四逆汤煎煮过程中乌头类生物碱的溶出和水解平衡

目的　研究四逆汤中乌头类生物碱的溶出平衡和水解平衡。方法　利用电喷雾质谱分析 ,比较了制附子、四逆汤、四逆汤药渣和含有 3种双酯型生物碱的混合对照品体系中的乌头碱类二萜生物碱。结果　在煎煮过程中双酯型生物碱溶解并发生水解反应 ,而脂类生物碱则难溶于水。乌头碱、中乌头碱、次乌头碱水溶性相近 ,但是次乌头碱在水中的热稳定性更高 ,C1 9二萜骨架上 C3取代基 ( - OH或 - H)的变化影响生物碱的稳定性。结论　四逆汤中的乌头碱类生物碱的种类及含量由其溶解性和化学稳定性共同决定。

A novel route for the preparation of CdS nanocrystal-poly(acrylic acid) composites using gamma-radiation

CdS nanocrystals were synthesized through AOT/heptane/H2O reverse micelles. New stable reverse mikelles were obtained by adding an appropriate amount of acrylic. acid monomer, CdS nanocrystal-poly(acrylic acid) composites were synthesized by gamma-radiation with a reverse mi'celle route at room temperature. The US nanocrystals with narrow size distribution were, found to be dispersed homogeneously in the poly(acrylic acid) matrix. (C) 2002 Elsevier Science B.V. All rights reserved.

Phosphors for plasma display panels

Excitation and emission characteristics were reviewed for phosphors which were reported, applied, or suggested for the plasma display panel (PDP). Correlation of luminescence characteristics to the host crystal structure and the activator of the phosphor was explained. Improvements of the PDP phosphor for practicality were considered. (C) 2000 Elsevier Science S.A. All rights reserved.

Investigation of the electrocatalytic effect of polyaniline on the redox reaction of 2,5-dimercapto-1,3,4-thiadiazole by cyclic voltammetry

Electrochemical polymerized polyaniline(PAn) film electrode was used to investigate the electrocatalytic effect of PAn on the electrochemical redox reaction of 2,5-dimercapto-1,3,4-thiadiazole (DMcT), PAn film electrode was electrochemically treated or immersed in DMcT solution before it was scanned in 1.0 mol/L HCl electrolyte. The cyclic voltammograms of PAn film electrode in 1.0 mol/L HCl solution changed with the above treatment, implying the electrocatalytic effect of PAn on the redox reaction of DMcT, The formation of electron-donor-acceptor adducts through the interaction between thiol or disulfide groups of DMcT and amine or imine groups of PAn during the treatment was probably the reason of the catalysis, The electrochemical properties of the adduct were different from those of PAn and DMcT, The adduct possessed a higher electrochemical activity and a better electrochemical reversibility than DMcT or PAn used alone.

聚苯胺对2,5-二巯基-1,3,4-噻二唑氧化还原反应的电化学催化作用的循环伏安研究

研究了聚苯胺 ( PAn)膜电极在 2 ,5-二巯基 -1 ,3 ,4 -噻二唑 ( DMc T)溶液中电化学处理或浸泡后的循环伏安 ( CV)曲线的变化规律 .实验结果表明 ,PAn膜电极在 DMc T溶液中进行电化学处理或浸泡过程可使DMc T进入 PAn膜内部与 PAn形成复合物 .PAn对 DMc T的电化学催化作用可能和二者之间形成的电子给体 -受体复合物有关 .该复合物的电化学氧化还原特性不同于 PAn和 DMc T,其氧化还原反应速率和可逆性均优于 DMc T

Synthesis and characterization of side chain liquid crystal M5MPP/MMEANB copolymers containing NLO active group

