SYNTHESIS, PROPERTIES AND MOLECULAR-STRUCTURE OF 5-COORDINATE N,N-DIBENZYLDITHIOCARBAMATE COMPLEXES OF TITANOCENE, ZIRCONOCENE AND HAFNOCENE

The five complexes (RC5H4)2M(S2CNBz2)Cl (R = H, CH3; M = Ti, Zr, Hf; Bz = CH2C6H5) have been prepared by the reaction of (RC5H4)2MCl2 with anhydrous sodium salts of dibenzyldithiocarbamate in refluxing CH2Cl2. These complexes have been characterized by elemental analysis, IR and H-1 NMR. X-ray crystal structure determination of Cp2Zr(S2CNBZ2)Cl shows the molecule has a five-coordinate bent metallocene geometry in which the zirconium atom is attached to two eta-5-C5H5 groups, one bidentate dibenzyldithiocarbamate ligand and one chlorine [Zr-Cl, 2.549(1) angstrom; Zr-S, 2.734(1), 2.667(1); Cl-Zr-S, 137.6(1)-degrees and 73.3(1)-degrees; S-Zr-S, 64.3(1)-degrees]. The catalytic system Cp2Ti (S2CNBZ2)Cl-NaH exhibits high initial catalytic activity of hydrogenation of hexene-1 under mild conditions.

Extraction behavior of Mo and W as homologs of Sg with α-benzoinoxime

Solvent extraction of molybdenum and tungsten as homologues of Sg with a-benzoinoxime from HCl solutions has been investigated. The extraction equilibration was achieved at 20s for Mo and W. Molybdenum was almost quantitatively extracted from 0.001 to 4M HCl solutions, and the extraction yields decreased at higher and lower acid concentrations due to the formation of anionic oxychloride complex and anionic species MO42-, respectively. The extraction yield of W was lower than that of Mo during the whole range of acid concentration. The composition of the extracted species was determined by using the slope method in present experiment. The elemental analysis, IR and 1H NMR spectra of the extracted species suggest that the extracted complex contain one MoO22+or WO22+ groups bonded with two a-benzoinoxime molecules.

Characterizing a monotopic membrane enzyme. Biochemical, enzymatic and crystallization studies on Aquifex aeolicus sulfide:quinone oxidoreductase

Monotopic membrane proteins are membrane proteins that interact with only one leaflet of the lipid bilayer and do not possess transmembrane spanning segments. They are endowed with important physiological functions but until now only few of them have been studied. Here we present a detailed biochemical, enzymatic and crystallographic characterization of the monotopic membrane protein sulfide:quinone oxidoreductase. Sulfide:quinone oxidoreductase is a ubiquitous enzyme involved in sulfide detoxification, in sulfide-dependent respiration and photosynthesis, and in heavy metal tolerance. It may also play a crucial role in mammals, including humans, because sulfide acts as a neurotransmitter in these organisms. We isolated and purified sulfide:quinone oxidoreductase from the native membranes of the hyperthermophilic bacterium Aquifex aeolicus. We studied the pure and solubilized enzyme by denaturing and non-denaturing polyacrylamide electrophoresis, size-exclusion chromatography, cross-linking, analytical ultracentrifugation, visible and ultraviolet spectroscopy, mass spectrometry and electron microscopy. Additionally, we report the characterization of its enzymatic activity before and after crystallization. Finally, we discuss the crystallization of sulfide:quinone oxidoreductase in respect to its membrane topology and we propose a classification of monotopic membrane protein crystal lattices. Our data support and complement an earlier description of the three-dimensional structure of A. aeolicus sulfide:quinone oxidoreductase (M. Marcia, U. Ermler, G. Peng, H. Michel, Proc Natl Acad Sci USA, 106 (2009) 9625-9630) and may serve as a reference for further studies on monotopic membrane proteins. (C) 2010 Elsevier B.V. All rights reserved.

Antimicrobial screening and active compound isolation from marine bacterium NJ6-3-1 associated with the sponge Hymeniacidon perleve

Twenty-nine marine bacterial strains were isolated from the sponge Hymeniacidon perleve at Nanji island, and antimicrobial screening showed that eight strains inhibited the growth of terrestrial microorganisms. The strain NJ6-3-1 with wide antimicrobial spectrum was identified as Pseudoalteromonas piscicida based on its 16S rRNA sequence analysis. The major antimicrobial metabolite, isolated through bioassay-guide fractionation of TLC bioautography overlay assay, was identified as norharman (a beta-carboline alkaloid) by EI-MS and NMR.

