松辽盆地河流-三角洲体系高分辩率层序地层学、储层构形及非均质模型研究

This dissertation tries to combine the new theories of high-resolution sequence stratigraphy and reservoir architecture with fine sedimentology to form a integral theory system -"high-resolution sequence sedimentology", which can be applied widely ranging from the early petroleum exploration to the tertiary recovery stage in marine and terrestrial basin. So the west slope area in south of Songliao basin, in which, early-fine exploration have been developed, and Xingnan area of Daqing placantictine in high water-bearing and tertiary recovery stage, are selected as target areas to research and analyze. By applying high-resolution sequence stratigraphy theory as well as analysis of source area-facies, the west slope area has been divided into two source areas and three drainage systems and the following conclusions have been drawn: three high values sandstone areas, two sandstone pinchout zones and one stratigraphic pinchout overlap; the facies between Baicheng-Tongyu drainage system is frist ascertained as large-scale argillaceous filled plain facies; fine-grained braided channel-delta depositional system has been found; plane sedimentary facies and microfacies maps of different-scale sequence have been completed, and then twenty-eight lithologic traps have been detected in the east of Taobao-Zhenlai reverse fault zone; In no exploration area of the west, large-scale stratigraiphic overlap heavy oil reservoirs has first been found, which has become an important prograss. In Xingnan area, in the view of high-resolution sequence stratigraphy, the surface of unconformity (the bottom of SSC13) in P I group has been identified, and the following method and technique have been advanced: the division and correlation methods of short-scale base-level cycle sequence (SSC); the comprehensive research methods of SSC plane microfacies; the division technique of hierarchy and type of flow unit, the origin of large-scale composite sandbody and flow unit; And ,on the basis of these, 103 monosandstone bodies and 87 flow units of the third levels have been identified, and four levels of flow units model of five sandstone-bodies types have been established. Because it is a very difficult task all over the world to research architecture in subsurface monosandstone body, brings forward a series of techniques as follows: technique of researching architecture of thin interbed in subsurface monosandstone body; classification, type and liquid-resisting mechanism of thin interbed; multiple-remember vertical subsequence model of remaining oil in monosadstone body. Models of heterogeneity and architecture of thin interbed in five types of monosandstone body have been established. Applying these techniques, type and distribution of remaining oil in different types of monosandstone bodies have been predicated.

f-x-y域去除随机噪音方法研究

The seismic survey is the most effective prospecting geophysical method during exploration and development of oil/gas. The structure and the lithology of the geological body become increasingly complex now. So it must assure that the seismic section own upper resolution if we need accurately describe the targets. High signal/noise ratio is the precondition of high-resolution. For the sake of improving signal/noise ratio, we put forward four methods for eliminating random noise on the basis of detailed analysis of the technique for noise elimination using prediction filtering in f-x-y domain. The four methods are put forward for settling different problems, which are in the technique for noise elimination using prediction filtering in f-x-y domain. For weak noise and large filters, the response of the noise to the filter is little. For strong noise and short filters, the response of the noise to the filter is important. For the response of the noise, the predicting operators are inaccurate. The inaccurate operators result in incorrect results. So we put forward the method using prediction filtering by inversion in f-x-y domain. The method makes the assumption that the seismic signal comprises predictable proportion and unpredictable proportion. The transcendental information about predicting operator is introduced in the function. The method eliminates the response of the noise to filtering operator, and assures that the filtering operators are accurate. The filtering results are effectively improved by the method. When the dip of the stratum is very complex, we generally divide the data into rectangular patches in order to obtain the predicting operators using prediction filtering in f-x-y domain. These patches usually need to have significant overlap in order to get a good result. The overlap causes that the data is repeatedly used. It effectively increases the size of the data. The computational cost increases with the size of the data. The computational efficiency is depressed. The predicting operators, which are obtained by general prediction filtering in f-x-y domain, can not describe the change of the dip when the dip of the stratum is very complex. It causes that the filtering results are aliased. And each patch is an independent problem. In order to settle these problems, we put forward the method for eliminating noise using space varying prediction filtering in f-x-y domain. The predicting operators accordingly change with space varying in this method. Therefore it eliminates the false event in the result. The transcendental information about predicting operator is introduced into the function. To obtain the predicting operators of each patch is no longer independent problem, but related problem. Thus it avoids that the data is repeatedly used, and improves computational efficiency. The random noise that is eliminated by prediction filtering in f-x-y domain is Gaussian noise. The general method can't effectively eliminate non-Gaussian noise. The prediction filtering method using lp norm (especially p=l) can effectively eliminate non-Gaussian noise in f-x-y domain. The method is described in this paper. Considering the dip of stratum can be accurately obtained, we put forward the method for eliminating noise using prediction filtering under the restriction of the dip in f-x-y domain. The method can effectively increase computational efficiency and improve the result. Through calculating in the theoretic model and applying it to the field data, it is proved that the four methods in this paper can effectively solve these different problems in the general method. Their practicability is very better. And the effect is very obvious.

