矾山杂岩体成因及其与磷（铁）矿的成矿关系

The Fanshan complex consists of layered potassic ultramafic-syenite intrusions. The Fanshan apatite (-magnetite) deposit occurs in the Fanshan complex, and is an important style of phosphorus deposit in China. The Fanshan complex consists of three (First- to Third-) Phases of intrusion, and then the dikes. The First-Phase Intrusive contains ten typical layered rocks: clinopyroxenite, biotite clinopyroxenite, coarse-grained biotite clinopyroxenite, pegmatitic orthoclase-biotite clinopyroxenite, variegated orthoclase clinopyroxenite, interstitial orthoclase clinopyroxenite, biotite rock, biotite-apatite rock, biotite rock and magnetite-apatite rock. This layered intrusive consists of nine rhythmic units. Each rhythmic unit essentially comprises a pair of layers: clinopyroxenite at the bottom and biotite clinopyroxenite at the top. The apatite (-magnetite) deposit is situated near the top of rhythmic Unit no. 6 of the First-Phase Intrusive. The Second-Phase Intrusive contains three typical rocks: coarse-grained orthoclase clinopyroxenite, . coarse-grained salite syenite and schorlomite-salite syenite. The Third-Phase Intrusive includes pseudo-trachytic salite syenite, porphyritic augite syenite, fine-grained orthoclase clinopyroxenite and fine-grained salite syenite. The origin of the Fanshan complex is always paid attention to it in China. Because most layered igneous intrusion in the world not only have important deposit in it, but also carry many useful information for studying the formation of the intrusion and the evolvement of magma. Two sketch maps were drawn through orebodies along no. 25 cross-cut on 425 mL and no. 1 cross-cut on 491 mL in the Fanshan mine. Through this mapping, a small-scaled rhythmic layering (called sub-rhythmic layering in the present study) was newly found at the top of the rhythmic Unit no. 6. The concept of sub-rhythmic layering is defined in this article. The sub-rhythmic layering is recognized throughout this apatite-rich part, except for magnetite-apatite rock. Presence of the layered magnetite-apatite rock is one of the characteristics of the Fanshan apatite (-magnetite) deposit. Thus, from this layer downwards six units of sub-rhythmic layering are recognized in the present study. Each unit consists of biotite clinopyroxenite (or biotite rock and biotite-apatite rock) layer at the bottom and apatite rock layer at the top. To study this feature in detail is an important work for understanding the origin of the Fanshan complex and apatite (-magnetite) deposit. The origin of the Fanshan complex and the relation of the formation of the apatite(-magnetite)deposit will be interpreted by the study of sub-rhythmic layering on the basis of previous research works. The magma formed the Fanshan complex was rich in K2O, early crystallized pyroxene, and after this phase more biotite crystallized, but no amphibole appeared. This indicated that the activity of H2O in the magma was low. Major element compositions of biotite and clinopyroxene (on thin sections) in the sub-rhythmic layering were analyzed using electron microprobe analyzer. The analytical results indicate Mg/(Mg+Fe*+Mn) atomic ratios (Fe*, total iron) of these two minerals rhythmically changed in sub-rhythmic layering. The trends of Mg/(Mg+Fe*+Mn) atomic ratio (Fe*, total iron) of biotite and clinopyroxene indicate that the magma evolved markedly from relatively magnesian bottom layer to less magnesian top layer in each sub-rhythmic unit. A general trend through the sub-rhythmic layering sequence is both minerals becoming relatively magnesian upwards. The formation temperatures for sub-rhythmic layering yield values between 600 and 800 ℃, were calculated using the ratio of Mg/(Mg+Fe+Mn) in the salite and biotite assemblage. The equilibrium pressures in the rhythmic layers calculated using the contents of Al in the salite were plotted in the section map, shown a concave curve. This indicates that the magma formed the First-Phase Intrusive crystallized by two vis-a-vis ways, from its bottom and top to its centre, and the magnetite-apatite rock was crytallized in the latest stage. The values of equilibrium pressures in the sub-rhythmic layering were 3.6-6.8(xlO8) Pa with calculated using the contents of Al in the salite. The characteristics of geochemistry in various intrusive rocks and the rocks or apatite of sub-rhythmic layers indicated that the Fanshan complex formed by the comagmatic crystallization. The contents of immiscible elements and REEs of apatite rock at the top of one sub-rhythmic unit are more than biotite clinopyroxenite at the bottom. The contents of immiscible elements and REEs of apatite of biotite clinopyroxenite at the bottom of one sub-rhythmic unit are higher than apatite rock at the top. The curves of rocks (or apatite) in the upper sub-rhythmic units are between two curves of the below sub-rhythmic unit in the primitive mantle-normalized trace element abundance spider diagram and the primitive mantle-normalized REE pattern. The trend for the contents of immiscible elements and REEs inclines to the same contents from the bottom to the top in sub-rhythmic layering. These characteristics of geochemistry of rocks or apatites from sub-rhythmic layering indicate that the latter sub-rhythmic unit was produced by the residual magma after crystallization of the previous sub-rhythmic unit. The characteristics of petrology, petrochemistry, geochemistry in the Fanshan complex and sub-rhythmic layers and the trends of Mg/(Mg+Fe+Mn) atomic ratio of biotite and clinopyroxene in sub-rhytmic layering rejected the hypotheses, such as magma immiscibility, ravitational settling and multiple and pulse supplement of magma. The hypothesis of differentiation by crystallization lacks of evidences of field and excludes by this study. On the base of the trends of formation temperatures and pressures, the characteristics of petrology, petrochemistry, geochemistry for the Fanshan complex and the characteristics of geochemistry for the rocks (or apatites), the trends of Mg/(Mg+Fe+Mn) atomic ratio of biotite and clinopyroxene in sub-rhytmic layering, and the data of oxygen, hydrogen, strontium and neodymium isotopes, this study suggests that the magma formed the Fanshan complex was formed by low degree partial melting of mantle at a low activity of H2O, and went through the differentiation at the depth of mantle, then multiply intruded and crystallized. The rhythmic layers of the First-Phase Intrusive formed by the magma fractional crystallized in two vis-a-vis ways, from the bottom and top to the centre in-situ fractional crystallization. The apatite (-magnetite) deposit of the Fanshan complex occurs in sub-rhythmic layering sequence. The the origin of the sub-rhythmic layering is substantially the origin of the Fanshan apatite (-magnetite) deposit. The magma formed the rhythmic layers of First-Phase Intrusive was rich in H2O, F and P at the later stage of its in-situ fractional crystallization. The Fanshan apatite (-magnetite) deposit was formed by this residual magma in-situ fractional crystallization. The magnetite-apatite rock was crystallized by two vis-a-vis ways at the latest stage in-situ fractional crystallization in the rhythmic layers. The result was light apatite layer below heavy the magnetite-apatite layer, formed an "inversion" phenomenon.

