中国化学肥料发展及其对农业的作用

回顾了中国化学肥料生产、应用的发展历程,探讨了由于化肥施用所引起的土壤养分平衡的变化;着重对稳定型肥料、复合肥和包膜肥三项新型肥料技术的研究进展进行了较为翔实的综述;基于我国化肥产业的现状,指出了我国化肥存在着品种结构不合理、投入量低、化肥资源配置不合理、养分投入比例不平衡、新型高效肥料发展缓慢等一系列问题,并对这些问题进行了分析;最后展望了我国肥料发展的趋势。

近10年来中国农村居民点用地时空特征

利用20世纪90年代中国1:10万土地利用动态变化数据,利用单元自动机和人工神经网络模型对中国农村居民点用地进行了区划。在此基础上,研究了90年代中国农村居民点用地动态变化时空格局。研究表明,农村居民点用地受区域位置、经济发展和国家政策的影响。90年代前5年,受沿海开放政策和经济高速发展的影响,长江三角洲、珠江三角洲和华北平原农村居民点用地扩展较快,中西部地区农村居民点用地扩展较慢;90年代后5年,在沿海地区经济发展速度放慢和国家实施耕地资源保护条例的情况下,沿海地区农村居民点用地扩张受到抑制,西部地区扩展加快。90年代中国经济体制处于由计划经济向市场经济转轨的过程中,农村居民点用地的动态变化格局受到经济发展和土地利用政策的深刻影响。

基于涡度相关技术估算植被/大气间净CO_2交换量中的不确定性

近年来,涡度相关技术的进步使陆地生态系统CO2通量的长期和连续观测成为可能。目前,涡度相关技术是全球通量观测网络(FLUXNET)测定植被/大气间CO2通量的主要技术手段,但绝大部分CO2通量观测站点都处于非典型的理想条件下,不能完全满足涡度相关技术的基本假设条件,从而导致基于涡度相关技术估算植被/大气间净生态系统CO2交换量的不确定性。系统介绍了涡度相关技术的基本假设,基本理论公式和误差的类型与特征等理论问题,重点阐述了通量测定中仪器本身的物理限制、二维和三维的气流运动、数据处理的方法和夜间通量的低估等

基于景观尺度过程模型的长白山地表径流量时空变化特征的模拟

运用已建立的景观尺度生态系统生产力过程模型EPPML对长白山自然保护区地表径流量的季节动态和空间分布特征进行了模拟,对其与环境因子间的相互关系进行了分析.模拟结果表明,长白山自然保护区地表径流量的季节进程表现出明显的三峰型,6月和9月出现低谷,8月达最大(2.58mm·d-1),与土壤含水量的季节变化趋势十分相似.1995年地表径流量的模拟值平均为0.203m·年-1,空间分布随海拔升高呈现明显增加的趋势,最高为高山流砾滩(0.619m·年-1),最低为阔叶红松林(0.081m·年-1).年地表径流量与叶

NDVI spatial pattern and its differentiation on the Mongolian Plateau

GIMMS NDVI database and geo-statistics were used to depict the spatial distribution and temporal stability of NDVI on the Mongolian Plateau. The results demonstrated that: (1) Regions of interest with high NDVI indices were distributed primarily in forested mountainous regions of the east and the north, areas with low NDVI indices were primarily distributed in the Gobi desert regions of the west and the southwest, and areas with moderate NDVI values were mainly distributed in a middle steppe strap from northwest to southeast. (2) The maximum NDVI values maintained for the past 22 years showed little variation. The average NDVI variance coefficient for the 22-year period was 15.2%. (3) NDVI distribution and vegetation cover showed spatial autocorrelations on a global scale. NDVI patterns from the vegetation cover also demonstrated anisotropy; a higher positive spatial correlation was indicated in a NW-SE direction, which suggested that vegetation cover in a NW-SE direction maintained increased integrity, and vegetation assemblage was mainly distributed in the same specific direction. (4) The NDVI spatial distribution was mainly controlled by structural factors, 88.7% of the total spatial variation was influenced by structural and 11.3% by random factors. And the global autocorrelation distance was 1178 km, and the average vegetation patch length (NW-SE) to width (NE-SW) ratio was approximately 2.4:1.0.

