Accurate quantum mechanical calculation for the N+OH reaction

Accurate three-dimensional time-dependent quantum wave packet calculations for the N+OH reaction on the (3)A' potential energy surface [Guadagnini, Schatz, and Walch, J. Chem. Phys. 102, 774 (1995)] have been carried out. The calculations show for the first time that the initial state-selected reaction probabilities are dominated by resonance structures, and the lifetime of the resonance is generally in the subpicosecond time scale. The calculated reaction cross sections indicate that they are a decreasing function of the translational energy, which is in agreement qualitatively with the quasiclassical trajectory calculations. The rate constants obtained from the quantum mechanical calculations are consistent with the quasiclassical trajectory results and the experimental measurements. (C) 2003 American Institute of Physics.

Concentration effects of Er3+ ion in YAG : Er laser crystals

Laser crystals of (Y1-xErx)(3)Al5O12, (YAG:Er) have been grown by the Czochralski method and the spectral properties have been studied for different Er3+ concentrations. The effects of various Er3+ concentrations on the structural distortions, luminescence quenching Of F-4(9/2), H-2(11/2), S-4(3/2) and red shift in laser wavelength have been discussed for the YAG:Er laser crystals. By using absorption spectra and Judd-Ofelt theory the experimental oscillator strengths, Omega(lambda), parameters and the excited state integrated absorption cross sections of Er3+ ion are reported and some variation regularities of these parameters have been observed. (C) 2000 Published by Elsevier Science S.A. All rights reserved.

Seismic profiles across the middle Tan-Lu fault zone in Laizhou Bay, Bohai Sea, eastern China

The stratigraphic architecture, structure and Cenozoic tectonic evolution of the Tan-Lu fault zone in Laizhou Bay, eastern China, are analyzed based on interpretations of 31 new 2D seismic lines across Laizhou Bay. Cenozoic strata in the study area are divided into two layers separated by a prominent and widespread unconformity. The upper sedimentary layer is made up of Neogene and Quaternary fluvial and marine sediments, while the lower layer consists of Paleogene lacustrine and fluvial facies. In terms of tectonics, the sediments beneath the unconformity can be divided into four main structural units: the west depression, central uplift, east depression and Ludong uplift. The two branches of the middle Tan-Lu fault zone differ in their geometry and offset: the east branch fault is a steeply dipping S-shaped strike-slip fault that cuts acoustic basement at depths greater than 8 km, whereas the west branch fault is a relatively shallow normal fault. The Tan-Lu fault zone is the key fault in the study area, having controlled its Cenozoic evolution. Based on balanced cross-sections constructed along transverse seismic line 99.8 and longitudinal seismic line 699.0, the Cenozoic evolution of the middle Tan-Lu fault zone is divided into three stages: Paleocene-Eocene transtension, Oligocene-Early Miocene transpression and Middle Miocene to present-day stable subsidence. The reasons for the contrasting tectonic features of the two branch faults and the timing of the change from transtension to transpression are discussed. Crown Copyright (C) 2008 Published by Elsevier Ltd. All rights reserved.

Validation of RADARSAT-2 fully polarimetric SAR measurements of ocean surface waves

C band RADARSAT-2 fully polarimetric (fine quad-polarization mode, HH+VV+HV+VH) synthetic aperture radar (SAR) images are used to validate ocean surface waves measurements using the polarimetric SAR wave retrieval algorithm, without estimating the complex hydrodynamic modulation transfer function, even under large radar incidence angles. The linearly polarized radar backscatter cross sections (RBCS) are first calculated with the copolarization (HH, VV) and cross-polarization (HV, VH) RBCS and the polarization orientation angle. Subsequently, in the azimuth direction, the vertically and linearly polarized RBCS are used to measure the wave slopes. In the range direction, we combine horizontally and vertically polarized RBCS to estimate wave slopes. Taken together, wave slope spectra can be derived using estimated wave slopes in azimuth and range directions. Wave parameters extracted from the resultant wave slope spectra are validated with colocated National Data Buoy Center (NDBC) buoy measurements (wave periods, wavelengths, wave directions, and significant wave heights) and are shown to be in good agreement.