An efficient combination of supercritical fluid extraction and high-speed counter-current chromatography to extract and purify homoisoflavonoids from Ophiopogon japonicus (Thunb.) Ker-Gawler

Supercritical fluid extraction (SFE) was used to extract homoisoflavonoids from Ophiopogon japonicus (Thunb.) Ker-Gawler. The optimization of parameters was carried out using an orthogonal test L-9 (3)(4) including pressure, temperature, dynamic extraction time and the amount of modifier. The process was then scaled up by 100 times with a preparative SFE system under the optimized conditions of 25 MPa, 55 degrees C, 4.0 h and 25% methanol as a modifier. Then crude extracts were separated and purified by high-speed counter-current chromatography (HSCCC) with a two-phase solvent system composed of n-hexane/ethyl acetate/methanol/ACN/water (1.8:1.0:1.0:1.2:1.0 v/v). There three homoisoflavonoidal compounds including methylophiopogonanone A 6-aldehydo-isoophiopogonone A, and 6-formyl-isoophiopogonanone A, were successfully isolated and purified in one step. The collected fractions were analyzed by HPLC. In each operation, 140 mg crude extracts was separated and yielded 15.3 mg of methylophiopogonanone A (96.9% purity), 4.1 mg of 6-aldehydo-isoophiopogonone A (98.3% purity) and 13.5 mg of 6-formyl-isoophiopogonanone A (97.3% purity) respectively. The chemical structure of the three homoisoflavonoids are identified by means of ESI-MS and NMR analysis.

One step isolation and purification of liquiritigenin and isoliquiritigenin from Glycyrrhiza uralensis Risch using high-speed counter-current chromatography

High-speed counter-current chromatography (HSCCC) technique in semi-preparative scale has been successfully applied to the separation of bioactive flavonoid compounds, liquiritigenin and isoliquiritigenin in one step from the crude extract of Glycyrrhiza uralensis Risch. The HSCCC was performed using a two-phase solvent system composed of n-hexane-ethyl acetate-methanol-acetonitrile-water (2:2:1:0.6:2, v/v). Yields of liquiritigenin (98.9% purity) and isoliquiritigenin (98.3% purity) obtained were 0.52% and 0.32%. Chemical structures of the purified liquiritigenin and isoliquiritigenin were identified by electrospray ionization-MS (ESI-MS) and NMR analysis. (c) 2005 Published by Elsevier B.V.

Preparation of high-molecular weight and high-sulfate content chitosans and their potential antioxidant activity in vitro

The influence of molecular weight and substitution degree of sulfated polysaccharides on their biological activity is considered in majority of works involving the anticoagulant or antiviral properties of these substances. Therefore, the present paper describes the effect of preparation conditions of sulfated chitosans on their molecular weight and sulfur content, such as different reaction time, acid solvent and temperature. Foregoing literature expounded the action of dichloroacetic acid (DCAA) as acid solvent in homogeneous reaction. However, DCAA is expensive and noxious, therefore, in the present paper cheap and non-noxious formic acid (88%) was in place of DCAA. Furthermore, during reaction formic acid was not dehydrated. Under formic acid we obtained the satisfying results that was higher yield and equivalent sulfur contents compared to DCAA. IR and C-13 NMR spectrums proved the structure of the resultant obtained under formic acid or DCAA to be same. Now, it has not been reported for formic acid as acid solvent in homogeneous reaction of chitosan sulfatation. In this present paper, we also determined antioxidant activity of high-molecular weight and high-sulfate-content chitosans (HCTS). The results showed that HCTS could scavenge superoxide and hydroxyl radical. Its IC50 is 0.012 and 3.269 mg/mL, respectively. It had obviously reducing power and slight chelating activity. The data obtained in in vitro models clearly establish the antioxidant potency of HCTS. It is a potential antioxidant in vitro. (C) 2005 Elsevier Ltd. All rights reserved.

