二苯基-15-冠-5加速钠离子和钾离子在微米管支撑的微-水/1,2-二氯乙烷界面上的转移反应

玻璃微米管针尖可用于支撑微米级的水/1,2-二氯乙烷（W/DCE）界面,并用来研究二苯基-15-冠-5（DB15C5）加速钠离子和钾离子转移反应的机理和求算其络合物的稳定常数.在两种极限情况下,即水相中金属离子浓度远大于有机相中DB15C5的浓度（DB15C5扩散控制过程）和有机相中DB15C5的浓度远大于水相中金属离子浓度（金属离子扩散控制过程）,循环伏安研究表明,加速钠离子转移反应均发生1∶1（金属离子:载体）的界面络合转移过程,相应的一级络合常数分别为logβ1=8.97±0.05和logβ1=8.63±0.03.而对于加速钾离子转移反应,当 DB15C5扩散控制时发生的是一个1:2的界面络合转移过程,当钾离子扩散控制时,在电位窗内却观察到两个过程:一个较低电位的1∶2的界面络合转移过程和一个较高电位的1∶1界面络合转移过程.两种极限条件下所求算的钾离子和DB15C5的二级络合常数分别为logβ1=13.64±0.03和logβ2=11.34±0.24.

Synthesis and electrochemical characteristics of lanthanide complexes with 2-nitro-5,10,15,20-tetraphenylporphyrin and acetylacetonate

Four lanthanide complexes with 2-nitro-5,10,15,20-tetraphenylporphyrin and acetylacetonate were prepared and characterized by elemental analyses, LR, UV-Visible,H-1 NMR, XPS and molar conductance. The redox properties of the lutetium complex with 2-nitro-5,10,15,20-tetraphenylporphyrin and acetylacetonate in dichloromethane were studied by cyclic voltammetry.

人体血浆中15种超痕量稀土元素的电感耦合等离子体质谱法测定

本文用电感耦合等离子体质谱法测定了人体血浆中的稀土元素。在优化的条件下 ,以内标法测得的各种纯水溶液的检测限在 0 .7(Eu)～ 5 .4(Gd) ng·L- 1范围内。研究了 K,Na,Ca,Fe等基体元素对稀土测定的影响。以 In为内标元素补偿样品基体效应以及灵敏度飘移。比较了直接稀释、HNO3- H2 O2 消解及 HNO3-HCl O4消解 3种样品处理方法 ,用 1% HNO3直接稀释样品可满足轻稀土元素的定量分析要求 ,方法的定量测定下限≤ 1μg·L- 1。

辐射效应对LDPE/CB复合物电性能的影响

研究了γ射线辐照交联后的低密度聚乙烯 (LDPE) /碳黑 (CB)复合物在不同温度下的导电性能。应用扫描电子显微镜研究了不同剂量对复合体系正温度系数 (PTC)效应以及负温度系数(NTC)效应的影响。结果表明 ,辐射剂量对PTC和NTC效应的影响很大。在 4 0 0kGy时 ,NTC效应基本消除 ,当辐射剂量继续增加时 ,NTC效应又重新出现。

辐照对不相容聚合物共混物相界面粘接的影响

介绍了改善不相容聚合物共混物界面粘接状况的一种崭新方法，应用SEM、TEM技术研究了辐射敏化界面反应对iPP/LDPＥ不相容共混物体系相界面粘接的影响，并结合溶解度参数的方法评估了多官能团单体—三烯丙基异氰酸酯(TAIC)在iPP/LDPE���混物中的分布状况。结果表明，辐射增强界面反应的方法是改善不相容聚合物共混物界面粘结的有效途径。

On morphology and the competition between crystallization and phase separation in polypropylene-polyethylene blends

Blends of polypropylene (PP) and low density polyethylene (LDPE) have been examined for a series of compositions using differential scanning calorimetry and permanganic etching followed by transmission electron microscopy. Thermal analysis of their melting and recrystallization behaviour suggests two possibilities, either that below 15 wt % PP the blends are fully miscible and that PP only crystallizes after LDPE because of compositional changes in the remaining melt, or else that the PP is separated, but in the form of droplets too small to crystallize at normal temperatures. Microscopic examination of the morphology shows that the latter is the case, but that a fraction of the PP is nevertheless dissolved in the LDPE. (C) 1998 Kluwer Academic Publishers.

