Optimisation of fuel usage and steam availability in the power and steam plant of a paper mill

This paper presents the results of a project aimed at minimising fuel usage while maximising steam availability in the power and steam plant of a large newsprint mill. The approach taken was to utilise the better regulation and plant wide optimisation capabilities of Advanced Process Control, especially Model Predictive Control (MPC) techniques. These have recently made their appearance in the pulp and paper industry but are better known in the oil and petrochemical industry where they have been used for nearly 30 years. The issue in the power and steam plant is to ensure that sufficient steam is available when the paper machines require it and yet not to have to waste too much steam when one or more of the machines suffers an outage. This is a problem for which MPC is well suited. It allows variables to be kept within declared constraint ranges, a feature which has been used, effectively, to increase the steam storage capacity of the existing plant. This has resulted in less steam being condensed when it is not required and in significant reductions in the need for supplementary firing. The incidence of steam being dump-condensed while also supplementary firing the Combined Heat & Power (CHP) plant has been reduced by 95% and the overall use of supplementary firing is less than 30% of what it was. In addition the plant runs more smoothly and requires less operator time. The yearly benefit provided by the control system is greater than £200,000, measured in terms of 2005 gas prices.

Rationales of holonic manufacturing systems in leather industry

This paper presents an insight into leather manufacturing processes, depicting peculiarities and challenges faced by leather industry. An analysis of this industry reveals the need for a new approach to optimize the productivity of leather processing operations, ensure consistent quality of leather, mitigate the adverse health effects in tannery workers exposed to chemicals and comply with environmental regulation. Holonic manufacturing systems (HMS) paradigm represent a bottom-up distributed approach that provides stability, adaptability, efficient use of resources and a plug and operate functionality to the manufacturing system. A vision of how HMS might operate in a tannery is illustrated presenting the rationales behind its application in this industry. © 2013 Springer-Verlag.

A policy dimension required for technology roadmapping: Learning from the development of emerging wind energy industry in China

Innovation policies play an important role throughout the development process of emerging industries. However, existing policy studies view the process as a black-box, and fail to understand the policy-industry interactions through the process. This paper aims to develop an integrated technology roadmapping tool, in order to facilitate the better understanding of policy heterogeneity at the different stages of new energy industries in China. Through the case study of Chinese wind energy equipment manufacturing industry, this paper elaborates the dynamics between policy and the growth process of the industry. Further, this paper generalizes some Chinese specifics for the policy-industry interactions. As a practical output, this study proposes a policy-technology roadmapping framework that maps policy-market-product- technology interactions in response to the requirement for analyzing and planning the development of new industries in emerging economies (e.g. China). This paper will be of interest to policy makers, strategists, investors, and industrial experts. © 2011 IEEE.

Regulation: A Burden in Biopharmaceutical Industry? The Case of EU-Risk Management Plans

The generation of new medicinal products is both a contributor to global economic growth and a source of valuable benefits to human health. Given their direct responsibility for public health, regulatory authorities monitor closely both the development and exploitation of the underlying technologies and the products derived from them. The manner in which such regulation is implemented can result in regulators constraining or facilitating the generation of new products. This paper will study as an example the impact of EU Risk Management Plans (EU-RMPs), which have been mandatory for the approval of new medicines since 2005, on both the industry and regulatory authorities. In interviews, the responses of those who had experience of the implementation of EU-RMPs were mixed. Although the benefits of a more structured and predictable approach to the evaluation of risk were appreciated, some respondents perceived the regulation as an excessive burden on their organisations. The exploration of factors that influence how EU-RMP regulation affects individual firms provides new insights for both regulators and managers, and demonstrates one aspect of the complexity of the process by which new medicinal products are brought to market.

Regulation: A burden in biopharmaceutical industry? The case of EU-risk management plans

The generation of new medicinal products is both a contributor to global economic growth and a source of valuable benefits to human health. Given their direct responsibility for public health, regulatory authorities monitor closely both the development and exploitation of the underlying technologies and the products derived from them. The manner in which such regulation is implemented can result in regulators constraining or facilitating the generation of new products. This paper will study as an example the impact of EU Risk Management Plans (EU-RMPs), which have been mandatory for the approval of new medicines since 2005, on both the industry and regulatory authorities. In interviews, the responses of those who had experience of the implementation of EU-RMPs were mixed. Although the benefits of a more structured and predictable approach to the evaluation of risk were appreciated, some respondents perceived the regulation as an excessive burden on their organisations. The exploration of factors that influence how EU-RMP regulation affects individual firms provides new insights for both regulators and managers, and demonstrates one aspect of the complexity of the process by which new medicinal products are brought to market. © 2010 IEEE.

Understanding luxury in the premium automotive industry

This paper summarises the findings of investigations to date in understanding what luxury and premiumness mean to the high-end automotive consumer. Existing writings on luxury and premiumness are considered. An exploratory study was carried out in two countries using 309 respondents and 18 prestige cars. A "stream of consciousness" approach was used to capture respondent's views on a selection of vehicles. The codified transcripts were used to identify key differences between the top and bottom rated vehicles, in terms of the nature and quantity of emotional responses elicited. This paper describes some of these key product differences that were self-reported to impact upon a luxury response. Finally, suggestions are made as to the next steps required for this research. © 2007 ACM.