丘陵油田三间房组储层三维地质模型和砂体预测

This paper is belonging to Chinese Petrochemical Corporation's science and technology project. Although it is difficult, it has important theoretical and practical value. The study was aimed to reveal inhomogeneity of two kinds of reservoirs of fan-shaped delta and braided river by using new theories, new methods and new technology about 3-D model building and reservoir knowledge repository throughout the world, and to build reservoir knowledge repository and 3-D geological model which would predict the type of sand body forming reason and distribution rule in order to improve exploration result in Qiuling oil fields. Multi-discipline theories such as petroleum structure geology, reservoir geology, petroleum geology, sequence geology, logging geology, geomathematics and so on are used as guide. The information of geology, seism, logging and production test is combined. Outcrop area and overlap area are combined. By making full use of computer, stable structure, reservoir geometric shape, spatial distribution and inhomogeneity of bed of interest are investigated, described and characterized. Petroleum pool 3-D static geological model of reservoir knowledge repository was built. Sand body distribution was predicted. It has guided oil development, lowed the investment and improved development benefits. Several results are achieved as follows: (1) Strata framework of Sanjianfang group in Qiuling oil field has been established. (2) Geometric shape, spatial distribution and evolve rule of two different forming reason's reservoir of fan-shaped delta and braided river of Sanjianfang group in Qiuling oil field are discussed. (3) The two kinds of reservoirs have lower pore and permeability and very strong inhomogeneity. (4) Reservoir knowledge repository of two different forming reasons has been built of Sanjianfang group, which includes 5 geological knowledge sublibrary. (5) 3-D geological model of two kinds of forming reason's reservoirs has been built. (6) That same sequence instruction a simulation and probability field were used to predict sand body of Sanjianfang group was put forward. Coincidence rate is high after production test. It shows this method has great popularity value. (7) A set of theories, methods and technologies of knowledge repository of two kinds of reservoir of braided river and fan-shaped delta and 3-D geological model building were finished. (8) A set of theories, methods and technologies of investigating, describing, characterizing and predicting two kinds of oil pool were developed. It gets noticeable economic benefit after exploration. Theory and method about extrusion basin are developed.

