四类气候－植被关系模型的比较研究

本研究应用数字地球技术，基于1950年～1980年的全国958个气象站的基本气象数据（包括气象站的经纬度，海拔，月均温，月降水，年均温， 年降水，日照时数，日照百分率，风速等），比较了四个不同的根据水、热平衡原理设计的气候一植被关系模型(Penman模型、Holdridge生命地带系统、和Kira方法Thomthwaite模型)在中国应用的一致性和适用性。结果表明：(1) Penman模型在温带草原区和青藏高原地区的一致性指数超过50%，在青藏高原最出色，最有发展潜力。(2) Thornthwaite模型在热带雨林、季雨林区达到39. 72%，可以弥补Holdridg模型在热带地区分类精度的不足。(3) Holdridg生命地带系统在不同地带间适用性最广;只在热带地区，例如西部季雨林、雨林区域(52)、西部草原亚区域(63)和青藏高原温性荒漠地带(86)以及青藏高原温性草原地带(84)不理想。(4)吉良(Kira)方法在亚热带常绿阔叶林区可与Holdridg模型相媲美;在低海拔和湿润、半湿润地区效果尚可，但在温带荒漠区与青藏高原区的模拟效果与实际相差较远。 这四个传统的分类方法在中国植被区划一级分类上是适用的，Holdridge生命地带系统KAPPA -致性指数达到0.57模拟效果优于其它三者，但在特定地区，如青藏高原，所有模型均需改进优化或启用新的模型因子才能很好地区分植被亚地带。本研究还指出，数字地球技术的应用有助于推动气候一植被关系的研究，尤其在气候一植被指标（气候参数和模型参数）的大范围实时动态监测、气候一植被关系数据的海量信息高效、有序基础管理和功能型模型库支撑框架体系方面。

西北干旱区多种植物地理分布与气候的相关性及其可能潜在分布预测

　　作为西部大开发的关键地区，西北干旱区由于地理位置和环境条件的独特性、生态系统的脆弱性以及人类活动的长期干扰，对其周边乃至全国的生态环境有较大的影响，在这一地区研究植物种分布与气候的关系，并模拟预测其可能的潜在分布范围，具有理论上和实践上的重要意义。 　　通过广泛收集了西北干旱区优势种和常见种的地理分布资料，共选择128个植物种，利用Holdridge的生命地带分类系统，计算各植物种的生物温度(BT)、可能蒸散(PE)、降水量(P)及可能蒸散率(PER)，分析植物种与气候的相互关系，并将所有植物种进行经验归纳分类。随后，对这砦植物种及其气候信息进行TWINSPAN定量分类，并与经验分类结果相比较，得出西北干旱区128种植物的生态气候分类，分属于以下几大类型：高寒草甸、森林一草原过渡带、草原（典型草原、荒漠草原）、荒漠（草原化荒漠、荒漠、高寒荒漠）。具体来说，包括以下17个生态气候类型： 1)高寒草甸：异针茅。 2)森林一草原过渡带：牛尾蒿、鬼箭锦鸡儿、沙棘。 3)草原a：沙蒿。 4)草原b：长芒草、百里香（变种）、多叶隐子草、贝加尔针茅、大针茅。 5)草原c：羊茅、小叶锦鸡儿、荒漠锦鸡儿、线叶菊、华北岩黄芪、廿青针茅、碱蒿、内蒙古沙蒿、裂叶蒿、狭叶锦鸡儿、山竹岩黄芪、女蒿、小蓬、两伯利亚杏、沙地柏、角果碱篷、霸王、糙隐子草。 6)草原d：紫狐茅、紫花针茅。 7)草原一荒漠草原a：包括沙竹、琵琶柴、吉尔吉斯针茅。 8)草原一荒漠草原b：华北米蒿、差巴嘎蒿、星星草、长芒针茅、铁竿蒿、柠条锦鸡儿。 9)荒漠草原：沙生冰草、蒙古冰草、羊草、冷蒿、中亚紫菀木、刺旋花、老瓜头、木贼麻黄、西伯利亚白刺、唐古特白刺、戈壁针茅、石生针茅、盐地碱蓬、冰草、蓍状亚菊、油蒿、木蓼、刺针枝蓼、长枝木蓼、中间锦鸡儿、尖叶盐爪爪、黄花琵琶柴、松叶猪毛菜、珍珠猪毛菜、东方针茅、囊果碱蓬、四合木、白滨藜、短脚锦鸡儿。 10)草原化荒漠，荒漠a：川青锦鸡儿、优若藜、苦艾蒿、无芒隐子草、沙冬青、籽蒿、地白蒿、菭草、齿叶白刺、绵刺、盐角草、多枝柽柳、盐生假木贼。 11)草原化荒漠．荒漠b：蒿叶猪毛菜、短花针茅、芨芨草、灌木亚菊、博乐蒿、小蒿、喀什蒿、南山短花菊、盐爪爪、木本猪毛菜、针茅、细枝盐爪爪。 12)草原化荒漠．荒漠c：白梭梭、白羊草、无叶假木贼。 13）干旱荒漠a：戈壁短花菊、荒漠细柄茅、刺蓬、沙生针茅、多花柽柳、细枝柽柳。 14)干旱荒漠b：梭梭柴、铃铛刺、天山猪毛菜、帕米尔麻黄、座花针茅、旱蒿、克氏狐茅、短叶假木贼、准格尔沙蒿、长穗柽柳、刚毛柽柳。 15)高寒荒漠植被：匍生优若藜。 16)干旱荒漠c：粉花蒿、白杆沙拐枣、膜果麻黄、花花柴、灌木紫菀木、裸果木、合头草、塔里木沙拐枣。 17)超干旱荒漠植被：沙拐枣、胡杨、盐穗木、灰杨、盐节木、圆叶盐爪爪。 　　综合分类结果表明：多数植物种的生态气候类型与实际生境相符，但也有少数植物种有明显偏差，主要原因有三点：首先，某些种的分布范围超出了西北干旱区，在东北、华北、甚至全国范围内分布，所计算的植物种的气候范围本身存在局限性;其次，西北干旱区的研究资料如植物种的分布范围、分布点的气象资料等有许多缺失：最后，由于文献中对某些植物种分布范围的描述比较笼统，无法确定其精确的地理分布界限，使得植物种所对应的分类结果与其真正所属的植 被类型有一些偏差。 　　本文还进一步在这128种植物中选取了10种分布明确、资料齐备的代表性植被类型的优势种，根据它们的降水和生物温度指标，模拟预测了它们的可能潜在分布区，包括其主要中心分布区和最大可能分布区，并与实际分布范围进行比较。结果表明．其潜在分布区的分布范围与实际调查所得资料所处范围基本一致，特别是中心分布区的预测图，而最大可能分布区与实际有一定误差。

