厚朴中α-葡萄糖苷酶抑制活性成分研究

本论文由三章组成。 第一章是关于厚朴中具有α-葡萄糖苷酶抑制活性成分的研究。凹叶厚朴的乙醇提取物显示了较强的α-葡萄糖苷酶抑制活性。为了确定其活性成分，在活性测试的指导下，通过溶剂萃取、树脂吸附和反复硅胶柱层析等分离方法从凹叶厚朴乙醇提取物中分离得到6 个生物碱，并用质谱和核磁共振等波谱方法分别鉴定为：木兰箭毒碱，木兰花碱，鹅掌楸碱，蕃荔枝碱，罗默碱和Lysicamine。应用小肠α-葡萄糖苷酶模型测定了它们对α-葡萄糖苷酶的抑制作用。其中，番荔枝碱和木兰箭毒碱对α-葡萄糖苷酶相对抑制活性最好，分别为60%和62%；其它四个生物碱成分对α-葡萄糖苷酶的抑制活性几乎相当，鹅掌楸碱为46%，罗默碱为51%，Lysicamine 为49%，木兰花碱为51%。 第二章报道了厚朴酚的衍生物及其对α-葡萄糖苷酶的抑制活性。根据糖苷酶抑制剂的结构特点，设计合成了一系列厚朴酚的衍生物。厚朴酚经过Mannich 反应和环氧化及开环反应制备了一系列衍生物，经活性测试发现衍生物活性与取代基关系较大，其中5,5′-diallyl-3-((bis(2-hydroxyethyl)amino)methyl)biphenyl-2,2′-diol 的抑制活性最高，为72%。 第三章综述了厚朴的化学成分及药理活性两个方面的研究进展。 The dissertation consists of three chapters. The first chapter is about the study on the constituents with α-glycosidase inhibitory activity from Magnolia officinalis. The EtOH extracts of M. officinalis Rehd. et Wils showed good inhibitory activity against α-Glucosidase. In order to determine the active compounds, bio-assay was used to guide the isolation. Six known alkaloids were isolated by solvent extraction and repeated silica gel column chromatography, and their structures were identified as liriodenine, anonaine, roemerine, lysicamine, magnoflorine and magnocurarine by spectroscopic methods. The inhibitory activity against α-Glucosidase of these alkaloids was measured with alvine screening model of α-glucosidase. Among them, lysicamine and liriodenine have the best inhibitory activity at 60% and 62%, respectively. The other four alkaloids have close inhibitory activity, from 46% to 51%. The second chapter is about the derivation of magnolol and the inhibitory a ctivity of the derivatives. Seven derivatives of magnolol were prepared by Manni-ch reaction, epoxidation followed by ring-opening reaction. Biological activity as say indicated the inhibitory activity was related to substituting groups. Among them, 5,5′-diallyl-3-((bis(2-hydroxyethyl)amino)methyl)biphenyl-2,2′-diol had the highest activity at 72%. The third chapter is a review on the progress of M. officinalis including chemical constituents and pharmacological activity.

Coking kinetics on the catalyst during alkylation of fcc off-gas with benzene to ethylbenzene

The production of ethylbenzene from the alkylation of dilute ethylene in fee off-gases with benzene has been commercialized in China over a newly developed catalyst composed of ZSM-5/ZSM-11 co-crystallized zeolite. The duration of an operation cycle of the commercial catalyst could be as long as 180 days. The conversion of ethylene could attain higher than 95%, while the amount of coke deposited on the catalyst was only about 10 wt.%. Thermogravimetry (TG) was used to study the coking behavior of the catalyst during the alkylation of fee off-gas with benzene to ethylbenzene. Based on effects of reaction time, reaction temperature, reactants and products on coking during the alkylation process, it is found that the coking rate during the alkylation procedure follows the order: ethylbenzene > ethylene > propylene > benzene for single component, and benzene-ethylene > benzene-propylene for bi-components under the same reaction condition. Furthermore, the coking kinetic equations for benzene-ethylene, benzene-propylene and ethylbenzene were established. (C) 2003 Elsevier B.V. All rights reserved.

Effect of acidity in TS-1 zeolites on product distribution of the styrene oxidation reaction

The role of Bronsted acidity of titanium silicalite zeolite (with different ratios of Si/Ti) in oxidation reactions of styrene has been investigated and discussed. For zeolites with Si/Ti > 42, most of the titanium is in the zeolite framework. These framework titanium species, which act both as the isolated titanium centers and as Bronsted acidity centers (together with the Bronsted acidity produced by the tetrahedral aluminum impurity introduced during synthesis), can catalyze both the epoxidation and the succeeding rearrangement reactions, thus promoting the formation of phenylacetaldehyde. With an increase in the titanium content of the zeolite, titanium will tend to stay outside the zeolite lattice, except for the TiOx nanophases which can be occluded in the zeolite channels or on the external surface. These non-framework titanium species are favorable for the carbon-carbon bond scission, leading to the production of additional benzaldehyde. The catalytic performances of these zeolites with different Si/Ti ratios are correlated here with their structural information by using solid-state NMR and UV-Vis methods. (C) 2003 Elsevier B.V. All rights reserved.

