PASREG 2003: International workshop on processing and applications of superconducting (RE)BCO large grain materials

This issue of Superconductor Science and Technology is edited by Murakami, M., Cardwell, D.A., Salama, K., Krabbes, G., Habisreuther, T. and Gawalek, W. It contains 42 selected papers from the PASREG 2003 international workshop, held in Jena, Germany, 30 June - 2 July 2003. The workshop was organised by the Institut fur Physikalische Hochtechnologie, Jena, Germany and was the fourth in the series of workshops first held in Cambridge, UK, in 1997.

Computation of high-stability DC balancing scheme for ferroelectric liquid crystal on silicon holograms using graphics processing units.

Spatial light modulators based around liquid crystal on silicon have found use in a variety of telecommunications applications, including the optimization of multimode fibers, free-space communications, and wavelength selective switching. Ferroelectric liquid crystals are attractive in these areas due to their fast switching times and high phase stability, but the necessity for the liquid crystal to spend equal time in each of its two possible states is an issue of practical concern. Using the highly parallel nature of a graphics processing unit architecture, it is possible to calculate DC balancing schemes of exceptional quality and stability.

An experimental model of relay deployment planning tool for a wireless sensor network system to monitor civil engineering structures

It is essential to monitor deteriorated civil engineering structures cautiously to detect symptoms of their serious disruptions. A wireless sensor network can be an effective system for monitoring civil engineering structures. It is fast to deploy sensors especially in difficult-to-access areas, and it is extendable without any cable extensions. Since our target is to monitor deteriorations of civil engineering structures such as cracks at tunnel linings, most of the locations of sensors are known, and sensors are not required to move dynamically. Therefore, we focus on developing a deployment plan of a static network in order to reduce the value of a cost function such as initial installation cost and summation of communication distances of the network. The key issue of the deployment is the location of relays that forward sensing data from sensors to a data collection device called a gateway. In this paper, we propose a relay deployment-planning tool that can be used to design a wireless sensor network for monitoring civil engineering structures. For the planning tool, we formalize the model and implement a local search based algorithm to find a quasi-optimal solution. Our solution guarantees two routings from a sensor to a gateway, which can provide higher reliability of the network. We also show the application of our experimental tool to the actual environment in the London Underground.

The Place of Philosophy in Management

Our purpose is to not to define a particular philosophy of management, but rather to demonstrate some of the ways in which philosophy – ethics, metaphysics, epistemology, logic and æsthetics – contributes to the practice of management. We identify a number of contemporary management questions, procedures or issues where the application of philosophical approaches are relevant, and show how philosophical skills, an understanding of philosophical principles or exposure to philosophical discussion can contribute to improved management practice. In some ways the paper is a report on progress in the quest begun by Nigel Laurie and Christopher Cherry in the first issue of Philosophy of Management, formerly Reason in Practice (2001) when they asked why philosophers have interested themselves so little in the entire field of management. We include some examples where philosophers have written about management, some where managers have shown the direct impact of philosophy on management effectiveness and some where potential remains. In much we see links to process philosophy, and to the need for conversation and reflection by and between managers and philosophers. This does not of itself show how philosophy can contribute to management education. A brief final section discusses the way in which moral creativity skills can be developed through reflection, and describes how this has been done in the Manufacturing Leaders’ Programme at the Institute for Manufacturing at Cambridge and in the International Management Ethics & Values course taught to undergraduate management students in Adelaide, Singapore and Hong Kong. This will be taken up in a subsequent paper.

