm(2)/V s for holes and 2.4 cm(2)/V s for electrons indicated that the transport capability of the heterojunction films is comparable to single crystals. The transport process was further explained by the multiple trap-and-release model according to the temperature dependence of conduction.

Origin of improvement in device performance via the modification role of cesium hydroxide doped tris(8-hydroxyquinoline) aluminum interfacial layer on ITO cathode in inverted bottom-emission organic light-emitting diodes

It has been found that cesium hydroxide (CsOH) doped tris(8-hydroxyquinoline) aluminum (Alq(3)) as an interfacial modification layer on indium-tin-oxide (ITO) is an effective cathode structure in inverted bottom-emission organic light-emitting diodes (IBOLEDs). The efficiency and high temperature stability of IBOLEDs with CsOH:Alq(3) interfacial layer are greatly improved with respect to the IBOLEDs with the case of Cs2CO3:Alq(3). Herein, we have studied the origin of the improvement in efficiency and high temperature stability via the modification role of CsOH:Alq(3) interfacial layer on ITO cathode in IBOLEDs by various characterization methods, including atomic force microscopy (AFM), ultraviolet photoemission spectroscopy (UPS), X-ray photoemission spectroscopy (XPS) and capacitance versus voltage (C-V). The results clearly demonstrate that the CsOH:Alq(3) interfacial modification layer on ITO cathode not only enhances the stability of the cathode interface and electron-transporting layer above it. which are in favor of the improvement in device stability, but also reduces the electron injection barrier and increases the carrier density for current conduction, leading to higher efficiency.