287 resultados para MOLECULAR-WEIGHT RATIO
Resumo:
Heat shock protein 90 (HSP90) is a highly conserved molecular chaperone that plays key roles in the folding, maintenance of structural integrity and regulation of a subset of cytosolic proteins. In the present study, the cDNA of Argopecten irradians HSP90 (designated AiHSP90) was cloned by the combination of homology cloning and rapid amplification of cDNA ends (RACE) approaches. The full-length cDNA of AiHSP90 was of 2669 bp, including an open reading frame (ORF) of 2175 bp encoding a polypeptide of 724 amino acids with predicted molecular weight of 83.08 kDa and theoretical isoelectric point of 4.81. BLAST analysis revealed that AiHSP90 shared high similarity with other known HSP90s, and the five conserved amino acid blocks defined as HSP90 protein family signatures were also identified in AiHSP90, which indicated that AiHSP90 should be a cytosolic member of the HSP90 family. Fluorescent real-time quantitative PCR was employed to examine the expression pattern of AiHSP90 mRNA in haemocytes of scallops challenged by Gram-negative bacteria Vibrio anguillarum and Gram-positive bacteria Micrococcus luteus. In both bacterial challenged groups, the relative expression level of AiHSP90 transcript was up-regulated and reached maximal. level at 9 h after injection, and then dropped progressively to the original level at about 48 h post challenge. The results indicated that AiHSP90 was potentially involved in the immune responses against bacteria challenge in scallop A. irradian. (c) 2007 Elsevier Ltd. All rights reserved.
Resumo:
Catalase is one of the central enzymes involved in scavenging the high level of reactive oxygen species (ROS) by degradation of hydrogen peroxide to oxygen and water. The full-length catalase cDNA of Zhikong scallop Chlamys farreri (denoted as CfCAT) was identified from hemocytes by expressed sequence tag (EST) and rapid amplification of cDNA ends (RACE) approaches. The nucleotide sequence of CfCAT cDNA consisted of 3146 bp with a 5' UTR of 103 bp, an unusually long 31 UTR of 1519 bp with a canonical polyadenylation signal sequence AATAAA and a potyA tail, and an open reading frame (ORF) of 1521 bp encoding a polypeptide of 507 amino acids with predicted molecular weight of 57.5 kDa. The deduced amino acid sequence of CfCAT has significant homology to catalases from animals, plants and bacteria. Several highly conserved motifs including the proximal heme-ligand signature sequence RLFSYNDTH, the proximal active site signature FNRERIPERVVHAKGGGA, and the three catalytic amino acid residues of His(72), Asn(145) and Tyr(355) were identified in the deduced amino acid sequence of CfCAT. The CfCAT was demonstrated to be a peroxisomal glycoprotein with two potential glycosylation sites and a peroxisome targeting signal of ANL that was consistent with human, mouse and rat catalases. The time-course expression of CfCAT in hemocytes was measured by quantitative real-time PCR. The expression of CfCAT increased gradually and reached the highest point at 12 h post-Vibrio infection, then recovered to the original level at 24 h. All these results indicate that CfCAT, a constitutive and inducible protein, is a member of the catalase family and is involved in the process against ROS in scallop. (c) 2007 Published by Elsevier Ltd.
Resumo:
Thioester-containing proteins are a family of proteins characterized by the unique intrachain beta-cysteinyl-gamma-glutamyl thioester, which play important roles in innate immune responses. The cDNA of Zhikong scallop Chlamys farreri thioester-containing protein (designated as CfTEP) was cloned by expressed sequence tag (EST) and rapid amplification of cDNA ends (RACE) approaches. The full-length cDNA of CfTEP was of 4616 bp, consisting of a 5 '-terminal untranslated region (UTR) of 30 bp and a 3 ' UTR of 140 bp with a polyadenylation signal sequence AATAAA and a poly(A) tail. The CfTEP cDNA encoded a polypeptide of 1481 amino acids with the theoretical isoelectric point of 5.98 and the predicted molecular weight of 161.4 kDa. The deduced amino acid sequence of CfTEP contained the canonical thioester motif GCGEQ, nine potential N-glycosylation sites and a C-terminal distinctive cysteine signature. It also contained a presumed catalytic histidine and proteolytic cleavage sites that were similar to C3 molecules. The high similarity of CfTEP with the thioester-containing proteins in other organisms, such as the TEPs from insects, the complement component C3, C4, C5 and the protease inhibitor alpha(2)-macroglobulin indicated that CfTEP should be a member of TEP family. The phylogenetic analysis revealed that CfTEP was closely related to TEPs from mollusc, nematodes and insects, and they formed a separate branch apart from the branches of complements factors and alpha(2)-macroglobulins. The spatial expression of CfTEP transcripts in healthy and bacterial challenged scallops was examined by semi-quantitative RT-PCR. The CfTEP transcripts were mainly detected in the tissues of hepatopancreas and gonad, and remarkably up-regulated by Microbial challenge, which suggested that CfTEP was a constitutive and inducible acute-phase protein involved in immune defense. These results provided new insights into the role of CfTEP in scallop immune responses, as well as the evolutionary origin of this important, widespread and functionally diversified family of proteins. (c) 2007 Published by Elsevier Ltd.
