Cd、Pb、Cu、Zn、As复合污染在农田生态系统的迁移动态研究

１９９０—１９９５年中国科学院生态网站联网研究中，在４个生态站对重金属复合污染（Ｃｄ、Ｐｂ、Ｃｕ、Ｚｎ、Ａｓ）进行了田间迁移动态实验研究，表明３年来表土中重金属元素含量缓慢下降，输出量最大支出项目为从表层向下迁移量可比作物地上部分带去量高出几十至数百倍，为污染土壤防治工作中淋洗技术运用指出了应用前景．

Cd~(2+)、Pb~(2+)在根际和非根际土壤中的吸附-解吸行为

采用1次平衡法对Cd2+、Pb2+在小麦根际和非根际土壤中的吸附-解吸行为进行比较研究.结果表明,根际土对Cd2+和Pb2+的吸附能力高于非根际土,2类土壤对Cd2+的吸附等温线与Freundlich方程有较好的拟合性,Pb2+的等温吸附过程可由Langmuir方程与Freundlich方程来描述.双常数方程是描述根际、非根际土Cd2+和Pb2+吸附动力学行为的最优模型,其次为Elovich方程,最差模型是一级动力学方程.Cd2+、Pb2+的解吸存在滞后现象,相比于非根际土,根际土吸附态Cd2+、Pb2+的解吸率更低,Cd2+、Pb2+的解吸量与其初始吸附量之间的关系符合2次幂方程.2类土壤Cd2+、Pb2+的解吸速率随重金属初始浓度的增加而增加,随解吸时间的延长而不断降低.描述根际和非根际土Cd2+、Pb2+的解吸动力学过程的最优模型均为双常数方程,其次为Elovich方程,一级动力学方程拟合效果不佳.

Cd-Pb复合污染条件下3种花卉植物的生长反应及超积累特性研究

采用水培实验方法,研究了3种耐性较强的花卉植物在Cd-Pb复合污染条件下的生长反应及可能的超积累特性.结果表明,花卉植物种不同,其对复合污染的生长反应也不同,它们的耐性大小顺序为蜀葵(AlthaearoseaCav.)>凤仙花(ImpatiensBalsaminaL.)>金盏菊(CalendulaofficinalisL.);Cd对植物生长的影响较大、Pb的影响相对较小.3种花卉植物对重金属的积累量都是根部大于地上部;蜀葵对重金属Cd具有很强的耐性和积累性,在Cd、Pb复合污染条件下极具植物修复的潜力.对于这3种花卉植物,Cd-Pb相互作用效应与多种因素有关,包括重金属之间的浓度组合、植物种和植株部位等,表现得极为复杂,不仅仅是单纯的加和、拮抗或协同作用.

Analysis of sulfur-containing compounds in crude oils by comprehensive two-dimensional gas chromatography with sulfur chemiluminescence detection

This paper reports an analytical method for separating, identifying, and quantifying sulfur-containing compounds in crude oil fraction (IBP-360degreesC) samples based on comprehensive two-dimensional gas chromatography coupled with a sulfur chemiluminescence detector. Various sulfur-containing compounds and their groups were analyzed with one direct injection. 3620 peaks were detected including 1722 thiols/thioethers/ disulfides/1-ring thiophenes, 953 benzothiophenes, 704 dibenzothiophenes, and 241 benzonaphthothiophenes. The target sulfur compounds and their groups were identified based on the group separation feature and structured retention of comprehensive two-dimensional gas chromatography as well as standard substances. The quantitative analysis of major sulfur-containing compounds and total sulfur was based on the linear response of the sulfur chemiluminescence detector using the internal standard method. The sulfur contents of target sulfur compounds and their groups in 4 crude oil fractions were also determined. The recoveries for standard sulfur-containing compounds were in the range of 90-102%. The quantitative result of total sulfur in the Oman crude oil fraction sample was compared with those from ASTM D 4294 standard method (total S by X-ray fluorescence spectrometry), the relative deviation (RD%) was 4.2% and the precision of the method satisfactory.