On SAR wind speed ambiguities and related geophysical model functions

Recent investigations show that normalized radar cross sections for C-band microwave sensors decrease under high wind conditions with certain incident angles instead of increase, as is the case for low to moderate wind speeds. This creates the problem of ambiguities in high wind speed retrievals from synthetic aperture radar (SAR). In the present work, four geophysical model functions (GMFs) are studied, namely the high wind C-band model 4 (CMOD4HW), C-band model 5 (CMOD5), the high wind vertical polarized GMF (HWGMF_VV), and the high wind horizontal polarized GMF (HWGMF_HH). Our focus is on model behaviours relative to wind speed ambiguities. We show that, except for CMOD4HW, the other GMFs exhibit the wind speed ambiguity problem. To consider this problem in high wind speed retrievals from SAR, we focus on hurricanes and propose a method to remove the speed ambiguity using the dominant hurricane wind structure.

A new wind vector algorithm for C-band SAR

Ocean wind speed and wind direction are estimated simultaneously using the normalized radar cross sections or' corresponding to two neighboring (25-km) blocks, within a given synthetic aperture radar (SAR) image, having slightly different incidence angles. This method is motivated by the methodology used for scatterometer data. The wind direction ambiguity is removed by using the direction closest to that given by a buoy or some other source of information. We demonstrate this method with 11 EN-VISAT Advanced SAR sensor images of the Gulf of Mexico and coastal waters of the North Atlantic. Estimated wind vectors are compared with wind measurements from buoys and scatterometer data. We show that this method can surpass other methods in some cases, even those with insufficient visible wind-induced streaks in the SAR images, to extract wind vectors.

Joint statistical distribution of two-point sea surface elevations in finite water depth

Based on the second-order random wave solutions of water wave equations in finite water depth, a joint statistical distribution of two-point sea surface elevations is derived by using the characteristic function expansion method. It is found that the joint distribution depends on five parameters. These five parameters can all be determined by the water depth, the relative position of two points and the wave-number spectrum of ocean waves. As an illustrative example, for fully developed wind-generated sea, the parameters that appeared in the joint distribution are calculated for various wind speeds, water depths and relative positions of two points by using the Donelan and Pierson spectrum and the nonlinear effects of sea waves on the joint distribution are studied. (C) 2003 Elsevier B.V. All rights reserved.

Embryology of Swertia (Gentianaceae) relative to taxonomy

The embryological features of three species of Swertia (s.l.) - S. erythrosticta, S. franchetiana, and S. tetraptera were characterized, and the observations were used, together with previously gathered data on other species, to evaluate a recently proposed polyphyly, based on molecular data, of Swertia s.l. Comparisons of species within the genus showed that they have diversified embryologically, and there are significant between-species differences. Notable features that vary between species include the number of cell layers that form the anther locule wall, the construction of the wall of the mature anther, tapetum origin, the cell number in mature pollen grains, the structure of the fused margins of the two carpels, the ovule numbers in placental cross-sections, the shape of the mature embryo sac, the degree of ovule curvature, antipodal variation and the presence of a hypostase, and seed appendages. They share characters that are widely distributed in the tribe Gentianeae, such as a dicotyledonous type of anther wall formation, a glandular tapetum with uninucleate cells, simultaneous cytokinesis following the meiosis of the microsporocytes, tetrahedral microspore tetrads, superior, bicarpellary and unilocular ovaries, unitegmic and tenuinucellar ovules, Polygonum-type megagametophytes, progamous fertilization, nuclear endosperm, and Solanad-type embryogeny. The presence of variation in embryological characters amongst the species of Swertia s.l. strongly supports the view that Swertia s.l. is not a monophyletic group. Frasera is better separated from Swertia s.l. as an independent genus, and is only distantly related to Swertia s. s. judging from the numerous differences in embryology. Swertia tetraptera is very closely related to Halenia, as they show identical embryology. (C) 2007 The Linnean Society of London, Botanical Journal of the Linnean Society, 2007, 155, 383-400.

