SIMULATION OF THE ANAEROBIC DIGESTION OF FOOD WASTE

This study has established that the use of a computer model, the Anaerobic Digestion Model 1, is suitable for investigation of the stability and energy balance of the anaerobic digestion of food waste. In simulations, digestion of undiluted food waste was less stable than that of sewage sludge or mixtures of the two, but gave much higher average methane yields per volume of digester. In the best case scenario simulations, food waste resulted in the production of 5.3 Nm3 of methane per day per m3 of digester volume, much higher than that of sewage sludge alone at 1.1 Nm3 of methane per day per m3. There was no substantial difference in the yield per volatile solids added. Food waste, however, did not sustain a stable digestion if its cation content was below a certain level. Mixing food waste and sewage sludge allowed digestion with a lower cation content. The changes in composition of food waste feedstock caused great variation in biogas output and even more so volatile fatty acid concentration, which lowered the digestion stability. Modelling anaerobic digestion allowed simulation of failure scenarios and gave insights into the importance of the cation/anion balance and the magnitude of variability in feedstocks.

Exploring geographical dispersion in Thailand-based food supply chain (FSC)

Purpose: The purpose of this paper is to explore the key influential factors and their implications on food supply chain (FSC) location decisions from a Thailand-based manufacturer's view. Design/methodology/approach: In total, 21 case studies were conducted with eight Thailand-based food manufacturers. In each case, key influential factors were observed along with their implications on upstream and downstream FSC location decisions. Data were collected through semi-structured interviews and documentations. Data reduction and data display in tables were used to help data analysis of the case studies. Findings: This exploratory research found that, in the food industry, FSC geographical dispersion pattern could be determined by four factors: perishability, value density, economic-political forces, and technological forces. Technological forces were found as an enabler for FSC geographical dispersion whereas the other three factors could be both barriers and enablers. The implications of these four influential factors drive FSC towards four key patterns of FSC geographical dispersion: local supply chain (SC), supply-proximity SC, market-proximity SC, and international SC. Additionally, the strategy of the firm was found to also be an influential factor in determining FSC geographical dispersion. Research limitations/implications: Despite conducting 21 cases, the findings in this research are based on a relatively small sample, given the large size of the industry. More case evidence from a broader range of food product market and supply items, particularly ones that have significantly different patterns of FSC geographical dispersions would have been insightful. The consideration of additional influential factors such as labour movement between developing countries, currency fluctuations and labour costs, would also enrich the framework as well as improve the quality and validity of the research findings. The different strategies employed by the case companies and their implications on FSC location decisions should also be further investigated along with cases outside Thailand, to provide a more comprehensive view of FSC geographical location decisions. Practical implications: This paper provides insights how FSC is geographically located in both supply-side and demand-side from a manufacturing firm's view. The findings can also provide SC managers and researchers a better understanding of their FSCs. Originality/value: This research bridges the existing gap in the literature, explaining the geographical dispersion of SC particularly in the food industry where the characteristics are very specific, by exploring the internationalization ability of Thailand-based FSC and generalizing the key influential factors - perishability (lead time), value density, economic-political forces, market opportunities, and technological advancements. Four key patterns of FSC internationalization emerged from the case studies. © Emerald Group Publishing Limited.

Building more sustainable solutions in production-consumption systems: the case of food for people with reduced access

In new product development, the ability to integrate different dimensions of sustainability at a value chain level is still a complex, problematic goal. As product-service approaches are increasingly enabling the introduction of more sustainable paths, this paper describes the authors' experience thus far when building insights into conditions for the implementation of integrated solutions in a process of co-development and testing in real life conditions, which are driven by a social need focusing on food for people with reduced access. Throughout this process, which brought together producers, consumers and other stakeholders to design and test industrialised, sustainable solutions, empirical evidence demonstrates feasibility and usefulness of the approach and insight into the conditions for implementing interactive, comprehensive multi-stakeholder processes in real life situations. In addition, results show that the delivery of innovative solutions enabled to offer social added value, economic profits and environmental improvements under specific experimental conditions. © 2006 Elsevier Ltd. All rights reserved.

Prices need no preferences: social trends determine decisions in experimental markets for pain relief.

OBJECTIVE: A standard view in health economics is that, although there is no market that determines the "prices" for health states, people can nonetheless associate health states with monetary values (or other scales, such as quality adjusted life year [QALYs] and disability adjusted life year [DALYs]). Such valuations can be used to shape health policy, and a major research challenge is to elicit such values from people; creating experimental "markets" for health states is a theoretically attractive way to address this. We explore the possibility that this framework may be fundamentally flawed-because there may not be any stable values to be revealed. Instead, perhaps people construct ad hoc values, influenced by contextual factors, such as the observed decisions of others. METHOD: The participants bid to buy relief from equally painful electrical shocks to the leg and arm in an experimental health market based on an interactive second-price auction. Thirty subjects were randomly assigned to two experimental conditions where the bids by "others" were manipulated to follow increasing or decreasing price trends for one, but not the other, pain. After the auction, a preference test asked the participants to choose which pain they prefer to experience for a longer duration. RESULTS: Players remained indifferent between the two pain-types throughout the auction. However, their bids were differentially attracted toward what others bid for each pain, with overbidding during decreasing prices and underbidding during increasing prices. CONCLUSION: Health preferences are dissociated from market prices, which are strongly referenced to others' choices. This suggests that the price of health care in a free-market has the capacity to become critically detached from people's underlying preferences.

Polymer film packaging for food: An environmental assessment

Plastics packaging is ubiquitous in the food industry, fulfilling a range of functions including a significant role in reducing food waste. The public perception of packaging, however, is dominated by end-of-life aspects, when the packaging becomes waste often found littering urban, rural and marine environments. A balanced analysis of the role of packaging demands that the whole lifecycle is examined, looking not only at the packaging itself but also at the product being packaged. This paper focuses on packaging in the meat and cheese industry, analysing the impact of films and bags. The functions of packaging are defined and the environmental impact of delivering these functions is assessed. The influence of packaging on levels of waste and energy consumption elsewhere in the system is examined, including the contentious issue of end-of-life for packaging. Strategies for minimizing the environmental impact of the packaging itself involve reduction in the amount of material used (thinner packaging), rather than emphasizing end-of-life issues. Currently, with polymer recycling not at a high level, evidence suggests that this strategy is justifiable. Biodegradable polymers may have some potential for improving environmental performance, but are still problematic. The conclusion is that although current packaging is in some ways wasteful and inefficient, the alternatives are even less desirable. © 2013 Elsevier B.V. All rights reserved.