Addition reaction of nitrones on the reconstructed Si(100)-2 x 1 surface

The reaction of nitrone, N-methyl nitrone, and their hydroxylamine tautomers (vinyl-hydroxylamine and N-methyl vinyl-hydroxylamine) on the reconstructed Si(100)-2 x 1 surface has been investigated by means of hybrid density functional theory (B3LYP) and Moller-Plesset second-order perturbation (MP2) methods. The calculations predicted that both of the nitrones should react with the surface dimer via facile concerted 1,3-dipolar cycloaddition leading to 5-member-ring compounds. The reaction of hydroxylamine tautomers on the Si(100) surface follows pi-complex (intermediate) mechanism. For the reaction of N-methyl vinyl-hydroxylamine, the pi-complex intermediate undergoes [2+2] cycloaddition leading to a 4-member-ring compound. But in the reaction of vinyl-hydroxylamine, the intermediate undergoes H-migration reaction ("ene" reaction) resulting in the oxime-terminated Si surface. All the surface reactions result in the hydroxyl-terminated silicon surfaces, which are very useful for the further modification of the semiconductor.

Addition reactions of nitrones on the reconstructed C(100)-2 x 1 surfaces

In this paper, the reactions of nitrone, N-methyl nitrone, N-phenyl nitrone and their hydroxylamine tautomers (vinyl-hydroxylamine, N-methyl-vinyl-hydroxylamine and N-phenyl-vinyl-hydroxylamine) on the reconstructed C(100)-2 x 1 surface have been investigated using hybrid density functional theory (B3LYP), Moller-Plesset second-order perturbation (MP2) and multi-configuration complete-active-space self-consistent-field (CASSCF) methods. The calculations showed that all the nitrones can react with the surface "dimer" via facile 1.3-dipolar cycloaddition with small activation barriers (less than 12.0 kJ/mol at B3LYP/6-31g(d) level). The [2+2] cycloaddition of hydroxylamine tautomers on the C(100) surface follows a diradical mechanism. Hydroxylamine tautomers first form diradical intermediates with the reconstructed C(I 00)-2 x I surface by overcoming a large activation barrier of 50-60 kJ/mol (B3LYP), then generate [2+2] cycloaddition products via diradical transition states with negligible activation barriers. The surface reactions result in hydroxyl or amino-terminated diamond surfaces, which offers new opportunity for further modifications. (C) 2007 Elsevier B.V. All rights reserved.

Adlayer Structures of DL-Homocysteine and L-Homocysteine Thiolactone on Au(111) Surface: an in situ STM Study

The adsorption Of DL-homocysteine (Hcy) and L-homocysteine thiolactone (HTL) on Au(1 1 1) electrode was investigated in 0.1 M HClO4 by cyclic voltammetry and in situ scanning tunneling microscopy (STM). Hcy and HTL molecules formed highly ordered adlayers on Au(1 1 1) surface. High-resolution STM images revealed the orientation and packing arrangement in the ordered adlayers. Hcy molecules formed (2root3 x 3root3)R30degrees adlayer structure and H-bonds between carboxyl groups were assumed to be responsible for the origin of tail-to-tail or head-to-head molecular arrangement, while HTL molecules formed (4 x 6) adlayer structure, and two different orientations and appearances in the ordered adlayer were found. Structural models were proposed for the two adlayers.

Double synaptic weight neuron theory and its application

In this paper, a novel mathematical model of neuron-Double Synaptic Weight Neuron (DSWN)(l) is presented. The DSWN can simulate many kinds of neuron architectures, including Radial-Basis-Function (RBF), Hyper Sausage and Hyper Ellipsoid models, etc. Moreover, this new model has been implemented in the new CASSANN-II neurocomputer that can be used to form various types of neural networks with multiple mathematical models of neurons. The flexibility of the DSWN has also been described in constructing neural networks. Based on the theory of Biomimetic Pattern Recognition (BPR) and high-dimensional space covering, a recognition system of omni directionally oriented rigid objects on the horizontal surface and a face recognition system had been implemented on CASSANN-II neurocomputer. In these two special cases, the result showed DSWN neural network had great potential in pattern recognition.

