Vitrification of Yunnan Yellow Cattle oocytes: work in progress

The objective of this study was to provide a simple cryopreservation method for oocytes from Yunnan Yellow Cattle and facilitate preservation efforts in this native Chinese breed, which is threatened by agricultural modernization. Cumulus-oocyte complexes (COCs) were collected from slaughterhouse ovaries and matured in vitro for 22-24 h, then selected for cryopreservation. Vitrification in open pulled straws (OPS) or in microdrops on a cooled metal surface (solid surface vitrification, SSV) was compared. The OPS vitrification solution consisted of 20% ethylene glycol (EG) and 20% DMSO. The SSV solution was a mixture of 35% EG, 5% polyvinyl-pyrrolidon (PVP) and 0.4 M trehalose. Vitrified and warmed oocytes were either fertilized in vitro or parthenogenetically activated. The rates of cleavage and development to blastocysts of fertilized oocytes following OPS versus SSV were not statistically different (38.3 and 12.5% versus 35.8 and 6.0%, respectively). The corresponding rates of parthenogenetic development to blastocysts were also not different (8.2 versus 3.5%, respectively). Development to blastocysts of non-vitrified controls following fertilization was significantly higher than that of the vitrified oocytes (22.6%, P < 0.05). These results demonstrate for the first time, that although both OPS and SSV procedures reduced embryonic development, Yunnan Yellow Cattle oocytes are capable of developing to blastocysts following cryopreservation. (C) 2002 Elsevier Science Inc. All rights reserved.

Effects of various extenders and permeating cryoprotectants on cryopreservation of cynomolgus monkey (Macaca fascicularis) spermatozoa

The cryoprotective effects of 11 different extenders, TTE, DM, mDM, LG-DM, G-DM, TCG, TEST, TSM, Test-M, Test-H, and LM, on sperm cryopreservation of cynomolgus monkey (Macaca fascicularis) have been compared with glycerol as cryoprotectant. Sperm motility, plasma membrane, and acrosomal integrity were examined to evaluate frozen-thawed sperm function. The results showed that TTE, DM, mDM, LG-DM, G-DM, and TCG exhibited the best and similar protective efficiencies for cynomolgus monkey sperm cryopreservation in terms of sperm motility and plasma membrane integrity (P > .05). The acrosomal integrity for spermatozoa cryopreserved in TCG was statistically lower than that of TTE, DM, mDM, LG-DM, and G-DM (P < .05) but was significantly higher than that of TEST, TSM, Test-M, Test-H, and LM (P < .05). The postthaw sperm motility for 5 other extenders (TEST, TSM, Test-M, Test-H, and LIVI) did not exceed 30%, and the 3 sperm parameters evaluated for them were significantly lower than that of TTE, DM, mDM, LG-DM, G-DM, and TCG (P < .05). On the basis of these findings, 5 commonly used permeating cryoprotectants, glycerol, ethylene glycol, dimethyl sulfoxide, acetamide and propylene glycol have further been tested for their effectiveness on sperm cryopreservation in extenders of TTE, DM, mDM, LG-DM, G-DM, and TCG. The results showed that the sperm cryoprotective efficiencies of glycerol and ethylene glycol were similar and best among 5 permeating cryoprotectant treatments (P > .05). Dimethyl sulfoxide or acetamide resulted in average cryoprotection for cynomolgus monkey spermatozoa: poorer than glycerol or ethylene glycol but better than that of propylene glycol (P < .05). In addition, the action of permeating cryoprotectant appeared to be independent of extenders. The results in the present study demonstrate that 1) TTE, DM, mDM, LG-DM, G-DM, and TCG are excellent extenders and suitable for cynomolgus monkey sperm cryopreservation; 2) the mechanism of action of permeating cryoprotectants are not affected by extender composition; 3) ethylene glycol has a similar cryoprotective efficacy to glycerol that makes it a successful cryoprotectant for sperm cryopreservation in cynomolgus monkeys.

The application of SnS nanoparticles to bulk heterojunction solar cells

Tin mono-sulphide (SnS) nanoparticles were synthesized by a facile method. Reactions producing narrow size distribution SnS nanoparticles with the diameter of 5.0-10 nm were carried out in an ethylene glycol solution at 150 degrees C for 24 h. Bulk heterojunction solar cells with the structure of indium tin oxide (ITO)/polyethylenedioxythiophene polystyrenesulphonate (PEDOT PSS)/SnS polymer/Al were fabricated by blending the nanoparticles with a conjugated polymer to form the active layer for the first time. Current density-voltage characterization of the devices showed that due to the addition of SnS nanoparticles to the polymer film, the device performance can be dramatically improved, compared with that of the pristine polymer solar cells. (c) 2009 Published by Elsevier B.V.

