平菇菌丝体对Cd、Pb及其复合污染的生长与富集响应

在PDA平板培养条件下,研究Cd、Pb及其复合污染对平菇菌丝体生长的影响以及平菇菌丝体对生长基质中Cd、Pb的生物富集作用.结果表明,在实验浓度范围内,菌丝生长势、菌落直径和菌丝体干重等均随着重金属浓度的增大而减弱(小)或降低.平菇菌丝体对Cd、Pb均具有生物富集作用,并且随着重金属浓度的增大菌丝体中重金属含量逐渐增大.Cd、Pb复合污染能促进平菇菌丝体对Pb的吸收,而抑制对Cd的吸收.

土壤有效态Pb和Cd与大蒜吸收Pb和Cd的关系

通过对大蒜的重金属添加土培试验,采用DTPA(二乙基胺五乙酸)为有效态铅、镉提取剂,对受试土壤进行浸提检测,分析Pb和Cd在大蒜不同部位的吸收、积累及其与土壤中有效态含量的相关性。根据GB 2762-2005《食品中污染物限量标准》中对食品中Pb、Cd的限量要求,初步确定了本试验条件下,土壤中重金属Pb、Cd有效态的临界值,并以此临界点评价该种土壤中Pb、Cd对大蒜的潜在污染。

污染土壤中Sn、Hg、Sb、Bi解吸动力学特性的研究

土壤中重金属的解吸直接影响重金属在环境中的形态转化和植物有效性。文章以我国东北地区草甸棕壤作为研究对象,通过对Sn、Hg、Sb、Bi单一及复合污染土壤中Sn、Hg、Sb、Bi的解吸动力学行为的研究,探索污染土壤中重金属Sn、Hg、Sb、Bi的解吸特性与规律。结果表明,不同污染类型的污染土壤中Sn、Hg、Sb、Bi这几种重金属的解吸量随着振荡时间的延长而不断增加。重金属Sn、Hg、Sb、Bi的解吸过程可分为快速反应阶段和慢速反应阶段。描述土壤Sn、Hg、Sb、Bi解吸动力学过程的最优模型为Elovich方程,其次为双常数方程,而一级动力学方程拟合效果不佳。此外,污染土壤中重金属Sn、Hg、Sb、Bi的解吸过程受共存重金属元素的影响。

细河流域土壤中Hg、Cd、Pb和Zn含量的空间分布特征

利用地统计学方法研究了沈阳市细河流域表层土壤中Hg、Cd、Pb和Zn含量的空间结构及其分布特征。结果表明,土壤中Hg、Cd、Pb和Zn的平均含量均高于其背景值;土壤Cd和Zn含量属中等程度的空间相关,Hg和Pb属于空间弱相关,其空间变异均为随机性因素和结构性因素共同作用的结果,但Cd和Zn含量主要受结构性因素影响,而Hg和Pb主要受随机性因素影响。土壤中Hg、Cd、Pb和Zn空间分布特征表明,4种重金属含量在上游较高,顺流而下含量明显下降;土壤中Hg和Pb含量最大值在四方台地区,Cd和Zn含量最大值分布在甘官和富官一带。细河流域土壤Hg、Cd、Pb和Zn含量空间分异是污水灌溉、固体废弃物堆放、农业生产及交通尾气等因素综合作用的结果。

Stripping voltammetric determination of Pb(II) and Cd(II) based on the multiwalled carbon nanotubes-Nafion-bismuth modified glassy carbon electrodes

In this work, a new method for the simultaneous determination of Pb(II) and Cd(II) on the multiwalled carbon nanotubes (MWNT)-Nafion-bismuth modified glassy carbon electrode (GCE) using square-wave anodic stripping voltammetry has been studied. Scanning electron microscopy was used to investigate the characteristics of the MWNT-Nafion-bismuth modified GCE.

Sensitive determination of Cd and Pb by differential pulse stripping voltammetry with in situ bismuth-modified zeolite doped carbon paste electrodes

Here we investigated the analytical performances of the bismuth-modified zeolite doped carbon paste electrode (BiF-ZDCPE) for trace Cd and Pb analysis. The characteristics of bismuth-modified electrodes were improved greatly via addition of synthetic zeolite into carbon paste. To obtain high reproducibility and sensitivity, optimum experimental conditions for bismuth deposition Were Studied.