Substrate surface atomic structure influence on the growth of InAlAs quantum dots

We have examined the influence of substrate surface orientation on self-assembled InAlAs/AlGaAs quantum dots grown on (0 0 1) and (n 1 1) A/B (n = 3, 5) GaAs substrates by molecular beam epitaxy (MBE). Preliminary characterizations have been performed using photoluminescence (PL) and transmission electron microscopy (TEM). The PL emission energies of quantum dots on high Miller index surface are found to be strongly dependent on the atomic-terminated surface (A or B surface) of the substrate. We observed that there were planar ordering larger islands on (3 1 1)B surface compared to (0 0 1) surface, in contrast, a rough interface and smaller "grains" on (3 1 1)A surface, this result is identical with PL emission energy from these islands. We propose that the rapid strain-induced surface "roughening" impedes the formation of 3D islands on A surface, and indicating that this is a promising approach of the realization of ordering distribution on (3 1 1)B plane for devices such as red-emitting semiconductor quantum dots lasers. (C) 1999 Elsevier Science B.V. All rights reserved.

Design and Fabrication of Low-microwave loss Coplannar Waveguide and precise V groove on Silicon Substrate for Optoelectronic Packaging - art. no. 601938

Optoelectronic packaging has become a most important factor that influences the final performance and cost of the module. In this paper, low microwave loss coplanar waveguide(CPW) on high resistivity silicon(HRS) and precise V groove in silicon substrate were successfully fabricated. The microwave attenuation of the CPW made on HRS with the simple process is lower than 2 dB/cm in the frequency range of 0 similar to 26GHz, and V groove has the accuracy in micro level and smooth surface. These two techniques built a good foundation for high frequency packaging and passive coupling of the optoelectronic devices. Based on these two techniques, a simple high resistivity silicon substrate that integrated V groove and CPW for flip-chip packaging of lasers was completed. It set a good example for more complicate optoelectronic packaging.

Surface plasmon waves generated by nanogrooves through spectral interference

A pure surface plasmon polariton (SPP) model predicted that the SPP excitation in a slit-groove structure at metallodielectric interfaces exhibits an intricate dependence on the groove width P. Lalanne et al. [Phys. Rev. Lett. 95, 263902 (2005); Nat. Phys. 2, 551 (2006)]. In this paper, we present a simple far-field experiment to test and validate this interesting theoretical prediction. The measurement results clearly demonstrate the predicted functional dependence of the SPP coupling efficiency on groove width, in good agreement with the SPP picture.

