SOLVENT-EXTRACTION OF TERBIUM(III,IV) PERIODATE COMPLEXES WITH QUATERNARY AMINE

The differences between the solvent extraction of Tb(III) and Tb(IV) periodate complexes with quaternary amine were studied carefully for the first time. The effects of extractant concentration, phase ratio, the pH value of stock solution, salting-out agent, extractant form, diluent, and extraction time were comprehensively investigated. Under optimal conditions the separation factor between Tb(IV) and Tb(III) periodate complexes is over 5.5.

在Ti系钙钛矿型混合氧化物催化剂上的甲烷氧化偶联──焙烧温度的影响

探讨了焙烧温度对钙钛矿型复合氧化物ＬａＴｉ１－ｙＬｉｙＯ３－λ（０≤ｙ＜１）为主要物相的ＬｉＬａ０．５Ｔｉ０．５Ｏ２＋λ催化剂的结构及甲烷氧化偶联反应活性的影响机制，用ＸＲＤ、ＩＲ、ＸＰＳ和ＢＥＴ等方法对催化剂进行表征。结果表明，焙烧温度对催化剂的ＯＣＭ反应活性的影响是双重的。提高焙烧温度有利于Ｌｉ＋进入ＬａＴｉＯ３晶格（或间隙）产生更多数量的氧空位，进而产生更多的活性氧种，有利于ＯＣＭ反应的进行，但过高的焙烧温度又使催化剂的结构（或物相）发生变化，因而使Ｌｉ＋的取代量、比表面积和甲烷转化率均下降。

γ射线辐照嘧啶核苷水溶液的电子自旋共振（ESR）研究

亚硝基特丁烷（２—ｍｅｔｈｙｌ—２—ｎｔｉｒｏｓｏｐｒｏｐａｎｅ，简称ＭＮＲ）为捕集剂，利用自旋捕集技术，对γ射线辐照嘧啶核苷水溶液进行了ＥＳＲ研究，确定了胸苷、尿苷和胞苷可产生的自旋捕集自由基的类别，并讨论了自由基形成的机制。

DETERMINATION OF INITIATION VALUE OF MODE-I INTERLAMINAR FRACTURE-TOUGHNESS OF UNIDIRECTIONAL POLYMER COMPOSITES

The use of interlaminar fracture tests to measure the delamination resistance of unidirectional composite laminates is now widespread. However, because of the frequent occurrence of fiber bridging and multiple cracking during the tests, it leads to artificially high values of delamination resistance, which will not represent the behavior of the laminates. Initiation fracture from the crack starter, on the other hand, does not involve bridging, and should be more representative of the delamination resistance of the composite laminates. Since there is some uncertainty involved in determining the initiation value of delamination resistance in mode I tests in the literature, a power law of the form G(IC) = A.DELTA alpha(b) (where G(IC) is mode I interlaminar fracture toughness and DELTA alpha is delamination growth) is presented in this paper to determine initiation value of mode I interlaminar fracture toughness. It is found that initiation values of the mode I interlaminar fracture toughness, G(IC)(ini), can be defined as the G(IC) value at which 1 mm of delamination from the crack starter has occurred. Examples of initiation values determined by this method are given for both carbon fiber reinforced thermoplastic and thermosetting polymers.

AN INFRARED SPECTROSCOPIC STUDY OF THE STRUCTURAL PHASE-TRANSITION IN THE PEROVSKITE-TYPE LAYER COMPOUND [N-C16H33NH3]2COCL4

The solid-solid phase transitions in the perovskite-type layer compound [n- C16H33NH3]2CoCl4 have been studied by infrared spectroscopy. A new phase transition at 340 K was found by comparison with differential scanning calorimetry results. A temperature dependence study of the infrared spectra provides evidence of the occurrence of structural phase transitions related to the dynamics of the alkylammonium ions and hydrogen bonds. The main transition at 374 K corresponds to the conformational order-disorder change in the chain, which probably couples with reorientational motions of the NH3 polar heads. GTG or GTG' defects appear in the high temperature disordered phase.

AN EFFECTIVE TRIPHASIC CATALYTIC-SYSTEM FOR OXIDATION OF BENZYL ALCOHOL UNDER PHASE-TRANSFER CONDITIONS

A tri-phasic catalytic system consisting of aqueous hydrogen peroxide, benzyl alcohol and a solid catalyst such as tungsten trioxide has been proved effective for the oxidation of benzyl alcohol in the presence of cetyl trimethyl aniline bromide (CTMAB). At first, the oxide reacts with CTMAB to form a complex, which can be oxidized by aqueous hydrogen peroxide to form a peroxide which effectively oxidizes benzyl alcohol.