A new series of side chain liquid crystal polymers based on the backbone of polymethacrylate containing 4-nitroazobenzene and 4-methoxybiphenyl group as side chain mesogen were prepared and characterized, FTIR, H-1 NMR, POM and WAXD were used to study the structure, phase behavior and mesophase texture of this series of SCLC copolymers. The researches show that polymer PM5MPP and copolymer M5MPP/MMEANB are enantiotropic liquid crystalline polymers, but polymer PMMEANB has no liquid crystalline properties. DSC results showed that the thermal stability of the mesophase of this series of copolymers was enhanced by the existence of intermolecular electron donor-acceptor interaction. It was found that the temperature range of the mesophase of the copolymers was broadened with increasing 4-nitroazobenzene units. The focal-conic texture observed by POM indicated that this series of the copolymers possessed the characteristics of smectic liquid crystal.

新型侧链液晶M5MPP/MMEANB高聚物的合成与表征

以 4,4’ 二羟基联苯、4 硝基苯胺、二溴己烷、甲基丙烯酸、氯代乙醇为原料合成了单体甲基丙烯酸[5 (4’ 甲氧基联苯 4 氧基 )戊基 ]酯 (M 5MPP)、4 硝基偶氮苯基甲基 2 甲基丙烯酸酯基乙胺 (MMEANB) ,并完成了单体的聚合和共聚 ,得到了含有非线性光学活性基团 (NLO)的侧链液晶高分子 ,对其结构进行了表征 .结果表明 ,均聚物PM 5MPP及共聚物 (M 5MPP/MMEANB)属双向液晶高分子 ;PMMEANB属于非晶性高分子 .证实了分子间吸电子与给电子基团相互作用有利于提高液晶高分子热稳定性 ,共聚物 (M 5MPP/MMEANB)具有较宽的液晶相温度范围 .

助熔剂对发光体BaAl_(12)O_(19):Mn结构及发光的影响

在几种不同的助熔剂的作用下合成了BaAl12O19：Mn发光体，XRD谱显示助熔剂不仅有利于基质的结晶成核，而且对基质的不同晶面的生长也有影响.其UV光谱表明不同的助熔剂对其发光的影响不一样，H3Bo3不利于其发光，AIF3对其发光的提高不大，BaF2则可以较大地增加其发光强度．其VUV光谱显示在150nm附近有较强的激发证实了其可成为用于PDP的荧光粉之一．

Fabrication and fluorescence study of sensitizing dye TiO2 films

Fluorescence spectra of the sensitizing dye/TiO2 bilayer films were studied. Charge-transfer complexes were formed in the above bilayer.

Soluble and colorless polyimides from alicyclic diamines

A series of novel polyimides was synthesized from alicyclic diamines and various aromatic dianhydrides by one-step polymerization in m-cresol without a catalyst. The polymerization was conducted for 4 hours with refluxing, which was enough to obtain the polymers with high molecular weight. The inherent viscosities of the resulting polyimides were in the range of 0.30 similar to 1.29 dL/g. The prepared polyimides showed excellent thermal stabilities and good solubility. All the polymers were readily soluble in common organic solvents such as chloroform, tetrachloroethane (TCE), dimethylacetamide (DMAc), etc and the glass transition temperatures were observed at 199 to 311 degrees C. UV-visible spectra were obtained to measure the transparency of polymer films. All the polymers showed high transmission above 90% in the wavelength of 400 similar to 700 nm.

The synthesis and thermotropic liquid crystalline behaviour of novel main chain poly(aryl ether ketone)s containing a lateral phenyl group

Novel main chain poly(aryl ether ketone)s containing a lateral phenyl group were synthesized by nucleophilic substitution reactions of 4,4'-biphenol and phenylhydroquinone with either 4,4'-difluorobenzophenone or 1,4-bis(4-fluorobenzoyl)benzene and their thermotropic liquid crystalline properties were characterized by a variety of experimental techniques. Thermotropic liquid crystalline behaviour was observed in the copolymers containing 50 and 70mol% biphenol. Melting (T-m) and isotropization (T-i) transitions both appeared on the DSC thermograms. A banded texture was formed after shearing the sample in the liquid crystalline nematic state. As expected, each of the copolymers had a relatively lower melting transition than the biphenol-based homopoly(aryl ether ketone)s because of the copolymerization effect of the crystal-disrupting monomer phenylhydroquinone.