Development of modelling method selection tool for health services management: From problem structuring methods to modelling and simulation methods

Background: There is an increasing recognition that modelling and simulation can assist in the process of designing health care policies, strategies and operations. However, the current use is limited and answers to questions such as what methods to use and when remain somewhat underdeveloped. Aim. The aim of this study is to provide a mechanism for decision makers in health services planning and management to compare a broad range of modelling and simulation methods so that they can better select and use them or better commission relevant modelling and simulation work. Methods. This paper proposes a modelling and simulation method comparison and selection tool developed from a comprehensive literature review, the research team's extensive expertise and inputs from potential users. Twenty-eight different methods were identified, characterised by their relevance to different application areas, project life cycle stages, types of output and levels of insight, and four input resources required (time, money, knowledge and data). Results: The characterisation is presented in matrix forms to allow quick comparison and selection. This paper also highlights significant knowledge gaps in the existing literature when assessing the applicability of particular approaches to health services management, where modelling and simulation skills are scarce let alone money and time. Conclusions: A modelling and simulation method comparison and selection tool is developed to assist with the selection of methods appropriate to supporting specific decision making processes. In particular it addresses the issue of which method is most appropriate to which specific health services management problem, what the user might expect to be obtained from the method, and what is required to use the method. In summary, we believe the tool adds value to the scarce existing literature on methods comparison and selection. © 2011 Jun et al.

Complex study of transport AC loss in various 2G HTS racetrack coils

HTS racetrack coils are becoming important elements of an emerging number of superconducting devices such as generators or motors. In these devices the issue of AC loss is crucial, as performance and cooling power are derived from this quantity. This paper presents a comparative study of transport AC loss in two different types of 2G HTS racetrack coils. In this study, both experimental measurements and computer simulation approaches were employed. All the experiments were performed using classical AC electrical method. The finite-element computer model was used to estimate electromagnetic properties and calculate transport AC loss. The main difference between the characterized coils is covered inside tape architectures. While one coil uses tape based on RABITS magnetic substrate, the second coil uses a non-magnetic tape. Ferromagnetic loss caused by a magnetic substrate is an important issue involved in the total AC loss. As a result, the coil with the magnetic substrate surprised with high AC loss and rather low performance. © 2013 Elsevier B.V. All rights reserved.

Complex study of transport AC loss in various 2G HTS racetrack coils

HTS racetrack coils are becoming important elements of an emerging number of superconducting devices such as generators or motors. In these devices the issue of AC loss is crucial, as performance and cooling power are derived from this quantity. This paper presents a comparative study of transport AC loss in two different types of 2G HTS racetrack coils. In this study, both experimental measurements and computer simulation approaches were employed. All the experiments were performed using classical AC electrical method. The finite-element computer model was used to estimate electromagnetic properties and calculate transport AC loss. The main difference between the characterized coils is covered inside tape architectures. While one coil uses tape based on RABITS magnetic substrate, the second coil uses a non-magnetic tape. Ferromagnetic loss caused by a magnetic substrate is an important issue involved in the total AC loss. As a result, the coil with the magnetic substrate surprised with high AC loss and rather low performance. © 2013 Elsevier B.V. All rights reserved.

Linking business ecosystem lifecycle with platform strategy: A triple view of technology, application and organisation

This paper explores platform strategies along the business ecosystem lifecycle (BELC), based on a multiple-case study. Developing observations on platform strategies from a firm level to a business ecosystem level, the study investigates the issue of platform strategy through three views, respectively technology, application and organisation. As a result, a general evolutional pattern of platform strategy along the BELC is identified, where an open strategy emerges at the birth and expansion phases, then a dominating strategy rises at the authority phase, and finally the opportunistic strategy takes over at the renewal phase. This paper connects the core firms in the business ecosystem with the evolutionary platform strategies. Copyright © 2013 Inderscience Enterprises Ltd.

A technology roadmap of assistive technologies for dementia care in Japan.

The number of elderly people in Japan is growing, which raises the issue of dementia, as the probability of becoming cognitively impaired increases with age. There is an increasing need for caregivers, who are well-trained, experienced and can pay special attention to the needs of people with dementia. Technology can play an important role in helping such people and their caregivers. A lack of mutual understanding between caregivers and researchers regarding the appropriate uses of assistive technologies is another problem. A vision of person-centred care based on the use of information and communication technology to maintain residents' autonomy and continuity in their lives is presented. Based on this vision, a roadmap and a list of challenges to realizing assistive technologies have been developed. The roadmap facilitates mutual understanding between caregivers and researchers, resulting in appropriate technologies to enhance the quality of life of people with dementia.