FLOW-INJECTION AMPEROMETRIC DETECTION OF HYDRAZINE BY ELECTROCATALYTIC OXIDATION AT A PRUSSIAN BLUE FILM-MODIFIED ELECTRODE

A Prussian Blue-modified glassy carbon electrode prepared by simple adsorption exhibited excellent electrocatalytic activity in the oxidation of hydrazine in acidic media. A film of the perfluorosulphonic acid polymer Nafion coated on top of the Prussian Blue-modified glassy carbon electrode can improve the mechanical stability of the Prussian Blue layer in the flow stream. Hydrazine was detected by flow-injection analysis at the modified electrode with high sensitivity. The limit of detection was 0.6 ng.

强极性色谱固定相硅膜改性弹性玻璃毛细管柱的研制

本工作研究了强极性OV-275固定液可以直接涂渍在硅膜改性弹性玻璃毛细管上,研制的柱子具有良好的色谱特性。该柱的柱效,惰性以及热稳定性均优于弹性石英毛细管柱。

超微Y_2O_3、CuO和BaCO_3粉末的制备

本文采用固体草酸作沉淀剂,沉淀样品在水蒸汽气氛下焙烧分解,制成超微CuO、Y_2O_3和BaCO_3。用热分解法探讨其在水蒸汽下的分解机理,X射线衍射、红外光谱分析和元素分析对产物组成进行鉴定。通过电镜观察,超微粒子的粒径为:Y_2O_30.01～0.02μm、CuO0.02～0.03μm、BaCO_3～0.1μm。用空气吸附法测定其比表面积分别为146m~2g~(-1)、80m~2g~(-1)、20m~2g~(-1)。

Molecular cloning and characterisation of a pattern recognition protein, lipopolysaccharide and beta-1,3-glucan binding protein (LGBP) from Chinese shrimp Fenneropenaeus chinensis

A pattern recognition protein (PRP), lipopolysaccharide and beta-1,3-glucan binding protein (LGBP) cDNA was cloned from the haemocyte of Chinese shrimp Fenneropenaeus chinensis by the techniques of homology cloning and RACE. Analysis of nucleotide sequence revealed that the full-length cDNA of 1,275 bp has an open reading frame of 1,098 bp encoding a protein of 366 amino acids including a 17 amino acid signal peptide. Sequence comparison of the deduced amino acid sequence of F. chinensis LGBP showed a high identity of 94%, 90%, 87%, 72% and 63% with Penaeus monodon BGBP, Litopenaeus stylirostris LGBP, Marsupenaeu japonicus BGBP, Homarus gammarus BGBP and Pacifastacus leniusculus LGBP, respectively. The calculated molecular mass of the mature protein is 39,857 Da with a deduced pI of 4.39. Two putative integrin binding motifs, RGD (Arg-Gly-Asp) and a potential recognition motif for beta-1,3-linkage of polysaccharides were observed in LGBP sequence. RT-PCR analysis showed that LGBP gene expresses in haemocyte and hepatopancreas only, but not in other tissues. Capillary electrophoresis RT-PCR method was used to quantify the variation of mRNA transcription level during artificial infection with heat-killed Vibrio anguillarum and Staphylococcus aureusin. A significant enhancement of LGBP transcription was appeared at 6 h post-injection in response to bacterial infection. These results have provided useful information to understand the function of LGBP in shrimp.

Production of astaxanthin from Haematococcus in open pond by two-stage growth one-step process

We have developed a two-stage growth one-step process for cultivation of Haematococcus using a self-designed system that mimics an open pond in the natural environment. The characteristics of this process are green vegetative cell growth and cysts transformation and pigment accumulation that proceed spontaneously and successively in one open photobioreactor. Four strains of Haematococcus (H. pluvialis 26; H. pluvialis 30; H. pluvialis 34; H. pluvialis WZ) were cultured in this imitation system for a duration of 12 days. The changes in cell density and medium pH were closely monitored, and the astaxanthin content and yield of the four Haematococcus strains were measured at the end of 12 days of cultivation. Two of the strains, H. pluvialis 26 and H. pluvialis WZ, were selected as strains suitable for mass culture, resulting in the astaxanthin yield of 51.06 and 40.25 mg L-1 which are equivalent to 2.79 and 2.50% of their dry biomass respectively. Based on the laboratory work, 6 batch cultures of H. pluvialis WZ were conducted successfully to produce astaxanthin in two 100 m(2) open race-way pond by two-stage growth one-step process. The astaxanthin content ranged from 1.61 to 2.48 g 100 g(-1) dry wt., with average astaxanthin content of 2.10 g 100 g(-1) dry wt. Compared with the one-stage production of astaxanthin based on continuous culture, the superiority of our process is that it can accumulate much more astaxanthin in red cysts. Compared with two-stage production of astaxanthin, the advantage of our process is that it does not need to divide the production process into two parts using two bioreactors. The presented work demonstrates the feasibility for producing astaxanthin from Haematococcus using a two-stage growth one-step process in open pond, culture systems that have been successfully used for Spirulina and Chlorella mass culture. The future of Haematococcus astaxanthin production has been also discussed. (C) 2009 Elsevier B.V. All rights reserved.

