Analysis of current induced by long internal solitary waves in stratified ocean

An approximate theoretical expression for the current induced by long internal solitary waves is presented when the ocean is continuously or two-layer stratified. Particular attention is paid to characterizing velocity fields in terms of magnitude, flow components, and their temporal evolution/spatial distribution. For the two-layer case, the effects of the upper/lower layer depths and the relative layer density difference upon the induced current are further studied. The results show that the horizontal components are basically uniform in each layer with a shear at the interface. In contrast, the vertical counterparts vary monotonically in the direction of the water depth in each layer while they change sign across the interface or when the wave peak passes through. In addition, though the vertical components are generally one order of magnitude smaller than the horizontal ones, they can never be neglected in predicting the heave response of floating platforms in gravitationally neutral balance. Comparisons are made between the partial theoretical results and the observational field data. Future research directions regarding the internal wave induced flow field are also indicated.

Controlling parameter for wave types of long flexible riser undergoing vortex-induced vibration

Submerged floating tunnel (SFT) is a popular concept of crossing waterways. The failure of the cable may occur due to vortex-induced-vibration (VIV), and the stability of the cable is crucial to the safety of the entire tunnel. Investigation results in recent years show that the vortex-induced vibration of the flexible cables with large aspect ratio reveals some new phenomena, for example, the vortex-induced wave, multi-mode competition, wide band random vibration, which have brought new challenges to the study of vortex-induced vibration of long flexible cables. In this paper, the dimensionless parameter controlling the wave types of dynamic response of slender cables undergoing vortex-induced vibration is investigated by means of dimensional analysis and finite element numerical simulations. Our results indicate that there are three types of response for a slender cable, i.e. standing wave vibration, traveling wave vibration and intermediate state. Based on dimensional analysis the controlling parameter is found to be related to the system damping including fluid damping and structural damping, order number of the locked-in modes and the aspect ratio of cable. Furthermore through numerical simulations and parameter regression, the expression and the critical value of controlling parameter is presented. At last the physical meaning of the parameter is analyzed and discussed.

