ULTRASTRUCTURE OF LIQUID-CRYSTALLINE POLYACRYLATES CONTAINING P-NITRO AZOBENZENE

The phase behaviour ai the side chain liquid crystalline polyacrylates containing p-nitro azobenzene was studied bg DSC, WAXD and the polarized optical microscopy. It was shown that nematic phase can be formed for homopolymer HP6, no LC phase can be observed for HF3 and HP4; whereas smectic S-Ad phase can be obtained tor P-n when n was equal to 3,4, 6,8. The unique phase behaviour of the copolymers P-n was due to the existence of H bond between -COOH and -NO2 which lias been confirmed by FTIR. The molecular arrangement of the copolymers in their LC states was proposed from the results of WAXD and FTIR.

IN-SITU COMPOSITE - PHENOLPHTHALEIN POLYETHERSULFONE-THERMOTROPIC LIQUID-CRYSTALLINE POLYMER BLENDS

Phase behavior, thermal, theological and mechanical properties plus morphology have been studied for a binary polymer blend. The blend is phenolphthalein polyethersulfone (PES-C) with a thermotropic liquid crystalline polymer (LCP), a condensation copolymer of p-hydroxybenzoic acid with ethylene terephthalate (PHB-PET). It was found that these two polymers form optically isotropic and homogeneous blends by means of a solvent casting method. The homogeneous blends undergo phase separation during heat treatment. However, melt mixed PES-C/PHB-PET blends were heterogeneous based upon DSC and DMA analysis and SEM examination. Addition of LCP in PES-C resulted in a marked reduction of melt viscosity and thus improved processability. Compared to pure PES-C, the charpy impact strength of the blend containing 2.5% LCP increased 2.5 times. Synergistic effects were also observed for the mechanical properties of blends containing < 10% LCP. Particulates, ribbons, and fibrils were found to be the typical morphological units of PHB-PET in the PES-C matrix, which depended upon the concentration of LCP and the processing conditions.

Synthesis and properties of thermotropic liquid crystalline copolyesters containing bis(4-hydroxyphenyl)methanone(V)

A new series of fully aromatic thermotropic liquid crystalline copolyesters were synthesized by thermal polycondensation of p-hydroxybenzoic acid (PHB), terephthalic acid (TPA), resorcinol (RES) and bis (4-hydroxyphenyl) methanone (BHP). The DSC traces of copolyesters exhibited two or three endotherms, the low temperature endotherm(Tm) of which indicated the transition from solid state to anisotropic phase. Observation under polarizing microscope and WAXD measurements suggested that the LC-phase formed immediately above Tm had a nematic character.

Synthesis and properties of thermotropic liquid crystalline copolyesters containing bis(4-hydroxyphenyl)methanone(IV)

A series of thermotropic liquid crystalline copolyesters were synthesized by thermal polycondensation of p-hydroxybenzoic acid, terephthalic acid, bis (4-hydroxyphenyl) methanone and diols. The resulting copolyesters were characterized by WAXD,DSC and PLM. All the copolyesters formed a nematic phase.

STRUCTURE AND CATALYTIC ACTIVITY FOR PROPYLENE OXIDATION OF BI-MO-NB COMPLEX OXIDE CATALYSTS

The structure and catalytic,activity for propylene oxidation of series oxides B2Mo3-3X-Nb2XO12-4X (X=0.00, 0.02, 0.05, 0.10, 0.15, 0.20, 0.25) have been studied by means of XRD, IR, Raman, SEM, ESR and so on. The results showed that in the range of X < 0.

FRACTURE-TOUGHNESS AND MORPHOLOGY OF PHENOLPHTHALEIN POLY(ETHER SULFONE) THERMOTROPIC LIQUID-CRYSTALLINE POLYMER BLENDS

Blends of a new phenolphthalein poly (ether sulfone) (PES-C) and a thermotropic liquid crystalline polymer (LCP) were prepared by melt-blending in a twin-screw extruder. Rheological properties, fracture toughness, K(IC), and morphology of the blends were

Bi－Mo－Nb复合氧化物催化作用机理的ESR和XPS研究

用ＥＳＲ对比研究了掺杂Ｎｂ对α－Ｂｉ２Ｍｏ３Ｏ（１２）催化剂丙烯还原和氧再氧化的影响，并用ＸＰＳ原位Ａｒ＋溅射研究了催化剂的还原与再氧化过程，观察了上述过程中催化剂内金属离子的价态变化和晶格氧的扩散现象。提出了Ｂｉ－Ｍｏ间通过晶格氧扩散所发生的氧化还原作用及模型，探讨了Ｎｂ（５＋）取代Ｍｏ（６＋）产生的氧空位对加速晶格氧扩散所起的作用。

