Metal dependent control of cis-/trans-1,4 regioselectivity in 1,3-butadiene polymerization catalyzed by transition metal complexes supported by 2,6-bis[1-(iminophenyl)ethyl]pyridine

Fe(III), Cr(III), Fe(II), Co(II) and Ni(II) chloride complexes supported by 2,6-bis[1-(iminophenyl)ethyl]pyridine have been synthesized and characterized along with single crystal X-ray diffraction. These complexes, in combination with MAO, have been examined in butadiene polymerization. The catalytic activity and regioselectivity are strongly controlled by metal center and cocatalyst (MAO/Co ratio dependent in the case of Co(II) complex). The activity decreases in the order of Fe(III) > Co(II) > Cr(III) approximate to Ni (II) complexes, in consistent with the space around the metal center. Polybutadiene with different microstructure content, from high trans-1,4 units (88-95% for iron(III) and Cr(III)), medium trans-1,4 and cis-1,4 units (55% and 35%, respectively, for iron(II)) to high cis-1,4 units 79% for Co(II) and 97% for Ni(II) call be easily achieved by varying of the metal center.

Blue amplified spontaneous emission from 2, 1, 3-benzothiadiazole attached polyfluorene semiconductor polymer with high photoluminescence efficiency

The amplified spontaneous emission properties of a 2, 1, 3-benzothiadiazole attached polyfluorene semiconductor polymer were studied. The conjugated polymer shows a high photoluminescence quantum efficiency of 67% and emits a narrowed blue emissive spectrum with a full width at half-maximum of 3.6 nm when optically pumped, indicating better lasing action. A threshold energy as low as 0.22 mJ pulse(-1) cm(-2), a net gain of 40.54 cm(-1) and a loss of 7.8 cm(-1) were obtained, demonstrating that this conjugated polymer could be a promising candidate as the gain medium for the fabrication of blue polymer lasers.

1-烯丙基-3-甲基咪唑离子液体单体与丙烯腈共聚行为的研究

以1-烯丙基-3-甲基咪唑盐酸盐([AMIM]Cl)作为离子液体单体,偶氮二异丁腈作为引发剂,二甲基亚砜为溶剂,实现了与丙烯腈(AN)在不同反应条件下的自由基共聚合.研究了AN/[AMIM]Cl二元共聚合的动力学,得到了相应的竞聚率数据(rAN=8.11,r[AMIM]Cl=0).用1H-NMR、GPC、DSC、TGA等手段对共聚物进行了表征.通过对AN/[AMIM]Cl二元共聚及AN/IA/[AMIM]Cl三元共聚的研究发现,[AMIM]Cl在与丙烯腈共聚时具有双重作用,一部分离子单体进入到共聚物的分子链中调节其亲水性及可纺性,剩下的大部分留在纺丝液中可显著降低纺丝液的黏度,从而使高分子量高固含量纺丝液的纺制成为可能,有望得到高性能的碳纤维原丝.

Polymerization of 1,3-butadiene with VO(P-204)(2) and VO(P-507)(2) activated by alkylaluminum

The oxovanadium phosphonates (VO(P-204)(2) and VO(P-507)(2)) activated by various alkylaluminums (AlR3, R = Et, i-Bu, n-Oct; HAIR(2), R = Et, i-Bu) were examined in butadiene (Bd) polymerization. Both VO(P-204)(2) and VO(P-507)(2) showed higher activity than those of classical vanadium-based catalysts (e.g. VOCl3, V(acac)(3)). Among the examined catalysts, the VO(P-204)(2)/Al(Oct)(3) system (I) revealed the highest catalytic activity, giving the poly(Bd) bearing M-n of 3.76 x 10(4) g/mol, and M-w/M-n ratio of 2.9, when the [Al]/[V] molar ratio was 4.0 at 40 degrees C. The polymerization rate for I is of the first order with respect to the concentration of monomer. High thermal stability of I was found, since a fairly good catalytic activity was achieved even at 70 degrees C (polymer yield > 33%); the M-n value and M-w/M-n, ratio were independent of polymerization temperature in the range of 40-70 degrees C. By IR and DSC, the poly(Bd)s obtained had high 1,2-unit content (> 65%) with atactic configuration. The 1,2-unit content of the polymers obtained by I was nearly unchanged, regardless of variation of reaction conditions, i.e. [Al]/[V], ageing time, and reaction temperature, indicating the high stability of stereospecificity of the active sites.

Novel, highly efficient blue-emitting heteroleptic iridium(III) complexes based on fluorinated 1,3,4-oxadiazole: tuning to blue by dithiolate ancillary ligands

Novel blue-emitting phosphorescent iridium(III) complexes with fluorinated 1,3,4-oxadiazole derivatives as cyclometalated ligands and dithiolates as ancillary ligands have been synthesized and fully characterized; highly efficient OLEDs have been achieved using these complexes in the light-blue to blueemitting region.