不同小麦品种（系）中主要矿质元素的含量比较及与品质的关系

采用微波消解、电感耦合高频等离子体原子发射光谱（ICP-AES）的方法,对62份不同小麦品种（系）中锌、铁、铜、钙、钠和钾的含量进行了测定。同时利用红外线品质测定仪对主要品质指标粗蛋白、湿面筋、沉降值进行了测定。结果表明，不同小麦品种（系）中各种矿质元素的含量存在差异，2006年小麦品种中铁含量变幅为18.55-58.19 ug/g，平均为30.83ug/g ，最高与最低的相差39.64ug/g；锌含量变幅为5.70-25.80 ug/g，平均为15.13ug/g ，最高与最低相差20.10ug/g。2008年小麦品种（系）中铁含量变幅为16.68-52.25 ug/g，平均为30.10ug/g，最高与最低相差35.58ug/g；锌含量变幅为12.29-33.47 ug/g，平均为21.11ug/g，最高与最低相差21.18ug/g；钙含量变幅为167.53-348.80ug/g，平均为248.59ug/g，最高与最低相差192.59ug/g；铜含量变幅为2.32-5.83 ug/g，平均为2.98ug/g，最高与最低的相差3.61ug/g；钾含量变幅为1822.71-4414.91 ug/g，平均为2617.87ug/g，最高与最低的相差2634.72ug/g；钠含量变幅为10.25-39.82 ug/g，平均为23.05ug/g，最高与最低的相差29.57ug/g。 两年不同小麦品种（系）中矿质元素的含量分析结果表明：铁、铜、钙、钠和钾含量年际变化不明显,说明小麦对铁、铜、钙、钠和钾的吸收较稳定；锌含量变化较大，可能受环境的影响比较大。分析各矿质元素含量与粗蛋白、湿面筋、沉降值及元素之间的相关关系，结果表明，锌含量与粗蛋白含量呈极显著正相关关系，相关系数为0.317，与湿面筋含量之间呈显著正相关，相关系数达到0.246；铁含量与粗蛋白含量呈显著的正相关关系，相关系数是0.262；铜、钙、钠和钾含量与粗蛋白含量、湿面筋和沉降值之间存在正相关，但不显著，其中钠与沉降值之间为负相关。表明施锌或铁对提高小麦粗蛋白和湿面筋有显著效应，其余矿质元素有促进作用但不明显。 利用RAPD分子标记技术对川育23、41058、川育20及其父母本进行分析，力图从分子水平找到小麦矿质元素含量之间的差异性，琼脂糖电泳结果表明不同的小麦品种（系）间扩增出了差异条带。 以上研究结果，将对筛选“微量营养强化型”小麦新材料，选育“微量营养强化型”小麦新品种奠定基础。 62 different wheat cultivars was digested with HNO3 in a tightly closed vessel heated under micro-wave,then contents of zinc，iron,copper，calcium，sodium and potassium were determined by inductively coupled plasma-atomic emission spectroscopy(ICP-AES)．The main indexes of wheat quality such as total protein、wet glu and sedimentation volume were detected by Infratec 1255 Food & Feed Analyzer at the same time.The obtained results showed that variation for all of the mineral elements concentrations among different cultivars were observed .In 2006, the amplitude variation of the iron content was 18.55-58.19 ug/g,the average value was 30.83ug/g,and 39.64ug/g between the highest-content cultivar and the lowest one; the amplitude variation of the zinc content was 5.70-25.8 ug/g,the average value was 15.13ug/g,and 20.10ug/g between the highest-content cultivar and the lowest one.In 2008, the amplitude variation of the iron content was 16.68-52.25 ug/g,the average value was 30.10ug/g,and 35.58ug/g between the highest-content cultivar and the lowest one; the amplitude variation of the zinc content was 12.29-33.47 ug/g,the average value was 21.11ug/g,and 21.18ug/g between the highest-content cultivar and the lowest one; the amplitude variation of the calcium content was 167.53-348.80ug/g,the average value was 248.59ug/g,and 192.59ug/g between the highest-content cultivar and the lowest one; the amplitude variation of the copper content was 2.32-5.83 ug/g,the average value was 2.98ug/g,and 3.61ug/g between the highest-content cultivar and the lowest one; the amplitude variation of the potassium content was 1822.71-4414.91 ug/g,the average value was 2617.87ug/g,and 2634.72ug/g between the highest-content cultivar and the lowest one; the amplitude variation of the sodium content was 10.25-39.82 ug/g,the average value was 23.05ug/g,and 29.57ug/g between the highest-content cultivar and the lowest one. Analysis was made on the annual variation of mineral elements content in different Wheat cultivars ,the result shows:there is no obvious difference of iron ,copper ,sodium、calcium and potassium concentrations in wheat cultivars, suggesting the absorption of the iron, copper, sodium、calcium and potassium by wheat are relatively steady ,but zinc concentrations change obviously ,maybe influenced heavily by environment . The correlation between mineral elements 、mineral elements and total protein、mineral elements and sedimentation volume as well as mineral elements and wet glut were analysed in this paper, the result showed that there was significant positive correlation between zinc content and total protein (the correlation coefficient is 0.317), positive correlation between zinc content and wet glu (the correlation coefficient is 0.246), positive correlation between iron content and total protein (the correlation coefficient is 0.262). there was positive but not obvious correlation between the contents of copper, calcium, sodium or potassium and total protein, wet glut or sedimentation volume,among which was negative correlation between sodium and sedimentation volume.It was indicated zinc or iron fertilization has prominent effects in improving the total protein in wheat, the rest mineral elements have Non- obvious facilitation. The study then forecasted the genetic difference of different wheat by the molecular marker of RAPD in order to find differences in molecular level. Chuanyu23、41058、chuanyu20 as well as their male and female parents were analysed by RAPD markers,Agarose gel electrophoresis of DNA revealed the appearance of differential bands . The above-mentioned results of this study establish the foundation to screening the new materials of wheat of " strengthening type of micro- nutrition ", and to breeding the new wheat cultivars of" strengthening type of micro- nutrition ".

X(3915) and X(4350) as New Members in the P-Wave Charmonium Family

The analysis of the mass spectrum and the calculation of the strong decay of P-wave charmonium states strongly purport to explain the newly observed X(3915) and X(4350) as new members in the P-wave charmonium family, i.e., chi'(c0) for X(3915) and chi ''(c2) for X(4350). Under the P-wave charmonium assignment to X(3915) and X(4350), the J(PC) quantum numbers of X(3915) and X(4350) must be 0(++) and 2(++) respectively, which provide important criteria to test the P-wave charmonium explanation for X(3915) and X(4350) proposed by this Letter. The decay behavior of the remaining two P-wave charmonium states with the second radial excitation is predicted, and an experimental search for them is suggested.