新疆萨吾尔金矿带构造-流体地球化学及成矿作用

The Sawuer gold belt is located in the transition belt between Siberian plate and Kazakhstan-Junggar plate. Based on the geological and geochemical studies on the Kuoerzhenkuola and Buerkesidai gold deposits, in Sawuer gold mineralization belt, the time-space structure of mineralization and mineralizing factor are studied, the metallogenic regularity is concluded in thistheses. The ore bodies have the regularity that orebody are of the extensive and compressive in the sallow and depth of volcanic apparatue, respectively, and the vertical extension of orebody is more intensive than the horizontal extension. The gold deposits were controlled by the fractures of volcanic apparatus and regional faults, and featured by the hydrothermal alteration and metasomatism type disseminated mineralization and filling type vein mineralization. By virtue of the geological and geochemical studies on the two deposits that the formation of the two deposits are significantly related to the volcanic activity, we propose new ideas about their origin: (1) the two deposits are located in the same strata, and share the same genesis. (2) both of two deposits are volcanogenic late-stage hydrothermal gold deposits. Based on mapping of volcanic lithofacies and structure for the first time, it is discovered that a volcanic apparatus existed in the study area. Volcanic-intrusive activity can be divided into three cycles and nine lithofacies. where the two deposits are hosted in the same volcanic cycle, in this case, the wall-rock should belong to the same strata. The 40Ar-39Ar age method is employed in this work to analyze the fluid inclusions of quartz in the ore bodies from Kuoerzhenkuola and Buerkesidai gold deposits. The results show that the main mineralization occurred in 332.05 + 2.02-332.59 + 0.5IMa and 335.53 + 0.32Ma~336.78 + 0.50Ma for Kuoerzhenkuola and Buerkesidai gold deposits respectively, indicating that the two deposits are formed almost at the same time, and the metallogenic epoch of the tow deposits are close to those of the hosting rocks formed by volcanic activity of Sawuer gold belt. This geochronological study supplies new evidence for determining the timing of gold mineralization, the geneses of gold deposits? and identifies that in Hercynian period, the Altai developed tectonic-magmatic-hydrothermal mineralization of Early Carboniferous period, except known two metallogenic mineralization periods including tectonic-magmatic-hydrothermal mineralization of Devonian period and Late Carboniferous-Permian period respectively. The study of fluid inclusions indicates that the ore-forming fluid is a type of NaCl-HbO fluid with medium-low temperature and low salinity, Au is transported by the type of auric-sulfur complex (Au (HS)2-), the ore is formed in reduction condition. Hydrogen and oxygen isotopes of fluid inclusions in the major mineralizating stage show that the solutions mainly originated from magmatic water and meteoric water. The fluid mixing and water-rock reaction cause the deposition of Au. The helium and argon isotope compositions of fluid inclusions hosted in pyrite have been measured from Kuoerzhenkuola and Buerkesidai gold deposits in Sawuer gold belt. The results show that the ore-forming fluids of two deposits possessed the same source and is a mixture of mantle- and partial meteoric water-derived fluid, and the reliability of He and Ar isotopic compositions in Hercynian period is discussed. Isotopic studies including H, O, He, C, S, Pb and Sr reveal the same result that the ore-forming fluids of two deposits possessed the same source: the water derived mainly from magmatic water, partially from meteoric water; the mineralizers and ore materials derived mainly from mantle beneath the island arc, and partially from crust. The ore-forming fluids of two deposits are a mixture of mantle-derived fluids being incorporated by crust-derived fluid, and shallow partial meteoric water. Based on these results, it is proposed that the geneses of the two gold deposits are the same, being volcanogenic late-stage hydrothermal gold deposits that the ore-forming fluids filled in fractures of volcanic apparatus and metasomatized the host rocks in the volcanic apparatus. It is the first time we carried out the geophysical exploration, that is, the EH-4 continuous electrical conductivity image system measurement, the results show that relative large-size mineralizing anomalies in underground have been discovered.lt can confirm the law and genesis of the deposits mentioned above, and change the two abandoned mines to current large-size potenial exploration target.