柴西南区下干柴沟组下段层序地层格架内沉积相展布及有利储集砂体分布研究

Lower member of the lower Ganchaigou Formation in the southwestern of Qaidam Basin is one of the main targeted exploration zones. With the advancement of exploration, the targets are gradually switching into the lithologic reservoirs and it is urgent to gain the more precise research results in distribution of sedimentary facies and sandstones. Guided by the theory of sequence stratigraphy and sedimentology as well as on the basis of many logging data, drillings, seismic data and chemical tests, the paper comprehensively analyzes the sedimentary facies and sandstones in the lower member of lower Ganchaigou Formation in the southern of Chaixi. According to the identification marks of the key interface in sequence stratigraphy, the key interfaces in lower member of lower Ganchaigou Formation in the southwestern of Qaidam Basin are identified as two third-order sequences SQ1、SQ2. By calibrating the synthetic seismogram, the seismic sequence, well drilling and logging sequences are united. Based on the works above, this paper chooses seven primary cross-sections and builds connecting-well stratigraphic correlation of seven main connecting-well sections. Ultimately, the high-resolution sequence stratigraphic frameworks in the lower member of the lower Ganchaigou Formation, which are uniform to logging and seismic data, are figured out. In terms of study on each sequence features, the main style of the base-level cycle overlay which forms the third-order sequence is confirmed. It contains asymmetric “becoming deep upward” style and symmetry style. Researching on the spreading characters of sequence stratigraphy indicates that SQ1 and SQ2 are rather thicker near northwest well Shashen 20 and Shaxin1 while they are quite thiner near Hongcan 1, Yuejin, Qie 4 and Dong8-Wu3, and the thickness of SQ1 is thicker than SQ2.Based on the deep analysis of the marks for depositional facies, it is proposed that the lake facies and braid river deltas facies mainly occurred in study areas. Besides, the sorts of sub-facies and micro-facies model are divided and described. Under the control of high-resolution sequence stratigraphic framework, three source directions from Arlarer Mountain、Qimantage Mountain and Dongchai Mountain are identified by using the features of heavy mineral assemblage and paleogeomorphy. In addition, regularities of distribution sedimentary facies in sequence stratigraphic framework are studied in accordance with research thinking of the "point" (single well) "line" (section) "face" (plane). In the stage of lower member in the lower Ganchaigou Formation in the southwestern of Qaidam Basin, it is at the early phrase of evolution of the lake basin with the gradual outspread and the rise of the lake level. Combined with physical analysis of reservoir sands formed in different sedimentary environment, the paper studies the style of favorable sandstone bodies that are underwater distributary channel of braided rive delta front, coarse sand in mouth bar and the sand body in sand flat of shore-shallow lacustrine facies. Finally, this article comprehensively analyzes the distribution relationship between sedimentary facies and favorable sandstone body and proposes the ideas that sequence SQ1 Yuejin area, well east 8-wu3 area, well qie4-qie1 area and well hongcan2 area are distributed areas of favorable sandstone.