Hydrothermal synthesis and characterization of microporous crystals of trivalent metal-containing zirconium phosphates

Two organically templated trivalent metal-containing crystalline zirconium phosphate materials FeZrPO-8 and AlZrPO-8 have been prepared hydrothermally by using fluoride as a mineralizer, and 1,6-diaminohexane (DAH) as templates. The powder XRD patterns indicate that the as-synthesized products are new materials. Substitutions of Al3+ or Fe3+ into Zr4+ sites were confirmed by a combination of powder X-ray diffraction (XRD) and nuclear magnetic resonance (NMR) studies. The thermal behavior of the title compounds have been investigated using TG-DTA and X-ray thermodiffractometry, which indicated that the inorganic framework of the compounds are thermally stable up to similar to400 degreesC. (C) 2004 Elsevier B.V. All rights reserved.

Characterization of metal-containing molecular sieves and their catalytic properties in the selective oxidation of cyclohexane

Three types of metal-containing molecular sieves with AFI, AEL and CHA structures (Me = Co, Mn, Cr and V) were synthesized hydrothermally and characterized by XRD, XRF, TG, TPR, NH3-TPD and FT-IR. It was revealed that metals were incorporated into the framework of molecular sieves and induced the presence of charge centers. Both cobalt and manganese in the framework of AIPO-5, AlPO-11 and SAPO-34 were not reducible before the structure collapse. The redox behaviours of these catalysts in cyclohexane oxidation at 403 K using O-2 as oxidant were examined. CoAPO-11 exhibited best activity and good selectivities for the monofunctional oxidation products (88.5%). Cyclohexanol was the major product over most catalysts, whereas for Cr-containing molecular sieves, high selectivity of cyclohexanone was observed. Investigation of reaction mechanism based on CoAPO-11 and CrAPO-5 catalysts indicated that the decomposition of cyclohexyl hydroperoxide (CHHP), the intermediate in cyclohexane oxidation, followed the pathway: cyclohexanone <-- CHHP --> cyclohexanol -->cyclohexanone. (C) 2004 Elsevier B.V. All rights reserved.

A study of shear viscosity of interfacial films containing alkyl metal phosphates

Experimental data are presented to show the influence of alkyl metal phosphates, Shengli resin fraction, and NaCl, on the shear viscosity of interfacial films and the stability of emulsions. It was found that the alkyl metal phosphates and the Shengli resin fraction could enhance the shear viscosity of interfacial films and the stability of emulsions. NaCl (0.01-0.03 mol L-1) could change the shear viscosity of interfacial films containing alkyl metal phosphates and the Shengli resin fraction. The shear viscosity of interfacial films containing ethyl iron phosphate and the Shengli resin fraction decreased with the increase of the concentration of NaCl. On the other hand, NaCl could decrease the stability of the emulsions. (C) 2004 Elsevier B.V. All rights reserved.

Hydrothermal stability and catalytic activity of aluminum-containing mesoporous ethane-silicas

Aluminum was incorporated into the mesoporous framework of ethane-silica by one-pot condensation of Al(OiPr)(3) with 1,2-bis(trimethoxysilyl)ethane using octadecyltrimethylammonium chloride as surfactant. Powder X-ray diffraction patterns, nitrogen sorption analysis, and TEM results reveal the formation of an ordered mesoporous material with uniform porosity. Al-27 MAS NMR confirms the incorporation of aluminum in the framework. The synthesized materials exhibit extremely high hydrothermal stability in boiling water (no obvious change of mesostructure and textural properties was observed even after refluxing in water for 100 h), which could be mainly contributed to the ethane-bridged mesoporous framework. The aluminum-containing mesoporous ethane-silicas are efficient catalysts for the alkylation of 2,4-di-tert-butylphenol by cinnamyl alcohol to yield a flavan.

Molybdenum containing surface complex for olefin epoxidation

Silica-supported molybdenum surface complexes were prepared by the reaction between (N=) Mo(OtBu)(3) and silica via displacement of the tert-butoxy ligands for siloxyls from the silica surface. The structure of the surface molybdenum complexes was well defined by in-situ FT-IR, elemental analysis, H-1 NMR and C-13 CP/MAS NMR techniques. The surface complexes could undergo alcoholysis reaction with CD3OD and CH3OH in the same way as free (N =) Mo(OtBu)(3) and they show high catalytic activity and selectivity in olefin epoxidation. Initial rates up to 24.9 mmol epoxide (mmol Mo)(-1) min(-1) were achieved in the epoxidation of cyclohexene using TBHP as oxidant.