稀土墩子和稀土氧化物对甲醇在Pt催化剂上电催化氧化性能的影响

直接甲醇燃料电池( DMFC )具有甲醇来源丰富，价格低廉，在常温常压下是液体，易于携带储存；体积小，重量轻，结构简单，容易操作；维修方便，价格低等优点，近年来得到普遍的关注。然而，要达到DMFC的商品化还存在一些问题。其中一个是阳极催化剂的电催化活性低和易被甲醇氧化的中间产物，如CO毒化。对于甲醇阳极电催化剂人们进行了大量的研究，比较有效的都是Pt－过渡金属或金属氧化物复合催化剂，如Pt－Ru、 Pt－Sn、Pt佩Rh、Pt－Pd、Pt佩Re、Pt－Ru－Sn－W、Pt－WO。和Pt－TIO。等。本文研究了电解液中的稀土离子和与Pt形成复合催化剂的稀土氧化物对甲醇电催化氧化反应的促进作用，得到了如下的结果：1．电解液中的稀土Ho, Eu, Gd或Dy离子对甲醇在光滑Pt电极或DMFC中使用的Pt/C电极上的电催化氧化反应有促进作用，主要表现在的起始氧化电位负移和氧化电流增加。而电解液中加入其它种类的稀土离子对甲醇在光滑Pt电极或Pt/C电极上的电催化氧化反应有阻碍作用，如起始氧化电位正移，峰电流降低。Fu、H食Dy或Gd离子对一甲醇在Pt上的电催化氧化反应有促进作用的主要原因可能与这些稀土离子与甲醇生成配合物能力有关。2．不同Pt一稀土氧化物／C催化剂对甲醇电催化氧化反应有不同的影响。当稀土氧化物是Eu, Ho, Dy或Gd的氧化物时，甲醇在Pt一稀土氧化物／C催化剂上甲醇电催化氧化反应的极化性能和稳定性要优于在Pt/C催化剂上，而在其它的Pt-稀土氧化物／C催化剂上，甲醇电催化氧化的极化性能和稳定性要差于Pt/C电极。用不同方法制备的Pt一稀土氧化物／C催化剂对甲醇电催化氧化反应的促进作用取决于催化剂的制备方法。如先在活性碳上还原沉积Pt，再沉积上稀土氧化物所得的Pt－稀土氧化物／C催化剂的促进作用要优于先在稀土氧化物上还原沉积Pt，再一起沉积到活性碳上或先再活性碳上沉积稀土氧化物，再还原沉积上Pt的方法。另外，Pt和稀上氧化物的原子比为2：1时，pt－稀土氧化物／c催化剂对甲醇电催化氧化反应的催化活性最佳。稀土氧化物对pt／C催化剂对甲醇氧化反应的电催化性质的影响与稀土离子相似。但用稀土离子的方法比较简便，因此，相比之下，用稀土离子来促进甲醇在Pt上的电催化氧化反应方法较好。3．用Eu, Gd, Dy, Ho的氧化物制得的Pt-稀土氧化物／C复合催化剂对co的电催化氧化反应的催化活性要高于Pt/C催化剂。相对于的情况，在co在Eu, Gd, Dy,Ho的氧化物的Pt／稀土氧化物／C复合催化剂电极上的循环伏安图中，CO的氧化峰峰电位比在Pt/C电极的有不同程度的负移。吸．初步确定了电极和单体电池制备的较好的工艺参数和工作条件。在发明一种薄电极制备方法，确定最佳的电极催化层配方等的基础上，制得的单体电池，在25℃工作时，输出功率密度峰值达到28 mW/cm~2。

Surface Emitting Distributed Feedback Quantum Cascade Laser around 8.3 mu m

We demonstrate surface emitting distributed feedback quantum cascade lasers emitting at wavelengths from 8.1 mu m at 90 K to 8.4 mu m at 210 K. The second-order metalized grating is carefully designed using a modified coupled-mode theory and fabricated by contact lithography. The devices show single mode behavior with a side mode suppression ratio above 18 dB at all working temperatures. At 90 K, the device emits an optical power of 101 mW from the surface and 199 mW from the edge. In addition, a double-lobe far-field pattern with a separation of 2.2 degrees is obtained in the direction along the waveguide.

Nanocomposite based on depositing platinum nanostructure onto carbon nanotubes through a one-pot, facile synthesis method for amperometric sensing

Platinum nanoparticles (Pt NPs) were deposited onto multi-walled carbon nanotubes (MWNTs) through direct chemical reduction without any other stabilizing agents. Transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and cyclic voltammetry were employed to characterize the morphology of the as-prepared nanocomposite (noted as Pt NPs-MWNTs) and further identify the Pt NPs on the surface of MWNTs. The nanocomposite demonstrated the ability to electrocatalyze the oxidation of hydrogen peroxide and substantially raises the response current. A sensitivity of 591.33 mu A mM(-1) cm(-2) was obtained at Pt NPs-MWNTs modified electrode. Thus, we immobilized glucose oxidase (GOD) as a model enzyme on the nanocomposite-based electrode with a thin layer of Nafion to fabricate a glucose biosensor, which showed sensitive and fast response to glucose. The influence of the GOD loading was investigated and the biosensor with an enzyme loading concentration of 10 mg/mL shows optimal performance for glucose detection, that is, a detection limit of 3 mu M and a response time of 3 s, respectively.