Population growth and physiological characteristics of microalgae in a miniaturized bioreactor during space flight

A strain of microalgae (Anabaena siamensis) had been cultured in a miniaturized bioreactor during a retrievable satellite flight for 15 days. By means of remote sensing equipment installed in the satellite, we gained the growth curve of microalgae population in space every day in real time. The curve indicated that the growth of microalgae in space was slower than the control on ground. Inoculation of the retrieved microalgae culture showed that the growth rate was distinctively higher than ground control. But after several generations, both cultures indicated similar growth rates. Those data showed that algae, can adapt to space environment easily which may be valuable for designing more complex bioreactor and controlled ecological life support system in future experiment. (C) 2006 Elsevier Ltd. All rights reserved.

Influence of convections on dopant segregation in floating-zone crystal-growth system

The steady and axisymmetric crystal growth process of floating zone model was studied numerically to concern with the influence of convection and phase change on effective segregation. An iteration method of numerical simulation considering both thermocapillary and buoyancy effects for GaAs crystal growth gave the effective segregation coefficient, which was compared with the space experiment of GaAs on board the Chinese recoverable satellite. The calculated segregation coefficient of a two-dimensional model was found to be smaller than the one suggested by space experiment with the simplified assumption of an one-dimensional model.

Influence of Local Magnetic Fields on P-Doped Si Floating Zone Melting Crystal Growth in Microgravity

A two-dimensional axisymmetric numerical model is presented to study the influence of local magnetic fields on P-doped Si floating zone melting crystal growth in microgravity. The model is developed based on the finite difference method in a boundary-fitted curvilinear coordinate system. Extensive numerical simulations are carried out, and parameters studied include the curved growth interface shape and the magnetic field configurations. Computed results show that the local magnetic field is more effective in reducing the impurity concentration nonuniformity at the growth interface in comparison with the longitudinal magnetic field. Moreover, the curved growth interface causes more serious impurity concentration nonuniformity at the growth interface than the case with a planar growth interface.

Investigation on Depth of Heat Affected Zone of Discharge Spot by High Repetitive Rate YAG Laser-Induced Discharge Texturing

It is known that the press formability and the elongation of laser textured sheet are improved, and the service life of textured roll is longer than that of the un-textured roll due to hardening of the treated surface. One of the goals to develop high repetitive rate YAG laser-induced discharge texturing (LIDT) is to get deeper hardening zone. By observing and measuring cross-section of LIDT spots in different discharge conditions, it is found that the single-crater, which is formed by the discharge conditions of anode, which is covered by an oil film and with rectangular current waveform, has the most depth of heat affected zone (HAZ) comparing with other crater shapes when discharge energy is the same. The depth of HAZ is mainly depends on pulse duration when the discharge spot is single-crater. The results are analyzed.

Characterization of a Laser-Discrete Quenched Steel Substrate/Chromium System by Dissolving Coatings

A laser-discrete quenched steel (LDQS) substrate/as-deposited chromium (top high-contraction (HC) and underlying low-contraction (LC) chromium) system was investigated by dissolving coatings in order to reveal the mechanism that the service life of the coated parts is largely improved using the hybrid technique of laser pre-quenching plus chromium post-depositing. It was found that the surface characteristics of the substrate, LC and HC chromium layer can be simultaneously revealed owing to the dissolution edge effect of chromium coatings. Moreover, the periodical gradient morphologies of the LDQS substrate are clearly shown: the surfaces of laser transformation-hardened regions are rather smooth; a lot of fine micro-holes exist in the transition zones; there are many micro-dimples in the original substrate. Furthermore, the novel method of dissolving coatings with sharp interfaces may be used to reveal the structural features of a substrate/coating system, explore the effect of the substrate on the initial microstructure and morphologies of coatings, and check the quality of the coated-parts.