安多地区早中侏罗世岩浆岩岩石地球化学和同位素年代学研究及其对构造演化的制约

Anduo area is located in the Central Tibet, the middle segment of the Bangonghu-Nujiang suture. Anduo Block is the northern part of Lhasa terrane. The relationships among the different geological bodies were determined during the 1: 250000 regional geological surveying. Petrography, petrologic geochemistry, isotopic geochemistry and geochronology of igneous rocks from the suture and granitoids from Anduo Block were analyzed systematically as a whole for the first time. Then, their tectonic setting and history are discussed.Anduo ophiolitic melange consists of metamorphic peridotites, cumulates, plagiogranites, sheeted dykes swarm, pillow lava and radiolarian cherts. The concentration of Cr and Ni in the metamorphic peridotites is very high, with Mg# about 0.94 ~ 0.97, higher 87Sr/86Sr and Pb isotopic ratios, and lower 143Nd/i44Nd ratio. LREE is enriched relative to HREE and positive Eu anomaly is very clear. The REE distribution curve is U shape. Nb and Ta anomalies from cumulate gabbro and sheeted dyke swarm are not clear, while that are slightly negative from pillow lava. Plagiogranite belongs to strong calc-alkaline series with high Si, middle Al, low Fe, Mg and low K contents. Eu anomaly (~ 1.23) from plagiogranites is slightly positive. The character of all components of ophiolite is similar to that of the MORB, while to some extent the ophiolite was influenced by crustal material. Anduo ophiolite formed in a mature back-arc basin. Additionally, intermediate acidity volcanic rocks within Anduo phiolite melange are island arc calc-alkline rocks related to ocean subduction.The early-middle Jurassic plutonic rocks are tonalite, granodiorite bearing-phenocryst, magaporphyritic hornblende monzogranite, magaporphyritic monzogranite, monzogranite bearing-phenocryst and syenogranite in turn. They belong to calc-alkaline series which developed from middle K to high K series temporally. REE distribution curves of all plutonic rocks are similar and parallel to each other. SREE and negative Eu anomaly values decrease. In the multi-element spider diagram, the curves of different plutons are similar to each other, but troughs of Nb, Sr, P and Ti from young plutons become more evident. This suggests that thereare some closely petrogenetic affinities among plutonic rocks which make up amagma plutonism cycle of the early-middle Jurassic. Magma source is mainly crustal,but abundant mafic microgranular enclaves within granitoids indicate that crastalmagma should be mixed with mantle-derived magma and the mantle-derived magmadecreased subsequently. Tonalite has features of I-type granite, magaporphyriticmonzogranite is transition type, and monzogranite bearing-phenocryst is S-typegranite. The characteristic of granitoids from Anduo Block suggest that the formingtectonic setting is active continental margin.Reliable zircon U-Pb SHRIMP ages are obtained in the study area firstly. Plagiogranite from the Anduo ophiolite of the Bangonghu-Nujiang suture is 175.1 Ma, and granitoids from Anduo Block is 172.6-185.4 Ma. Additionally, plagioclase from the plagiogranite dates a 40Ar/39Ar age of 144 Ma, while biotite and hornblend from granitoids of Anduo Block give a 163-165 Ma.Similar cooling ages of plagiogranite from the Anduo ophiolitic melange and granitoids from Anduo Block and the spatial distribution of the ophiolitic rocks between Anduo, Naqu, and Shainzha area suggest that bilateral subduction of the Bangonghu-Nujiang oceanic basin took place in the early-middle Jurassic. During this subduction, Anduo ophiolitic rocks were related to north subduction of the Bangonghu-Nujiang oceanic basin and Anduo back-arc basin spreading, while granitoids from Anduo Block were related to south subduction.

中国东海陆架盆地构造-热演化研究

East China Sea Shelf Basin (ECSSB), as a basin with prospect of oil & gas resource and due to its special geological location on the west margin of the west Pacific, attracts a lot of attention from many geologists in the world.Based on systematic temperature measurements, bottom hole temperature (BHT) and the oil temperature data, the geothermal gradients in the ECS SB are calculated and vary from 25 to 43°C/km, with a mean of 32.7°C/km. The geothermal gradient in Fuzhou Sag has the higher value(40.6°C/km) in Taibei Depression than that in others. The lower value (27.2 °C/km) occurs in in Xihu Depression. The middle values occurs in Jiaojiang and Lishui sags in Taibei Depression with a mean value of 34.8 °C/km. Incorporated with the measured thermal conductivity, heat flow values show that the ECSSB is characterized by present-day heat flow around 70.6mW/m2, varying between 55 and 88 mW/m2. No significant difference in heat flow is observed between the Xihu and the Taibei Depressions. These heat flow data suggest that the ECSSB is geothermally not a modem back-arc basin.Applying the paleogeothermal gradient based method, thermal history is reconstructed using vitrinite reflectance (VR) and apatite fission track (AFT) data. The results suggest that the thermal history was different in the Taibei and the Xihu depressions. Paleo-heat flow values when the pre-Tertiary formations experienced their maximum temperature at the end of the Paleocene reached a mean of 81 mW/m2 in the Taibei Depression, much higher than the present-day value. The lower Tertiary sediments in the Xihu Depression experienced maximum temperatures at the end of Oligocene and reached a mean paleo-heat flow value of 83.4 mW/m2. The time, when the paleo-heat flow reached the maximum value, suggests that the ECSSB rifted eastward.Tectonic subsidence analysis shows that the timing of the major rifting episode was different across the ECSSB. The rifting occurred from the Late Cretaceous to the early Eocene in the Taibei Depression, followed by thermal subsidence from the late Eocene to the end of Miocene. In contrast, in the Xihu Depression the initial subsidence lasted until the early Miocene and thermal subsidence to the end of Miocene. From Pliocene to the present, an accelerated subsidence took place all along the West Pacific margin of the east Asia.The thermal lithosphere thickness is determined by temperature profile in the lithosphere, the mantle adiabat or the dry basalt solidus. It indicates that the thermal lithosphere reached the thinnest thickness at the end of Eocene in the Taibei Depression and the end of Oligocene in the Xihu Depression, respectively, corresponding with a value of 57-66km and 56-64km. In Taibei Depression, the lithosphere thickness decreased 16-22km from the end of Mesozoic to Paleocene. After Paleocene, the thickness increased 13-16km and reached 71-79 km at present-day. In Xihu Depression, From the end of Oligocene to present-day, the thickness increased 10-13km and reached 69-76km at present-day. The evolution of the lithosphere thickness is associated closely with the lithosphere stretching.Combining the reconstructed thermal history and the burial history, the maturation of the Jurassic oil-source rock shows that the main hydrocarbon generation phase was in the mid-Jurassic and a secondary hydrocarbon generation occurred at the end of Paleocene. The secondary generation was controlled mainly by the tectono-thermal background during the Paleocene.