苏里格气田苏6加密井区山1-盒8层段河流沉积体系分析

Sulige gas field is located in Northwest of Yi-Shan Slope of the Ordos Basin. The Shan 1 Member of the Shanxi Formation and He8 Member of the ShiHeZi Formation are not only objective strata of research but also main producing strata of the Sulige Field. From core and wireline log data of 32 wells in well Su6 area of Sulige field, no less than six lithofaice types can be recognised. They are Gm,Sl,Sh,Sm,Sp,Fl,Fm. Box-shaped, bell-shaped, funnel-shaped and line-segment-shaped log are typcial gamma-ray log characters and shapes. The Depositonal system of the Shan1-He8 strata in research area have five bounding-surface hierarchies and was composed of six architectural elements, CH, LS,FF（CH）,SB,LA,GB. The depositional model of Shan 1 was the type of a sandy meandering river with natural levee, abandoned channels and crevasse splay. Channel depth of this model maybe 7-12 m and the fullest-bank flow can reach 14 m high. Based on analysis of depositional causes, a sandy braided river model for the depositional system of He 8 can be erected. It consists of active main channels, active chute channels, sheet-like sand bars, abandoned main channels and abandoned chute channels. Channel depth of this model can be 3-4 m with 9 m of highest flow. Six gamma-ray log cross sections show that the connectivity of sandbodies through Shan 1 Member is lower than He 8. Influenced by occurrence of mudy and silty deposits, vertical connectivity of sandbodies through He 8 is not high.

南海北部大陆边缘盆地热演化史及其与油气关系

This thesis focuses on the present-day thermal field features, evolution and their connections to hydrocarbon generation of the three continental margin basins-the Yinggehai (Yingge Sea), Qiongdongnan(southeast Qiong), and Pear River Mouth basins-in northern South China Sea, based on available data from drillings, loggings, seismic cross-sections, BHTs, thermal indicators (Ro%, inclusion, etc) and geopressure measurements. After studying of present-day distribution of geothermal field and thermal disturbance of fluid in the sedimentary strata, the author discovered that the distribution of gas fields in Yinggehai Basin are closely related to the distribution of anomalously high thermal gradient area, whereas it is not the case for the Pear River Mouse Basin. And detailed processing of the fluid inclusion data indicates that geothermal fluids activated frequently in this area, and they may mainly be derived upward from the overpressure and hydrocarbon-generating beds, 3000-4500 m in depth. Therefore, the abnormal gradients in sedimentary beds were mainly caused by the active geothermal fluids related to hydrocarbon migrating and accumulating in this area. Because of the effect of overpressure retarding on vitrinite reflectance, the thermal indicators for thermal history reconstruction should be assessed before put into use. Although some factors, such as different types of kerogen, heating ratio, activities of thermal fluids and overpressure, may have effects on the vitrinite reflectance, under the circumstance that thermal fluids and overpressure co-exist, overpressure retarding is dominant. And the depth and correction method of overpressure retarding were also determined in this paper. On the basis of reviewing the methods of thermal history studies as well as existing problems, the author believes that the combination of thermal-indicator-inversion and tectono-thermal modeling is an effective method of the thermal history reconstruction for sedimentary basins. Also, a software BaTherMod for modeling thermal history of basins was successfully developed in this work. The Yinggehai Basin has been active since Tertiary, and this was obviously due to its tectonic position-the plate transition zone. Under the background of high thermal flow, long-term quick subsidence and fluid activities were the main reasons that lead to high temperature and overpressure in this basin. The Zhujiangkou Basin, a Tertiary fault-basin within the circum-Pacific tectonic realm, was tectonically controlled by the motion of the Pacific Plate and resembles the other petroliferous basins in eastern China. This basin developed early, and characterized intensive extension in the early stage and weak activity in the later stage of its development. Whereas the Qiongdongnan Basin was in a weak extension early and intensity of extension increased gradually. The relative geographical locations and the extensional histories of three basins ilustrate that the northern continental margin of South China Sea spread from south to north. On the other hand, the Qiongdongnan and Yinggehai Basins may have been controlled by the same tectonic regime since later Tertiary, whereas the Zhujiangkou Basin was not meaningfully influenced. So, the tectono-thermal evolution character of the Qiongdonnan basin should be closely to the other two. It may be concluded that the three basins have been developed within the active continental margin since Tertiary, and the local lithosphere might undergo intensive extension-perhaps two or three times of episodic extension occurred. Extension lead to large tectonoc subsidence and extreme thick Tertiary sediments for hydrocarbon generation in the basins. In response to the periodic extension of the basins, the palaeothermal flow were also periodical. The three basins all have the characteristics of multi-phase thermal evolutions that is good for oil-gas generation. And the overpressure expands the depth range of oil-gas habitat, which is meaningful to petroleum exploration in this region.

