Investigating mechanical response of single chain polystyrene particles by scanning probe techniques

Single chain polystyrene particles were obtained by dilute solution casting method. The sample with both single chain polystyrene particles and multi-chain (more than 1000 molecular chains) polystyrene particles was obtained by a little more concentrate solution. Force modulation technique showed that single chain polystyrene particles were softer than multichain polystyrene particles. On the other hand, nanoindentation experiments on multi-chain particles and bulk polystyrene manifested that the elastic modulus of multi-chain polystyrene particles was very close to that of bulk polystyrene. Therefore, it was concluded that single chain polystyrene particles were softer than bulk polystyrene,which indicated that the density of intrachain entanglement points in the single chain polystyrene particles was not as large as that of the interchain entanglement points in the bulk state.

X-ray crystal structure and molecular mechanics calculations of (2,6-iso-dipropyl-phenylamide) dimethyl (tetra-methylcyclopenta-dienyl) silane titanium dichloride

Crystal and molecular structure of (2.6-dipropylphenylamide) dimethyl (tetra-methyl cyclopentadienyl) silane titanium dichloride (I) was fully characterized by X-ray diffraction. The crystal is obtained from a mixture of ether/hexane as orthorhombic. with a = 12.658 (3) Angstrom. b = 16.62 (3) Angstrom. c = 11.760 (2) Angstrom. V = 2474.2 (9) Angstrom(3). Z = 4, space group Pnma. R = 0.0399; Componud I compose of the pi-bounded ring with its dimethylsilyl-dipropyl phenyl amido group and the two terminal chloride atoms coordinated to central metal to form a so-called constrained geometry catalyst (CGC) structure. The result of molecular mechanics (MM) calculations on compound I shows that bond lengths and bond angles from the MM calculation are comparable to the data obtained from the X-ray diffraction study. The relation of the structure of CGCs and their catalytic activity by MM calculations is also discussed.

扫描探针显微技术研究聚苯乙烯单链颗粒的力学响应

首先通过极稀溶液滴膜的方法得到了聚苯乙烯的单链颗粒 .之后 ,采用稍浓溶液得到了既有单链聚苯乙烯颗粒又有多链 (上千根 )聚苯乙烯颗粒的样品 .力调制技术显示单链聚苯乙烯颗粒比多链聚苯乙烯颗粒软 ;另一方面 ,对多链聚苯乙烯颗粒和聚苯乙烯本体的纳米压印实验结果表明二者的模量是近似的 .因此 ,可以得出单链聚苯乙烯颗粒比本体聚苯乙烯软 ,这说明存在于聚苯乙烯单链颗粒中的分子链内的缠结点密度不如存在于本体中的分子链间的缠结点密度大

Chiral separation of promethazine by capillary electrophoresis with end-column amperometric detection

Sensitive end-column amperometric detection has been successfully coupled to capillary electrophoresis for chiral separation of promethazine, with a carbon fiber microdisk electrode as working electrode. Baseline separation and sensitive detection were achieved under optimum conditions: 0.030 M Na2HPO4 and 0.015 M citric acid at pH = 2.50, 1.0 mM beta -CD, 10 kV separation voltage, and detection potential 1.10 V (vs Ag/AgCl). The numbers of theoretical plates were higher than 700000, and the detection limit was 5 x 10(-8) M. On-line treatment of the electrode has also been studied and discussed.

Electrochemical Study of the Self-exchange between Viologen-thiol Self assembled Monolayers and Alkanethiol Gold Electrodes

The preparation and cyclic voltammetric behaviors of self assembled monolayers (SAMs) containing electroactive viologen group have been investigated. Treatment of this viologen SAM with solutions of alkanethiols remits in replacing the electroactive third, shifting negatively its formal potentials and decreasing its heterogeneous elixtron transfer constants along with the immersion time. The aim of the work is to understand the exchange regularity of the mixed SANK on gold electrode surface.

Luminescent properties of Ba-3(PO4)(2):Eu, Tb phosphors

Luminescence of europium (III), europium(II) and terbium(III) has been observed in Ba-3(PO4)(2):Eu, Tb phosphors which are synthesized in air atmosphere. The valence state of europium is influenced by amount of terbium. It is notable that the relative intensity of the emission spectra peaks corresponding to Eu2+ is increased if the amount of Tb3+ is increased. These phenomena can be explained by an electron transfer mechanism. We predict a new kind of two-rare-earth codoped trichromatic phosphors in Ba-3(PO4)(2) matrix.

A study of the dependence of ferrocene diffusion on electrolyte concentration and size in a polymer medium using non-steady-state chronoamperometry

This article describes a quantitative study of the diffusion rate of ferrocene(Fc) dissolved in ploy(ethylene glycol)(PEG) medium containing MClO(4)(M = Li+, Na+, Bu(4)N(+), Hx(4)N(+)). The apparent diffusion coefficient D-app and the active concentration c(a) of Fc were simultaneously measured by using non-steady-state chronoamperometry. The D-app and c(a) of Fc have been estimated in PEG containing different concentrations and sizes of supporting electrolyte, and the dependence of D-app on ferrocene concentrations has been observed. The values of D-app decrease with increasing concentrations of Fc, increasing concentrations of LiClO4 or the ratio (O:Li) and also with 4 decreasing cation radius of the electrolyte. The temperature dependencies conform to a simple free volume model. The concentration and size of the counterion dependencies of the diffusion rate are similar to the behavior of their dependencies of ionic conductivity in polyelectrolyte.

