20 resultados para 189-1172
Resumo:
建议189W一个新的简单衰变纲图。指定189Re能量为470.4keV和489.8keV的2个新能级。改进了先前189Re的能级信息。
Resumo:
用14.8 MeV中子同天然锇反应, 取道192O(n, α) 反应产生189W。通过放射化学分离流程, 从反应产物中分出W。用高纯Ge探测器完成放射性W样品γ射线单谱的测量。在189Re激发能级文献值的基础上并依据衰变和能级的关系以及189W衰变的γ射线能量和相对强度的实验数据, 给出了建议的189W衰变纲图。
Resumo:
给出了迄今为止实验中测得的新发现的189W的衰变数据——射线能量、半衰期和相对强度等,作为文献值;并将实验结果同文献值进行了比较。丰富了已测得的189W半衰期的文献值
Resumo:
High-spin states in Pt-189 have been studied with the in-beam gamma-spectroscopy method via the Yb-176(O-18, 5n) reaction at beam energies of 88 MeV and 95 MeV. A new level scheme of Pt-189 has been established. Rotational bands based on the upsilon i(13/2)(-1), upsilon f(5/2)(p(3/2)) and upsilon i(13/2)(-2)upsilon f(p(3/2)) configurations, as well as several structures with irregular level spacings, have been observed. Properties of rotational bands have been analyzed in the framework of triaxial particle-rotor model. A gamma similar to -30 degrees triaxial shape and a near prolate shape have been proposed to the upsilon i(13/2)(-1) and uf(5/2)(p(3/2)) bands, respectively. Two Delta I=2 transition sequences with similar energies have been observed, and they have been proposed to be associated with the upsilon i(13/2)(-1)upsilon f(5/2)(p(3/2)) configuration. According to the relevant Nilsson orbitals, the bands built on the upsilon i(13/2)(-1)upsilon f(5/2)(p(3/2)) configuration could be interpreted as a pair of pseudo-spin partner.
Resumo:
Racemic cis-BCH-189 can be resolved to (-)-enantiomer (lamivudine) and (+)-enantiomer by esterification of cis-2-hydroxymethyl-5-(N-4(')-acetylcytosine-1'-yl)-1,3-oxathiolane and (+)-menthyl chloroformate in CH3CN with pyridine as base. The two diastereomers of ester were seperated by recrystallization in methanol at 0degreesC. Lamivudine was obtained by deprotection of (-)-diastereomer with high yield.
Resumo:
The target compound BCH-189 was synthesized with high yield via four steps from benzoyloxy acetylaldehyde and p-dithiane-2,5-diol as starting materials. The synthetic route is preferable to what literature reported.
Resumo:
An analytical-numerical method is presented for analyzing dispersion and characteristic surface of waves in a hybrid multilayered piezoelectric plate. In this method, the multilayered piezoelectric plate is divided into a number of layered elements with three-nodal-lines in the wall thickness, the coupling between the elastic field and the electric field is considered in each element. The associated frequency dispersion equation is developed and the phase velocity and slowness, as well as the group velocity and slowness are established in terms of the Rayleigh quotient. Six characteristic wave surfaces are introduced to visualize the effects of anisotropy and piezoelectricity on wave propagation. Examples provide a full understanding for the complex phenomena of elastic waves in hybrid multilayered piezoelectric media.
Resumo:
Mechanical behavior and microstructure evolution of polycrystalline copper with nano-twins were investigated in the present work by finite element simulations. The fracture of grain boundaries are described by a cohesive interface constitutive model based on the strain gradient plasticity theory. A systematic study of the strength and ductility for different grain sizes and twin lamellae distributions is performed. The results show that the material strength and ductility strongly depend on the grain size and the distribution of twin lamellae microstructures in the polycrystalline copper.
Resumo:
将晶界及其影响区综合考虑,建立了考虑晶界效应的力学模型,结合晶体塑性理论,利用有限变形有限元法,对多晶体进行数值模拟.数值结果显示了细观层次下晶粒度形场的特点,理论计算同实验定性一致.
Resumo:
采用田间观测和数值模拟相结合的方法连续3年监测计算结果表明,土体积盐多少与农田蒸发量的大小有直接关系,一般冬春土壤含盐量低,夏秋高.土壤含盐量随降雨、蒸发、灌溉等因素而变化,但在总体上处于动态平衡之中.在荒裸土地上,土壤积盐量上升较快.灌溉的淋盐作用十分明显.在目前自然因素和农耕活动中,不会发生土地重新盐渍化.
Resumo:
本文对早期疲劳设计方法,包括无限寿命设计、安全寿命设计、破损-安全寿命设计、损伤容限设计作了简单的回顾,对可靠性设计新方法作了详尽描述,同时还对疲劳寿命估算中的名义应力法与局部应力应变法进行了比较,最后对今后这课题的研究提出了一些建议。
Resumo:
<正> 国外热网管道热损失测试多半采用热流计、红外测温仪、点温计等测试手段来实现。但现场测试时往往受到风、日照等非稳态影响。为探讨现场测试方法的可行性,采用了热流计法、表面温度法、温差法和焓降法来测量热网管道热损失。a.热流计法:用热流计直接测量管道保温层外表面热损失。b.表面温度法:测量管道保温层外表面温度、环境温度和风速,按对流换热和辐射换热公式来计算管道热损失。c.温差法:根据管道保温层内、外表面温度,内、外径以及实验室测得的保温材料导热系数,按径向一维导热计