美味猕猴桃和软枣猕猴桃种间杂交花粉管行为和早期胚胎发生的观察

美味猕猴桃(Actinidia deliciosa(A．Chev．)C．F．Liang and A．R．Ferguson)和软枣猕猴桃（Actinidia arguta）种间传粉后，花粉管在花柱内行为的荧光观察，以及早期胚胎发生的显微观察，结果如下： 1．花粉粒在柱头的乳头细胞表面萌发，在开放型的V形花柱道内生长。 2．花粉管生长速率比对照缓慢，到达胚珠珠孔的时间平均延迟50到60小时。 3．花粉管在花柱中下部出现形态变化：部分花粉管呈波纹状弯曲;花粉管顶端膨大，尖细或破裂;花粉管直径变化;花粉管解体。 4．花粉管胼胝质沉积的变化：胼胝质沿花粉管壁不规则沉积;有的膨大的花粉管顶端出现胼胝质;有的不出现胼胝质塞，而整个花粉管壁有胼胝质分布，荧光强烈。 5．基于显微结构和种子分析，种间杂交大约有30%的胚珠能够受精，并发育成为种子，种子的胚的大小和胚乳的量与对照有差别，有约70%或更多的表现不育或败育。胚发育为茄型，受精后台子保持休眠十几天后开始横分裂。传粉后七周形成子叶胚。胚发育较对照迟缓。胚乳细胞型。 6．种间杂交能够结实，正常种子占20% -30％，败育干瘪种子占10%左右，未受精胚珠占60%- 70％。种内传粉正常种子占95%，空瘪败育种子占0.7％，未受精胚珠占3.8％。 7．种间杂交果实大小、重量，种子大小及数目，胚的大小都比对照小。

小麦高分子量谷蛋白新亚基基因1Dx5’的克隆与分子标记

小麦是世界第一大粮食作物, 而HMW- GS 是直接影响小麦品质的重要因子。我国小麦面粉的烘烤品质普遍较差, 这与我国品种缺少优质的HMW- GS 有关，因此创造与发掘新的优质谷蛋白亚基编码基因，并开展相关生化、农学、分子生物学等方面研究、探讨优质的分子机理，对于培育优质小麦新品种具有重要意义。W958是我们培育的种间远缘杂交（T.durum Desf. ×T.aestivum L）优良品系，该品系在1D染色体上具有父母本没有的新型亚基，由于此亚基在SDS- PAGE电泳中具有和1Dx5亚基一样的电泳迁移率, 因此我们将该亚基命名为1Dx5’亚基。为了进一步从分子水平确证该亚基为新亚基和在育种中利用该亚基，本研究对该亚基的遗传规律、基因分子结构、品质特性和农艺性状等进行了分析。结果表明1Dx5’亚基在品质上与1Dx5亚基一样优质，对于品质的贡献大于1Dx2亚基。1Dx5’亚基具有特异的遗传规律，在分离群体中，此亚基占有极大的比例，该特性十分有利于将其导入高产小麦遗传背景中。此外，本研究扩增出了1Dx5’亚基基因的启动子区域、N－端区域和部分中间重复区域，并比较了1Dx5’和传统的1Dx5、1Dx2亚基在此区域氨基酸序列。结果进一步证明了1Dx5’是一个新的基因。通过蛋白质结构模拟分析，认为1Dx5’亚基的优良特性可能是由于1Dx5’亚基的的中部重复区域能形成分子间较强的氢键，加大了分子间的相互作用，使1Dx5’亚基的面团具有优良的品质，这为1Dx5’亚基的应用提供了理论基础。同时，本研究还设计用于区分1Dx5’和1Dx5等位基因的分子标记，解决了利用SDS-PAGE生化标记难以将二者区分的问题。Wheat is one of the major crops utilized worldwide. Nevertheless, due to the lackof the superior HMW- GS, the wheat quality in China is not satisfying. Therefore,identification and characterization of the superior HMW- GS will lay good foundation to the wheat breeding.W958 is a new bread wheat line developed by interspecific cross (T.durum Desf.×T.aestivum L). It contains a novel HMW- GS. We have designated such subunit as1Dx5’ here for its unique character. To confirm that such subunit is innovative andbeneficial for wheat breeding program on the molecular level, we have investigated itin terms of inheritance, DNA and protein sequence, dough property and agronomictrait associated with it. The result shows that 1Dx5’is as superior as 1Dx5 in terms of dough property.In addition, we have cloned the promoter, N- terminal as well as partial centralrepetitive domain of the allele coding for this subunit. Comparison of the amino acidsequence of 1Dx5’ with that of 1Dx5 and 1Dx2 showed that the superior quality of1Dx5’ subunit may result from the degree of conservation of the repetitive sequencesby which the glutenin polymers interact via inter-chain hydrogen bonds formedbetween the subunit repetitive domains with longer subunits forming more stableinteractions. In addition, we have developed two dominant molecular markers tofacilitate the discrimination of 1Dx5’ and 1Dx5 which could no be achieved by SDS-PAGE.