IN-SITU COMPOSITE - PHENOLPHTHALEIN POLYETHERSULFONE-THERMOTROPIC LIQUID-CRYSTALLINE POLYMER BLENDS

Phase behavior, thermal, theological and mechanical properties plus morphology have been studied for a binary polymer blend. The blend is phenolphthalein polyethersulfone (PES-C) with a thermotropic liquid crystalline polymer (LCP), a condensation copolymer of p-hydroxybenzoic acid with ethylene terephthalate (PHB-PET). It was found that these two polymers form optically isotropic and homogeneous blends by means of a solvent casting method. The homogeneous blends undergo phase separation during heat treatment. However, melt mixed PES-C/PHB-PET blends were heterogeneous based upon DSC and DMA analysis and SEM examination. Addition of LCP in PES-C resulted in a marked reduction of melt viscosity and thus improved processability. Compared to pure PES-C, the charpy impact strength of the blend containing 2.5% LCP increased 2.5 times. Synergistic effects were also observed for the mechanical properties of blends containing < 10% LCP. Particulates, ribbons, and fibrils were found to be the typical morphological units of PHB-PET in the PES-C matrix, which depended upon the concentration of LCP and the processing conditions.

Thermal decomposition processes of polyaniline and poly-o-toluidine investigated by direct pyrolysis mass spectrometry

The thermal decomposition of polyaniline(PAn) and poly-o-toluidine(POT) was studied by means of direct pyrolysis mass spectrometry(DM) and MS/MS, The results showed that both benzene-diamine and quinone-diimine units were produced, and the intensities of fragments corresponding to quinone-diimine units increased as the oxidation degrees increased, The mechanism of thermal decomposition of PAn and POT was given for the first time.

高氯酸铒与蛋氨酸配合物的合成及结构研究

在水溶液中合成了标题配合物，其化学式为Ｅｒ（Ｍｅｔ）２（ＣｌＯ４）３·４．５Ｈ２Ｏ（Ｍｅｔ为蛋氨酸）．研究了配合物的红外光谱．用Ｘ射线单晶衍射法测定了配合物的晶体结构，结果表明，其结构式为［Ｅｒ２（ＤＬ－Ｍｅｔ）４·８Ｈ２Ｏ］·（ＣｌＯ４）６·Ｈ２Ｏ．属单斜晶系，空间群为Ｐ２１／ｎ，晶胞参数为：ａ＝１３．８４６（５）Ａ，ｂ＝２１．７９４（７）Ａ，Ｃ＝１９．１３１（５），β＝９０．５１（３）°，Ｖ＝５７７２．８４（３）３，Ｚ＝４．每两个Ｅｒ原子之间通过四个蛋氨酸的羧基桥相连而形成双核配合物．两对对位的蛋氨酸中，其中一个为Ｌ型，而另一个为Ｄ型．每个Ｅｒ原子还与四个水分子配位，其配位数为８．对于每个双核离子而言，其配位多面体由两个四方反棱柱体组成．

APPLICATION OF FACTOR-ANALYSIS TO CORRECTION OF SPECTRAL OVERLAP INTERFERENCE IN INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION-SPECTROMETRY

Correction of spectral overlap interference in inductively coupled plasma atomic emission spectrometry by factor analysis is attempted. For the spectral overlap of two known lines, a data matrix can be composed from one or two pure spectra and a spectrum of the mixture. The data matrix is decomposed into a spectra matrix and a concentration matrix by target transformation factor analysis. The component concentration of interest in a binary mixture is obtained from the concentration matrix and interference from the other component is eliminated. This method is applied to correcting spectral interference of yttrium on the determination of copper and aluminium: satisfactory results are obtained. This method may also be applied to correcting spectral overlap interference for more than two lines. Like other methods of correcting spectral interferences, factor analysis can only be used for additive spectral overlap. Results obtained from measurements on copper/yttrium mixtures with different white noise added show that random errors in measurement data do not significantly affect the results of the correction method.

超高灵敏显色反应及其应用的研究Ⅷ.铅-乙基罗丹明B-碘化物体系

本文研究了在聚乙稀醇-阿拉伯胶共存下,乙基罗丹明B和PbI_4~(2-)的超高灵敏显色反应并制定了新的光度法。缔合物最大吸收为605nm,ε值为1.0×10~6·L·mol~(-1)·cm~(-1)。经巯基棉分离、富集,本法成功地用于硫酸镁、硫酸锌和硫酸亚铁铵等试剂中痕量铅的测定。

星形聚苯乙烯本体粘弹性对结构的依赖性

用应力松弛法研完了一组4—12支链星形聚苯乙烯本体的粘弹性。从应力松弛主曲线测定了零切变粘度η_0、稳态柔量J_e~o和其它流变学参数。结果发现,零切变粘度和最大松弛时间τ_m强烈地依赖于聚合物的分子尺寸,并且可以用无扰特性粘度或折合分子量来描述。η_0和τ_m随支化度增大而增大。实验还直接证实了支链长度相同的星形聚合物的J_e~o与支链数目无关,但是星形聚合物的稳态柔量比具有和支链间分子量相同的线形聚合物的稳态柔量大。