Equivalent Model Of Expansion Of Cement Mortar Under Sulphate Erosion

The expansion property of cement mortar under the attack of sulfate ions is studied by experimental and theoretical methods. First, cement mortars are fabricated with the ratio of water to cement of 0.4, 0.6, and 0.8. Secondly, the expansion of specimen immerged in sulphate solution is measured at different times. Thirdly, a theoretical model of expansion of cement mortar under sulphate erosion is suggested by virtue of represent volume element method. In this model, the damage evolution due to the interaction between delayed ettringite and cement mortar is taken into account. Finally, the numerical calculation is performed. The numerical and experimental results indicate that the model perfectly describes the expansion of the cement mortar.

Surface Stress Induced By Adatoms Adsorption On Solid Surfaces

Based on the statistical thermodynamics theory, a theoretical model of adsorbate induced surface stress of adatoms adsorption on solid surface is presented. For the low coverage, the interaction between the adsorbed molecules is entirely negligible and the adsorption induced surface stress is found to be the function of the coverage and the adsorption energy change with strain. For the high coverage, the adsorbate-adsorbate interaction contributes to the adsorption-induced surface stress effectively. In the case of carbon adsorption on the Ni(100) surface, the value of 0.5 is obtained as a characteristic coverage to decide whether to take the interaction between the adsorabtes into consideration and the results also show that the adsorption induces a compressive surface stress.

Measurement Of Fracture Toughness And Interfacial Shear Strength Of Hard And Brittle Cr Coating On Ductile Steel Substrate

The fracture toughness and interfacial adhesion properties of a coating on its substrate are considered to be crucial intrinsic parameters determining performance and reliability of coating-substrate system. In this work, the fracture toughness and interfacial shear strength of a hard and brittle Cr coating on a normal medium carbon steel substrate were investigated by means of a tensile test. The normal medium carbon steel substrate electroplated with a hard and brittle Cr coating was quasi-statically stretched to induce an array of parallel cracks in the coating. An optical microscope was used to observe the cracking of the coating and the interfacial decohesion between the coating and the substrate during the loading. It was found that the cracking of the coating initiated at critical strain, and then the number of the cracks of the coating per unit axial distance increased with the increase in the tensile strain. At another critical strain, the number of the cracks of the coating became saturated, i.e. the number of cracks per unit axial distance became a constant after this critical strain. Based on the experiment result, the fracture toughness of the brittle coating can be determined using a mechanical model. Interestingly, even when the whole specimen fractured completely under an extreme strain of the substrate, the interfacial decohesion or buckling of the coating on its substrate was completely absent. The test result is different from that appeared in the literature though the identical test method and the brittle coating/ductile metal substrate system are taken. It was found that this difference can be attributed to an important mechanism that the Cr coating on the steel substrate has a good adhesion, and the ultimate interfacial shear strength between the Cr coating and the steel substrate has exceeded the maximum shear flow strength level of the steel substrate. This result also indicates that the maximum shear flow strength level of the ductile steel substrate can be only taken as a lower bound estimate on the ultimate shear strength of the interface. This estimation of the ultimate interfacial shear strength is consistent with the theoretical analysis and prediction presented in the literature.

Recurrence plot analysis of DNA sequences

Recurrence plot technique of DNA sequences is established on metric representation and employed to analyze correlation structure of nucleotide strings. It is found that, in the transference of nucleotide strings, a human DNA fragment has a major correlation distance, but a yeast chromosome's correlation distance has a constant increasing. (C) 2004 Elsevier B.V All rights reserved.

爆炸法制备Sm_2Fe_(17)N_y永磁体

本文介绍了爆炸烧结Sm_2Fe_(17)N_7永磁体的试验及其结果.试验时,在外加磁场下把Sm_2Fe__(17)N_y磁粉取向压制成形后装人金属包套内并抽真空,炸药装在包套外的纸筒内,雷管引爆炸药后,在爆轰压力作用下,磁粉被压实而烧结成磁体。试验结束后,取出磁体测量密度及磁性参数。烧结磁体密度在理论密度6的85％～96％范围内,磁能积大于88 KJ?m~(-3)。它表明,爆炸烧结工艺是制备Sm_2Fe_(17)Ny永磁体的有效工艺。

地幔对流模拟实验

模拟实验是当前地幔对流研究中的一个重要手段,一个重要组成部分。本文着重介绍近年来关于地幔热对流模拟实验研究发展概况。从相似参数出发,讨论了实验装置,测试手段,并对实验结果和今后发展趋势作了评述。