吸附在Pt/C催化剂上Eu~(3+)对CO电氧化的促进作用

引言目前影响质子交换膜燃料电池(PEMFC)迅速发展并商业化的主要问题之一是阳极催化剂抗CO的毒化能力。Pt因其对氢的氧化具有高的催化活性而广泛地用作PEMFC的阳极催化剂,也有人研究将其它金属用于PEMFC阳极催化剂,但催化活性要比Pt低得多[1~4]。而Pt作PEMFC的阳极催化剂一个问题是痕量的CO,如10~100ppm就可以使Pt催化剂中毒[5,6]。现在的PEMFC一般用高压氢作为燃料,有很大的不安全性。人们提出用两种方法来解决这个问题,一是用甲醇、甲烷或汽油现场重整制氢作燃料的方法,但用这种制氢方法制得的氢气中含有大量的CO,即使经过纯化,也会含有ppm级的CO。另一个方法是直接用小分子醇类化合物,如甲醇作燃料,被称为直接醇燃料电池(DAFC)[7~11],但醇类化合物在阳极氧化时会有中间产物,如CO的产生,容易使阳极Pt催化剂中毒。因此,研究抗CO中毒的阳极催化剂已成为PEMFC和DAFC中一个很重要的研究课题。许多文章已报道Pt与其它贵金属或过渡金属的合金催化剂,或Pt与过渡金属氧化物的复合催化剂有一定的抗CO中毒能力。如Pt鄄Ru[12~16]、Pt鄄Bi[17]、Pt鄄Sn[17~19]...

碳载Pt-TiO_2复合催化剂对甲醇氧化的电催化性能

报道了通过化学还原和溶胶 -凝胶法制备不同组成的 Pt-Ti O2 /C催化剂及其对甲醇的氧化反应 .结果表明 ,该催化剂具有很好的电催化活性和稳定性 .催化剂中的 Ti和 Pt的原子比为 1 /2时 ,催化剂的性能最好 .在 5 0 0℃下热处理后 ,催化剂的性能得到进一步的改善 .这种催化剂有望能在 DMFC中获得实际使用.

Molecular dynamics simulation of hydrogen enhancing dislocation emission

The interactive pair potential between Al and H is obtained based on the ab initio calculation and the Chen-Mobius 3D lattice inversion formula. By utilizing the pair potentials calculated, the effects of hydrogen on the dislocation emission from crack tip have been studied. The simulated result shows that hydrogen can reduce the cohesive strength for Al single crystal, and then the critical stress intensity factor for partial dislocation emission decreases from 0.11 MPa root m (C-H = 0) to 0.075 MPa root m (C-H=0.72%) and 0.06 MPa root m (C-H = 1.44%). This indicates thar hydrogen can enhance the dislocation emission. The simulation also shows that atoms of hydrogen can gather and turn into small bubbles, resulting in enhancement of the equilibrium vacancy concentration.

Discussions on slip length measurements by microPIV/PTV in microchannels

Fluid transportation in microfluidic system could be benefit from the slip on solid-liquid interface. Slip length on many kinds of hydrophilic/hydrophobic surfaces have been measured recently. The two common-used experimental methods for boundary slip measurement include: (1) surface force measurement, such as surface force apparatus (SFA), atom force microscope (AFM), and (2) velocity measurement, like microPIV/PTV (Particle image velocimetry / Particle tracking velocimetry), total internal reflection velocimetry (TIRV). However, the measured results are rather scattered, larger measured slip lengths were reported by microPIV/PTV experiments. In this paper, we will investigate the deviations of the measured slip length on smooth hydrophilic surface. After measuring detailed velocity profiles very close to hydrophilic glass wall, we give a discussion on the effects influencing the slip measurements.