环渤海地区地壳和上地幔地震层析成像研究

In Circum-Bohai region (112°~124°E, 34°~42°N ), there exists rich gas-petroleum while inner-plate seismic activity is robust. Although the tectonic structure of this region is very complicated, plenty of geological, geophysical and geochemical researches have been carried out.In this paper, guided by the ideas of "One, Two, Three and Many" and "The depth controls the shallow, the regional constrains the local", I fully take advantage of previous results so as to establish a general image of this region. After collecting the arrival-time of P-wave phases of local events and tele-seismic events recorded by the stations within this region from 1966 to 2004, I process all these data and build an initial model. Then, a tomography image of crust and upper-mantle of this region is obtained. With reference to previous results, we compare the image of various depths and five cross-profiles traverse this region along different direction. And finally, a discussion and conclusion is made.The principle contents is listed as below: 1) in the first chapter, the purpose and meaning of this thesis, the advance in seismic tomography, and the research contents and blue-print is stated; 2) in the second chapter, I introduce the regional geological setting of Circum-Bohai region, describe the tectonic and evolutionary characteristics of principle tectonic units, including Bohai Bay Basin, Yanshan Fold Zone, Taihangshan Uplifted Zone, Jiao-Niao Uplifted Zone and Luxi Uplifted Zone, and primary deep faults; 3) In the third chapter, the previous geophysical researches, i.e., gravity and geomagnetic characters, geothermal flow, seismic activity, physical character of rocks, deep seismic sounding, and previous seismic tomography, are discussed; 4) in the fourth chapter, the fundamental theory and approach of seismic tomography is introduced; 5) in the fifth chapter, the technology and approaches used in this thesis, including collecting and pre-processing of data, the establishment of initial velocity model and relocation of all events; 6) in the sixth chapter, I discuss and analyze the tomography image of various depth and five cross-sections; 7)in the seventh chapter, I make a conclusion of the results, state the existing problems and possible solutions.

Isotope geochronology of Dapingzhang spilite-keratophyre formation in Yunnan Province and its geological significance

On the basis of the geological field investigations and isotope geochronological studies the Sm-Nd isochron age (513 Ma?0 Ma), Rb-Sr isochron age (511 Ma? Ma) and K-Ar age (312-317 Ma) of the Dapingzhang spilite-keratophyre formation in Yunnan Province are presented. From these geochronological data it is evidenced that this suite of volcanic rocks was formed in the Cambrian and the parent magma was derived from a depleted mantle, which was influenced by crustal contamination and/or seawater hydrothermal

岩石圈伸展对粤北下庄矿田铀成矿的制约机制研究

地球动力学与成矿关系的研究是地球科学研究的前沿领域，而陆内岩石圈伸展与成矿的关系的研究则是该领域相对比较薄弱的环节。 华南地区于白垩—古近纪发生了岩石圈强烈的伸展减薄事件，且岩石圈伸展减薄与该区同时期形成的众多金属和非金属矿床有密切的成因联系，尤其是华南地区的花岗岩型热液铀矿床，显示了与该区岩石圈伸展作用可能有多方面的成因联系。粤北下庄铀矿田位于位于南岭铀-多金属成矿带的南部，是华南地区典型的花岗岩型热液铀矿区，本次研究在深入细致的野外地质工作的基础上，运用流体包裹体地球化学、元素地球化学、同位素地球化学等方法手段，开展了对下庄铀矿田成矿流体性质、成矿过程中元素的活动规律、成矿流体来源及演化等方面的系统研究，初步探讨了岩石圈伸展对该区铀成矿的制约机制，并建立了可能的矿床成因模式。通过研究，本次工作获得了以下几点主要认识： （1）通过对下庄铀矿田部分铀矿床流体包裹体显微测温、激光拉曼光谱及液相成分分析研究，查明了下庄矿田铀矿床矿前期热液属中高温（200℃~350℃）、低盐度（0.72%~5.95%NaCl）、密度中等（0.703~0.830g/cm3）、活动深度较深（2.29km~5.74km）、富∑CO2、相对还原性质的流体；成矿期热液属中低温（主要为154℃ ~250℃）、低盐度（0~1.83%NaCl）、密度中等（0.628~0.867g/cm3）、活动深度较浅（0.19km~1.62km）、富F-、相对氧化性质的流体。 （2）矿石矿矿物电子探针测试分析及岩、矿石的微量元素地球化学分析研研究表明，本区铀矿床主要的原生铀矿物为沥青铀矿、铀石、钛铀矿，铀矿物的形成与Si、Ca、W等元素有密切的关系，而其它金属元素未显示明显地富集。矿石、脉石矿物部分继承了原岩的稀土元素组成，且在原岩基础上又有高度的演化。 （3）进行了矿区内碳酸盐的C、O同位素和黄铁矿的He、Ar稀有气体同位素的分析研究。研究表明，矿化剂∑CO2主要为幔源，大量的He、Ar等稀有气体也来自于地幔。矿区发育的深大断裂构造可能控制了幔源挥发份的加入。 （4）脉石矿物碳酸盐和萤石的Sr、Nd同位素地球化学研究显示，成矿流体中的这些元素主要源于地壳，南区矿床（338、339）的Sr、Nd组成则为富含壳源Sr、Nd的流体与幔源基性脉岩不同程度的水—岩反应所致。另外，碳酸盐铅同位素研究显示，下庄矿区成矿物质铀可能来自帽峰式后期流体交代的花岗岩体。 （5）岩石圈伸展与下庄矿田铀成矿有关系密切：下庄矿田铀矿床明显受伸展构造控制，伸展构造既为导矿构造，又为储矿构造；岩石圈伸展导致的地温梯度升高，大地热流平均值加大，驱动热液流体的流动，为铀成矿提供了主要的热驱动力；岩石圈伸展产生的深大断裂导通了壳幔间的联系，使幔源脱气成因挥发份（主要为∑CO2）沿断裂上升，加入壳源热水循环系统，从而参与了铀成矿。 （6）初步建立了下庄矿田“岩石圈伸展体系下大陆热水系统铀矿床成因模式”。模式认为，华南地区白垩—古近纪岩石圈伸展作用引发区内热水流体的大规模循环，且伸展引起的幔源脱气作用产生的挥发份（主要为ΣCO2）加入了贫铀、贫矿化剂的循环的地下热水中，形成了富矿化剂热水。富矿化剂热水从富铀花岗岩中浸出铀（氧化作用），变为富矿化剂、富铀热液流体，这种热液流体在伸展引起的热驱动下沿构造上升，热液流体上升到浅部时，由于地球化学障、流体压力释放等因素的影响，U被还原沉淀，并在有利部位富集成矿。