流动单元四维模型和剩余油预测以濮城油田为例

This study is aimed to reveal macroscopic and microscopic anisotropism by using new theories, new methods and new technology. In order to reveal the forming mechanism and distribution pattern of remaining oil, flow units 4-dimension model and realistic model was established according the data over 20 years development of the Pucheng Oil field. Based on theories of multi-discipline subject, methods and technologies, by using correspondent 4-D data body and computer, combining quantity and quality study, static and development data, macroscopic and microscopic data, the two different geneses' reservoir, eg., braided delta and lake delta, are studied. The two different geneses' reservoir flow units models were established. Main achievement of this thesis are summarized as following: The standard of parameter optimization, identification and appreciation of two different geneses' reservoir were established. Based on the standard, the reservoir were classed into four flow units class as G,E,F and P. The flow unit static models of two different geneses' reservoir were established, and the relation of geometric shape, space distribution and macroscopic remaining oil was revealed. the flow units microscopic model were established, which tells that the changes of all the microscopic factor in the development. (4) Accordig BP arithmetic method, an adapt arithmetic method were designed, and the reservoir flow units were simulated based on the new method. (5) Reservoir realistic model of flow unit were established. Based on the model the microscopic development is simulated, which reveals the oil and water seepage in the reservoir and the mechanism of the microscopic oil formation. (6) The spatial residual oil distribution patterns were summarized. The remaided oil is mainly in the places as not being affected by the injected water, high part of the structures and the place near the sealed faults. There are 3 kinds and 9 distribution modes of microscopic remaining oil. The forming mechanism and distribution rule were pointed out. The study has developed a set of theories, technology and methods for flow units study, including flow units description, characterization and prediction. The study is also an improvement of the development geology theory in continental fault depression lake basin.

胜坨油田沙二段油藏流场剩余油形成机理和分布模式

By applying multi-discipline theory and methods comprehensively and with full use of computer, the paper deeps into studying changing rule and control factor of fluid field of ES2 Shengtuo oil field during waterflood development, physical and chemical function, and stress. Matrix field, network field, fluid field, stress field and physical chemistry field and fluid model for dynamic function were established. Macroscopic and microscopic genesis mechanics, distribution rule and control factor of remaining oil were revealed. Remaining oil and emulate model were established. Macroscopic and microscopic distribution rule of mover remaining oil were predicted, several results were achieved as following: The distribution of remaining oil was controlled by micro-structure. At the same development stage, remaining oil saturation of the wells located in higher position of micro-structure is higher than the average saturation in the same layer. The water content ratio has same law. It is the enrichment district that the high position of micro-structure controlled by seal faults. The remaining oil distribution was affected by sedimentary micro-facies, micro-structure, fault sealing, reservoir heterogeneity and affusion-oil extraction. On the plane, the zone owning higher saturation of remaining oil is the area that at the edge miacro-facies and sand-body distribution discontinuously; on the section, the content of waterflood of the upper or middle-upper oil layer of positive rhythm and positive comprehensive rhythm is lower, middle and weak waterflood is main, remaining oil is in enrichment relatively. The remaining oil is relative enrichment at the zones of well network of affusion and oil extraction not affected. 4D dynamic model of reservoir of Es2in Shengtuo oil field was established. Macroscopic and microscopic forming mechanics, distribution rule and control factor were revealed. The emulate model of dynamic function of Shengtuo oil field was established, the space distribution of remaining oil were predicted. Reservoir flow field, matrix field, network field, seep field, physical and chemical field, stress field and fluid field models were established. Reservoir flow field character and distribution were revealed. An improvement of the development geology theory in continental fault depression continental basin was brought on.

共反射面元叠加

The seismic survey is the most effective prospecting geophysical method during exploration and development of oil/gas. The structure and the lithology of the geological body become increasingly complex now. So it must assure that the seismic section own upper resolution if we need accurately describe the targets. High signal/noise ratio is the precondition of high-resolution. As one important seismic data processing method, Stacking is an effective means to suppress the records noise. Broadening area of surface stacked is more important to enhance genuine reflection signals and suppressing unwanted energy in the form of coherent and random ambient noise. Common reflection surface stack is a macro-model independent seismic imaging method. Based on the similarity of CRP trace gathers in one coherent zone, CRS stack effectively improves S/N ratio by using more CMP trace gathers to stack. It is regarded as one important method of seismic data processing. Performing CRS stack depends on three attributes. However, the equation of CRS is invalid under condition of great offset. In this thesis, one method based on velocity model in depth domain is put forward. Ray tracing is used to determine the traveltime of CRP in one common reflection surface by the least squares method to regress the equation of CRS. Then we stack in the coherent seismic data set according to the traveltime, and get the zero offset section. In the end of flowchart of implementing CRS stack, one method using the dip angle to enhance the ratio of S/N is used. Application of the method on synthetic examples and field seismic records, the results of this method show an excellent performance of the algorithm both in accuracy and efficiency.