Y_2O_3－Nb_2O_5－B_2O_3：Eu~（3＋）·Bi~（3＋）的燐光体的晶体结构与光谱性质

采用常规固相反应于１２００℃下制备了具有褐钇铌矿结构的Ｙ２Ｏ３·Ｎｂ２Ｏ５·Ｂ２Ｏ３（Ｙ（０．９３）Ｅｕ（０．０７））２Ｏ３·Ｎｂ２Ｏ５·Ｂ２Ｏ３和（Ｙ（０．９１）Ｅｕ（０．０７）Ｂｉ０．０２））２Ｏ３·Ｎｂ２Ｏ５·Ｂ２Ｏ３等光体，研究了它们的发光性质：结果表明，在２６８ｎｍ紫外光激发下，由于ＮｂＯ４基团于４１０ｎｍ处发生１Ｔ→１Ａ１跃迁，致使Ｙ２Ｏ５·Ｎｂ２Ｏ５·Ｂ２Ｏ３呈现更亮的紫外发射。体系中的Ｂ２Ｏ３可降低反应温度，增强ＮｂＯ４和Ｅｕ（３＋）的发光强度。（Ｙ（０．０９１）Ｅｕ（０．０７）Ｂｉ（０．０２））２Ｏ３·Ｎｂ２Ｏ５·Ｂ２Ｏ３燐光体系中所观察到的ＮｂＯ４→Ｅｕ（３＋）和Ｂｉ（３＋）→Ｅｕ（３＋）的能量传递使红光发射明显增强。

Bi-Mo-Nb复台氧化物的结构与对丙烯氧化的催化活性

本文用XRD,IR,Raman,SEM和ESR等方法研究了系列氧化物Bi_2Mo_(3-3x)Nb_(2x)O_(12-4x)(X=0.00,0.02,0.05,0.10,0.15,0.20,0.25)的结构和对丙烯氧化的催化活性,结果表明,在X≤0.25范围内,催化剂基本保持典型的α-Bi_2Mo_3O_(12)结构,少量Nb~(5+)的掺杂,可取代晶格中的Mo~(6+),产生氧空位,无序分布的氧空位的浓度先随X值的增加而增加,当X=0.15时达最大值,催化剂对丙烯氧化的催化活性与这种氧空位的浓度成正比,反应遵循Redox机理.

溶胶－凝胶法合成（Mg，Ca）O－SiO_2∶Eu~（3＋），Bi~（3＋）发

以Ｍｇ（ＮＯ３）２、Ｃａ（ＮＯ３）２、Ｅｕ（ＮＯ３）３、Ｂｉ（ＮＯ３）３、ＬｉＮＯ３和Ｓｉ（ＯＣ２Ｈ５）４为反应物，采用溶胶－凝胶法，在比较低的温度下，首次合成０．７０１ｍｏＩＭｇＯ－０．１７５ｍｏｌＣａＯ－１．２５ｍｏＩＳｉＯ２∶０．０６ｍｏｌＥｕ（３＋），０．００２ｍｏＩＢｉ（３＋）（加入Ｌｉ＋作为电荷补偿剂）发光体。得到了最佳合成条件。研究了由溶胶向凝胶转变和凝胶向发光晶体的转变过程。探讨了发光体在不同激发波长激发下的发光特性以及在激活剂、敏化剂不同掺杂量下的发光行为。讨论了在（Ｍｇ（ａ）Ｏ－ＳｉＯ２基质中Ｂｉ（３＋）对Ｅｕ（３＋）的能量传递和敏化作用。

PHASE-BEHAVIOR IN THERMOTROPIC LIQUID-CRYSTALLINE POLYMER AND POLYARYLETHERSULFONE BLENDS

An experimental study of the phase morphology and miscibility of binary blends of poly-arylethersulfone (PES) and a liquid crystalline polymer (LCP) of p-oxybenzoate and ethylene terephthalate units in a 60/40 molar ratio (PET-60PHB) is described. Blends

MOLECULAR CHARACTERISTICS AND CRYSTALLINE-STRUCTURE OF ETHYLENE-DIMETHYLAMINOETHYL-METHACRYLATE COPOLYMERS

The relationship between molecular and crystalline structural characteristics of the ethylene -dimethylaminoethylmethacrylate copolymers (EDAM) was investigated and related to melt flow index MI and average gross content of DAM comonomer, in comparison with low density polyethylene (LDPE) produced by the common high-pressure radical polymerization process. Although the average molecular weight and its distribution are influenced predominantly by the polymerization conditions, DAM-content seems not to depend significantly on molecular weight according to the GPC-FT/IR measurement. Comonomer sequence distributions were determined quantitatively with the C-13-NMR spectra entirely assigned by DEPT and H-1-C-13 COSY techniques. The result suggests the alternating copolymerization tendency and surprisingly coincides with the simulation out-puts based on the assumption of continuous complete mixing reactor model, using Mayo-Lewis equation and the same Q-e values as previously reported on different types of copolymers such as EVA and St.DAM (VA;vinylacetate, St;styrene). It was confirmed by WAXD and SAXS analyses that the crystallinity X(c) and the thickness of lamellar crystal l(c) decreased with increasing DAM-content, whereas the a-lattice and b-lattice dimensions enlarged. X(c) and l(c) can definitely be correlated to the heats of fusion and crystallization measured by DSC. The average size of spherulites measured with light scattering photometry tends to be enlarged with decreasing molecular weight (increasing MI) and DAM-content.