Resumo:
Lysozyme is a widely distributed hydrolase possessing lytic activity against bacterial peptidoglycan, which enables it to protect the host against pathogenic infection. In the present study, the cDNA of an invertebrate goose-type lysozyme (designated CFLysG) was cloned from Zhikong scallop Chlamys farreri by expressed sequence tag (EST) and rapid amplification of cDNA ends (RACE) techniques. The full-length cDNA of CFLysG consisted of 829 nucleotides with a canonical polyadenylation signal sequence AATAAA and a poly(A) tail, and an open reading frame (ORF) of 603 bp encoding a polypeptide of 200 amino acid residues with a predicted molecular weight of 21.92 kDa and theoretical isoelectric point of 7.76. The high similarity of CFLysG with goose-type (g-type) lysozymes in vertebrate indicated that CFLysG should be an invertebrate counterpart of g-type lysozyme family, which suggested that the origin of g-type lysozyme preceded the emergence of urochordates and even preceded the emergence of deuterostomes. Similar to most g-type lysozymes, CFLysG possessed all conserved features critical for the fundamental structure and function of g-type lysozymes, such as three catalytic residues (Glu 82, Asp 97, Asp 108). By Northern blot analysis, mRNA transcript of CFLysG was found to be most abundantly expressed in the tissues of gills, hepatopancreas and gonad, weakly expressed in the tissues of haemocytes and mantle, while undetectable in the adductor muscle. These results suggested that CFLysG could possess combined features of both the immune and digestive adaptive lysozymes. To gain insight into the in vitro lytic activities of CFLysG, the mature peptide coding region was cloned into Pichia pastoris for heterogeneous expression. Recombinant CFLysG showed inhibitive effect on the growth of both Gram-positive and Gram-negative bacteria with more potent activities against Gram-positive bacteria, which indicated the involvement of CFLysG in the innate immunity of C. farreri. (c) 2006 Elsevier Ltd. All rights reserved.
Resumo:
Serine proteinase homologues (SPHs), as one of prophenoloxiase-activating factors (PPAFs), play critical roles in innate immunity of crabs. Based on an EST from the eyestalk full length cDNA library, the complete cDNA (designated as PtSPH) and genomic DNA of SPH from the swimming crab Portunus trituberculatus were cloned in this study. The estimated molecular weight of mature PtSPH (354 amino acids) was 38.7 kDa and its isoelectric point was 5.08. Multiple sequence alignment revealed that PtSPH lacked a catalytic residue with a substitution of Ser in the active site triad to Gly. Phylogenetic analysis indicated PtSPH together with PPAFs of Callinectes sapidus (AAS60227), Eriocheir sinensis (ACU65942), Penaeus monodon (ABE03741, ACP19563) and Pacifastacus leniusculus (ACB41380), formed a distinct cluster which only included clip-SPHs. As the first analyzed genomic structure of PPAFs in crustaceans, two introns were found in the open reading frame region of this gene. The mRNA transcripts of PtSPH could be detected in all the examined tissues, and were higher expressed in the eyestalk than that in gill, hepatopancreas, haemocytes and muscle. Accompanied with the change in phenoloxidase (PO) activity and total haemocyte counts, the temporal expression of PtSPH gene in haemocytes after Vibrio alginolyticus challenge demonstrated a clear time-dependent expression pattern with two peaks within the experimental period of 32 h. These findings suggest that PtSPH is involved in the antibacterial defense mechanism of Portunus tritubercualtus crab. (C) 2010 Elsevier Ltd. All rights reserved.