Supramolecular architectures, photophysics, and electroluminescence of 1,3,4-oxadiazole-based iridium(III) complexes: From mu-dichloro bridged dimer to mononuclear complexes

One mu-dichloro bridged diiridium complex and three mononuclear iridium(III) complexes based on the 1,3,4-oxadiazole derivatives as cyclometalated ligands and acetylacetonate (acac) or dithiolates O,O'-diethyldithiophosphate (Et(2)dtp) or N,N'-diethyldithiocarbamate (Et(2)dtc) as ancillary ligands have been synthesized and systematically studied by X-ray diffraction analysis. The results reveal that three mononuclear complexes all adopt distorted octahedral coordination geometry around the iridium center by two chelating ligands with cis-C-C and trans-N-N dispositions, which have the same coordination mode as the diiridium dimer. The dinuclear complex crystallizes in the monoclinic system and space group C2/c, whereas three mononuclear iridium complexes are all triclinic system and space group P(1) over bar. In the stacking structure of the dimer, one-dimensional tape-like chains along the b-axis are formed by hydrogen bondings, which are strengthened by pi stacking interactions between phenyl rings of 1,3,4-oxadiazole ligands. Then these chains assemble a three-dimensional alternating peak and valley fused wave-shape structure. In each stacking structure of three mononuclear complexes, two molecules form a dimer by the C-H center dot center dot center dot O hydrogen bondings, and these dimers are connected by pi stacking interactions along the b-axis, constructing a zigzag chain.

2-十八烷基-7,7,8,8-四氰基对苯二醌二甲烷和3,3',5,5'-四甲基连苯胺电荷转移配合物Langmuir-Blodgett膜的制备及光谱研究

本文利用Langmuir-Blodgett技术制备2-十八烷基-7,7,8,8-四氰基对苯二醌二甲烷和3,3',5,5'-四甲基连苯胺电荷转移配合物超薄膜.并利用红外光谱和紫外-可见-近红外光谱研究其分子取向及结构.

成核剂1,3:2,4-二(亚苄基)-D山梨醇对PET/PEN共混体系结构和结晶形态影响

利用差示扫描量热仪、X射线衍射仪、正交偏光显微镜研究了成核剂 1,3 :2 ,4-二 (亚苄基 ) -D山梨醇(DBS)对聚对苯二甲酸乙二醇酯 (PET) /聚 2 ,6-萘二甲酸乙二醇酯 (PEN)共混体系的结构及结晶形态的影响。结果表明 :成核剂的加入 ,使PET/PEN共混体系熔融起始温度升高 10℃左右 ,结晶峰形变尖锐 ,说明加入成核剂后有效促进了PET/PEN共混体系的结晶。实验结果表明 :成核剂含量低于 1%时 ,PET/PEN共混体系晶体的球晶完整。成核剂含量大于 3 %时 ,PET/PEN /DBS共混体系晶体的球晶碎小。成核剂的加入 ,能够有效地减小球晶尺寸和降低球晶的完善性

聚对苯二甲酸1,3-丙二醇酯溶液浇铸薄膜形态结构

聚对苯二甲酸 1 ,3-丙二醇酯 ( PTT)是典型的半结晶聚合物 ,从熔体结晶形成球晶 ,在某一结晶温度范围内 ,在球晶中可观察到环带结构[1～ 4 ] .一般认为 ,环带球晶的形成归因于片晶沿球晶径向的周期性扭曲[1,2 ] .本文研究了 PTT溶液浇铸薄膜在溶剂挥发过程中等温结晶的形态结构 .1　实验部分　　 PTT样品为美国壳牌化学公司产品 ,熔点为 2 2 8℃ .将 PTT粒料于 1 1 0℃溶解在苯酚和1 ,1 ,2 ,2 -四氯乙烷 (质量比为 60∶ 40 )的混合溶剂中 ,配成质量分数为 0 .2 %～ 2 %的溶液 ,滴少许溶液在加热的云母片上 ,在预先设定的结晶温度 ( 90～ 2 0 0℃ )下等温结晶 ,然后将 PTT薄膜快速冷却至室温 .用 Leica DMLP偏光显微镜 ( PL M)和 SPA- HV30 0原子力显微镜 ( AFM)进行形态表征 .2　结果与讨论　　图 1为 PTT溶液浇铸薄膜在不同温度下等温结晶后的 PLM图 ,可以清楚地看到 Maltese十字消光现象 .PTT溶液浇铸薄膜在 90～ 1 30℃的结晶温度范围内 ,形成环带球晶 ;当结晶温度为 1 40℃...