Three-Dimensional Propagation of the Transmitted Shock Wave in a Square Cross-Sectional Chamber

An investigation into the three-dimensional propagation of the transmitted shock wave in a square cross-section chamber was described in this paper, and the work was carried out numerically by solving the Euler equations with a dispersion-controlled scheme. Computational images were constructed from the density distribution of the transmitted shock wave discharging from the open end of the square shock tube and compared directly with holographic interferograms available for CFD validation. Two cases of the transmitted shock wave propagating at different Mach numbers in the same geometry were simulated. A special shock reflection system near the corner of the square cross-section chamber was observed, consisting of four shock waves: the transmitted shock wave, two reflection shock waves and a Mach stem. A contact surface may appear in the four-shock system when the transmitted shock wave becomes stronger. Both the secondary shock wave and the primary vortex loop are three-dimensional in the present case due to the non-uniform flow expansion behind the transmitted shock.

Cross-relaxation dynamics on anomalous saturation processes in low pressure supersonic cw HF chemical laser amplifier

It is assumed that both translational and rotational nonequilibrium cross-relaxations play a role simultaneoulsy in low pressure supersonic cw HF chemical laser amplifier. For two-type models of gas flow medium with laminar and turbulent flow diffusion mixing, the expressions of saturated gain spectrum are derived respectively, and the numerical calculations are performed as well. The numerical results show that turbulent flow diffusion mixing model is in the best agreement with the experimental result.

Evaluation of the Interfacial Adhesion between Brittle Coating and Ductile Substrate by Cross-Secitional Indention

The cross-sectional indentation method is extended to evaluate the interfacial adhesion between brittle coating and ductile substrate. The experimental results on electroplated chromium coating/steel substrate show that the interfacial separation occurs due to the edge chipping of brittle coating. The corresponding models are established to elucidate interfacial separation processes. This work further highlights the advantages and potential of this novel indentation method.

Numerical Investigation On Detonation Cell Evolution In A Channel With Area-Changing Cross Section

The two-dimensional cellular detonation propagating in a channel with area-changing cross section was numerically simulated with the dispersion-controlled dissipative scheme and a detailed chemical reaction model. Effects of the flow expansion and compression on the cellular detonation cell were investigated to illustrate the mechanism of the transverse wave development and the cellular detonation cell evolution. By examining gas composition variations behind the leading shock, the chemical reaction rate, the reaction zone length, and thermodynamic parameters, two kinds of the abnormal detonation waves were identified. To explore their development mechanism, chemical reactions, reflected shocks and rarefaction waves were discussed, which interact with each other and affect the cellular detonation in different ways.

Deformation Twin Formed By Self-Thickening, Cross-Slip Mechanism In Nanocrystalline Ni

We report the observation of a deformation twin formed by a recently proposed self-thickening, cross-slip twinning mechanism. This observation verifies one more twinning mechanism, in addition to those reported before, in nanocrystalline face-centered-cubic metals. In this mechanism, once the first Shockley partial is emitted from a grain boundary, and cross slips onto another slip plane, a deformation twin could nucleate and grow in both the primary and cross-slip planes without requiring the nucleation of additional Shockley partials from the grain boundary.