准噶尔盆地侏罗系层序格架和油气成藏条件研究

Jurassic is an important hydrocarbon-bearing formation in Junggar Basin. Analyzing in strata sequence stratigraphy and hydrocarbon formation has both theoretical and practical values. First of all, strata sequence stratigraphy of continental facies is a new development and supplement in the theory of stratigraphic geology. Stratum of continental facies, unlike sea facies, has rich sup-plements, rapid facies changes, and was influenced slightly by sea level changes. The structural background and sedimentary environment of the basin in west China are greatly different from those of the basins in east China. So it is important to build the patterns of strata sequence stratigraphy in west China basins. Secondly, it is also of significance to find out all kinds of traps, for the dominant types are structural ones so far. After 50 years exploration, the stratigraphic or litholigic traps have become the main concern. This desertation is mainly focused on establishing the isochronal strtaum frame for Junggar Basin to show the evolvement characters of the basin sediment system and the regionalstuctrue background. By analyzing the conditions and patterns of the regional oil and gas bearing formations with typical cross-sections, we have established the patterns of sedimentary conditions for different reserviors. By authur's study, several fruitful results have been obtained in the following: Strata sequence frame and evolvement characteristics of Jurassic: By studing strata sequence, Jurassic has been divided into 2 second rank strata sequences and 3 third rank strata sequences based on the interface unconformities. Only 2 fourth rank strata sequences were grouped in BaDaoWan group. Also different seismic facies and sediment units have been recognized with the establishment of the of sediment system model. The oil-gas system characteristics in Jurassic: We conclude that hydrocar bon resources have the best oil potential. Potential of coal, carbonaceous and dark mudstone were reduced in turn. In this thesis we have made the evaluation of three hydrocarbon sources and the distribution oil-gas resource, and studied the potentials of hydrocarbon and evolvement for each kind of micro-component of the two main resource rocks. Prediction of paleo-temperature: In Junggar basin the evolvement of paleo-ground temperature can be divided into three stages. From Carboniferous to early Permian grads of ancient ground temperature was 8-5 ℃/100m, 5-3 ℃/100m from later period of Permian to end Trias, 3-2 ℃/100m from Jurassic to early Tertiary. Patterns of Jurassic hydrocarbon-bearing reserviors: There were two kinds of hydrocarbon source of Permian and Jurassic. They form different hydrocarbon - bearing systems. Six fundamental hydrocarbon - bearing trap modeS have been established. Directions for later exploration: There were two kinds of regional belts in Jurassic, One is structural belt caused by Yanshan and Ximalaya process, and the other was the stratum one caused by paleostructural rises.