地幔副矿物和硫化物的热（PVT）状态方程研究

矿物PVT状态方程是研究矿物在一定温压条件下的晶胞体积与温度、压力之间的关系，依据这个基本关系，可以了解矿物在高温高压下的密度、弹性、热膨胀等性质。矿物PVT状态方程的研究可以了解矿物在地球深部存在的结构状态，为进一步的理论计算提供基础的数据，其结果也可以与天然和人工地震的地震波反演的结果对比，对地球深部的地质作用过程、物质结构状态和组成进行限制。然而，目前矿物PVT状态方程的研究主要集中在氧化物矿物和上地幔主要矿物（橄榄石和辉石）及其高压相（瓦兹利石、林伍德石、方镁铁矿、Majorite、Mg-Perovskite、Ca-Perovskite）的研究上，对石榴石、尖晶石等地幔常见副矿物和硫化物矿物的PVT状态方程的研究很少。 作者在参与搭建并完善金刚石压腔外加温系统的基础上，利用北京同步辐射X射线衍射实验技术结合金刚石压腔外加温技术对天然铁铝榴石、锰铝榴石、铬尖晶石进行了PVT状态方程的研究，同时对闪锌矿、辰砂、方铅矿、辉钼矿、辉锑矿等硫化物矿物进行了相变及状态方程的研究。结合前人研究成果，讨论了类质同象置换对镁铝－铁铝系列石榴石、锰铝－铁铝系列石榴石、尖晶石和硫化物矿物相变及状态方程的影响。获得了以下研究结果： 1）镁铝－铁铝系列石榴石和锰铝－铁铝系列石榴石的体弹模量都随着铁铝榴石组分的增加而增大。其主要原因是在二价阳离子位置上Fe2+取代了Mg2+、Mn2+。在镁铝－铁铝榴石系列中Mg2+的共价键半径（1.36Å）要大于Fe2+的共价键半径（1.17Å），而Mg2+－O键长（2.270Å）与铁铝榴石中的Fe2+－O（2.299Å）键长基本相当。在锰铝－铁铝榴石系列中， 尽管Mn2+的共价键半径（1.17Å）与铁铝榴石中的Fe2+共价键半径（1.17Å）相等，但是Mn2+－O键长（2.326Å）大于Fe2+－O键长（2.299Å）。较小的键长和共价键半径将会增强离子间的结合力，从而具有较强的抗压缩能力，因此随铁铝榴石组分的增加，镁铝－铁铝榴石系列和锰铝－铁铝榴石系列具有较大的体弹模量。 2）首次获得了铬尖晶石（(Mg0.6766Fe0.2808Na0.0073Ti0.0014)0.9661(Cr1.4874Al0.5367)2.0241O4）的体弹模量的温度导数。结合前人关于其他组分尖晶石的实验结果发现，尖晶石中在四面体位置上发生Fe2+－Mg2+置换对体弹模量的影响要大于在八面体位置上发生Cr3+－Al3+置换对体弹模量的影响。而造成铬尖晶石的体弹模量值比其他组分尖晶石的体弹模量值大的主要原因也是四面体位置上的Fe2+－Mg2+的类质置换。 3）依据获得的尖晶石和石榴石的状态方程计算了不同地幔岩模型（橄榄岩和榴辉岩模型）的密度值在上地幔温压条件下的变化情况。结果表明，在尖晶石二辉橄榄岩模型中尖晶石含量的改变（2％－10％）会引起较大的密度变化（2.2％）；在石榴石二辉橄榄岩（石榴石含量14％－20％）和榴辉岩（石榴石含量37％－45％）模型中石榴石含量的变化几乎未引起其密度值的变化，但石榴石是这两种地幔岩模型中的重要组成矿物。 4）首次获得了辰砂的Cinnabar相、方铅矿的B33相、辉钼矿、辉锑矿体弹模量的温度导数和热膨胀系数。讨论了闪锌矿、辰砂、方铅矿的相变情况。 5）总结了锌的、汞的、铅的硫族化合物发生结构相变的规律。认为造成锌的、汞的、铅的硫族化合物的相变压力随阴离子原子序数的增加（S→Se→Te）而逐渐减小的原因是：元素周期表中相对较大原子序数的原子具有更多的核内电子，引起价电子及导带电子的有效位能相对变弱，引起电离能降低，因此在相对较低的压力下就容易发生结构相变。 6）分析了ZnS中Fe2+替代Zn2+、Sb2S3－Bi2S3、MoS2－WS2以及同族相同结构不同组分的简单硫化物矿物的阴、阳离子对体弹模量值的影响。认为简单硫化物矿物的体弹模量值取决于阴、阳离子的离子半径、电负性以及键长。