Molecular Dynamics Simulation on Characteristics of Decomposition of Methane Hydrate in the Presence of Hydrogen Peroxide Solution

In this work, the characteristics of the decomposition of methane hydrate Structure I (SI) in the presence of hydrogen peroxide solution is investigated using the molecular dynamics simulation. The mechanism of the transformation process from the solid hydrate to the liquid is analyzed with the effect of hydrogen peroxide (HP) solution. In addition, the effect of ethylene glycol (EG) with the same molar concentration with HP on the methane hydrate dissociation is also studied. The results illustrate that both HP and EG promote well the hydrate dissociation. The work provides the important reference value for the experimental investigation into the promotion effect of HP on the hydrate dissociation.

Molecular Dynamics Simulation of Methane Hydrate Dissociation Process in the Presence of Thermodynamic Inhibitor

The dissociation of methane hydrate in the presence of ethylene glycol (11.45 mol.L-1) at 277.0 K was studied using canonical ensemble (NVT) molecular dynamics simulations. Results show that hydrate dissociation starts from the surface layer of the solid hydrate and then gradually expands to the internal layer. Thus, the solid structure gradually shrinks until it disappears. A distortion of the hydrate lattice structure occurs first and then the hydrate evolves from a fractured frame to a fractional fragment. Finally, water molecules in the hydrate construction exist in the liquid state. The inner dissociating layer is, additionally, coated by a liquid film formed from outer dissociated water molecules outside. This film inhibits the mass transfer performance of the inner molecules during the hydrate dissociation process.