Deformation process and mechanism of HDPE/LDPE blends

Blends of HDPE in more LDPE, with appropriate heat treatment, produce a dispersion of separate entities of HDPE in a matrix of LDPE. The system offered an especially favourable means of studying the deformation of melt-crystallized lamellae. It has been found that sheaf-like spherulites are transformed under tensile deformation into hourglass shapes i.e. a double cone aligned along the drawing direction with origin in the center of the object. This is a consequence of different modes of deformation according to the relation of an individual lamella to the tensile axis. The work shows that the lamellae have not undergone melting and recrystallization in the deformation process at room temperature.

HDPE/LDPE���混物形变过程中的结构变化及机理

聚合物熔体结晶由于链缠结等因素的影响，其形态结构非常复杂，这给研究结晶聚合物的微观结构，特别是聚合物在拉伸过程中的形态变化带来很大困难．本文将高密度聚乙烯（ＨＤＰＥ）和低密度聚乙烯（ＬＤＰＥ）两种不相容的组分进行共混，使少量ＨＤＰＥ分散在ＬＤＰＥ中，…

LLDPE���VLDPE���LDPE\HDPE共混物拉伸性能的影响

研究了线性低密度聚乙烯（ＬＬＤＰＥ）和极低密度聚乙烯（ＶＬＤＰＥ）对高密度聚乙烯（ＨＤＰＥ）＼低密度聚乙烯（ＬＤＰＥ）共混物拉伸性能的影响。由于ＬＬＤＰＥ或ＶＬＤＰＥ的加入，改善了ＨＤＰＥ与ＬＤＰＥ间的相互作用，提高了ＨＤＰＥ＼ＬＤＰＥ共混物的拉伸性能。

PPA在LLDPE/LDPE���膜加工中的应用

本工作以LLDPE���LDPE���基料，添加氟弹性体加工改性剂DynamarPPA，采用LDPE���出机加工农膜。结果表明，挤出机加工LLDPE���能力大幅度地提高，使共混物中LLDPE���量从原来的40％增加到80％，薄膜的物理机械性质亦有明显改善，而主机电流和挤出量未见变化。在添加无滴剂母料条件下，可加工LLDPE���含量达95％的无滴膜，且该膜的力学性质和光学性质均住。

Synthesis and properties of cerium oxide nanometer powders by pyrolysis of amorphous citrate

CeO2 nanometer powders of different sizes were prepared at low temperature by pyrolysis of amorphous citrate. XRD patterns show that CeO2 is cubic in structure, space group O-h(5)-F-M3M. TEM indicates that the prepared CeO2 is spherical in shape, and the particle size distribution is in narrow range. It was found that calcination temperature is a more important factor affecting the crystallite size of CeO2 than calcining time, the smaller the particle, the bigger the crystal lattice distortion, the worse the crystal growth. Solubility test of CeO2 in nitric acid reveals that the surface activity of CeO2 decreases with the increasing particle sizes. IR spectra analysis shows that the absorption of Ce-O bond is shifted to higher energy with the decrease of CeO2 particle sizes.

PP/LDPE���混体系的辐射效应

研究了在多官能团单体—三烯丙基异氰脲酸酯存在下ＰＰ／ＬＤＰＥ共混体系接受γ－辐射的效果。用溶解度参数和ＴＥＭ技术评估了共混体系的相容性与多官能团单体在共混体系中的分布，并用ＳＥＭ、ＤＳＣ、动态力学等方法对共混体系相容性进行了表征。结果表明，ＰＰ／ＬＤＰＥ是不相容的共混体系，三烯丙基异氰脲酸酯主要分布在共混体系的相界面区域，辐照强化了共混体系的相间结合，增加了界面厚度，改善了共混体系的相容性。

LLDPE/LDPE���膜加工改性剂PPA

以LLDPE/LDPE���混树脂为基料,添加加工改性剂氟弹性体PPA,采用挤出吹塑成型加工薄膜制品。以LLDPE/LDPE���量比为1/2作空白样。按每克试样总量中含500μg PPA的比例添加PPA,当共混物中LLDPE���量为1/3时,挤出机电流下降,薄膜的透光率增加,雾度降低;LLDPE���量为60％时,挤出机电流未变而产量提高,薄膜的透光率和雾度变化不大;继续增加LLDPE���例时,挤出机电流和雾度增加。薄膜的拉伸性能随LLDPE���例增大显著提高,且纵横向的取向度变小。