烧蚀产物对空气辐射影响的实验研究

本文利用低密度激波管和辐射计,在不同的温度和密度状态下,就杂质辐射在分谱和累积辐射条件下对高温空气平衡辐射的影响进行的实验研究;给出了在不同条件下的实验结果,并做了简单分析。实验结果表明:少量杂质对高温空气平衡辐射的影响较大,这为计算尾流辐射场时,考虑杂质辐射的影响提供了实验依据。

有序熔楔和转捩

本文研究烧蚀表面上的一种尖楔状沟槽,简称熔楔。实验表明,熔楔是边界层转捩区的一种烧蚀现象;在蜂蜡和一些高温材料的球头上,熔楔排列有序,形成规则图象。在所实验的参数范围内,熔楔的条数保持在20条左右,不随来流马赫数、球头半径和烧蚀材料类型不同而改变。在分析研究熔楔内部结构和外流条件的基础上,本文提出熔楔形成机理和内外流动模型的设想,并对熔楔的形态、分布以及由它引导出菱形花纹等现象作了解释。

Free surface vibration in oscillatory convection of half floating zone

Projecting an orthographical grating mask (20pl/mm) on the surface of a small liquid bridge and receiving the reflected distortion image, one can calculate out reversely the shape of free surface of a liquid bridge. In this way we measured the surface shape of a small floating zone and the two-dimensional deformation of its vibration. The mechanism of thermocapillary oscillatory convection and the three-dimensional variation of the free surface are revealed experimentally. The principle for space experiment has been studied in our laboratory.

五轴框架式机器人激光加工系统轨迹算法研究

在集成化智能激光加工系统工作原理的基础上提出了五轴机器人的激光加工轨迹算法。将三维离散数据点集拟合为空间参数曲面，在此参数曲面上规划五轴激光加工的等距轨迹。给出了冲压模具激光强化加工实例，取得了理想的加工效果。

EQUIVALENT MODEL OF EXPANSION OF CEMENT MORTAR UNDER SULPHATE EROSION

The expansion property of cement mortar under the attack of sulfate ions is studied by experimental and theoretical methods. First, cement mortars are fabricated with the ratio of water to cement of 0.4, 0.6, and 0.8. Secondly, the expansion of specimen immerged in sulphate solution is measured at different times. Thirdly, a theoretical model of expansion of cement mortar under sulphate erosion is suggested by virtue of represent volume element method. In this model, the damage evolution due to the interaction between delayed ettringite and cement mortar is taken into account. Finally, the numerical calculation is performed. The numerical and experimental results indicate that the model perfectly describes the expansion of the cement mortar.

Deformation Of Pdms Membrane And Microcantilever By A Water Droplet: Comparison Between Mooney-Rivlin And Linear Elastic Constitutive Models

In this paper, we studied the role of vertical component Of Surface tension of a water droplet on the deformation of membranes and microcantilevers (MCLs) widely used in lab-on-a-chip and micro-and nano-electromechanical system (MEMS/NEMS). Firstly, a membrane made of a rubber-like material, poly(dimethylsiloxane) (PDMS), was considered. The deformation was investigated using the Mooney-Rivlin (MR) model and the linear elastic constitutive relation, respectively. By comparison between the numerical solutions with two different models, we found that the simple linear elastic model is accurate enough to describe such kind of problem, which would be quite convenient for engineering applications. Furthermore, based on small-deflection beam theory, the effect of a liquid droplet on the deflection of a MCL was also studied. The free-end deflection of the MCL was investigated by considering different cases like a cylindrical droplet, a spherical droplet centered on the MCL and a spherical droplet arbitrarily positioned on the MCL. Numerical simulations demonstrated that the deflection might not be neglected, and showed good agreement with our theoretical analyses. (C) 2008 Elsevier Inc. All rights reserved.

强散射体产生的像面散斑对比度与随机表面及成像系统关系的研究

We study the statistical properties of the image speckles produced by strong-scattering objects in the 4f optical imaging system. Using the generic expression of the complex amplitude of speckles and the approximation of the double-exponential function, we first obtain the ensemble average of the speckle intensity. Then we derive the variance of the speckle intensity based on the rotational transformation of the real and imaginary parts of the complex amplitude of speckles. We finally obtain the expression for the contrast of the. speckles, which is explicitly related to the statistical parameters of random surface and to the parameters of the imaging system. Our results are an obvious improvement compared with those reported in the literature, where the relations including such implicit quantities as the average size of the scattering grains of the random surface and the number of scattering grains are usually used. The results of this paper would be helpful for the characterization of random surface by speckle contrast.