福建省基性岩的年代学和地球化学：晚中生代以来中国东南部地幔演化

中国东南部地处太平洋板块与欧亚板块的接合部位，其独特的地理位置和构造运动长期以来引起了地质学家的广泛关注。自印支运动以来，板内构造演化复杂而多样。最引人注目的无疑是燕山期广泛而强烈的构造一岩浆热事件。近年来随着研究的深入，逐渐凸显出两个重要的地质问题需要解决：（1）中国东南部晚中生代构造属性的转变时间及地球动力学演化过程；（2）多金属成矿作用与岩石圈伸展减薄及地壳拉张的关系。基于此，本文以中国东南部福建省的基性脉岩、岩体为研究对象，运用系统的矿物学、岩石学、岩石地球化学、同位素地球化学及同位素年代学证据，详细论述了晚中生代中国东南部板块俯冲、地慢演化、壳幔相互作用及岩石圈伸展减薄的地球动力学过程，探讨了地壳拉张期次在福建省区域构造上的响应。本研究主要获得以下几点认识：1、岱前山辉长岩体沿福建长乐一南澳大断裂带分布，侵位于沿海的绿片岩相和角闪岩相的变质岩中及内陆的中生代火山岩中。岩体的微量元素特征表现为与俯冲作用有关的岛弧特点。岱前山岩体由低程度部分熔融形成（约7％），伴有角闪石、单斜辉石的分离结晶作用和斜长石的堆晶作用。时间上与古太平洋板块低角度一歪斜俯冲、晚中生代的变质事件、平潭一东山变质带抬升和长乐一南澳剪切带运动在时间上基本一致。岩体是受俯冲流体交代的上地慢，经部分熔融沿长乐一南澳断裂一应力转换带侵入。它与中国东南部出露的其它基性岩同源，但未受到地壳的混染作用。2、闽南茅坪一晒鞍角基性侵入体具独特的地球化学属性，表现为高Al2O3、CoO、MnO，低FeOT、MgO、TiO2含量，富集轻稀土元素（LREE）和大离子亲石元素（LILE），并具正的Pb异常和负的Ti异常；Sr-Nd-Pb同位素结果显示，该基性岩有EM2组分的参与。模拟计算表明，该基性岩墙群是尖晶石二辉橄榄岩地慢5-15％部分熔融的产物；微量元素配分模式及理论模拟表明茅坪一晒鞍角基性岩体的地慢源区在熔融前曾受到1％俯冲沉积物熔体的源区混染和5％流体交代作用。基性岩浆在上升过程中还受到10％左右的地壳物质的混染作用，导致该区基性岩富放射成因Sr、Pb同位素。3、福建省晚中生代基性脉岩富Al2O3（14.0-20.4 wt%）、CaO（4.09-12.7wt％）。按地球化学特征可分为两组：第一组脉岩具较低稀土总量（53.8-145.5μg／g）和平缓的稀土配分模式L（La/Yb）n=1.68-4.651，而第二组脉岩的稀土总量较高（63-247μg／g），且轻稀土富集［（La/Yb）n＝4.63-19］。在原始地慢标准化图解上，第一组脉岩显示Pb的正异常和Ti负异常，无Nb、Ta异常，而第二组脉岩显示明显的Nb一Ta一Ti负异常和Pb正异常。两组脉岩经历了不同的源区混合和陆壳混染过程，第一组脉岩显示了以陆壳混染为主的地球化学过程，不具有岛弧特点的微量元素配分模式表明该类基性岩的地慢源区可能未受俯冲作用过程影响，第二组脉岩的岛弧地球化学特点暗示该类基性岩地慢源区是经俯冲作用改造过的富集岩石圈地慢。第一组基性脉岩来源于石榴石一尖晶石二辉橄榄岩地慢，而第二组脉岩来源于尖晶石或尖晶石一斜长石二辉橄榄岩地慢。地球化学数据显示，不同类型的地慢存在不均一性，反映了不同程度的交代作用或不同量俯冲沉积物的加入。福建省晚中生代基性脉岩产生于拉张构造背景，与岩石圈的伸展减薄及软流圈的上涌紧密联系；4、福建省基性脉岩的同位素特征显示，第一组脉岩具较高的143Na／144Nd，第二组脉岩的143Nd／144Nd较低；Th/Nd、Ba/La比值及理论模拟结果表明，第二组脉岩可能受到流体交代和俯冲沉积物的源区混合作用，而第一组脉岩基本未受俯冲组分（沉积物＋流体）的改造。地壳混染对两组脉岩可能起着重要的作用。EC-AFC理论模拟表明，福建省基性脉岩在上升过程中受到前寒武纪变质岩的影响，这种混染作用在一定程度上改变了同位素组成。因此，福建省晚中生代基性脉岩的地球化学特点是太平洋板块俯冲与壳慢相互作用共同作用的结果；5、K-Ar年龄结果表明，出露于福建省的基性脉岩年龄具周期性分布，表现为五个周期：70-75Ma士，85 Ma士，105-110Ma，125Ma士和135-140Ma。这与前人的研究结果基本一致，表明福建省与中国东南部区域上有相似的地壳拉张期次。K-Ar年龄主要集中分布在14OMa→65Ma之间，这表明：①140M。限定了中国东南部岩石圈伸展作用开始的下限，也就是说中国东南部晚中生代的岩石圈伸展至少开始于140Ma左 右，而并非90Ma；②标志着中国东南部大规模拉张作用的开始，表明构造属性由令挤压为主转变为以拉张作用为主。