An electrochemical study of prussian blue microcrystallines mixed in PEO400 polymer electrolyte by solid-state voltammetry

The electrochemistry of Prussian blue mixed in a polymer medium containing MClO4 (M = Li+, Na+, K+, TBA(+)) as the supporting electrolyte was studied by means of solid-state voltammetry. This approach is new in Prussian blue studies. The behavior of PB in polymer electrolytes is somewhat similar to the well-known behavior for an electrochemically synthesized PB film in aqueous media. Besides, K+, Li+ and Na+ ions can also transport through the crystal of PB because of its zeolitic nature. The transport of TBA(+) ions is possible. Kinetic control lies in the diffusion of cations in and out of the lattice of Prussian blue. Reduction waves of Prussian blue depend on both the size and type of cations. PB is very stable upon electrochemical cycling in polymer electrolytes and air. This system may be used in rechargeable batteries and electrochromic devices.

Developing molecular identification numbers by an all-paths method

A new topological index is devised from an all-paths method. This molecular topological index has highly discriminating power for various kinds of organic compounds such as alkane trees, complex cyclic or polycyclic graphs, and structures containing heteroatoms and thus can be used as a Molecular IDentification number (MID) for chemical documentation. Some published MIDs derived from an all-paths method and their structural selectivity for alkane trees are also reviewed.

Syntheses and reactions of heterometallic complexes of nickel and copper with tetrathiotungstates. The molecular structures of [Ph(4)P](2)[S2W(mu-S)(2)Ni(S-2)] and W(mu-S)(4)Cu-2(PPh(3))(4)center dot py

Reaction of [Ph(4)P]2WS4 With NiCl2 in methanol solution in the presence of NaOCH3 leads to the formation of [Ph(4)P](2) [S2W(mu-S)(2)Ni(S-2)] (I) A Similar reaction between (NH4)(2)WS4 and NiCl2 under O-2 atmosphere in the presence of Ph(4)PCl or (n)Bu(4)NCl affords [Ph(4)P](2)([(S-2)W(O)(mu-S)(2)]Ni-2] (IIa) and [(n)Bu(4)N](2)([(S-2)W(O)(mu-S)(2)]Ni-2} (IIb) Under argon the same reaction gives [Ph(4)P](2)[Ni(WS4)(2)] (IIIa) and [(n)Bu(4)N](2)[Ni(WS4)(2)] (IIIb). [Ph(4)P](2)[Ni(WOS3)(2)] (IV) and [Ph(4)P](2)[Ni(WO2S2)(2)] (V) can be prepared from the reaction of [Ph(4)P]2WOS3 and [Ph(4)P]2WO2S2 with NiCl2. Treatment of (NH4)(2)WS4 with CuCl in the presence of PPh(3) in boiling pyridine produces W(mu-S)(4)Cu-2(PPh(3))(3) (VI), which can further react with excess PPh(3) to give W(mu-S)(4)Cu-2(PPh(3))(4) . py (VII). Complex I crystallizes in the space group P2(1)/n with the cell parameters: a = 20.049(4), b = 17.010(4), c = 14.311(7) Angstrom; beta = 110.24(3)degrees and Z = 4; R = 0.058 for 4267 independent reflections. The structural study confirms that complex I contains two terminal sulfide ligands, two bridging sulfide ligands, a side-on disulfide ligand, and a planar central W(mu-S)(2)Ni four membered ring. Complex VII crystallizes in the space group C2/c with the cell parameters: a = 26.436(8), b = 20.542(6), c = 19.095(8) Angstrom; beta = 125.00(3)degrees and Z = 4; R = 0.080 for 3802 independent reflections. The structural study reveals a perfect linear arrangement of the three metal atoms Cu-W-Cu.