Phenomenological analysis of the double-pion production in nucleon-nucleon collisions up to 2.2 GeV

With an effective Lagrangian approach, we analyze several NN -> NN pi pi channels by including various resonances with mass up to 1.72 GeV. For the channels with the pion pair of isospin zero, we confirm the dominance of N*(1440) -> N sigma in the near-threshold region. At higher energies and for channels with the final pion pair of isospin one, we find large contributions from N*(1440) -> Delta pi, double-Delta, Delta(1600) -> N*(1440)pi, Delta(1600) -> Delta pi and Delta(1620) -> Delta pi. There are also sizable contributions from Delta -> Delta pi, Delta -> N pi, N -> Delta pi, and nucleon pole at energies close to the threshold. We give a good reproduction to the total cross sections up to beam energies of 2.2 GeV except for the pp -> pp pi(0)pi(0) channel at energies around 1.1 GeV and our results agree with the existing data of differential cross sections of pp -> pp pi(+)p pi(-), pp -> nn pi(+)pi(+), and pp -> pp pi(0)pi(0) which are measured at CELSIUS and COSY.

Analysis of sulfur-containing compounds in crude oils by comprehensive two-dimensional gas chromatography with sulfur chemiluminescence detection

This paper reports an analytical method for separating, identifying, and quantifying sulfur-containing compounds in crude oil fraction (IBP-360degreesC) samples based on comprehensive two-dimensional gas chromatography coupled with a sulfur chemiluminescence detector. Various sulfur-containing compounds and their groups were analyzed with one direct injection. 3620 peaks were detected including 1722 thiols/thioethers/ disulfides/1-ring thiophenes, 953 benzothiophenes, 704 dibenzothiophenes, and 241 benzonaphthothiophenes. The target sulfur compounds and their groups were identified based on the group separation feature and structured retention of comprehensive two-dimensional gas chromatography as well as standard substances. The quantitative analysis of major sulfur-containing compounds and total sulfur was based on the linear response of the sulfur chemiluminescence detector using the internal standard method. The sulfur contents of target sulfur compounds and their groups in 4 crude oil fractions were also determined. The recoveries for standard sulfur-containing compounds were in the range of 90-102%. The quantitative result of total sulfur in the Oman crude oil fraction sample was compared with those from ASTM D 4294 standard method (total S by X-ray fluorescence spectrometry), the relative deviation (RD%) was 4.2% and the precision of the method satisfactory.

Phosphoproteome analysis of mouse liver using immobilized metal affinity purification and linear ion trap mass spectrometry

Since protein phosphorylation is a dominant mechanism of information transfer in cells, there is a great need for methods capable of accurately elucidating sites of phosphorylation. In recent years mass spectrometry has become an increasingly viable alternative to more traditional methods of phosphorylation analysis. The present study used immobilized metal affinity chromatography (IMAC coupled with a linear ion trap mass spectrometer to analyze phosphorylated proteins in mouse liver. A total of 26 peptide sequences defining 26 sites of phosphorylation were determined. Although this number of identified phosphoproteins is not large, the approach is still of interest because a series of conservative criteria were adopted in data analysis. We note that, although the binding of non-phosphorylated peptides to the IMAC column was apparent, the improvements in high-speed scanning and quality of MS/MS spectra provided by the linear ion trap contributed to the phosphoprotein identification. Further analysis demonstrated that MS/MS/MS analysis was necessary to exclude the false-positive matches resulting from the MS/MS experiments, especially for multiphosphorylated peptides. The use of the linear ion trap considerably enabled exploitation of nanoflow-HPLC/MS/MS, and in addition MS/MS/MS has great potential in phosphoproteome research of relatively complex samples. Copyright (C) 2004 John Wiley Sons, Ltd.

Unilamellar liposomes covalently coupled on silica gel for liquid chromatography

Silica gel was used as a support for the covalent coupling of liposomes, which could overcome drawbacks of soft gel beads in column efficiency and separation speed. The influences of the concentration of added dimethylaminopyridine and reaction time on the chloroformate activation reaction of silica gel were investigated. Temperature and pH for covalent coupling of liposomes on the activated silica gel were also optimized. Experimental results indicated that the stability of the covalently coupled liposome columns was obviously superior to that of the noncovalently coated liposome columns but the selectivity of both columns was basically identical. Separation and analysis of a crude extract of a traditional Chinese medicine Ligusticum Wallichii and a mixture of small peptides on both columns further support this conclusion.