Instability from steady and axisymmetric to steady and asymmetric floating half zone convection in a fat liquid bridge of larger Prandtl number

The linear instability analysis of the present paper shows that the thermocapillary convection in a half floating zone of larger Prandtl number has a steady instability mode w(i) = 0 and m = 1 for a fat liquid bridge V = 1.2 with small geometrical aspect ratio A = 0.6. This conclusion is different from the usual idea of hydrothermal instability, and implies that the instability of the system may excite a steady and axial asymmetric state before the onset of oscillation in the ease of large Prandtl number.

Determination Ofinterfacial Mechanical Parameters For An Al/Epoxy/Al2O3 System Byusing Peel Test Simulations

Peel test measurements and simulations of the interfacial mechanical parameters for the Al/Epoxy/Al2O3 system are performed in the present investigation. A series of Al film thicknesses between 20 and 250 microns and three peel angles of 90, 135 and 180 degrees are considered. Two types of epoxy adhesives are adopted to obtain both strong and weak interface adhesions. A finite element model with cohesive zone elements is used to identify the interfacial parameters and simulate the peel test process. By simulating and recording normal stress near the crack tip, the separation strength is obtained. Furthermore, the cohesive energy is identified by comparing the simulated steady-state peel force and the experimental result. It is found from the research that both the cohesive energy and the separation strength can be taken as the intrinsic interfacial parameters which are dependent on the thickness of the adhesive layer and independent of the film thickness and peel angle.

Numerical simulation of g-jitter effects on half floating zone convection under microgravity environment

The g-jitter effects on the thermocapillary convection in liquid bridge of floating half zone were studied by numerical simulation for unsteady and axi-symmetric model in the cylindrical coordinate system. The g-jitter field was given by a steady microgravity field in addition to an oscillatory low-gravity field, and the effects on the flow field, temperature distribution and free surface deformation were analyzed numerically.

Influence of low-gravity level on crystal-growth in floating-zone

The influence of low gravity level on crystal growth in the floating zone, which involves thermocapillary convection, phase change convection, thermal and solutal diffusion, is investigated numerically by a finite element method for the silicon crystal growth process. The velocity, temperature, concentration fields and phase change interfaces depending on heating temperature and growth rates are analyzed. The influence of low gravity level on the concentration is studied especially. The results show that the non-uniformities of concentration are about 10(-3) for growth rate nu(p) = 5.12 x 10(-8) m/s, 10(-2) for nu(p) = 5.12 x 10(-7) m/s and relatively larger for larger growth rate in the gravity level g = 0-9.8 m/s2. The thermocapillary effect is strong in comparison with the Bridgman system, and the level of low gravity is relatively insensitive for lower growth rates.

Investigations of cohesive zone properties of the interface between metal film and ceramic substrate at nano- and micro-scales

Cohesive zone characterizations of the interface between metal film and ceramic substrate at micro- and nano-scales are performed in the present research. At the nano-scale, a special potential for special material interface (Ag/MgO) is adopted to investigate the interface separation mechanism by using MD simulation, and stress-separation relationship will be obtained. At the micro-scale, peeling experiment is performed for the Al film/Al2O3 substrate system with an adhesive layer at the interface. Adhesive is a mixture of epoxy and polyimide with mass ratio 1:1, by which a brittle cohesive property is obtained. The relationships between energy release rate, the film thickness and the adhesive layer thickness are measured during the steady-state peeling. The experimental result has a similar trend as modeling result for a weak adhesion interface case.

Developing A Microfluidic-Based System To Quantify Cell Capture Efficiency

Micro-fabrication technology has substantial potential for identifying molecular markers expressed on the surfaces of tissue cells and viruses. It has been found in several conceptual prototypes that cells with such markers are able to be captured by their antibodies immobilized on microchannel substrates and unbound cells are flushed out by a driven flow. The feasibility and reliability of such a microfluidic-based assay, however, remains to be further tested. In the current work, we developed a microfluidic-based system consisting of a microfluidic chip, an image grabbing unit, data acquisition and analysis software, as well as a supporting base. Specific binding of CD59-expressed or BSA-coupled human red blood cells (RBCs) to anti-CD59 or anti-BSA antibody-immobilized chip surfaces was quantified by capture efficiency and by the fraction of bound cells. Impacts of respective flow rate, cell concentration, antibody concentration and site density were tested systematically. The measured data indicated that the assay was robust. The robustness was further confirmed by capture efficiencies measured from an independent ELISA-based cell binding assay. These results demonstrated that the system developed provided a new platform to effectively quantify cellular surface markers effectively, which promoted the potential applications in both biological studies and clinical diagnoses.