IMP质子治癌3D剂量探测系统

文章描述了中国科学院近代物理研究所(IMP)正在研制的IMP质子治癌装置3D剂量测量系统。该系统主要由2D剖面探测器、辐照深度和剂量探测器、射程调整器等组成。其中,多级双维位置灵敏平行板雪崩探测器(MPPAC)使用C3F8作为工作气体,工作气压为700Pa,阳极电压为+700V。对3组分α粒子测得位置分辨为0.54mm(FWHM)。

束流物理学的量子方法初探

　量子束流物理学是近年来发展起来的处理束流传输的全新方法,它是经典束流物理学的有益补充。介绍了量子束流物理学的热波模型和基于狄拉克方程的相对论电子束磁透镜量子理论,并与经典束流物理学方法进行了比较。

Latest progress of the RFQ cooler and buncher RFQ1L

The RFQ cooler and buncher RFQ1L is a key device of the SHANS (Spectrometer for Heavy Atoms and Nucleax Structure). The status of the machining and assembly of the central part is introduced, and the structure of the whole RFQ1L system and the preliminary plan for the testing are discussed also.

Properties of alpha-decay to ground and excited states of heavy nuclei

Branching ratios and half-lives of alpha-decay to the ground-state rotational bands as well as the high-lying excited states of even-even nuclei have been calculated in the framework of the generalized liquid drop model (GLDM) and Royer's formula that we improved very recently. The calculation covers the isotopic chains from Ra to No in the mass regions 222 <= A <= 252 and 88 <= Z <= 102. The agreement between the calculated results and the experimental data indicates the reliability of investigating the properties of the unfavored alpha-decay with our method, especially the improved Royer's formula, which is very valuable for the analysis of experimental data. In addition, the dependence of half-lives on excitation energies of daughter nuclei has been investigated. It is shown that the influence on half-lives becomes stronger and stronger with the increase of the excitation energies.

Characteristics of the sampling paddle modules of neutron wall from the cosmic ray test

In the construction of a large area neutron detector (neutron wall) that is used to detect neutrons at GeV energies, the performances of all the sampling paddle modules prepared for the neutron wall are investigated with a specially designed test bench. Tested by cosmic rays, an average intrinsic time resolution of 222.5 ps is achieved at the center of the modules. The light attenuation length and the effective speed of the light in the module are also investigated.

逼近理想解排序方法与园林规划树种选择

将多目标决策中的逼近理想解的排序方法引入到园林规划树种选择之中,通过对园林规划目标,规划区立地条件,园林树木特性,园林树木用途进行指标量化,建立规划目标指标量化+TOPSIS模型,并结合实例验证其准确性和优越性,为风景园林树种规划提供一种科学、理性、规范的方法。

Preparation of Mn substituted La-hexaaluminate catalysts by using supercritical drying

LaMnxAl12-xO19 catalysts were prepared from NH4OH and metal nitrates solutions. Supercritical drying (SCD) and conventional oven drying (CD) methods were used to extract the water in the hydrogel. The effects of drying methods on properties of the catalysts were investigated by means of TEM, N-2-adsorption, thermogravimetry (TG)-differential thermal analysis (DTA) and X-ray diffraction. SCD method is beneficial to maintain high surface area and improving catalytic activity for methane combustion of the catalyst. The specific surface area and pore volume of LaMn1Al11O19 catalyst prepared by SCD method are 28 m(2)/g and 0.23 cm(3)/g, respectively, and the ignition of methane could be carried out at 450degreesC. However, those of the CD catalyst prepared from the same precursor are 15 m(2)/g, 0.11 cm(3)/g and 530 degreesC, respectively. Suitable Mn content (0 less than or equal to x less than or equal to 2) could promote the formation of LaMnAl11O19 hexaaluminate, while further addition of Mn (2 less than or equal to x less than or equal to 6) cause the formation of LaMnO3. (C) 2003 Elsevier B.V All rights reserved.

不同有机物料在潮棕壤中有机碳分解进程

用尼龙网袋法研究了特定年度中,不同月份间有机物料在潮棕壤旱田、水田中有机碳分解速率及C/N变化。结果表明,4种物料(玉米秸和玉米根,水稻秸和水稻根)在潮棕壤地区温度、湿度适宜的前3个月(1999年7~月)迅速分解,之后进入缓慢分解阶段,其中根的分解残留率始终高于秸秆。经计算约有2/3的玉米根和稻根腐解产物残留在土壤里;分解至试验结束,所有物料的C/N比都趋于一致,约在10~13之间,与土壤腐殖质的C/N比非常相近,说明这些物料已基本完成其腐殖化过程,而成为较稳定的有机组分,这对增加土壤有机质、培肥土壤非常重要。

On the surface sites Of MOP/SiO2 catalyst under sulfiding conditions: IR spectroscopy and catalytic reactivity studies

The surface sites of MoP/SiO2 catalysts and their evolution under sulfiding conditions were characterized by IR spectroscopy using CO as the probe molecule. The HDS activities of thiophene were measured on the MoP/SiO2 catalyst that was subjected to different sulfidation and reactivation pretreatments. Cus Modelta+ (0 < delta less than or equal to 2) sites are probed on the surface of fresh MoP/SiO2 by molecularly adsorbed CO, exhibiting a characteristic IR band at 2045 cm(-1). The surface of MoP/SiO2 is gradually sulfided in HDS reactions, as revealed by the shift of the IR band at 2045 to ca. 2100 cm(-1). Although the surface of a MoP/SiO2 catalyst becomes partially sulfided, the HDS activity tests show that MoP/SiO2 is fairly stable in the initial stage of the HDS reaction, providing further evidence that molybdenum phosphide is a promising catalytic material for industrial HDS reactions. Two kinds of surface sulfur species are formed on the sulfided catalyst: reversibly and irreversibly bonded sulfur species. The MoP/SiO2 catalyst remains stable in the HDS of thiophene because most sulfur species formed under HDS conditions are reversibly bonded on the catalyst surface. A detrimental effect of presulfidation on the HDS activity is observed for the MoP/SiO2 catalyst treated by H2S/H-2 at temperatures higher than 623 K, which is ascribed to the formation of a large amount of the irreversibly bonded sulfur species. The irreversibly sulfided catalyst can be completely regenerated by an oxidation and a subsequent reduction under mild conditions. (C) 2003 Elsevier Inc. All rights reserved.

含水层介质对氯酚类污染物的吸附-解吸特性

为探讨含水层介质对氯酚类污染物的吸附规律,以吉林市含水层介质--砂土为实验材料,采用批量吸附实验方法分别研究了2,4-二氯酚、2,4,6-三氯酚及五氯酚单独存在和共存条件下在砂土上的吸附-解吸行为,并对pH、离子强度对吸附过程的影响进行了探讨。结果表明,砂土对三种氯酚的吸附-解吸符合Freundlieh等温模型,吸附常数Kd分别为5.659、2.507和2.104,解吸常数分别为22.642、8.222和4.488;吸附反应符合二级吸附速率动力学方程,吸附速率常数K分别为0.4851kg·mg-1·h-1、0.0299kg·mg-1·h-1和0.1225kg·mg-1·h-1。氯酚在砂土上的吸附机理以疏水分配和配位体交换为主。在实验范围值内,吸附量随pH增加而减小,增加离子强度可以明显加强氯酚在砂土上的吸附.