Bonding and correlation analysis of various SiCO isomers

The structural properties for various SiCO isomers in the singlet and triplet states have been investigated using CASSCF methods with a 6-311 +G* basis set and also using three DFT and MP2 with same basis set for those systems except for the linear singlet state. The detailed bonding character is discussed, and the state-state correlations and the isomerization mechanism are also determined. Results indicate that there are four different isomers for each spin state, and for all isomers, the triplet state is more stable than the corresponding singlet state. The most stable is the linear SiCO ((3)Sigma(-)) species and may be refer-red to the ground state. At the CASSCF-MP2(full)/6-311+G* level, the state-state energy separations of the other triplet states relative to the ground state are 43.2 (cyclic), 45.2 (linear SiOC), and 75.6 kcal/mol (linear CSiO), respectively, whereas the triplet-singlet state excitation energies for each configuration are 17.3 (linear SiCO), 2.2 (cyclic SiCO), 10.2 (linear SiOC), and 18.5 kcal/mol (linear CSiO), respectively. SiCo ((3)Sigma(-)) may be classified as silene (carbonylsilene), and its COdelta- moiety possesses CO- property. The dissociation energy of the ground state is 42.5 kcal/mol at the CASSCF-MP2(full)/6-311+G* level and falls within a range of 36.5-41.5 kcal/mol at DFT level, and of 23.7-28.9 kcal/mol at the wave function-correlated level, whereas the vertical IP is 188.8 kcal/mol at the CASSCF-MP2(full)/6-311+G* level and is very close to the first IP of Si atom. Three linear isomers (SiCO, SiOC, and CSiO) have similar structural bonding character. SiOC may be referred to the iso-carbonyl Si instead of the aether compound, whereas the CSiO isomer may be considered as the combination of C (the analogue of Si) with SiO (the analogue of CO). The bonding is weak for all linear species, and the corresponding potential energy surfaces are flat, and thus these linear molecules are facile. Another important isomer is of cyclic structure, it may be considered as the combination of CO with Si by the side pi bond. This structure has the smallest triplet state-singlet state excitation energy (similar to2.2 kcal/mol); the C-O bonds are longer, and the corresponding vibrational frequencies are significantly smaller than those of the other linear species. This cyclic species is not classified as an epoxy compound. State-state correlation analysis and the isomerization pathway searches have indicated that there are no direct correlations among three linear structures for each spin state, but they may interchange by experiencing two transition states and one cyclic intermediate. The easiest pathway is to break the Si-O bond to go to the linear SiCO, but its inverse process is very difficult. The most difficult process is to break the C-O bond and to go to the linear CSiO.

Analysis of quinolizidine alkaloids in Sophora flavescens Ait. by capillary electrophoresis with tris(2,2 '-bipyridyl) ruthenium (II)-based electrochemiluminescence detection

A capillary electrophoresis method coupled with electrochemiluminescence detection for the analysis of quinolizidine alkaloids was established, especially, oxymatrine (OMT) which could not be measured by previous electrochemiluminescence methods was detected sensitively herein. Complete separation of sophoridine (SR), matrine (MT) and OMT was achieved within 13 min using a background electrolyte of 50mM phosphate buffer at pH 8.4 and a separation voltage of 15 kV. The calibration curves showed a linear range from 2.8 x 10(-8) to 4.4 x 10(-7) M for SR, 2.7 x 10(-8) to 4.4 x 10(-7) M for MT.

Short-capillary electrophoresis with electrochemiluminescence detection using porous etched joint for fast analysis of lidocaine and ofloxacin

Fast analysis of ofloxacin and lidocaine, as bactericide and analgesic or anesthetics, is of clinic importance for understanding the patient's medical process. This paper presented a high throughput, simple analysis method of lidocaine and ofloxacin by capillary electrophoresis coupled with electrochemiluminescence (ECL) using porous etched joint. To shorten the analysis time and to improve the analytical performance, a capillary with 10 cm in length was used as the separation channel. The cyclic voltammograms of Ru(bpy)(3)(2+) with different capillary length at same field strength showed that the porous etched joint eliminated the effect of electrophoretic current on the ECL detection. Following micro total analysis systems (muTAS), some advantages of which this approach has, the fabrication of channel in chip was not needed. Compared with capillary electrophoresis with 40-cm-long capillary, the high sample throughput and low zone broadening may be the main advantage of the present system. Under optimal condition, the detection limits of lidocaine and ofloxacin based on peak height were 3.0 x 10(-8) and 5.0 x 10(-7) mot L-1 and a 60 h(-1) of sampling frequency was obtained.