三维油藏数值模拟正反演算法研究

The dynamic prediction of complex reservoir development is one of the important research contents of dynamic analysis of oil and gas development. With the increase development of time, the permeabilities and porosities of reservoirs and the permeability of block reservoir at its boundaries are dynamically changing. How to track the dynamic change of permeability and porosity and make certain the permeability of block reservoir at its boundary is an important practical problem. To study developing dynamic prediction of complex reservoir, the key problem of research of dynamic prediction of complex reservoir development is realizing inversion of permeability and porosity. To realize the inversion, first of all, the fast forward and inverse method of 3-dimension reservoir simulation must be studied. Although the inversion has been widely applied to exploration and logging, it has not been applied to3-dimension reservoir simulation. Therefore, the study of fast forward and inverse method of 3-dimension reservoir simulation is a cutting-edge problem, takes on important realistic signification and application value. In this dissertation, 2-dimension and 3-dimension fluid equations in porous media are discretized by finite difference, obtaining finite difference equations to meet the inner boundary conditions by Peaceman's equations, giving successive over relaxation iteration of 3-dimension fluid equations in porous media and the dimensional analysis. Several equation-solving methods are compared in common use, analyzing its convergence and convergence rate. The alternating direction implicit procedure of 2-dimension has been turned into successive over relaxation iteration of alternating direction implicit procedure of 3-dimension fluid equations in porous media, which possesses the virtues of fast computing speed, needing small memory of computer, good adaptability for heterogeneous media and fast convergence rate. The geological model of channel-sandy reservoir has been generated with the help of stochastic simulation technique, whose cross sections of channel-sandy reservoir are parabolic shapes. This method makes the hard data commendably meet, very suit for geological modeling of containing complex boundary surface reservoir. To verify reliability of the method, theoretical solution and numerical solution are compared by simplifying model of 3-dimension fluid equations in porous media, whose results show that the only difference of the two pressure curves is that the numerical solution is lower than theoretical at the wellbore in the same space. It proves that using finite difference to solve fluid equations in porous media is reliable. As numerical examples of 3-dimension heterogeneous reservoir of the single-well and multi-well, the pressure distributions have been computed respectively, which show the pressure distributions there are clearly difference as difference of the permeabilities is greater than one order of magnitude, otherwise there are no clearly difference. As application, the pressure distribution of the channel-sandy reservoir have been computed, which indicates that the space distribution of pressure strongly relies on the direction of permeability, and is sensitive for space distributions of permeability. In this dissertation, the Peaceman's equations have been modified into solving vertical well problem and horizontal well problem simultaneously. In porous media, a 3D layer reservoir in which contain vertical wells and horizontal wells has been calculated with iteration. For channel-sandy reservoir in which there are also vertical wells and horizontal wells, a 3D transient heterogeneous fluid equation has been discretized. As an example, the space distribution of pressure has been calculated with iteration. The results of examples are accord with the fact, which shows the modification of Peaceman's equation is correct. The problem has been solved in the space where there are vertical and horizontal wells. In the dissertation, the nonuniform grid permeability integration equation upscaling method, the nonuniform grid 2D flow rate upscaling method and the nonuniform grid 3D flow rate upscaling method have been studied respectively. In those methods, they enhance computing speed greatly, but the computing speed of 3D flow rate upscaling method is faster than that of 2D flow rate upscaling method, and the precision of 3D flow rate upscaling method is better than that of 2D flow rate upscaling method. The results also show that the solutions of upscaling method are very approximating to that of fine grid blocks. In this paper, 4 methods of fast adaptive nonuniform grid upscaling method of 3D fluid equations in porous media have been put forward, and applied to calculate 3D heterogeneous reservoir and channel-sandy reservoir, whose computing results show that the solutions of nonuniform adaptive upscaling method of 3D heterogeneous fluid equations in porous media are very approximating to that of fine grid blocks in the regions the permeability or porosity being abnormity and very approximating to that of coarsen grid blocks in the other region, however, the computing speed of adaptive upscaling method is 100 times faster than that of fine grid block method. The formula of sensitivity coefficients are derived from initial boundary value problems of fluid equations in porous media by Green's reciprocity principle. The sensitivity coefficients of wellbore pressure to permeability parameters are given by Peaceman's equation and calculated by means of numerical calculation method of 3D transient anisotropic fluid equation in porous media and verified by direct method. The computing results are in excellent agreement with those obtained by the direct method, which shows feasibility of the method. In the dissertation, the calculating examples are also given for 3D reservoir, channel-sandy reservoir and 3D multi-well reservoir, whose numerical results indicate: around the well hole, the value of the sensitivity coefficients of permeability is very large, the value of the sensitivity coefficients of porosity is very large too, but the sensitivity coefficients of porosity is much less than the sensitivity coefficients of permeability, so that the effect of the sensitivity coefficients of permeability for inversion of reservoir parameters is much greater than that of the sensitivity coefficients of porosity. Because computing the sensitivity coefficients needs to call twice the program of reservoir simulation in one iteration, realizing inversion of reservoir parameters must be sustained by the fast forward method. Using the sensitivity coefficients of permeability and porosity, conditioned on observed valley erosion thickness in wells (hard data), the inversion of the permeabilities and porosities in the homogeneous reservoir, homogeneous reservoir only along the certain direction and block reservoir are implemented by Gauss-Newton method or conjugate gradient method respectively. The results of our examples are very approximating to the real data of permeability and porosity, but the convergence rate of conjugate gradient method is much faster than that of Gauss-Newton method.

