高电荷态离子Ar~(13+)轰击Mo金属表面形成靶原子X射线谱测量

本工作实验研究低能高电荷态Ar13+离子与金属Mo表面作用过程中Mo原子受激发射X射线和X射线强度随入射能量的变化。实验结果表明,低速高电荷离子与金属表面原子相互作用可有效地激发靶原子或靶离子内壳层电子而发射X射线。

WDM驱动程序在HIRFL-CSR电源控制系统中的应用

为解决基于Web多层架构的HIRFL-CSR电源控制系统的可靠性和实时性差的问题,利用直接在WDM驱动程序中处理被控设备异常的方法来提高控制系统的可靠性和实时性, WDM驱动程序利用WMI主动向应用程序报告被控设备的异常,简化了控制系统的软件结构,从而进一步提高控制系统的实时性和控制效率。

电子束的绝热展开

考虑空间电荷效应，用数值方法模拟计算了电子束绝热展开过程．当初始磁感应强度与最终磁感应强度之比为Ｋ时，电子束横向温度由初始值Ｔｉ降低 Ｔｉ／Ｋ．研究了不同能量、不同流强的电子束达到预期的绝热展开倍数所需的最低磁感应强度．

Void swelling in a 9Cr ferritic/martensitic steel irradiated with energetic Ne-ions at elevated temperatures

In this work the void swelling behavior of a 9Cr ferritic/martensitic steel irradiated with energetic Ne-ions is studied. Specimens of Grade 92 steel (a 9%Cr ferritic/martensitic steel) were subjected to an irradiation of Ne-20-ions (with 122 MeV) to successively increasing damage levels of 1, 5 and 10 dpa at a damage peak at 440 and 570 degrees C, respectively. And another specimen was irradiated at a temperature ramp condition (high flux condition) with the temperature increasing from 440 up to 630 degrees C during the irradiation. Cross-sectional microstructures were investigated with a transmission electron microscopy (TEM). A high concentration of cavities was observed in the peak damage region in the Grade 92 steel irradiated to 5 dpa, and higher doses. The concentration and mean size of the cavities showed a strong dependence on the dose and irradiation temperature. Enhanced growth of the cavities at the grain boundaries, especially at the grain boundary junctions, was observed. The void swelling behavior in similar 9Cr steels irradiated at different conditions are discussed by using a classic void formation theory. (c) 2008 Elsevier B.V. All rights reserved.

Production cross-section of Th-236 in the interaction of U-238 with 60MeV/u O-18 Ions

The neutron-rich target-like isotope Th-236 was produced in U-238-2p multinucleon transfer reaction between a 60MeV/u O-18 beam and nature U-238 targets. The thorium activities were radiochemically separated from the mixture of uranium and reaction products. The isotope Th-236 was identified by 642.2keV, 687.6keV and 229.6keV characteristic gamma-rays. The production cross section of Th-236 has been determined to be 250 +/- 50 mu b.

单次分子镀法制备部分La系及~(238)U靶的实验研究

采用单次分子镀方法研究了异丙醇-硝酸体系中电流密度、分子镀持续时间及两极间距离对镀层性能和电沉积效率的影响,确定了制备La,Sm,Eu,Gd,Tb靶及238U靶的最佳工艺条件。因制备的靶不同,电流密度一般介于2—8mA/cm2之间,两极间最优距离为3cm,分子镀1h,用分光光度法测定各靶的沉积效率均高于85%。利用扫描电子显微镜(SEM)对部分靶的表面形貌分析后发现靶面结构均匀致密。目前制得的Gd靶和Tb靶已用于中国科学院近代物理研究所加速器SFC低能核化学终端上,利用19F束流轰击,分别产生了Ta和W的短寿命同位素,从而成功完成了Db(Z=105)及Sg(Z=106)的模型试验。

Prototype of the Superferric Dipoles for the Super-FRS of the FAIR-Project

The FAIR China Group (FCG), consisting of the Institute of Modern Physics (IMP Lanzhou), the Institute of Plasma Physics (ASIPP, Hefei) and the Institute of Electric Engineering (IEE, Beijing) developed and manufactured in cooperation with GSI, Germany a prototype of a superferric dipole for the Super-Fragment-Separator of the FAIR-project [1]. The dipole magnets of the separator will have a deflection radius of 12.5 m, a field up to 1.6 T, a gap of at least 170 mm and an effective length of more than 2 meters to bend ion beams with a rigidity from 2 T . m up to 20 T . m. The magnets operate at DC mode. These requirements led to a superferric design with a yoke weight of more than 50 tons and a maximum stored energy of more than 400 kJ. The principles of yoke, coil and cryostat construction will be presented. We will also show first results of tests and measurements realized at ASIPP and at IMP.