Cloning and characterization of beta-carotene ketolase gene promoter in Haematococcus pluvialis

The unicellular green alga Haematococcus pluvialis accumulates a highly valuable ketocarotenoid, astaxanthin, under various environmental stresses. beta-carotene ketolase (BKT) plays a key role in astaxanthin biosynthesis in H. pluvialis. In this paper, an approximate 700 bp 5'-flanking region of the bkt gene containing a putative promoter was cloned through walking upstream. The results of the sequence analysis showed that this bkt 5'-flanking region might have cis-acting elements such as sterol regulatory element (SRE-1)-like motifs, the C-repeat/dehydration responsive element (DRE) and al-3 proximal element (APE)-like motifs, except for typical TATA and CCAAT boxes. The results of the P-galactosidase assay and the transient expression of lacZ driven by a series of sequential deletions revealed that a minimal promoter-like region might exist from -630 to -408 bp, and the highest promoter activity was observed to span the positions from -630 to -308 bp. The results of the site-directed mutagenesis of a C-repeat/DRE and two APE-like motifs in a promoter-like region (-630 to -308 bp) suggested that two APE-like motifs might be essential for transcriptional control of the bkt gene.

Functional characterization of sll0659 from Synechocystis sp PCC 6803

Synchocystis sp. PCC 6803 lacks a gene for the any known types of lycopene cyclase. Recently, we reported that sll0659 (unknown for its function) from Synechocystis sp. PCC6803 shows similarity in sequence to a lycopene cyclase gene-CruA from Chlorobium tepidum. To test, whether Sll0659 encoded protein serves as lycopene cyclase, in this study, we investigated the carotenoids of the wild types ans mutants, In the sll0659 deleted mutant, there is no blockage at the lycopene cyclization step. Our results demonstrate that sll0659 does not affect lycopene cyclization. However, the ultrastructure of mutants suggests the involvement or necessity of sll0659 in the cell division.

Characteristics of the microzooplankton community in Jiaozhou Bay, Qingdao, China

The species composition and abundance of microzooplankton at 10 marine and five coastal stations (Hongdao, Daguhe, Haibohe, Huangdao and Hangxiao) in the Jiaozhou Bay (Qingdao, China) were studied in 2001. The microzooplankton community was found to be dominated by Tintinnopsis beroidea, Tintinnopsis urnula, Tintinnopsis brevicollis and Cvdonellopsis sp. The average abundance of microzooplankton was highly variable among stations. Specifically, the abundance of microzooplankton was higher at inshore stations and lower in the center of the bay (St. 5), bay mouth (St. 9) and outside the bay (St. 10). The highest average annual densities (346 ind./L) was observed at St. 3, while the lowest (55 ind./L) was at St. 10. Two abundance peaks were recorded in May (324 ind./L) and February (300 ind./L). The distribution of microzooplankton in three sampling layers at the 10 stations was relatively homogenous and the abundance decreased slightly as the water depth increased. At coastal stations, the highest average annual density was recorded at Hongdao Station (677 ind./L), followed by Daguhe Station (616 ind./L), Haibohe Station (400 ind./L), Huangdao Station (275 ind./L) and Hangxiao Station (73 ind./L). Furthermore, a 24-h sampling analysis conducted at Hangxiao Station revealed that the microzooplankton assemblages were characterized by a bimodal diel vertical migration pattern, with the highest densities occurring at dusk (154 ind./L), followed by dawn (146 ind./L), noon (93 ind./L) and midnight (77 ind./L). The density of microzooplankton in the Jiaozhou Bay was in the middle range of the densities of temperate coastal waters worldwide.

Fluorescence Characterization of Dissolved Organic Matter in East China Sea

Sea water samples were collected in the East China Sea in March and April, 2005, and three-dimensional fluorescence of dissolved organic matter was measured by fluorescence excitation-emission matrix spectroscopy. The position, number and intensity of fluorescence peak in the spectra and the relations of the peaks were analyzed to determine the type, distribution and origin of the fluorescence dissolved organic matter. Seven types of fluorescence peaks were detected from the samples. There are protein-like fluorescence peaks B with Ex(max)/Em(max) = 275/300 nm, D with Ex(max)/Em(max) = 225/295-305 nm, T with Ex(max)/Em(max) = 280/345 nm, and S with Ex(max)/Em(max) = 225-240/320-350 nm, two humic-like peaks A with Ex(max)/Em(max) = 250-255/410-455 nm and C 335-345/410-440 ran, and marine humic peak M with Ex(max)/Em(max) = 305 nm/400-420 nm. Peaks B, S and A appeared in all surveyed area. Peaks T and D appeared in the north of the surveyed area. Peaks M and C only appeared in a few stations. In the surface layer, the source of the fluorescence dissolved organic matter might be the fresh water outflow of the Yangtze River, while the fluorescence dissolved organic matter in the middle layer had double sources from the Yangtze River and the phytoplankton. The good correlationships of different fluorescence peaks showed the same source or some relationship between the protein-like and the humic-like fluorescence dissolved organic matter.