White electrolumineseence from a single-polymer system with simultaneous two-color emission: Polyfluorene as the blue host and a 2,1,3-benzothiadiazole derivative as the orange dopant on the main chain

New single-polymer electroluminescent systems containing two individual emission species - polyfluorenes as a blue host and 2,1,3-benzothiadiazole derivative units as an orange dopant on the main chain - have been designed and synthesized. The resulting single polymers are found to have highly efficient white electroluminescence with simultaneous blue(lambda(max) = 421 nm/445 nm) and orange emission (lambda(max) = 564 nm)from the corresponding emitting species. The influence of the photoluminescence (PL) efficiencies of both the blue and orange species on the electroluminescence (EL) efficiencies of white polymer light-emitting diodes (PLEDs) based on the single-polymer systems has been investigated. The introduction of the highly efficient 4,7-bis(4-(N-phenyl-N-(4-methylphenyl)amino)phenyl)-2,1,3-benzothiadiazole unit to the main chain of polyfluorene provides significant improvement in EL efficiency. For a single-layer device fabricated in air (indium tin oxide/poly(3,4-ethylenedioxythiophene): poly(styrene sulfonic acid/polymer/Ca/Al), pure-white electroluminescence with Commission Internationale de l'Eclairage (CIE) coordinates of (0.35,0.32), maximum brightness of 12 300 cd m(-2), luminance efficiency of 7.30 cd A(-1), and power efficiency of 3.34 lm W-1 can be obtained.

一种用高效液相色谱分析1,3-二氨基硫脲的方法

一种用高效液相色谱分析１，３－二氨基硫脲的方法，选取Ｚｏｒｂａｘ－ＯＤＳ为色谱柱担体，用甲醇和水配制成移动相，在高效液相色谱仪上用紫外多波长检测器进行检测，以色谱外标法进行定量。本发明具有产品分析仪器化；分析结果误差小；分析过程快速，方便易操作；不仅可以检测１，３－二氨基硫脲产品的纯度，还可用于检测含有微量１，３－二氨基硫脲的溶液及废液中１，３－二氨基硫脲的含量的优点。

Geometries and electronic properties of Ta-n, TanO and TaOn (n=1-3) clusters

Geometries, vibrational frequencies, electron affinities, ionization potentials and dissociation energies of the title clusters in both neutral and positively and negatively charged states were studied by use of density functional theory. For both neutral and charged species, different initial isomers were studied in order to determine the structure with the lowest energy. Vibrational analysis was also performed in order to characterize these isomers. For Ta-2, Ta-Ta metallic bond is strengthened by adding or removing an electron, i.e. the charged species are much more stable than the neutral counterpart. For Ta-3, equilateral triangle with D-3h symmetry has the lowest energy for both neutral and charged species (near equilateral triangle for cation). TaO and its charged species have much larger dissociation energy compared with other tantalum oxides. For Ta2O and TaO2. structure with C-2v symmetry is much more stable than linear chains. For Ta3O, planar structure with doubly bridging oxygen atoms of C-2v, symmetry is the global minimum for both neutral and charged species. While for TaO3, three-dimensional structures are favored for both neutral (C-1 symmetry) and charged species (C-3v symmetry).

2-十八烷基-7,7,8,8-四氰基对醌二甲烷和3,3′,5,5′-四甲基联苯胺电荷转移配合物LB膜的制备和表征

利用LB技术制备了2-十八烷基-7,7,8,8-四氰基对醌二甲烷(C18TCNQ)和3,3,′5,5′-四甲基联苯胺(TMB)的电荷转移配合物(CT comp lex)薄膜,即TMB.C18TCNQ LB膜.利用红外(IR)光谱、紫外-可见-近红外(UV-V is-NIR)光谱以及原子力显微镜(AFM)研究了TMB.C18TCNQ在LB膜中的分子取向、结构及表面形貌.结果表明,配合物为混合堆积类型,LB膜中电子给体TMB和电子受体C18TCNQ的环面分别垂直于固体基板表面,而且给体和受体以面对面的方式堆积.5层TMB.C18TCNQ LB膜的AFM照片显示,其表面形貌是由许多堆积在一起的六边形片状微晶组成的,微晶的宽度约为180 nm.与通过LB技术和掺杂技术制备的TMB.C18TCNQ掺杂膜比较,TMB.C18TCNQ LB膜具有明显不同的结构,其长的脂肪烃链有向垂直于基板表面方向变化的趋势,LB膜与掺杂膜的表面形貌也有明显不同.这表明不同的制备方法可以影响薄膜的结构和形貌.