地幔柱与岩浆成矿-峨嵋山大火成岩省地震波速层物相解释及典型PGE矿床成岩成矿机制研究

地幔柱概念在19世纪60至70年代就被提出，但是由于板块构造理论在解释地球上岩浆活动的分布规律时取得了空前的成功，在当时这一理论是被排斥的。板块边界概念可以解释地球上绝大部分的岩浆产出，但在解释板内岩浆的成因时往往显得力不从心，尽管这些岩浆的体积只占地球岩浆总量的2％。地幔柱理论模型发展到现在得到不同学科的支持。地质学、地球化学、地球物理学、古生物学、比较行星学、实验岩石学等等都提供了直接或间接的证据，证明地幔柱几乎存在整个地：质历史时期。当前地幔柱理论中在地球化学领域有两大研究热点：高钦低钦玄武岩的起源以及地幔柱中是否存在循环俯冲洋壳物质。完全解决这些问题才可能深入系统地建立地慢柱成矿作用模型。现在已经建立了一些矿床类型与地慢柱作用的联系：如现在认为赋存在金伯利岩中的金刚石矿床的形成与地慢柱作用密不可分，一些岩浆硫化物矿床和岩浆氧化物矿床很显然是地慢柱岩浆作用形成的，如西伯利亚火成岩省的Noril'sk-Talnakh铜镍铂族元素矿床以及KeweenawaJI大陆裂谷体系的Dultlth杂岩体的Cu-Ni矿床。另外还有赋存在大型基性一超基性层状岩体中的PGE、Ni和cu矿床，如Great Dyke和布什维尔德杂岩体。一些超大型热液矿床也与地慢柱有可能的联系（Pirajno，2000）：如270oMa形成的超大型Kidd Creek火山成因块状硫化物矿床（Bleeker et al.，1 999；Wynan et al.，1999）和南澳大利亚1600Ma形成的超大型olymPicD翻矿床。本文的研究工作包含两方面内容：通过热力学计算峨眉山玄武岩在深部的结晶分异，对峨眉山大火成岩省的岩浆量分布和岩浆氧化物矿床（华Ti磁铁矿矿床）的分布以及下地壳高波速层的物相进行理论解释；对峨眉山大火成岩省金宝山PGE典型矿床进行成岩成矿的地球化学研究，预测整个大火成岩省的岩浆硫化物矿床产出位置。大多数峨眉山玄武岩的 MgO＜7％，Ni为4-232ppm，它们是原始岩浆结晶分异后的产物。峨眉山玄武岩省下地壳和上地幔之间存在厚度为：8-25km1，P彼速为7.1-7.8km／s的附加层（高地震波速层）。滇西地区出露的洲套第三纪富碱斑岩，地球化学和同位素研究表明斑岩的岩浆源是来自“壳一慢混合层”，源区的形成时代为220-25Ma，与峨眉山玄武岩的形成时代一致。所以有理由认为该附加层是由峨眉山玄武岩在此结晶分异形成的。与地慢柱有关的洋岛Hawaii、Marquesas Islands；海底高原Oniong Java、大陆火山岩省ColumbiaRiver Plateaus地震彼研究都表明在上地慢顶部有一高速附加层，Farnetani etal.（1996）的研歼表明高速附加层是由来自地幔柱的岩浆在此结晶分异形成的。玄武岩是一种混合的部分熔融产物，是不同成分的地幔橄榄岩在不同的压力下熔出的。这种降压熔融高温高压实验是做不到的。熔出的熔体成分是温度、压力及橄榄岩成分（源区）的函数，形成的岩浆是一个多压熔融的集合体。热力学计算能够较为精确地计算出生成的岩浆成分和约束岩浆产生的过程。岩浆的结晶分异也是同样的情形，尤其是分离结晶过程，实验岩石学是很精确难模拟其过程的。热力学计算使用的MELTS程序，MELTS适用范围很广，适用于模拟岩石熔融生成岩浆和岩浆的冷却结晶。现今峨眉山大火成岩省的地壳厚度为40恤，这被认为是后期褶皱加厚的缘故。根据峨眉山玄武岩中辉石斑晶成分和玄武岩本身成分计算出分异结晶的压力为6kb，那么当时的地壳厚度约为20km：选择氧逸度为QFM，这一氧逸度范围认为是大多数大陆溢流玄武岩结晶分异时的氧化还原环境。热力学计算结果通过峨眉山玄武岩成分进行约束和验证。Al2O3、NaZO＋K 20、CaO与MgO计算的演化趋势线与实际观察的演化符合较好，橄榄石和斜方辉石的结晶使得CaO随着MgO的降低而增高；当单斜辉石成为液相线矿物时，cao也随着Mgo的降低而降低了。单斜辉石在岩浆演化到MgO＝10．3％时成为液相线矿物。整个计算过程中斜长石未成为液相线矿物，这与大多数玄武岩不具有Eu异常是一致的，并月＿Al2O3随着MgO的减小单调增加也说明了这点。不过大多数峨眉山玄武岩常含有斜长石斑晶，这是低压下结晶分异的结果。由于斜长石密度小，所有很难与高铁玄武岩分离。整个计算的难点也是创新点是波速计算。通过分离的堆晶矿物组合中各种矿物的成分和质量分数计算的附加层波速比观察值高，不过堆积岩体常常会有残留岩浆存在矿物晶粒间，这样会降低岩石的压缩波速。大型基性一超基性岩体常常会残留有或者捕获5-30％的岩浆。假定两个高波速附加层分别捕获7叭，和巧％的残留岩浆，计算的结果就大体等于观察值。热力学和质量平衡计算研究表明：高地震波速层为橄榄辉石岩一辉石岩的巨型侵入岩体；峨眉山中岩区的岩浆量最大也符合含V-Ti磁铁矿矿床只产在中岩区，如太和、白马、攀枝花、红格等岩体；西岩区的岩浆量最小表明几乎没有可能在西岩区形成有规模的V-Ti磁铁矿矿床，实际观察仅仅只见到数量少而小的岩体；东岩区下地壳厚达20灿1的高波速层暗示东岩区上地壳的侵入岩体积也应该具有相当规模，应该是V－Ti磁铁矿矿床成矿区。目前在东岩区很少发现与峨眉山玄武岩有关的岩浆矿床的主要原因是：东岩区的剥蚀深度不够，没有可观的侵入岩体出露，而中岩区侵入岩都侵入在元古代地层中。按照质量平衡的计算方法，最保守的估算整个峨眉地慢柱岩浆事件产生的岩浆量为8.9*106km3，上地壳峨眉山玄武岩和侵入岩体积为3.9*106km3。如果按照初始覆盖面积5x106km2计算（与西伯利亚暗色岩初始覆盖面积相当），喷发高峰期为2Ma，计算的喷发速率为3.9km3／year。这并不亚于西伯利亚暗色岩的喷发速率4km3／year。这对于研究峨眉山大火成岩浆事件与二叠·三叠交界或end-QuadaluPian生物灭绝之间的可能联系具有重要意义。本文另一方面的研究工作是：首先系统地介绍了岩浆硫化物矿床的基本原理，然后通过金宝山PGE矿床实例研究，提出金宝山岩体成岩模式，并且对整个峨眉山大火成岩省的岩浆硫化物矿床产出位置进行理论预测。详细地球化学研究表明金宝山镁铁一超镁铁岩是峨眉山大火成岩省古老火山岩浆房的残留物。岩体主要由底部超镁铁岩和上部镁铁岩组成，两种岩石的质量大致相同。根据超镁铁岩的矿物组合计算的成岩时的氧逸度较高，热力学方法计算的成岩压力为2kb左右。超镁铁岩的包嵌结构和铁铁岩的微晶一细晶结构说明超镁铁岩为镁铁岩结晶的矿物堆积形成的。镁铁一超镁铁岩的蚀变程度不同以及Sc、Sr、Eu等元素在两类岩石中的不同特征指示了整个成岩过程。金宝山岩体的原始岩浆 MgO=8％说明高镁玄武岩并不是形成PGE矿床的必要条件。金宝山的成岩模式是：在火山喷发前，岩浆侵位时橄榄石和少量铬尖晶石先结晶，沉淀在岩浆房底部；随后结晶的是斜方辉石和斜长石，斜方辉石也沉淀在岩浆房底部，斜长石由于密度较小集中中岩浆房上部，岩浆房的中部是：少量的斜长石小斑晶。由于斜方辉石和斜长石的结晶，这样岩浆中的Sc、Sr和Eu就会亏损，也是岩浆房底部堆积岩的原始捕获岩浆。火山喷发后，由于压力的突然降低，岩浆房底部的堆晶会发生再熔融，几乎消耗掉所有的斜方辉石，橄榄石也呈熔蚀状浑圆形态，重新熔融的斜方辉石导致超镁铁岩中残留岩浆比原始捕获岩浆更加富Sc，这种岩浆由于富MgO和在快速冷却的环境下同时结晶，最终形成光性方位一致的单刹辉石。喷发后岩浆房空间的剩余导致围岩-灰岩进入，造成岩浆房中剩余岩浆强烈的碳酸盐化。峨眉山玄武岩Cr-Mg#的相关关系定义一条正常玄武岩演化线。大多数这些玄武岩的Ni也保持了这种演化关系，其中低钦玄武岩和过渡型高钦玄武岩Ni-Mg＃相关关系远离了正常演化线，这些玄武岩的Cu-Mg#相关关系也有类似的情形。峨眉山低钦和过渡类型高钦玄武岩Ni和 Cu的非正常亏损，表明它们在地表下经历了硫饱和事件。金宝山岩浆硫化物矿床成岩模型的建立，为在整个大火成岩省寻找岩浆硫化物矿床提供了一种新认识。低钦和过渡型高钦玄武岩的古老火山口下部是岩浆硫化物矿床的所在地。