Resumo:
Chitosan (CS) and chitosan sulfates (CSS) with different molecular weight (Mw) were reacted with 4-acetamidobenzene sulfonyl chloride to obtain sulfanilamide derivatives of chitosan and chitosan sulfates (LSACS, HSACS, LSACSS, HSACSS). The preparation conditions such as different reaction time, temperature, solvent, and the molar ratio of reaction materials are discussed in this paper. Their structures were characterized by FTIR spectroscopy and elemental analyses. The antioxidant activities of the derivatives were investigated employing various established in vitro systems, such as hydroxyl-radical (OH) superoxide anion (O-2(center dot-)) scavenging and reducing power. All kinds of the compounds (HCS, LCS, HCSS, LCSS, HSACS, LSACS, HSACSS, LSACSS) showed stronger scavenging activity on hydroxyl radical than ascorbic acid (Vc). The inhibitory activities of the derivatives toward superoxide radical by the PMS-NADH system were obvious. The experiment showed that the superoxide radical scavenging effect of sulfanilamide derivatives of chitosan and chitosan sulfates was stronger than that of original CS and CSS. All of the derivatives were efficient in the reducing power. The results indicated that the sulfanilamide group were grafted on CS and CSS increased the reducing power of them obviously. (c) 2007 Elsevier Ltd. All rights reserved.
Resumo:
A low molecular weight fucogalactan, obtained from the brown seaweed Laminaria japonica, was separated into three fractions (LF1, LF2 and LF3) by DEAE-Sepharose FF column chromatography. All three fractions contained predominantly fucose, sulfate group and galactose. The results showed that the main fraction LF2 consisted of L-fucose, D-galactose and sulfate at a molar ratio 6:1:9. Structural study on the LF2 was carried out by NMR spectroscopy. The backbone of LF2 was primarily (1 -> 3)-linked alpha-L-fucopyranose residues (75%) and a few (1 -> 4)-alpha-L-fucopyranose linkages (25%). The branch points were at C-4 of 3-linked alpha-L-fucopyranose residues by beta-D-galactopyranose unites (35%, molar ratio) or at C-2 of 3-linked alpha-L-fucopyranose residues by non-reducing terminal fucose unites (65%, molar ratio). Sulfate groups occupied at position C-4 or C-2, sometimes C-2, 4 to fucose residues, and C-3 and/or C-4 to galactose residues. The structure of LF2 was supposed as following: [GRAPHICS] (C) 2010 Elsevier B.V. All rights reserved.
Resumo:
Effects of various kinds of additives as well as aging of the catalyst on the polymerization of styrene catalyzed by TiCl4/MgCl2-AlEt3 system have been studied. Experiments show that in toluene the isotacticity of polystyrene can be up to 83% for aged catalyst, whereas when the catalyst is not aged. non-stereospecific polymer is the main product. When PCl3 is used as an additive, the catalyst system gives high activity and isotacticity. The use of a mixture of AlEt3/H2O (1: 1 mole ratio) as a cocatalyst is also efficient. The catalyst [TiCl4-PCl3/MgCl2-AlEt3/H2O] displays high activity and product isotacticity (94%) with an average molecular weight up to 2 X 10(-6). When Co(acac)(3) is added to to [TiCl4/MgCl2-AlEt3] catalyst after it was aged, the isotacticity can be up to 97%. (C) 2001 Elsevier Science Ltd. All rights reserved.
Resumo:
The laser-solidified microstructural and compositional characterization and phase evolution during tempering at 963 K were investigated using an analytical transmission electron microscope with energy dispersive X-ray analysis. The cladded alloy, a powder mixture of Fe, Cr, W, Ni, and C with a weight ratio of 10:5:1:1:1, was processed with a 3 kW continuous wave CO2 laser. The processing parameters were 16 mm/s beam scanning speed, 3 mm beam diameter. 2 kW laser power, and 0.3 g/s feed rate. The coating was metallurgically bonded to the substrate, with a maximum thickness of 730 mu m, a microhardness of about 860 Hv and a volumetric dilution ratio of about 6%. Microanalyses revealed that the cladded coating possessed the hypoeutectic microstructure comprising the primary dendritic gamma-austenite and interdendritic eutectic consisted of gamma-austenite and M7C3 carbide. The gamma-austenite was a non-equilibrium phase with extended solid solution of alloying elements and a great deal of defect structures, i.e. a high density of dislocations, twins, and stacking faults existed in gamma phase. During high temperature aging, in situ carbide transformation occurred of M7C3 to M23C6 and M6C. The precipitation of M23C6, MC and M2C carbides from austenite was also observed.
Resumo:
The microstructural and compositional features of the laser-solidified microstructures and phase evolutions occurring during high temperature tempering were investigated by using analytical electron microscopy with energy dispersive X-ray analysis. The cladded alloy, a powder mixture of Fe, Cr, W, Ni and C with a weight ratio of 10:5:1:1:1, was processed with a 3 kW continuous wave CO2 laser. The cladded coating possessed the hypoeutectic microstructure of the primary dendritic gamma-austenite and interdendritic eutectic consisting of (gamma+M7C3). The gamma-austenite is a nonequilibrium phase with extended solid solution of alloying elements. And, a great deal of fine structures, i.e., a high density of dislocations, twins, and stacking faults existed in austenite phase. During high temperature aging, the precipitation of M23C6, MC and M2C in austenite and in situ transformation of M7C3(+gamma) --> M23C6 and M7C3+gamma --> M6C occurred. The laser clad coating revealed an evident secondary hardening and superior impact wear resistance.