东营凹陷沙三中亚段湖相浊积岩储层特征及油气成藏规律研究

Turbidity sandstone reservoirs have been an important field of hydrocarbon exploration and development in the basins all over the world, as well as in China. Lithologic pools are composed of turbidity sandstones and other sandstones are frequently found in the Jiyang Depression that is a Mesozoic-Cenozoic non-marine oil-bearing basin. The Dongying Sag lies in the sedimentary center of the basin. The subtle traps with turbidity reservoirs are generally difficult to be predicted and described by using current techniques. The studies on turbidity reservoirs plays thus an important theoretical and theoretical practical role in exploration and development in the Jiyang Depression. The attention is, in this thesis, focused on the petrologic properties and oil accumulating behaviors in lake turbidity sedimentary systems in the middle part of the third section of Shahejie Formation in the Dongying Sag, especially in Dongxin area, which lies on the central uplift of the Sag. The paper has disclosed the origin types of turbidity sandstones, distribution pattern and controlling factors of turbidity sandstones, and set up hydrocarbon accumulation patterns of the middle part of the third section of Shahejie Formation in Dongxin, based on nonmarine high resolution sequence stratigraphy, event sedimentology and new theories of hydrocarbon forming. By studying prediction method and technology of turbidity sandstone reservoirs, using precise geological model developing, new techniques of high resolution seismic inversion constrained by logging, the paper has forecast low permeability turbidity sandstone reservoirs and pointed out advantage exploration aims to progressive exploration and development. The paper has obtained mainly many productions and acknowledges as follows: 1.Turbidity sandstone reservoirs of the third section of Shahejie Formationin Dongying Sag are formed in such specifical geological background as rift and extension of basin. The inherited Dongying delta and transgression make up many turbidity distribution areas by overlaying and joining together. The hydrocarbon migrates from depression area to adjacent turbidity sandstone continuously. Accumulation area which is sufficient in oil is formed. 2.The paper has confirmed distinguishable sign of sequence boundary , established stratigraphic framework of Dongying Sag and realized isotime stratigraphic correlation. Es3 of Dongying delta is divided into eleven stages. Among them, the second period of the lower section in Es3, the sixth period of the middle section in Es3, the third period of the upper section in Es3 correspond to eleven sedimentary isotime surface in seismic profile, namely Es3 is classified into eleven Formations. 3.According to such the features of turbidity sandstone as deep in burial, small in area, strong in subtle property, overlaying and joining together and occurring in groups, management through fault and space variations of restriction quantum are realized and the forecast precision of turbidity sandstone by using precise geological model developing, new techniques of high resolution seismic inversion constrained by logging, based on the analysis of all kinds of interwell seismic inversion techniques. 4.According to the features of low permeable turbidity sandstone reservoirs, new method of log interpretation model is put forward. At the same time, distinguish technology of familiar low resistivity oil layer in the turbidity sandstone reservoirs is studied based on petrophysical laboratory work and "four properties" interrelationship between lithological physical Jogging and bearing hydrocarbon properties. Log interpretation model and reservoir index interpretation model of low resistivity oil layer are set up. So the log interpretation precision is improved. 5.The evolution law and its difference of the turbidity sandstone are embodies as follows: the source of sediments come from the south and east of the study area in the middle period of Es3. East source of sediments is pushed from west to east. However, the south source supply of sediments in the early and middle period of Es3 is in full, especially in Es3. subsequently, the supply is decreased gradually. Turbidity fan moves back toward the south and the size of fan is minished accordingly. The characteristic of turbidity sandstone in Dongying Sag is different in different structural positions. Dongxin in the middle-east of the central lift and Niuzhuang Sag He in Dongying delta front and prodelta deep lake subfacies. Although the turbidity sandstone of the two areas root in the Dongying delta sedimentary system, the sand body has different remarkably characteristic. 6.The sedimentary model of the turbiditys in study area have three types as follows: (1) collapse turbidity fan in respect of delta; (2) fault trench turbidity fan; (3) other types of microturbidity sandstone. Middle fan and outer fan, can be found mainly in sublacustrine fan. Middle fan includes braided channel microfacies, central microfacies and braided interchannel microfacies, which is main prospecting oil-bearing subfacies. The middle section of the third section of Shahejie Formation in study area (for example the central lift) can be divided into middle-lower and upper part. The middle-lower part is characteristic of turbidity fan. The upper part is sedimented mainly by delta-collapse fan. 7.The turbidity reservoirs of the middle part of the third section of Shahejie Formation in study area characterize by low maturity both in component and texture, strong in diagenesis and low in permeability. The reservoir can be classified into four types. Type III is the body of reservoir and comprises two types of H a and HI b. M a belongs to middle porosity - low permeability reservoir and distributes in the central lift. Hlb belongs to low porosity - low permeability and distributes in Haojia region. 8.A11 single sand body of lens turbidity reservoir of the middle part of the third section of Shahejie Formation in study area are surrounded by thick dark source rocks. The oil-water system is complex and behaves that every sandstone is single seal unit. The water body is 1/3-1-5 of the sand body. The edge water is not active. The gas exists in the top of reservoir in the form of mixed gas. For far-range turbidity fan with big scale channel, the area and volume of sand body is large and the gap is big in oil packing degree. There are lots of edge water and bottom water, and the latter increases rapidly during the course of development. 9.By exerting the modern hydrocarbon forming theories, the third section of Shahejie Formation in study area belongs to abnormally pressured fluid compartment. The lithological reservoir of the third section of Shahejie Formation is formed in the compartment. The reservoir-formed dynamic system belongs to lower self-source enclosed type. The result and the practice indicate that the form and accumulation of lithological oil reservoirs are controlled by the temperature and pressure of stratum, microfacies, thickness of sand body, fault and reservoir heterogeneity. 10. Based on studies above, the emphases focus on in south and north part of Dongying structure, west Dongxin region and south part Xinzhen structure in the application of production. The practice proves that the turbidity sandstone reservoirs in Ying 11 block and the fault-lithological reservoirs in Xin 133 block have been obtained significant breakthrough. The next target is still sandstone groups of the third section of Shahejie Formation in the bordering areas of Dongxin region for instance Xin 149 area, He 89 area, Ying 8 area etc.