The antioxidant activity of 2-(4(or 2)-hydroxyl-5-chloride-1,3-benzene-di-sulfanimide)-chitosan

Chitosan (CS) with two different molecular weights was modified by reacting with 4-hydroxyl-5-chloride-1,3-benzene-disulfo-chloride or 2-hydroxyl-5-chloride-1,3-benzene-disulfo-chloride to give new 2-(4(or 2)-hydroxyl-5-chloride-1,3-benzene-di-sulfanimide)-chitosan (2-HCBSAHCS, 2-HCBSALCS, 4-HCBSAHCS, 4-HCBSALCS). The structure of the derivatives was characterized by FT-IR and C-13 NMR spectroscopy. The antioxidant activities of the derivatives were investigated employing various established systems, such as hydroxyl radical ((OH)-O-center dot)/superoxide anion (O-2(radical anion)) scavenging/reducing power and chelating activity. All the derivatives showed stronger scavenging activity on hydroxyl radical than chitosan and ascorbic acid (Vc), and IC50 of 4-HCBSAHCS, 4-HCBSALCS, 2-HCBSAHCS and 2-HCBSALCS was 0.334, 0.302, 0.442, 0.346 mg/mL, respectively. The inhibitory activities of the derivatives toward superoxide radical by the PMS-NADH system were strong. The results showed that the superoxide radical scavenging effect of 2-(4(or 2)-hydroxyl-5-chloride-1,3-benzene-disulfanimide)-chitosan was higher than chitosan. The derivatives had obviously reducing power and slight chelating activity. The data obtained in in vitro models clearly establish the antioxidant potency of 2-(4(or 2)-hydroxyl-5-chloride-1,3-benzene-disulfanimide)-chitosan. (C) 2007 Elsevier Masson SAS. All rights reserved.

Structural studies on a novel fucogalactan sulfate extracted from the brown seaweed Laminaria japonica

A low molecular weight fucogalactan, obtained from the brown seaweed Laminaria japonica, was separated into three fractions (LF1, LF2 and LF3) by DEAE-Sepharose FF column chromatography. All three fractions contained predominantly fucose, sulfate group and galactose. The results showed that the main fraction LF2 consisted of L-fucose, D-galactose and sulfate at a molar ratio 6:1:9. Structural study on the LF2 was carried out by NMR spectroscopy. The backbone of LF2 was primarily (1 -> 3)-linked alpha-L-fucopyranose residues (75%) and a few (1 -> 4)-alpha-L-fucopyranose linkages (25%). The branch points were at C-4 of 3-linked alpha-L-fucopyranose residues by beta-D-galactopyranose unites (35%, molar ratio) or at C-2 of 3-linked alpha-L-fucopyranose residues by non-reducing terminal fucose unites (65%, molar ratio). Sulfate groups occupied at position C-4 or C-2, sometimes C-2, 4 to fucose residues, and C-3 and/or C-4 to galactose residues. The structure of LF2 was supposed as following: [GRAPHICS] (C) 2010 Elsevier B.V. All rights reserved.

Studies on synthesis, structure and biological activities of novel triazole compounds containing thioamide

Four novel triazole compounds containing thioamide group were designed and synthesized by using triazole, phenyl isothiocyanate and aryl ethyl ketone as raw material. Their structures were conformed by elemental analysis, H-1 NMR, IR and MS spectra. The crystal structure of 1-[1-anilinothiocarbonyl-1-(4-fluorobenzoyl)methyl]-1,2,4-trizole has been determined by X-ray diffraction analysis. The preliminary bioassays have shown that the title compounds exhibit certain antifungal activity.

Synthesis and. crystal structure of N '-(4-fluorobenzylidene)-2-(1H-1,2,4-triazole-1-yl) acetohydrazide

N'-(4-fluorobenzylidene)-2-(1H-1 2,4-triazole-1-yl) acetohydrazide was synthesized by the reaction of 4-fluorobenzaldehyde with 2-(1H-1 2,4-triazole-1-yl) acetohydrazide. The structure was confirmed via elemental analysis, MS, H-1 NMR, IR, and X-ray diffraction. It crystallized in a monoclinic system with space group P2 (1) a = 0.4905 (1) nm, b = 0.8160 (2) nm, c = 1.4105 (3) nm, beta = 93.33 (3)degrees, Z = 2, V = 0.5636 (2) nm(3), D-c = 1.457 Mg/m(3), mu = 0.112 mm(-1), F(000) = 256, and final R-1 = 0.0685. Several intermolecular hydrogen-bond interactions existed in the crystal structure, facilitating the stabilization of the compound.