高分子溶液中物理凝胶化的Monte Carlo模拟和小角中子散射研究

高分子凝胶广泛地存在于自然界以及日常生活中，按其形成作用力不同分为化学凝胶和物理凝胶两大类。由于高分子物理凝胶具有凝胶化的可逆性及其对环境条件强烈的响应性，因此，在近半个世纪的研究与应用中受到极大的关注。高分子溶液中的物理凝胶因其结构及形成机制复杂，在实验方面，除了散射技术及流变技术能够有效地揭示它的部分信息外，其它的实验手段很难用于这个领域的研究；在理论方面，化学凝胶的理论已经比较成熟，而物理凝胶的粘弹性质以及凝胶化是一个远离平衡态的松弛过程，除了一些特征的标度指数外，人们还没有得到适用于高分子物理凝胶的普适规律。当前，由于计算机模拟理论及模拟方法的发展，使得计算机模拟成为除了实验和理论研究方法之外的第三个重要的研究方法。但是，由于物理凝胶化行为的复杂性，用实验和理论获得的信息很难较好地描述凝胶化过程，而计算机模拟的高度透明性及反映信息的完整性，有助于理解这一复杂过程中所涉及的物理本质。因此，利用计算机模拟结合实验及理论方法深入研究高分子物理凝胶的形成机制、结构与性能关系已成为目前最有效的手段之一。 本论文主要运用Monte Carlo模拟方法，并结合小角中子散射（Small-Angle Neutron Scattering, SANS）和流变（Rheology）等实验手段从多个角度探讨了以下几类典型的高分子溶液物理凝胶化行为。 1. 温度对遥爪型三嵌段共聚物在选择性溶剂中的自组装及凝胶化行为影响的研究：采用二维简单方格子Monte Carlo模拟方法，结合逾渗（Percolation）理论，建立了溶胶－凝胶转变相图在统计热力学中的确定方法；甄别了具有特征构象的链，讨论了链及胶束的聚集，明晰了相互作用（体现为约化温度）、构象转变、聚集与凝胶化的一致的关联关系；提出了构象转变模型，进而明确了此体系的凝胶化过程，在微观尺度上表现为桥型链和环型链之间的竞争。 2. 模拟模型改进及其应用到持续长度对稀溶液中高分子链构象影响的研究：考虑到原始八位置键涨落模型效率低，实现复杂且不能应用到复杂的高分子体系，对该模型进行了改进，使其实现简单、效率高，并拓宽了该模型的应用范围。然后，以刚性对均聚物构象的影响为例，发现随着刚性增加，均聚物构象从球形椭球到棒状椭球的转变，并对比了自由连接链（Free Joint Chain, FJC）模型和蠕虫链（Wormlike Chain, WLC）模型在不同刚性范围内对高分子链末端距预测的偏差，首次给出了这两个经典模型的半定量的适用边界。 3. 溶剂尺寸对遥爪型三嵌段共聚物在选择性溶剂中的自组装及凝胶化行为影响的研究：用改进后的八位置键涨落Monte Carlo模型，研究了遥爪型三嵌段共聚物在选择性溶剂条件下的聚集和凝胶化对溶剂尺寸的依赖性，发现溶剂尺寸效应对凝胶化的作用是非单调的。由一个均聚物体系的对比模拟证明这种作用主要是由熵驱动的，并给出了中分子溶剂的半定量定义。在均聚物和嵌段共聚物溶液中，不同尺寸的溶剂分子可以使溶液由于高分子聚集不同而具有不同的微结构，并影响高分子链构象和溶液的性质。从多个角度研究了三嵌段共聚物在不同尺寸溶剂的溶液中所遵循的三种不同的凝胶化机理。 4. 聚氧化乙烯－氧化丙稀－氧化乙烯三嵌段共聚物（poly(ethylene oxide)-poly (propylene oxide)-poly-(ethylene oxide), PEO-PPO-PEO）重水溶液凝胶化的小角中子散射（SANS）和Monte Carlo研究：结合Pluronic F127（EO65PO99EO65）/D2O三嵌段共聚物溶液的特征，对照SANS数据，用改进后的八位置键涨落模型成功地从模拟中获得了F127/D2O的溶胶－凝胶转变相图。详细地考察了体系的微观结构，提出此类高分子溶液中形成的物理凝胶包含高分子逾渗网络的生成，以及被束缚溶剂（Bound Solvent）必须超过离散组分体系逾渗的临界体积分数的机理。着重研究了一定浓度的F127水溶液随温度升高引起的溶胶－凝胶转变以及凝胶－溶胶转变的Reentrant相行为，发现体系在低温区域的溶胶－凝胶转变遵循相同的机理，而在中等温度和较高温度以及不同浓度区域中的凝胶－溶胶转变遵循不同的机理。 5. 极性基团饱和度和溶剂条件对两亲性聚合物在溶液中的聚集行为和凝胶化影响的研究：用改进后的八位置键涨落模型，针对两亲性聚合物在不同溶剂条件的溶液建立了粗粒化模型，以两亲性聚合物中极性基团的饱和度，溶剂条件和高分子浓度为变量，考察了其对链构象、聚集及其凝胶化的影响。 6. 多糖水溶液凝胶化的流变和小角中子散射研究：用流变和SANS考察了两个多糖水溶液中物理凝胶化过程，针对由氢键主导的水基凝胶体系的典型特征进行了讨论，从分子链构象，聚集体结构及其关联以及流变特征等方面对聚强电解质角叉胶（Carrageenan）水溶液和聚弱电解质明胶（Pectin）水溶液进行了详细的讨论。考察了不同多糖的种类（聚合物链的电荷密度），盐的种类和浓度，溶液温度等对凝胶化和凝胶结构的影响，分析了不同多糖溶液的凝胶化机理。

