Crystallization behavior of a novel poly(aryl ether ketone): PEDEKmK

Isothermal melt and cold crystallization kinetics of PEDEKmK linked by meta-phenyl and biphenyl were investigated by differential scanning calorimetry in two temperature regions. Avrami analysis is used to describe the primary stages of the melt and cold crystallization, with exponent n = 2 and n = 4, respectively. The activation energies are -118 kJ/mol and 510 kJ/mol for crystallization from the melt and the glassy states, respectively. The equilibrium melting point T-m(0) is estimated to be 309 degrees C by using the Hoffman-Weeks approach, which compares favorably with determination from the Thomson-Gibbs method. The lateral and end surface free energies derived from the Lauritzen-Hoffman spherulitic growth rate equation are sigma = 8.45 erg/cm(2) and sigma(e) = 45.17 erg/cm(2), respectively. The work of chain folding q is determined as 3.06 kcal/mol. These observed crystallization characteristics of PEDEKmK are compared with those of the other members of poly(aryl ether ketone) family. (C) 1997 John Wiley & Sons, Inc.

Plastic zone in front of mode I crack in phenolphthalein polyether ketone

The plastic zone size and crack opening displacement of phenolphthalein polyether ketone (PEK-C) at various conditions were investigated. Both of them increase with increasing temperature (decreasing strain rate), i.e. yield stress steadily falls. Thus, the mechanism increasing the yield stress leads to increased constraint in the crack tip and a corresponding reduction in the crack opening displacement and the plastic deformation zone. The effect of the plastic deformation on the fracture toughness is also discussed.

TEMPERATURE RATE DEPENDENCE OF YIELD AND FRACTURE-BEHAVIOR OF PHENOLPHTHALEIN POLY(ETHER KETONE)

The rate/temperature dependence of yield stress, tensile modulus and crack opening displacement of phenolphthalein poly(ether ketone) (PEK-C) has been investigated. The rate/temperature dependence of crack opening displacement and the correlation establis

DETERMINATION OF INITIATION VALUE OF MODE-I INTERLAMINAR FRACTURE-TOUGHNESS OF UNIDIRECTIONAL POLYMER COMPOSITES

The use of interlaminar fracture tests to measure the delamination resistance of unidirectional composite laminates is now widespread. However, because of the frequent occurrence of fiber bridging and multiple cracking during the tests, it leads to artificially high values of delamination resistance, which will not represent the behavior of the laminates. Initiation fracture from the crack starter, on the other hand, does not involve bridging, and should be more representative of the delamination resistance of the composite laminates. Since there is some uncertainty involved in determining the initiation value of delamination resistance in mode I tests in the literature, a power law of the form G(IC) = A.DELTA alpha(b) (where G(IC) is mode I interlaminar fracture toughness and DELTA alpha is delamination growth) is presented in this paper to determine initiation value of mode I interlaminar fracture toughness. It is found that initiation values of the mode I interlaminar fracture toughness, G(IC)(ini), can be defined as the G(IC) value at which 1 mm of delamination from the crack starter has occurred. Examples of initiation values determined by this method are given for both carbon fiber reinforced thermoplastic and thermosetting polymers.

Size hierarchies affecting the social interactions and growth of juvenile Japanese flounder, Paralichthys olivaceus

Japanese flounder Paralichthys olivaceus (T. & S.)juveniles were size-graded and divided into three groups (small, large, and mixture of small and large flounder), and their social interactions (feeding, aggressive attacking and activity) and growth were investigated. The growth of the small flounder was markedly suppressed by the presence of the large flounder. Large flounder did not significantly suppress the overall food intake of the small flounder but exhibited high aggressive attacking on them and consequently inhibited their activity. Size dominance showed little influence on the aggressive behavior, feeding, activity and growth of the large flounder. The large flounder could not effectively defend the food in excess during the experiments ruling out disproportional food acquisition as the primary mechanism responsible for the size hierarchy effect. Aggressive interaction of the large flounder on the small flounder might be an important cause for the growth retardation of the small flounder. In culture, size grading could markedly improve the growth and survival of the early juvenile flounder. (C) 2004 Elsevier B.V. All rights reserved.

Possible suppression of exogenous beta-1,3-glucanase gene gluc78 on rice transformation and growth

Three genes encoding for fungal cell wall degrading enzymes (CWDE), ech42, nag7O and gluc78 from the biocontrol fungus Trichoderma atroviride were transformed into rice mediated by Agrobacterium tumefaciens singly and in all possible combinations. A total of more than 1800 independently regenerated plantlets in seven different populations (for each of the three genes and each of the four gene combinations) were obtained. Our data indicated that gluc78 gene had negative effects on transformation frequency and plant growth. Some regenerated plants with gluc78 gene were stunted; spontaneously produced brown specks; could not tassel. The combination with either one of the two other genes (ech42, nag70) present in the same T-DNA region reduced the negative effect of gluc78 on plant growth. These results indicated that expression of several genes in one T-DNA region interfered with each other and expression of exogenous gene in recipient plant was a complex behavior. (c) 2007 Published by Elsevier Ireland Ltd.