地幔去气与铀成矿的关系——以江西相山火山岩型铀矿为例

江西相山铀矿床，位于中生代赣一杭火山岩带相山火山塌陷盆地内，是中国目前发现的最大的火山岩型铀矿床，其独特的成矿环境及成矿机理为国内外地质界所瞩目。本论文主要运用岩石学、构造学寸流体包裹体地球化学、同位素地球化学、热力学方法，从相山铀矿床的成矿构造演化、成矿流体、岩石蚀变特征、成矿物质同位素组成特征以及热力学计算等方面对地慢去气特征、过程以及其与铀矿化的关系进行了详细的研究。本研究取得了以下主要认识：1、构造活动对成矿过程起到重要作用。区域深大断裂构造、慢源岩浆活动和碱交代蚀变作用，是相山铀矿田地（量去气作用产生的地慢流体参与成矿作用的有利条件和证据。2、热力学计算表明成矿期前成矿热液pH值为9．50，呈碱性；成矿期前，UO2（CO3）22-、UO2（Coa）44-两种形式迁移的U占总U的99.96％，即矿床中成矿期前的铀主要是以这两种形式迁移的。3、氦一氢同位素研究表明，相山铀矿床的成矿流体由富CO2和3He的慢源流体与贫CO2的大气成因流体混合而成。相山铀矿床成矿热液中的CO2总体属于慢源碳，主要是由地慢或分布在铀矿床中的漫源基性脉岩提供的，而且大部分是在地壳拉张作用期间由地慢去气作用产生而上升形成了成矿热液。4、相山铀矿田成矿期前的流体包裹体中气泡较大，气体含量较高，表明包裹体捕获时压力较大；成矿期和成矿后的包裹体中气泡较小，并存在大量的纯气相包体，通过激光拉曼分析测得的物相峰值极低，表明包体中所包含组分的含量极低。而且大量成矿期纯气相包体的发现也说明其是在去气过程中捕获的从成矿热液中释放出的气体。从成矿期前到成矿期后，CO2含量减小的变化。也说明了成矿作用中发生了减压去气过程。5、在铀成矿过程中，共发生了两次去气作用。第一次地慢去气作用产生并把C仇带入到成矿热液中，第二次成矿流体去气作用正好相反把CO2从成矿热液中带出。地慢去气作用产生富CO2+H2O的地慢流体运移到地壳浅部与大气降水混和，富含矿化剂的成矿溶液由此可以有效地从赋矿围岩（中酸性火山岩和盆地基底地层）中萃取出成矿所需的U。第一次地慢去气作用产生的富CO2+H2O的地慢流体为成矿提供了最充足的矿化剂（CO2），是成矿作用得以发生的最基本最重要的条件。