文33块沙二下段油藏动态模型及剩余油预测

By applying synthetically multi-subject theories, methods and technology, such as petroleum geology, sedimentology, seep mechanics, geochemistry, geophysics and so on; and by making full use of computer; combining quantity and quality, macroscopic and microscopic, intensive static and active description, comprehensive studying and physical modeling, 3 dimension and 4 dimension description; the paper took Wen-33 block of Zhongyuan oil field as an example; and studied reservoir macroscopic and microscopic parameter changing rule and evolve mechanics in different water-blood stage. The reservoir dynamic model and remaining-oil distribution mode was established, and several results were achieved as follows: (1) Three types of parameter gaining, optimizing and whole data body of Wen33th reservoir were established. Strata framework, structure framework, reservoir types and distribution of Wen33th reservoir were discussed. Reservoir genesis types, space distribution law and evolve rule of Wen33th reservoir were explained. 4D dynamic model of macroscopic parameter of reservoir flow dynamic geologic function of Wen33th reservoir was established. The macroscopic remaining-oil distribution and control factor was revealed. The models of the microscopic matrix field, pore-throat network field, fluid field, clay mineral field of Wen-33 block were established. The characters, changing rules and controlled factors in different water stage were revealed. The evolve rule and mechanics of petroleum fluid field in Wen-33 block reservoir were revealed. Macroscopic and microscopic remaining oil distribution mode of Wen-33 block were established. Seven types, namely 12 shapes of dynamic model of microscopic remaining oil were discussed, and the distribution of mover remaining oil was predicted. Emulation model: mathematical model and prediction model of Wen-33 block were established. The changing mechanics of reservoir parameter and distribution of remaining-oil were predicted. Firstly, the paper putting forward that the dynamic geologic function of petroleum development is the factor of controlling remaining-oil, which is the main factor leading to matrix field, network field, clay mineral field, fluid field, physic and chemical field, stress field and fluid field forming and evolving. (10) A set of theories, methods and technologies of investigating, describing, characterizing and predicting complex fault-block petroleum were developed.

