Progressive 3D reconstruction of infrastructure with videogrammetry

A number of methods are commonly used today to collect infrastructure's spatial data (time-of-flight, visual triangulation, etc.). However, current practice lacks a solution that is accurate, automatic, and cost-efficient at the same time. This paper presents a videogrammetric framework for acquiring spatial data of infrastructure which holds the promise to address this limitation. It uses a calibrated set of low-cost high resolution video cameras that is progressively traversed around the scene and aims to produce a dense 3D point cloud which is updated in each frame. It allows for progressive reconstruction as opposed to point-and-shoot followed by point cloud stitching. The feasibility of the framework is studied in this paper. Required steps through this process are presented and the unique challenges of each step are identified. Results specific to each step are also presented.

Automated sparse 3D point cloud generation of infrastructure using its distinctive visual features

The commercial far-range (>10 m) spatial data collection methods for acquiring infrastructure’s geometric data are not completely automated because of the necessary manual pre- and/or post-processing work. The required amount of human intervention and, in some cases, the high equipment costs associated with these methods impede their adoption by the majority of infrastructure mapping activities. This paper presents an automated stereo vision-based method, as an alternative and inexpensive solution, to producing a sparse Euclidean 3D point cloud of an infrastructure scene utilizing two video streams captured by a set of two calibrated cameras. In this process SURF features are automatically detected and matched between each pair of stereo video frames. 3D coordinates of the matched feature points are then calculated via triangulation. The detected SURF features in two successive video frames are automatically matched and the RANSAC algorithm is used to discard mismatches. The quaternion motion estimation method is then used along with bundle adjustment optimization to register successive point clouds. The method was tested on a database of infrastructure stereo video streams. The validity and statistical significance of the results were evaluated by comparing the spatial distance of randomly selected feature points with their corresponding tape measurements.

Progressive Site Modelling with Videogrammetry

A number of methods are commonly used today to collect as-built spatial data (time-of-flight, visual triangulation, etc.). However, current practice lacks a solution that is accurate, automatic and cost-efficient at the same time. LiDARmethods generate high resolution depth information, but the significant cost of the equipment counteracts their benefits for the majority of construction projects. This is true especially for small projects, where projected savings hardly justify adopting this technology. Vision-based technologies, such as videogrammetry, is potentially able to address the existing limitations.

Three-Dimensional Tracking of Construction Resources using an On-Site Camera System

Vision trackers have been proposed as a promising alternative for tracking at large-scale, congested construction sites. They provide the location of a large number of entities in a camera view across frames. However, vision trackers provide only two-dimensional (2D) pixel coordinates, which are not adequate for construction applications. This paper proposes and validates a method that overcomes this limitation by employing stereo cameras and converting 2D pixel coordinates to three-dimensional (3D) metric coordinates. The proposed method consists of four steps: camera calibration, camera pose estimation, 2D tracking, and triangulation. Given that the method employs fixed, calibrated stereo cameras with a long baseline, appropriate algorithms are selected for each step. Once the first two steps reveal camera system parameters, the third step determines 2D pixel coordinates of entities in subsequent frames. The 2D coordinates are triangulated on the basis of the camera system parameters to obtain 3D coordinates. The methodology presented in this paper has been implemented and tested with data collected from a construction site. The results demonstrate the suitability of this method for on-site tracking purposes.