Resumo:
The rapidly solidified microstructural and compositional features, the precipitation and transformation of carbides during tempering, and the impact wear resistance of an iron-based alloy coating prepared by laser cladding are investigated. The clad coating alloy, a powder mixture of Fe, Cr, W, Ni, and C with a weight ratio of 10:5:1.1.1, is processed using a continuous wave CO, laser. Microstructural studies demonstrate that the coating possesses the hypoeutectic microstructure comprising the primary dendritic gamma-austenite and interdendritic eutectic consisting of gamma-austenite and M7C3 carbides. gamma-Austenite is a non-equilibrium phase with an extended solid solution of alloying elements. During high temperature tempering at 963 K for 1 h, the precipitation of M23C6, MC and M2C carbides in austenite and in situ carbide transformation of M7C3 to M23C6 and M7C3 to M6C respectively are observed. In addition, the microstructure of the laser-clad coating reveals an evident secondary hardening and a superior impact wear resistance.
Resumo:
The lytropic liquid crystals in dodecanic acid diethanolamine (DAD)/n-butanol (C4OH)/octane (n-C8H18)/deuteron (D2O) system were studied to determine the phase regions and were investigated by H-2-NMR spectroscopy,optical polarizing microscope and small-angle X-ray diffraction (SAXD) methods. The results indicate that the lamellar, hexagonal and cubic liquid crystals all exist in the above system. Keeping the weight ratio of DAD and C4OH constant,the microphase structure, H-2 quadruple splitting and the interlayer spacing are all changed with the addition of deuteron.
Resumo:
This paper investigates the effects of structure parameters on dynamic responses of submerged floating tunnel (SFT) under hydrodynamic loads. The structure parameters includes buoyancy-weight ratio (BWR), stiffness coefficients of the cable systems, tunnel net buoyancy and tunnel length. First, the importance of structural damp in relation to the dynamic responses of SFT is demonstrated and the mechanism of structural damp effect is discussed. Thereafter, the fundamental structure parameters are investigated through the analysis of SFT dynamic responses under hydrodynamic loads. The results indicate that the BWR of SFT is a key structure parameter. When BWR is 1.2, there is a remarkable trend change in the vertical dynamic response of SFT under hydrodynamic loads. The results also indicate that the ratio of the tunnel net buoyancy to the cable stiffness coefficient is not a characteristic factor affecting the dynamic responses of SFT under hydrodynamic loads.
Resumo:
Since 2001, a research group in the Institute of Mechanics, Chinese Academy of Sciences, has been devoted to the research of essential mechanics issues for submerged floating tunnel (SFT). In addition to the structural design of the SFT prototype in Qiandao Lake, the relevant researches cover a number of topics. This paper briefly describes the research procedure and results, including dynamic response of SFT due to surface wave, vortex-induced vibration of anchoring system, structural analysis of curved SFT, temperature effects of curved SFT, structural dynamic response due to accidental load, and effects of structural parameters (buoyancy-weight ratio, tunnel length,tether stiffness,etc.) on dynamic response.
Resumo:
Catalytic cracking of China no. 3 aviation kerosene using a zeolite catalyst was investigated under supercritical conditions. A three-stage heating/cracking system was specially designed to be capable of heating 0.8 kg kerosene to a temperature of 1050 K and pressure of 7.0 MPa with maximum mass flow rate of 80 g/s. Sonic nozzles of different diameters were used to calibrate and monitor the mass flow rate of the cracked fuel mixture. With proper experiment arrangements, the mass flow rate per unit throat area of the cracked fuel mixture was found to well correlate with the extent of fuel conversion. The gaseous products obtained from fuel cracking under different conditions were also analyzed using gas chromatography. Composition analysis showed that the average molecular weight of the resulting gaseous products and the fuel mass conversion percentage were a strong function of the fuel temperature and were only slightly affected by the fuel pressure. The fuel conversion was also shown to depend on the fuel residence time in the reactor, as expected. Furthermore, the heat sink levels due to sensible heating and endothermic cracking were determined and compared at varying test conditions. It was found that at a fuel temperature of similar to 1050 K, the total heat sink reached similar to 3.4 MJ/kg, in which chemical heat sink accounted for similar to 1.5 MJ/kg.