Managing Information Risks in asset management - Experiences from an in-depth case study in the utility industry

Information is one of the most important resources in our globalized economy. The value of information often exceeds the value of physical assets. Information quality has, in many ways, an impact on asset management organisations and asset managers struggle to understand and to quantify it, which is a prerequisite for effective information quality improvement. Over the past few years, we have developed an innovative management concept that addresses these new asset management challenges: a process for Total Information Risk Management (TIRM), which has been already tested in a number of asset management industries. The TIRM process enables to manage information quality more effectively in asset management organisations as it focuses specifically on the risks that are imposed by information quality. In this paper, we show how we have applied the TIRM process in an in-depth study at a medium-sized European utility provider, the Manx Electricity Authority (MEA), at the Isle of Man.

Social sensing in the field: Challenges in detecting social interactions in construction sites

Construction industry is a sector that is renowned for the slow uptake of new technologies. This is usually due to the conservative nature of this sector that relies heavily on tried and tested and successful old business practices. However, there is an eagerness in this industry to adopt Building Information Modelling (BIM) technologies to capture and record accurate information about a building project. But vast amounts of information and knowledge about the construction process is typically hidden within informal social interactions that take place in the work environment. In this paper we present a vision where smartphones and tablet devices carried by construction workers are used to capture the interaction and communication between workers in the field. Informal chats about decisions taken in the field, impromptu formation of teams, identification of key persons for certain tasks, and tracking the flow of information across the project community, are some pieces of information that could be captured by employing social sensing in the field. This information can not only be used during the construction to improve the site processes but it can also be exploited by the end user during maintenance of the building. We highlight the challenges that need to be overcome for this mobile and social sensing system to become a reality. © 2012 ACM.

Detection of Construction Workers in Video Frames for Automatic Initialization of Vision Trackers

Vision based tracking can provide the spatial location of construction entities such as equipment, workers, and materials in large scale, congested construction sites. It tracks entities in video streams by inferring their locations based on the entities’ visual features and motion histories. To initiate the process, it is necessary to determine the pixel areas corresponding to the construction entities to be tracked in the following consecutive video frames. In order to fully automate the process, an automated way of initialization is needed. This paper presents the method for construction worker detection which can automatically recognize and localize construction workers in video frames. The method first finds the foreground areas of moving objects using a background subtraction method. Within these foreground areas, construction workers are recognized based on the histogram of oriented gradients (HOG) and histogram of the HSV colors. HOG’s have proved to work effectively for detection of people, and the histogram of HSV colors helps differentiate between pedestrians and construction workers wearing safety vests. Preliminary experiments show that the proposed method has the potential to automate the initialization process of vision based tracking.

A policy dimension required for technology roadmapping: Learning from the emergence of Chinese wind turbine industry

Innovation policies play an important role throughout the development process of emerging industries in China. Existing policy and industry studies view the emergence process as a black-box, and fail to understand the impacts of policy to the process along which it varies. This paper aims to develop a multi-dimensional roadmapping tool to better analyse the dynamics between policy and industrial growth for new industries in China. Through reviewing the emergence process of Chinese wind turbine industry, this paper elaborates how policy and other factors influence the emergence of this industry along this path. Further, this paper generalises some Chinese specifics for the policy-industry dynamics. As a practical output, this study proposes a roadmapping framework that generalises some patterns of policy-industry interactions for the emergence process of new industries in China. This paper will be of interest to policy makers, strategists, investors and industrial experts. Copyright © 2013 Inderscience Enterprises Ltd.

Exploring industry dynamics and interactions

Within strategic technology management and innovation, often stakeholders extrapolate past industry dynamics, trends and patterns into the future. One frequently used concept is that of 'lifecycles' - an analogy of a sequence of stages encountered by living organisms. Lifecycle terms - such as technology, product, industry - are frequently used interchangeably and without clear definition. Within the interdisciplinary context of technology management and forecasting, this juxtaposition of dynamics can create confusion rather than simplification. This paper explores some of the dynamics typically associated with technology-based industries, illustrated with data from the early US automotive industry. A wide range of dimensions are seen to have potential to influence the path of industry development, and technology roadmapping architecture is used to present a simplified visualisation of some of these. Stakeholders need to consider the units of analysis, causality and synchronicity of relevant different dynamics, rather than isolated lifecycles. Some graphical curves represent simple aggregation of components; other dynamics have significant impact, but incur time lags, rather than being superimposed. To optimise alignment of the important dimensions within any technology development, and for future strategy decisions, understanding these interactions is critical. © 2012 Elsevier Inc.

Training and assignment of multi-skilled workers for implementing seru production systems

Confronted with high variety and low volume market demands, many companies, especially the Japanese electronics manufacturing companies, have reconfigured their conveyor assembly lines and adopted seru production systems. Seru production system is a new type of work-cell-based manufacturing system. A lot of successful practices and experience show that seru production system can gain considerable flexibility of job shop and high efficiency of conveyor assembly line. In implementing seru production, the multi-skilled worker is the most important precondition, and some issues about multi-skilled workers are central and foremost. In this paper, we investigate the training and assignment problem of workers when a conveyor assembly line is entirely reconfigured into several serus. We formulate a mathematical model with double objectives which aim to minimize the total training cost and to balance the total processing times among multi-skilled workers in each seru. To obtain the satisfied task-to-worker training plan and worker-to-seru assignment plan, a three-stage heuristic algorithm with nine steps is developed to solve this mathematical model. Then, several computational cases are taken and computed by MATLAB programming. The computation and analysis results validate the performances of the proposed mathematical model and heuristic algorithm. © 2013 Springer-Verlag London.