Facile electrochemical route to directly fabricate hierarchical spherical cupreous micro structures: Toward superhydrophobic surface

A templateless, surfactantless, electrochemical route is proposed to directly fabricate hierarchical spherical cupreous microstructures (HSCMs) on an indium tin oxide (ITO) substrate. The as-prepared HSCMs have been characterized by scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) analysis, X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD).

Self-assembly of guest-induced calix[4]arene nanocapsules into three-dimensional molecular architecture

In the presence of NH3-Ag+-NH3, the calix[4]arenes can be induced into dimeric nanocapsules, which can be used as building units constructing a 3D molecular architecture with the appropriate secondary ligands and metal ions.

Synthesis and gas permeability of novel fluorinated poly(phenylene-co-naphthalimide)s

A new class of high-performance polymers [poly(phenylene-co-naphthalimide)s] was prepared through the Ni(0) catalytic coupling of N-(4-chloro-2-trifluromethylphenyl)-5-chloro-1,8-naphthalimide and 2,5-dichlorobenzophenone. The resulting copolymers exhibited high molecular weights (high inherent viscosities) and a combination of desirable properties such as good solubility in dipolar aprotic solvents, film-forming capability, and mechanical properties. The glass-transition temperatures of the copolymers ranged from 320 to 403 degrees C and increased as the content of the naphthalimide moiety increased. Tough polymer films, obtained via casting from N-methylpyrrolidone solutions, had tensile strengths of 64-107 MPa and tensile moduli of 3.4-4.7 GPa. The gas permeability coefficients of the copolymers were measured for H-2, CO2, O-2, CH4, and N-2. They showed oxygen permeability coefficients and permeability selectivity of oxygen to nitrogen (permeability coefficient for O-2/permeability coefficient for N-2) in the ranges of 1.39-4.31 and 4.92-5.38 barrer, respectively.

Structures and electrochemical characteristics of several kinds of alloys

The structures and the electrochemical characteristics of La0.7-xCexMg0.3Ni2.8Co0.5 (x = 0.1-0.5) alloy, Ti0.25-xZrxV0.35Cr0.1Ni0.3 (x = 0.05-0.15) alloy and AB(3

Fe在丝光沸石骨架中取代位置的DFT研究

中国科学院山西煤炭化学研究所

Syntheses and crystal structures of bis(tetrahydrofurfurylindenyl) lanthanocene chlorides (C4H7OCH2C9H6)(2)LnCl (Ln = Nd, Sm, Dy, Ho, Er, Yb)

Reaction of anhydrous lanthanide trichlorides with tetrahydrofurfuryl indenyl lithium in THF afforded bis(tetrahydrofurfurylindenyl) lanthanocene chlorides complexes (C4H7OCH2C9H6)(2) LnCl, Ln = Nd (1), Sm (2), Dy (3), Ho (4), Er (5), Yb (6). The X-ray crystallographic structures of all the six complexes were determined and these indicate that they are unsolvated nine-coordinate monomeric complexes with a trans arrangement of both the sidearm and indenyl rings in the solid state. They belong to the same crystal system (orthorhombic) and space group (P2(1)2(1)2(1)) with the same structure. Especially, they are more stable to air and moisture than the corresponding unsubstituted indenyl lanthanide complexes.

Computer simulation of insoluble Pr(III) speciation in human interstitial fluid

A multi-phase model of Pr(III) speciation in human interstitial fluid was constructed and insoluble Pr(III) speciation was studied. When the total concentration of Pr(III) is below 8.401E-10 mol/L, soluble Pr(III) species are main species. With rising the total concentration of Pr(III), Pr(III) is firstly bound to phosphate to form precipitate of PrPO4, then bound to carbonate and another precipitate of Pr-2(CO3)(3) was obtained. When the total concentration is between 1.583E-9 mol/L and 4.000E-3 mol/L, the insoluble species are predominant Pr(III) species.

PDP用荧光粉的真空紫外辐照特性

利用“等离子体显示用荧光粉光学测试系统”中147nm真空紫外光,对实用的（Y,Gd）BO_3:Eu红粉,Zn_2SiO_4:Mn和（Ba,Sr,Mg）O·nAl_2O_3:Mn绿粉以及（Ba,Mg）O·nAl_2O_3:Eu~(2+)蓝粉进行较长时间的辐照,以观察荧光粉的衰减特性,发现红粉衰减最小,蓝粉初始衰减较快,而绿粉亮度存在一个先升后降的现象。