Prussian Blue/Multiwalled Carbon Nanotube Hybrids: Synthesis, Assembly and Electrochemical Behavior

Prussian blue/carbon nanotube (PB/CNT) hybrids with excellent dispersibility in aqueous solutions were synthesized by adding CNTs to an acidic solution of Fe3+, [Fe(CN)(6)](3-) and KCl. Fourier transform infrared spectroscopy, UV-vis absorption spectroscopy and scanning electron microscopy were employed to confirm the formation of PB/CNT hybrids. The PB nanoparticles formed on the CNT surfaces exhibit a narrow size distribution and an average size of 40 nm. The present results demonstrate that the selective reduction of Fe3+ to Fe2+ by CNTs is the key step for PB/CNT hybrid formation. The subsequent fabrication of the PB/CNT hybrid films was achieved by layer-by-layer technique. The thus-prepared PB/CNT hybrid films exhibit electrocatalytic activity towards H2O2 reduction.

(PE-g-PB-g-PA6)接枝共聚物中PA6链段结晶行为研究

采用选择性溶剂交替抽提的方法提纯在PE-g-PB-g-MA/PA6共混物中原位生成的接枝共聚物PE-g-PB-g-PA6,通过TEM﹑XPS﹑XRD﹑DSC等方法研究了该接枝共聚物的形貌与结晶行为。结果表明,PA6链段的结晶受到相形貌和分子结构的限制,扩散速度降低,导致在通常的结晶速率条件下(10℃/min)结晶不完善。

3D 异金属Bi(III)-Pr(III)配位聚合物的合成、晶体结构和热稳定性

在水溶液中合成了双金属配位聚合物({[(NO3)(H2O)3Pr(μ4-Hedta)Bi-(NO3)2].2H2O}2)n,并通过元素分析、红外光谱和X射线单晶衍射等手段进行了表征.该配合物为单斜晶系,P2(1)/n空间群,a=1.26831(18)nm,b=0.82189(12)nm,c=2.3755(3)nm,β=105.055(2)°,R=0.0429,V=2.3913(6)nm3,Z=4.Bi(Ⅲ)-Pr(Ⅲ)间通过配阴离子Hedta3-中4个羧基的桥联作用构建配合物的3D结构.TG-DSC结果表明,该配合物热分解经历脱水、配体分解以及盐分解过程,残余物为Bi-Pr-O的三元复合氧化物.

Synthesis and applications of 3-[6-(hydroxymethyl)pyridin-2-yl]-1,1 '-bi-2-naphthols or 3,3 '-bis[6-(hydroxymethyl)pyridin-2-yl]-1,1 '-bi-2-naphthols

A series of new 1,1'-bi-2-naphthol (BINOL) derived ligands, 3-[6-(hydroxymethyl)pyridin-2-yl]-BINOLs or 3,3'-bis[6(hydroxymethyl)pyridin-2-yl]-BINOLs, bearing one or two chiral pyridinylmetlianols attached to a binaphthyl skeleton, have been synthesized using the Suzuki cross-coupling reaction. The resulting compounds have been used as ligands in the enantioselective addition of diethylzinc to aldehydes; the products were obtained with up to 96% ee.

Study of the mechanism of nanocrystalline Pb(Zr0.52Ti0.48)O-3 prepared by accelerated sol-gel process

Nanocrystalline Pb(Zr0.52Ti0.48)O-3 was prepared from lead acetate, zirconium oxynitrate and titanium tetra-n-butoxide by a sol-gel method. It is found that both the crystallization temperature of precursor PZT and PZT product size were increased with increase of V(C3H8O2)/V(H2O) ratio in solution used. At V(C3H8O2)/V(H2O) = 4.47 the gel was formed moderately quick, and the nanocrystalline PZT with uniform granularity and low crystallizing temperature could be obtained. The diameter of the final nanocrystalline was ranged 60similar to70 nm as measured by atomic force microscopy (AFM). The crystallizing temperature of the precursor PZT was 443degreesC and the crystallization reaction was completed at 500degreesC by DTA and TG. The sol-gel reaction process was monitored by FT-IR and XRD.

Calculation of the thermal expansion coefficient for Bi2Sr2CaCu2O8

An estimation method of thermal expansion coefficient in term of lattice energy which was developed earlier for simple materials is extended to a complex material of Bi2Sr2CaCu2O8 (Bi-2212). The calculation of the chemical bond property and thermal expansion coefficient of Bi-2212 has been carried out and the theoretical values were in good agreement with the corresponding experimental results. The dependence of the thermal expansion coefficient on the different structures and on the flexible oxidation states of Bi and Cu are investigated. The results indicate that the thermal expansion coefficients of Bi-2212 are insensitive to the low lattice distortion of the average structure and the changes of formal valences of Bi and Cu ions.