大港油田孔南地区孔一段储层流动单元研究

The main reservoir type in the south of Dagang Oilfield is alluvial reservoir. In this paper, the reservoir structure model and the distribution of connected body and flow barrier were built on base of the study of high-resolution sequential stratigraphic skeleton and fine sedimentary microfacies on level of single sandbody. Utilizing the static and dynamic data synthetically and carrying out the comparision of the classification method for reservoir flow unit in different reservoir, the criterion, which can be used to classify the flow unit in first section of Kongdian formation of Kongnan area, was defined. The qualitative method of well-to-well correlation and the quantitative method of conditional simulation using multiple data are adopted to disclose the oil and water moving regulation in different flow unit and the distribution rule of remaining oil by physical simulation measure. A set of flow unit study method was formed that is suit for the Dagang Oilfield on account of the remaining oil production according to the flow unit. Several outstanding progresses was obtained in the following aspects:It is considered that the reservoir structure of Zao V iow oil group- Zao Vup4 layerand are jigsaw-puzzled reservoir, while ZaoVup3-ZaoVupi layers are labyrinth reservoir,which are studied on base of high-resolution sequential stratigraphic skeleton on the levelof single sandbody in first section of Kongdian formation of Kongnan area and accordingto the study of fine sedimentary microfacies and fault sealeing.When classifying the flow unit, only permeability is the basic parameter using thestatic and dynamic data and, and also different parameters should be chose or deleted, suchas porosity, effective thickness, fluid viscosity and so on, because of the weak or stronginterlayer heterogeneous and the difference of interlayer crude oil character.The method of building predicting-model of flow unit was proposed. This methodis according to the theories of reservoir sedimentology and high-resolution sequencestratigraphic and adopts the quantitative method of well-to well correlation and the quantitative method of stochastic simulation using integrateddense well data. Finally the 3-D predicting-model of flow unit and the interlay er distribution model in flow unit were built which are for alluvial fan and fan delta fades in first section of Kongdian formation of Kongnan area, and nine genetic model of flow unit of alluvial environment that spread in the space were proposed.(4) Difference of reservoir microscopic pore configuration in various flow units and difference of flow capability and oil displacement effect were demonstrated through the physical experiments such as nuclear magnetic resonance (NMR), constant rate mercury penetration, flow simulation and so on. The distribution of remaining oil in this area was predicted combining the dynamic data and numerical modeling based on the flow unit. Remaining oil production measure was brought up by the clue of flow unit during the medium and late course of the oilfield development.

A practical approach to the degradation of polychlorinated biphenyls in transformer oil

A practical and efficient disposal method for hydrodechlormation of polychlorinated biphenyls (PCBs) in transformer oil is reported. Transformer oil containing PCBs was treated by nanometric sodium hydride (nano-NaH) and transition metal catalysts. High destruction and removal efficiency (89.8%) can be attained by nano-NaH alone under mild conditions. The process exhibits apparent characteristics of a first order reaction. The reductive ability of nano-NaH was enhanced by the addition of transition metal catalysts. In the presence of TiCl4, 99.9% PCBs was hydrodechlorinated. The complex reducing reagents, Ni(OAc)(2) + i-PrONa, show extra hydrodechlorinating activity for di-chlorinated biphenyls. (c) 2004 Elsevier Ltd. All rights reserved.