Synthesis and QSAR studies of novel triazole compounds containing thioamide as potential antifungal agents

Eighteen novel triazole compounds containing thioamide were designed and synthesized. Their structures were confirmed by elemental analysis, H-1 NMR, IR, and MS. The title compounds exhibited certain antifungal activity. And the geometry structures of the title compounds were optimized by means of the density functional theory (DFT) method at B3LYP/6-31G* level. The quantitative structure-activity relationship (QSAR) of the title compounds was systematically investigated. A correlative equation between FA and DELH, V was well established by using the multiple linear regression (MLR). (c) 2006 Elsevier Ltd. All rights reserved.

An investigation of the roles of surface aluminum and acid sites in the zeolite MCM-22

Ammonia adsorption studies reveal that the observed Lewis acidity in the zeolite MCM-22 is derived from at least two types of framework aluminum sites (Al(F)), that is, octahedral Al(F) and three-coordinate Al(F). Comparative ammonia or trimethylphosphine (TMP) adsorption experiments with MCM-22 confirm that octahedral Al species gives rise to the signal at delta(ISO) approximate to 0 in the (27)Al NMR spectrum; this is a superposition of two NMR signals from the different Al species on the water-re constructed zeolite surface. A sharp resonance assigned to framework Al reversibly transforms on ammonia adsorption to delta(ISO) (27)Al approximate to 55 from tetrahedral Al(F), while the broad peak is assigned to nonframework aluminium which results from hydrothermal treatment. This study also demonstrates the effectiveness of (27)Al magic angle spinning (MAS) and multiple quantum (MQ) MAS NMR spectroscopy as a technique for the study of zeolite reactions.

A novel method to synthesize amorphous silica-alumina materials with mesoporous distribution without using templates and pore-regulating agents

In this study, a novel sol-gel method is used to synthesize amorphous silica-alumina materials with a narrow mesoporous distribution and various Si/Al molar ratios without using any templates and pore-regulating agents. During the preparation procedure, only inexpensive inorganic salts were used as raw materials, instead of expensive and harmful alkoxides. The precursor sol was dried at room temperature in a vacuum box kept at 60 mmHg until it began to form the gel. The results of a nitrogen sorption experiment indicate that the synthesized materials with different Si/Al molar ratios have similar mesoporous distributions (within 2-12 nm). Moreover, it was found that the material's pore size distribution remains at a similar value during the heat treatment from room temperature to 550 degreesC. On the basis of the nitrogen sorption, TEM, and AFM characterization results, a formation mechanism of mesopores which accounts for the experimental data is also suggested. This suggested mechanism involves rearrangement of the primary particles during the drying process to form the precursors of the similarly sized mesopores. The synthesized materials were characterized by XRD, thermal analysis (TG/DTA), Al-27 and Si-29 MAS NMR spectroscopy, SEM, TEM, and AFM. The results of Al-27 and 29Si MAS NMR indicate that the distribution of silicon and aluminum in the synthesized materials is more uniform and homogeneous than that in the mixed oxides prepared via the traditional sol-gel method even at high alumina contents. The type and density of the acid sites were studied using pyridine adsorption-desorption FTIR spectroscopy. It was shown that the acidity of the synthesized materials is higher than that of the silica-alumina materials prepared by conventional methods.

Synthesis of titanium silicalites in different template systems and their catalytic performance

Titanium silicalites have been synthesized in the TPABr+ammonia, TPABr+hexanediamine, TPABr+ethylenediamine, TPABr+diethylamine, TPABr+TEAOH, TPABr+n-butylamine, TPABr+TBAOH and TBAOH+n-butylamine systems. As-synthesized titanium silicalites were characterized by XRD, IR and C-13 CP MAS NMR. Catalytic performance in epoxidation of propylene and template effect was investigated. It has been shown that both TPABr and TBAOH serve as templating agent in TPABr+TBAOH system. But in other systems, when there is enough TPABr, organic amines or ammoniums only act as the bases. TEAOH or n-butylamine can take the role of template when less TPABr is added. It indicates that the ability of organic amines or ammoniums to direct the Pentasil structure decreases as follows: TPA(+)>TBA(+)>TEA(+)>n-butylamine. Catalysts exhibiting good performance in epoxidation of propylene can be attained using TPABr as the template and ammonia, n-butylamine, diethylamine, hexanediamine or TBAOH as bases. (C) 1999 Elsevier Science B.V. All rights reserved.