可生物降解的两亲性嵌段共聚物的自聚集行为研究

可生物降解的两亲性嵌段共聚物PLA-PEG飞所制备的胶束或纳术粒子，作为潜在的药物控制释放体系弓！起人们广泛的兴趣。，方们授有寿比山于PEG链的空间位阴．效应可以避免单核噬菌体的吞噬，、并且可以通过控制可降解部分的降解行为实现药物的持续释放，使在微载体内所包载的药物分子持续释放出来。尽管高聚物的胶束和纳米粒子作为药物的胶体载体已作厂泛研究，但是对其本身物理化学性质与应用之间的联系研究甚少。因此本文对一系列PLLA和PEG两嵌段和三嵌段共聚物的自聚集行为进行了细致研究，得到了以卜结论：1．以花为"模型药物"，通过荧光探针技术对一系列两亲性共聚物在水呀招夜和NaCI溶液种的胶束化行为进行了研究。这些共聚物是由一种新型氨钙催化利，以人分J，的聚乙二醇（PEG）为引发剂，引发丙交酷开环聚合得到，，其中囚定长度阴 PEG段分剐为44，104和113环氧乙烷早兀，PLLA的长没在15-280乳酸中元之间。由于氨钙准活性的特点，这些共聚物的分散度较低，均在1.1-1.3之间。其临界胶束浓度cmc发现随PLLA的含量增加I荆氏。具有同一PEG长度的两嵌段和三嵌段共聚物cmc值的截然差别为它们胶束的构型不同提供了证据。同时也发现了NaCI的加入对丫EG段和争LLA段较短洪聚物的cmc的降低有明掀笋作用，而对具有较长PEG段或较长PLLA段的共聚物的cmc基本上没有什么影响。2．通过荧光探余十技术测定花在这一系列共聚物胶束溶液锄勺配分系数在0.2*10~5至1.9*10~5之间，对于同-PEG段的共聚物，花在其胶柬相中的配分系数随PLLA的含量的增加而增加。另外发现NaCl的加入能够促进花在胶束相中的配分。3．通过透射电子显微镜研究了两嵌段共聚物水溶液胶束的形貌，发现胶束的粒径和分散度均随PLLA段的增加而增加：通过原子力显微镜研究"这些纳米粒子退火前后的形貌变化，发现退火后纳米粒子重新自聚集为类似于神经网络红脚乏的"纳米条带"结构，其中心为类似"神经元"的团簇结构，而周困为支化的车由突"分支结构，这与文献上提到的只有三嵌段共聚物能够形成支化的"纳米条带"结构截然不同，其自聚集机理在进，步研究之中。4．以亲水性的荧光素为荧光探针研究了两嵌段共聚物在甲苯中的胶束化行为，发现其clnc值随PLLA段的含量增加而降低，相对于PEG段，PLLA段在其胶宋化过程中起主要作用。通过1HNMR证明两嵌段共聚物在甲苯中的胶束具伯以PLLA段为"核"、PEG段为"壳"的"核-壳"结构，这种胶柬化行为通过溶解度参数的差异进行了解释。5.通过原子力显微镜发现，当这些胶束滴加在云母表面上经过热处理后，这些胶束重新自聚集成为规则的具有平缓隆起的纳米结构，这与由水中得到的胶柬热处理后的形貌截然不同，并对此进行了进一步解释。由XPS分析认为主要是PEG段覆盖在PLLA段表面。

聚甲基丙烯酸多缩乙二醇二酯－锂盐－溶剂三组份凝胶聚合物电解质的制备、导电性能和导电机理研究

由极性聚合物-碱金属盐构成的聚合物固体电解质（SPE）是一类很有前途的离子导电材料。但此类SPE，比通常非水介质电解质溶液约低3个数量级，故极需发展电导率更高的新型SPE材料。目前，由极性（或交联）聚合物、碱金属盐和高介电常数溶剂三组份构成的新一代SPE正在崛起，其室温电导率的达10~（－3）S·cm~(-1)。本工作以甲基丙烯酸多缩乙二醇二酯为大分子单体，研究了三组份凝胶电解质的制备、各组分的变化和温度等对膜强度和电导率的影响；并研究了该凝胶体系中离子传导机理。

Effect of cryoprotectants on hatching rate of red seabream (Pagrus major) embryos

The objectives were to investigate the effect of cryoprotectants on the hatching rate of red seabream embryos. Heart-beat embryos were immersed in: five permeable cryoprotectants, dimethyl sulfoxide (DMSO), glycerol (Gly), methanol (MeOH), 1,2-propylene glycol (PG), and ethylene glycol (EG). in concentrations of 5-30% for 10, 30, or 60 min; and two non-permeable cryoprotectants: polyvinylpyrrolidone (PVP), and sucrose (in concentrations of 5-20% for 10 or 30 min). The embryos were then washed and incubated in filtered seawater until hatching occurred. The hatching rate of the embryos treated with permeable cryoprotectants decreased (P < 0.05) with increased concentration and duration of exposure. In addition, PG was the least toxic permeable cryoprotectant, followed by DMSO and EG, whereas Gly and MeOH were the most toxic. At a concentration of 15% and 30 min exposure, the hatching rate of the embryos immersed in PG was 93.3 +/- 7.0% (mean +/- S.D.), however. in DMSO. EG, Gly. and MeOH, it was 82.7 +/- 10.4, 22.0 +/- 5.7, 0.0 +/- 0.0, and 0.0 +/- 0.0%, respectively. Hatching rate of embryos treated with PVP decreased (P < 0.05) with the increase of concentration and exposure time, whereas for embryos treated with sucrose, there was no significant decrease in comparison with the control at the concentrations used. (C) 2008 Elsevier Inc. All rights reserved.