辽河盆地东部凹陷热历史及其与油气关系

This dissertation focuses on the basin geothermal history, tectonothermal evolution and the relationship between geothermal field evolution and hydrocarbon generation. Based on the research of present-day geothermal field, geothermal history of Eastern Subdepression of Liaohe Basin was reconstructed with available data from drillings, loggings, seismic cross-sections, BHTs and thermal indicators. 12 heat flow density values were calculated. Ranging from 45.7 mW/m~2 to 70.0 mW/m~2, the mean value of these determinations exhibits 58.0(±5.83mW/m~22). The heat flow density in the uplift and ramp is greater than that in the sag. The main factors affecting the heat flow density are the morphostructure of basement and thickness of sedimentary cover. The Subdepression experienced a much higher heat flow period from 43 Ma to about 25 Ma. The heat flow increased gradually from Sha3 stage to Dongying stage, and reached the peak at the late of Dongying stage, then cooled down. Structural subsidence analysis shows that the subsidence of Eastern Subdepression can be divided into two phases: earlier (25-43Ma) initial (rift) and late (since 25Ma) thermal subsidence. The lower present-day heat flow and the higher palaeo-heat flow corresponding to structural subsidence stage as well as the typical rift subsidence style in Eastern Subdepression provide with some insights to the tectonic-thermal evolution of the basin. The source rocks of Sha3 member began to generate oil in the Shal stage, and entered oil-window at the late of Dongying stage. The source rocks of Shal began to generate oil at the late of Dongying stage, and being at the stage of lower maturation-maturation now. Most of Dongying source rocks are not mature now. The late of Dongying stage is the critical time for the oil system.

环渤海地区地壳和上地幔地震层析成像研究

In Circum-Bohai region (112°~124°E, 34°~42°N ), there exists rich gas-petroleum while inner-plate seismic activity is robust. Although the tectonic structure of this region is very complicated, plenty of geological, geophysical and geochemical researches have been carried out.In this paper, guided by the ideas of "One, Two, Three and Many" and "The depth controls the shallow, the regional constrains the local", I fully take advantage of previous results so as to establish a general image of this region. After collecting the arrival-time of P-wave phases of local events and tele-seismic events recorded by the stations within this region from 1966 to 2004, I process all these data and build an initial model. Then, a tomography image of crust and upper-mantle of this region is obtained. With reference to previous results, we compare the image of various depths and five cross-profiles traverse this region along different direction. And finally, a discussion and conclusion is made.The principle contents is listed as below: 1) in the first chapter, the purpose and meaning of this thesis, the advance in seismic tomography, and the research contents and blue-print is stated; 2) in the second chapter, I introduce the regional geological setting of Circum-Bohai region, describe the tectonic and evolutionary characteristics of principle tectonic units, including Bohai Bay Basin, Yanshan Fold Zone, Taihangshan Uplifted Zone, Jiao-Niao Uplifted Zone and Luxi Uplifted Zone, and primary deep faults; 3) In the third chapter, the previous geophysical researches, i.e., gravity and geomagnetic characters, geothermal flow, seismic activity, physical character of rocks, deep seismic sounding, and previous seismic tomography, are discussed; 4) in the fourth chapter, the fundamental theory and approach of seismic tomography is introduced; 5) in the fifth chapter, the technology and approaches used in this thesis, including collecting and pre-processing of data, the establishment of initial velocity model and relocation of all events; 6) in the sixth chapter, I discuss and analyze the tomography image of various depth and five cross-sections; 7)in the seventh chapter, I make a conclusion of the results, state the existing problems and possible solutions.