Determination of Nb and Ta in Nb/Ta minerals by inductively coupled plasmas optical emission spectrometry using slurry sample introduction

The determination of Nb and Ta in Nb-Ta minerals was accomplished by slurry nebulization inductively coupled plasma optical emission spectrometry (ICP-OES), using a clog-free V-groove ceramic nebulizer. Samples were first wet-ground to appropriate particle sizes with narrow size distribution and 90% of the particles in the slurry were smaller than 2.32 mu m in diameter. Subsamples were then dispersed in pH 9 aqueous solutions, and agitated in an ultrasonic bath for 15 min prior to analysis. Due to the lack of slurry standards matching well with the samples, calibration was simply carried out using aqueous solution standards. Results were compared with those obtained from a conventional fusion decomposition procedure and acid digestion procedures and a good agreement between the measured and referred values was obtained. The technique provided a good alternative for the rapid determination of Nb and/or Ta in their corresponding minerals.

Determination of ultra-trace concentrations of elements in high purity tellurium by inductively coupled plasma mass spectrometry after Fe(OH)(3) coprecipitation

In this work, a method was established for the determination of impurities in high purity tellurium by inductively coupled plasma mass spectrometry (ICP-MS) after Fe(OH)(3) coprecipitation. After comparison of coprecipitation ability and separation efficiency between Fe(OH), and Al(OH)(3), Fe(OH)(3) was chosen as the precipitate. A separation factor of 160 for 200 mg tellurium was obtained under conditions of pH 9 and 2 mg of Fe3(+). The 13 elements, such as Bi, Sn, Pb, In, Tl, Cd, Cu, Co, Ni, Zn, Ti, Be and Zr, could be almost completely coprecipitated under these conditions. In addition, Te memory effect imposed on the ICP-MS instrument was assessed, as well as Te matrix effect that caused the low recovery of Ga, As, Sb and V in real sample was discussed. Finally, the method was evaluated through recovery test and was applied to practical sample analysis, with detection limits of most of the elements being below 0.15 mug g(-1) and R.S.D. below or at approximately 10%, which indicated that this method could fully satisfy the requirements for analysis of 99.999% similar to 99.9999% high purity Te.

Major, minor and trace-elemental contents analysis in northeast soybeans by ICP-AES

Major, minor and trace elemental contents in northeast China soybeans were determined by using inductively, coupled plasma atomic emission spectrometry (ICP-AES). Three different sample digestion methods including two wet digestions, HNO3-HClO4 and HNO3-H2SO4 and a dry ash method were compared. Owing to the high oil content in soybeans, long time is needed and access acid should be added, with mixed acid digestion methods, which may result in higher sample blank. Therefore, the dry ask method would be more proper for the pre-treatment of soybean samples. Potassium and phosphorus are major elements in soybeans, so the effect of potassium and phosphorus on the other elements was investigated. Results showed that the potassium and phosphorus did not affect the determination. of other trace elements. There are not significant differences in trace elemental contents for the eleven northeast China soybeans.

Matrix effects in inductively coupled plasma mass spectrometry by use of organic solvents

Matrix effects arising from ethanol, propanol, glycerol, acetic acid, ethylenediamine and triethanolamine in inductively coupled plasma mass spectrometry have been studied. Addition of ethanol, propanol, glycerol, acetic acid, ethylenediamine and triethanolamine into solution has an enhancement effect on the signal intensity of analyte with ionization potential between 9 and 11 eV. The ethylenediamine and triethanolamine have higher enhancement effect on the signal intensity of Hg than that of ethanol, propanol, glycerol and acetic acid. Addition of ethylenediamine and triethanolamine into solution has a suppression effect on the signal intensity of Ph and Sr. The mechanism of the enhancement or suppression was investigated. The signal enhancement of Hg in the presence of ethylenediamine and triethanolamine is not caused by improved degree of ionization of Hg and nebulization efficiency. The suppression effects of Ph and Sr in the presence of ethylenediamine and triethanolamine are due to decrease of atomization efficiency of these elements. A method for the determination of Hg in the biological standard samples Ly ICP-MS was developed.