AN ALL-SOLID-STATE LITHIUM POLYANILINE RECHARGEABLE CELL

The performance of an all-solid-state cell having a lithium negative electrode, a modified polyethylene oxide (PEO)-epoxy resin (ER) electrolyte, and a polyaniline (PAn) positive electrode has been studied using cyclic voltammetry, charge/discharge cycling, and polarization curves at various temperatures. The redox reaction of the PAn electrode at the PAn/modifed PEO-ER interface exhibits good reversibility. At 50-80-degrees-C, the Li/PEO-ER-LiClO4/PAn cell shows more than 40 charge/discharge cycles, 90% charge/discharge efficiency, and 54 W h kg-1 discharge energy density (on PAn weight basis) at 50-mu-A between 2 and 4 V. The polarization performance of the battery improves steadily with increase in temperature.

The preparation and bioactivity research of agaro-oligosaccharides

Agaro-oligosaccharides were hydrolytically obtained from agar using hydrochloric acid, citric acid, and cationic exchange resin (solid acid). The FT-IR and NMR data showed that the hydrolysate has the structure of agaro-oligomers. Orthogonal matrix method was applied to optimize the preparation conditions based on alpha-naphthylamine end-labeled HPLC analysis method. The optimal way for oligosaccharides with different degree of polymerization (DP) was achieved by using solid acid degradation, which could give high yield and avoid solution neutralization process. Agaro-oligosaccharides with high purity were consequently obtained by activated carbon column isolation. Furthermore, the antioxidant and alpha-glucosidase inhibitory activity of three fractions were also investigated. The result indicated that 8% ethanol-eluted fraction showed highest activity against alpha-glucosidase with IC50 of 8.84 mg/mL, while 25% ethanol-eluted fraction possessed excellent antioxidant ability.

利用MC-ICP-MS测定硼同位素及其在西藏地热和盐湖中的初步应用

Based on previous studies, boron can be separated from aqueous samples with Amberlite IRA-743 resin. Experiments on the elute temperature, elute volume and the dynamic resin exchange capacity have been performed in this study. Results show that the dynamic exchange capacity of the resin is 4.2mg B/g and at room temperature, boron fixed on the resin within this capacity level can be extracted quantitatively by using 5ml 2%HNO3. A new procedure has been developed for the measurement of boron isotope ratios in water samples using a Neptune MC-ICP-MS, after resolving the memory effect, which is a key problem, and investigating the impacts of mass bias and Si matrix effect. Using this method, it usually takes 20 min to perform one measurement on 0.1ppm boron solution with a precision of 0.23‰ (SD). If the relative deviation between a sample and the standard is large, the washout time needs to be doubled to achieve a higher precision. δ11B values of water samples from Yangbajing geothermal field vary from -10.53 to -9.13‰. Owing to the large difference B concentration and the small B isotope difference between deep geothermal water and surface water, B isotope ratios of the shallow geothermal fluids are dominated by the deep end member rather than the shallower one in the mixing process. As a consequence, δ11B-B relation is indicative basically of a dilution process. Vapor-liquid separation and calcite scaling also greatly influence B isotope fractionation. δ11B values of water samples from Dagejia geothermal field are from -15.98‰ to -11.67‰. Boron in Changma River near the field has two sources, freshwater lakes (Dajiamang Lake and Canke Lake) and geothermal waters. Finally, a preliminary discussion is included on boron geochemical characteristics of the salt lakes in Shuanghu area and other geothermal fields, to provide information for future studies on boron isotope geochemistry of geothermal systems and salt lakes in Tibet.

微量样品钕-锶-铅同位素分析方法在黄河下游悬浮颗粒物及沉积物的应用

Aim in Rb-Sr-REE-Pb isotopic analysis of river material, a single-stage, highly efficient and rapid chemical separation method of Rb-Sr-REE-Pb has been established by a combination of the SR special resin and the RE resin. At the same time, Feasibility of high precision analysis on micro-size Nd samples，which were chemically separated by using the LN resin, were systematicly studied using the NdO+ technique in thermal ionization mass spectrometer (TIMS). Results show that high precision measurement of Nd isotopic ratios can be successfully achieved on micro-sample of 1 ng size lever, by systematic experiments on isobar interferences and optimizing separation and measurement conditions. This method will greatly extend the application prospect of the NdO+ technique. Sr-Nd-Pb isotopic composition of suspending particle material (SPM) and sediment and Sr isotopic composition of river water in the low reaches of the Yellow Rriver have been systematically analysed in this study. Results can indicate followings: (1) relative stable Sr isotopic ratios around 0.7112 of river water suggest great influcence from dissolution of carbonate component of loss material on Sr isotopic composition of river water; (2) Nd isotopic compositions of SPM and sediment of the Yellow river are is similar, mean εNd value of SPM around -11.5 and mean εNd value of sediment -12.7, slightly lower than that of SPM. Nd isotopic composition of the Yellow River material is simarlar to or slightly lower than loss material (-9.5); (3) evidence of Sr and Pb isotopic compositions of both SPM and sediment reveals a mixing trend of two endmembers. Sr isotopic ratios of SPM after leaching are significantly different that those without leaching, possibly suggesting strong alteration of river water. Pb isotopic ratios of SPM remain unchangable after leaching compared with unleached SPM; (4) Pb-contents of SPM are commonly higher than those of sediments, while Pb isotopic ratios of SPM are significantly lower. Pb isotopic composition of the Yellow River is relatively constant, which can be a useful provenance indicator between the Changjiang and Yellow Rivers.