Resonant mode analysis in toroidal cavities with elliptic cross-sections

Resonant cavity modes in a torus with elliptical cross section are studied by means of a direct variational method. The nonlinear effects of toroidicity and ellipticity on the frequency of the basic mode are analyzed simply and systematically without the restriction of linear theory. It is shown that the toroidicity effect on the m = 0 transverse magnetic mode is less-than-or-equal-to 11%. The frequency of the mode shifts approximately 11-29% when the elongation of the cross section changes from 1 to 2. The effects of toroidicity and ellipticity differ for each resonant mode.

Two-dimensional short surface-waves of an oscillating cylinder with arbitrary shape of cross-section

The 2-D short surface waves produced by a partially submerged cylinder which performsarbitrary oscillating motion are discussed. The uniformly valid solution which is applicableto all kinds of cylinder wall cases at waterline point is obtained. It is pointed out that thesolution obtained by Holford[J] for the vertical oscillating motion of a cylinder is incomplete.The reason why his solution cannot go over to that for the case of vertical cylinder wall atwaterline point is also pointed out.

Evaluation of the Interfacial Adhesion between Brittle Coating and Ductile Substrate by Cross-Secitional Indention

The cross-sectional indentation method is extended to evaluate the interfacial adhesion between brittle coating and ductile substrate. The experimental results on electroplated chromium coating/steel substrate show that the interfacial separation occurs due to the edge chipping of brittle coating. The corresponding models are established to elucidate interfacial separation processes. This work further highlights the advantages and potential of this novel indentation method

Numerical Research on Liquid Spray in Supersonic Cross Flow

Numerical simulation was conducted to characterize the kerosene spray injecting into supersonic cross flow, especially focusing on the aerodynamic secondary breakup effect of the supersonic cross flow on the initial droplets. It was revealed that the initial parent drops were broken up into small drops whose diameter is about O(10) micrometers soon after they entered into the supersonic cross flow. During the appropriate range of initial drop size, the parent droplets would be broken up into small drops with the same magnitude diameter no matter how large the initial drops SMD was.

Topology of toroidal helical fields in non-circular cross-sectional tokamaks

The ordinary differential magnetic field line equations are solved numerically; the tokamak magnetic structure is studied on Hefei Tokamak-7 Upgrade (HT-7U) when the equilibrium field with a monotonic q-profile is perturbed by a helical magnetic field. We find that a single mode (m, n) helical perturbation can cause the formation of islands on rational surfaces with q = m/n and q = (m +/- 1, +/- 2, +/- 3,...)/n due to the toroidicity and plasma shape (i.e. elongation and triangularity), while there are many undestroyed magnetic surfaces called Kolmogorov-Arnold-Moser (KAM) barriers on irrational surfaces. The islands on the same rational surface do not have the same size. When the ratio between the perturbing magnetic field B-r(r) and the toroidal magnetic field amplitude B(phi)0 is large enough, the magnetic island chains on different rational surfaces will overlap and chaotic orbits appear in the overlapping area, and the magnetic field becomes stochastic. It is remarkable that the stochastic layer appears first in the plasma edge region.

Measurement of two-photon excitation cross-section of a new symmetric-type fluorene derivative

A new dye, 2,7-bis(4-methoxystyryl)-9,9-bis(2-ethylhexyl)-9H-fluorene, has been synthesized, which is a D-pi-D symmetrical-type fluorene derivative. The two-photon absorption (TPA) of this new dye has been experimentally studied by comparable two-photon-induced fluorescence method. This new dye has a TPA cross-section of 84 x 10(-50) cm(4) s/photon at 790 nm/13 fs. (c) 2004 Elsevier GmbH. All rights reserved.

Phase control of cross-phase modulation with electromagnetically induced transparency

We investigate a four-level double-Lambda atomic scheme interacting with four laser fields, a weak probe field, a weak signal field and two driven fields, in a closed-loop configuration. We study the Kerr nonlinearity associated with cross-phase modulation based on electromagnetically induced transparency. Our results show, in this closed-loop system, that the strength of cross-phase modulation and two-photon absorption are dependent critically on the relative phase between the excitation paths. By choosing the parameters appropriately, large cross-phase modulation can be achieved within a wide transparency window, while two-photon absorption is cancelled completely. The strength of cross-phase modulation can be enhanced much more by decreasing the intensities of two driven fields.