兔胚胎干细胞冷冻保存的研究

胚胎干细胞(embryonic stem cells, ES 细胞)起源于着床前胚胎内的细胞群，对 鼠ES 细胞研究已经有20 多年，但直到1998 年才首次报道从人的胚胎中获得ES 细胞，2006 年本实验室从兔体外受精胚胎的内细胞团分离建立了兔胚胎干细胞 系RF。ES 细胞是能在体外长期培养，高度未分化的全能细胞系，可在适合的条 件下分化为胎儿或成体的各种类型的组织细胞。根据这一特性，它们可用于再生 细胞或组织移植。胚胎干细胞的成功冻存是其应用于临床的前提。成功的冻存是 在冷冻、解冻和复苏培养过程中，细胞具有较高的存活率，且仍能保持胚胎干细 胞的自我更新和全能性的特性。目前除了小鼠ES 细胞用常规慢速冷冻方法可以 达到95%以上的未分化集落复苏率外(Yao & Yuan, 2005)，其它物种尤其是灵长 类的许多ES 细胞系用常规慢速冷冻方法的复苏率极低，极大地限制了这些细胞 的临床应用。为提高兔胚胎干细胞RF 在慢速冷冻中的保存效果, 本研究比较了 二甲基亚砜(DMSO)和乙二醇（ethylene glycol，EG）对兔胚胎干细胞冷冻保护效 果。对冷冻复苏后的细胞进行台盼蓝染色，并研究其胚胎干细胞的分子特性，结 果表明， DMSO 比EG 具有更好的冷冻保护效果。再在以10% DMSO 为基础的 防冻液中添加膜稳定剂海藻糖或谷氨酰胺，细胞冷冻复苏后结果显示, 谷氨酰胺 对兔胚胎干细胞有明显的冷冻保护作用，使细胞存活率从71%提高到83.7%。当 谷氨酰胺浓度为0、5、10、20、40mmol/L 分别加入防冻液中后，20mmol/L 的 谷氨酰胺具有最佳的冷冻保护效果。以上结果得出兔胚胎干细胞慢速冷冻的防冻 液改进配方为：胚胎干细胞培养液中添加10% DMSO+20 mmol/L 谷氨酰胺.