Chiral synthesis on catalysts immobilized in microporous and mesoporous materials

This paper reviews the recent progress made in the asymmetric synthesis on chiral catalysts in porous materials and discusses the effects of surface and pores on enantio-selectivity (confinement effect). This paper also summarizes various approaches of immobilization of the chiral catalysts onto surfaces and into pores of solid inorganic supports such as microporous and mesoporous materials. The most important reactions surveyed for the chiral synthesis in porous materials include epoxidation. hydrogenation, hydroformylation, Aldol and Diels-Alder reactions, etc. The confinement effect originated from the surfaces and the pores turns out to be a general phenomenon. which may make the enantioselectivity increase (positive effect) or decrease (negative effect). The confinement effect becomes more pronounced particularly when the bonding between the catalyst and the surface is more rigid and the pore size is tuned to a suitable range. It is proposed that the confinement in chiral synthesis is essentially a consequence of subtle change in transition states induced by weak-interaction in pores or on surfaces. It is also anticipated that the enantioselectivity could be improved by tuning the confinement effect based on the molecular designing of the pore/surface and the immobilized catalysts according to the requirements of chiral reactions.

Oxidative dehydrogenation of propane in a dense tubular membrane reactor

Oxidative dehydrogenation of propane (ODP) to propylene was investigated in a dense tubular membrane reactor made of Ba0.5Sr0.5Co0.8Fe0.2O3-delta (BSCF) at 700degreesC and 750degreesC. The propylene selectivity in the membrane reactor (44.2%) is much higher than that in the fixed-bed reactor (15%) at the similar propane conversion (23-27%). Higher propylene selectivity in the membrane reactor was attributed to the lattice oxygen (O2-) supplied through the membrane.

Synthesis and luminescence properties of hybrid organic-inorganic transparent titania thin film activated by in-situ formed lanthanide complexes

Stable transparent titania thin films were fabricated at room temperature by combining thenoyltrifluoroacetone (TTFA)-modified titanium precursors with amphiphilic triblock poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO, P123) copolymers. The obtained transparent titania thin films were systematically investigated by IR spectroscopy, PL emission and excitation spectroscopy and transmission electron microscopy. IR spectroscopy indicates that TTFA coordinates the titanium center during the process of hydrolysis and condensation. Luminescence spectroscopy confirms the in-situ formation of lanthanide complexes in the transparent titania thin film.

Mass transfer resistance in the production of high impact polypropylene

Mass transfer resistance in the production of high impact polypropylene (hiPP) produced by a two-stage slurry/gas polymerization was investigated by field-emission scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques. It is found that the formation of ethylene-propylene copolymer (EPR) phases in polypropylene (iPP) particle produced in the first stage slurry polymerization exhibits a developing process from exterior to interior

Thermal properties and crystallization behavior of ultrafine fully-vulcanized powdered rubber particle toughened polypropylene

Thermal properties and crystallization-behavior of ultrafine fully-vulcanized powdered rubber (UFPR) toughened poly propylene (PP) were studied by Differential scanning calorimetry (DSC) and Wide angle X-ray diffraction (WAXD) measurements. It was found that the fraction of beta-form in the PP crystal increased at first, then sharply deceased up to zero with increasing UFPR content

Rare-earth-metal mixed hydride/aryloxide complexes bearing mono(cyclopentadienyl) ligands. Synthesis, CO2 fixation, and catalysis on copolymerization of CO2 with cyclohexene oxide

Hydrogenolysis of mono(cyclopentadienyl)-ligated rare-earth-metal bis(alkyl) complexes Cp'Ln-(CH2SiMe3)2(THF) (Ln = Y (1a), Dy (1b), Lu (1c); Cp' = C5Me4SiMe3) with PhSiH3 afforded the mixed hydride/alkyl complexes [Cp'Ln(mu-H)(CH2SiMe3)(THF)](2) (Ln = Y (2a), Dy (2b), Lu (2c)). The overall structure of complexes 2a-c is a C-2-symmetric dimer containing a planar symmetric Ln(2)H(2) core at the center of the molecule. Deprotonation of ArOH (Ar = C6H2-Bu-t(2)-2,6-Me-4) by the metal alkyl group of 2a-c led to formation of the mixed hydride/aryloxide derivatives [Cp'Ln(mu-H)(OAr)](2) (Ln = Y (3a), Dy (3b), Lu (3c)), which adopt the dimeric structure through hydride bridges with trans-accommodated terminal aryloxide groups.

Syntheses, structures and reactions of a series of beta-diketiminatoyttrium compounds

This paper describes the synthesis and selected reactions of a series of crystalline mono(beta-diiminato) yttrium chlorides 3a, 3b, 4a, 4b, 5a, 5b, 5c and 9. The X-ray structure of each has been determined, as well as of [YCl(L-4)(2)] (6), [Y(L-1)(2)OBut] (7) and [Y{CH(SiMe3)(2)}(thf)(mu-Cl)(2)Li(OEt2)(2)(mu-Cl)](2) (8).