运用含有偶氮苯的自组装单层膜在光化学条件下可逆地控制细胞黏附

细胞生物学研究的一个重要方向是动态地控制细胞在基底上的黏附。最近，随着表面化学的研究深入，尤其是对烷基硫醇在金基底上形成自组装单层膜（self-assembled monolayers, SAMs）这一体系的研究，使得人们能在分子水平的表面上控制细胞黏附。精氨酸-甘氨酸-天冬氨酸（arginine-glycine-aspartate, RGD）序列首先是从细胞外基质蛋白中分离出来的，能够识别并非共价结合细胞膜表面的整合素受体，从而促进细胞黏附。以前的一些工作已经证实，将含有RGD的肽链连接到SAMs表面之后，能够生物特异性地黏附动物细胞。已有的手段比如光照、电压、加热、微电极、微流控以及表面纳米形貌的梯度变化，都不能真正实现可逆地控制细胞黏附，原因是这些方法所用的化学有限；这些方法也不能得到完全抗拒细胞黏附的表面，原因是这些方法产生的表面缺陷等不完整。用两种不同波长的光（紫外光和可见光）照射偶氮苯，偶氮苯会发生可逆的光致异构变化，因此，偶氮苯的光致异构性质可以用来可逆地控制细胞在表面黏附。运用含有偶氮苯的混合SAMs，偶氮苯的末端连接GRGDS肽，混合SAMs中是以末端为六聚乙二醇的硫醇为背景，该SAMs修饰而成的表面能够黏附或者抗拒细胞黏附，其表面黏附性质取决于SAMs中偶氮苯的构象。该方法提供了一种在分子水平的表面上我们所了解到的唯一能可逆控制细胞黏附的方法，该方法需要用到的光源来自于标准荧光显微镜所配置的汞灯。 为了实现在金基底表面可逆的控制细胞黏附，我们合成了如下三个化合物： 由于化合物1的溶解性很差，几乎在所有溶剂里都不溶，所以不能直接用化合物1制备SAMs；化合物2能高效地抗拒细胞的黏附；化合物3的偶氮苯末端是活化酯，能够连接GRGDS肽，从而控制细胞黏附。 将化合物2和化合物3以一定的比例均匀混合在金基底表面形成SAMs，然后将GRGDS肽连接到偶氮苯(反式)的末端（通过GRGDS肽的甘氨酸上的伯胺基与偶氮苯末端的活化酯反应），从而得到细胞黏附的表面。用紫外光照射该细胞黏附表面5-10小时，随着偶氮苯的构象由反式变为顺式，偶氮苯末端的GRGDS肽淹没在化合物2的六聚乙二醇中，得到抗拒细胞黏附的惰性表面。再用可见光照射该惰性表面1个小时，随着偶氮苯的构象由顺式变为反式，原先埋没在六聚乙二醇中的GRGDS肽伸展至单层膜的末端，又得到了细胞黏附的表面。因此，该表面能完全可逆地控制细胞在金表面黏附。 An important area in cell biology is the dynamic control of cell adhesion on substrates. Recent advancements in surface chemistry, in particular, self-assembled monolayers (SAMs) of alkanethiols on gold substrates, have permitted unprecedented control of cell adhesion via molecularly defined surfaces. The tri-peptide sequence arginine-glycine-aspartate (RGD), initially isolated from the extracellular matrix (ECM) proteins, can recognize and non-covalently bind with integrin receptors on cell membranes to promote cell adhesion. Some previous work has demonstrated that RGD peptide grafted on SAMs can allow bio-specific adhesion of mammalian cells that mimic natural adhesion. Existing technologies such as light, voltage, heat, microelectrodes, microfluidic systems and surface gradient of nanotopography, either cannot realize fully reversible control of cell adhesion, due to the limitation in the chemistry used, or cannot yield a surface completely resistant against cell adhesion, due to the imperfection of surfaces. Azobenzenes undergo reversible photo-induced isomerization rapidly at two different wavelengths of light (UV and visible light), it therefore potentially allows the reversible control of cell adhesion on a surface. By using a mixed SAMs presenting azobenzene groups terminated in GRGDS peptides in a background of hexa(ethylene glycol) groups, the surface can either accommodate or resist cell adhesion depending on the conformation of the azobenzene embedded in SAMs. This method provides the only means we know to control cell adhesion reversibly on a molecularly well-defined surface by using light generated by a mercury lamp equipped on standard fluorescence microscopes. To realize the reversible control of cell adhesion on gold surface, we synthesized three kinds of compounds as following, We found that it was difficult to obtain SAMs directly from compound 1 because of its poor solubility in almost all kinds of solvents; compound 2 can resist cell adhesion efficiently; compound 3 presents an azobenzene terminated with NHS-activated ester, which can couple with a GRGDS peptide to control cell adhesion. After coating a gold surface with compound 2 and 3 in appropriate ratios to form a SAM followed by coupling the GRGDS peptides with NHS-activated esters at the end of azobenzene (E configuration) resulted in a cell-adhesive SAM. Irradiating this cell-adhesive SAM with UV light for 5-10 h converted the E configuration of azobenzene into the Z form, the GRGDS peptides becoming masked in the PEG, resulting in a cell-resistant surface. These SAM could again support cell adhesion as a result of the conformational switch of azobenzene from Z to E with the irradiation of visible light for 1 h. This surface, therefore, allows completely reversible control of cell adhesion on a gold surface.

Preparation and characterization of multiwalled carbon nanotube-supported platinum for cathode catalysts of direct methanol fuel cells

Multiwalled carbon nanotube-supported Pt (Pt/MWNT) nanocomposites were prepared by both the aqueous solution reduction of a Pt salt (HCHO reduction) and the reduction of a Pt ion salt in ethylene glycol solution. For comparison, a Pt/XC-72 nanocomposite was also prepared by the EG method. The Pt/MWNT catalyst prepared by the EG method has a high and homogeneous dispersion of spherical Pt metal particles with a narrow particle-size distribution. TEM images show that the Pt particle size is in the range of 2-5 nm with a peak at 2.6 nm, which is consistent with 2.5 nm obtained from the XRD broadening calculation. Surface chemical modifications of MWNTs and water content in EG solvent are found to be the key factors in depositing Pt particles on MWNTs. In the case of the direct methanol fuel cell (DMFC) test, the Pt/MWNT catalyst prepared by EG reduction is slightly superior to the catalyst prepared by aqueous reduction and displays significantly higher performance than the Pt/XC-72 catalyst. These differences in catalytic performance between the MWNT-supported or the carbon black XC-72-supported catalysts are attributed to a greater dispersion of the supported Pt particles when the EG method is used, in contrast to aqueous HCHO reduction and to possible unique structural and higher electrical properties when contrasting MWNTs to carbon black XC-72 as a support.