Mode-controlled vertical cavity surface emitting lasers for bandwidth enhancement of multimode fibre links

A GaAs Vertical Cavity Surface Emitting Laser (VCSEL) that generates controlled modes offset from the center is described. The device is modulated with a 27-1 pseudo-random bit sequence and its output is transmitted along a 1 km length of multimode fiber (MMF). Open eyes are obtained for data rates as high as 1.4Gb/s. The transmission bandwidth increases by a factor of 4 over over-filled launch (OFL). This enhancement is stable against environment influences on the fiber.

Controlled growth of aligned ZnO nanowires

The growth of vertically aligned zinc oxide nanowires (ZnO NW) using a simple vapor deposition method system is reported. The growth properties are studied as a function of the Au catalyst layer thickness, pressure, deposition temperature, and oxygen ratio. It was found that the diameter and density of the nanowires is controlled mostly by the growth temperature and pressure. The alignment of the nanowires depends on a combination of three factors including the pressure, temperature and the oxygen ratio. Our results implicates the growth occurs by a vapor liquid solid (VLS) process [1].

Risk-sensitive optimal feedback control accounts for sensorimotor behavior under uncertainty

Many aspects of human motor behavior can be understood using optimality principles such as optimal feedback control. However, these proposed optimal control models are risk-neutral; that is, they are indifferent to the variability of the movement cost. Here, we propose the use of a risk-sensitive optimal controller that incorporates movement cost variance either as an added cost (risk-averse controller) or as an added value (risk-seeking controller) to model human motor behavior in the face of uncertainty. We use a sensorimotor task to test the hypothesis that subjects are risk-sensitive. Subjects controlled a virtual ball undergoing Brownian motion towards a target. Subjects were required to minimize an explicit cost, in points, that was a combination of the final positional error of the ball and the integrated control cost. By testing subjects on different levels of Brownian motion noise and relative weighting of the position and control cost, we could distinguish between risk-sensitive and risk-neutral control. We show that subjects change their movement strategy pessimistically in the face of increased uncertainty in accord with the predictions of a risk-averse optimal controller. Our results suggest that risk-sensitivity is a fundamental attribute that needs to be incorporated into optimal feedback control models. © 2010 Nagengast et al.

Controlled adhesion and growth of long term glial and neuronal cultures on Parylene-c

This paper explores the long term development of networks of glia and neurons on patterns of Parylene-C on a SiO 2 substrate. We harvested glia and neurons from the Sprague-Dawley (P1-P7) rat hippocampus and utilized an established cell patterning technique in order to investigate cellular migration, over the course of 3 weeks. This work demonstrates that uncontrolled glial mitosis gradually disrupts cellular patterns that are established early during culture. This effect is not attributed to a loss of protein from the Parylene-C surface, as nitrogen levels on the substrate remain stable over 3 weeks. The inclusion of the anti-mitotic cytarabine (Ara-C) in the culture medium moderates glial division and thus, adequately preserves initial glial and neuronal conformity to underlying patterns. Neuronal apoptosis, often associated with the use of Ara-C, is mitigated by the addition of brain derived neurotrophic factor (BDNF). We believe that with the right combination of glial inhibitors and neuronal promoters, the Parylene-C based cell patterning method can generate structured, active neural networks that can be sustained and investigated over extended periods of time. To our knowledge this is the first report on the concurrent application of Ara-C and BDNF on patterned cell cultures. © 2011 Delivopoulos, Murray.

RNAi, DRD1, and histone methylation actively target developmentally important Non-CG DNA methylation in Arabidopsis

Cytosine DNA methylation protects eukaryotic genomes by silencing transposons and harmful DNAs, but also regulates gene expression during normal development. Loss of CG methylation in the Arabidopsis thaliana met1 and ddm1 mutants causes varied and stochastic developmental defects that are often inherited independently of the original met1 or ddm1 mutation. Loss of non-CG methylation in plants with combined mutations in the DRM and CMT3 genes also causes a suite of developmental defects. We show here that the pleiotropic developmental defects of drm1 drm2 cmt3 triple mutant plants are fully recessive, and unlike phenotypes caused by met1 and ddm1, are not inherited independently of the drm and cmt3 mutations. Developmental phenotypes are also reversed when drm1 drm2 cmt3 plants are transformed with DRM2 or CMT3, implying that non-CG DNA methylation is efficiently re-established by sequence-specific signals. We provide evidence that these signals include RNA silencing though the 24-nucleotide short interfering RNA (siRNA) pathway as well as histone H3K9 methylation, both of which converge on the putative chromatin-remodeling protein DRD1. These signals act in at least three partially intersecting pathways that control the locus-specific patterning of non-CG methylation by the DRM2 and CMT3 methyltransferases. Our results suggest that non-CG DNA methylation that is inherited via a network of persistent targeting signals has been co-opted to regulate developmentally important genes. © 2006 Chan et al.

How to avoid the problems of target-setting

Purpose: Advocates and critics of target-setting in the workplace seem unable to reach beyond their own well-entrenched battle lines. While the advocates of goal-directed behaviour point to what they see as demonstrable advantages, the critics of target-setting highlight equally demonstrable disadvantages. Indeed, the academic literature on this topic is currently mired in controversy, with neither side seemingly capable of envisaging a better way forward. This paper seeks to break the current deadlock and move thinking forward in this important aspect of performance measurement and management by outlining a new, more fruitful approach, based on both theory and practical experience. Design/methodology/approach: The topic was approached in three phases: assembling and reading key academic and other literature on the subject of target-setting and goal-directed behaviour, with a view to understanding, in depth, the arguments advanced by the advocates and critics of target-setting; comparing these published arguments with one's own experiential findings, in order to bring the essence of disagreement into much sharper focus; and then bringing to bear the academic and practical experience to identify the essential elements of a new, more fruitful approach offering all the benefits of goal-directed behaviour with none of the typical disadvantages of target-setting. Findings: The research led to three key findings: the advocates of goal-directed behaviour and critics of target-setting each make valid points, as seen from their own current perspectives; the likelihood of these two communities, left to themselves, ever reaching a new synthesis, seems vanishingly small (with leading thinkers in the goal-directed behaviour community already acknowledging this); and, between the three authors, it was discovered that their unusual combination of academic study and practical experience enabled them to see things differently. Hence, they would like to share their new thinking more widely. Research limitations/implications: The authors fully accept that their paper is informed by extensive practical experience and, as yet, there have been no opportunities to test their findings, conclusions and recommendations through rigorous academic research. However, they hope that the paper will move thinking forward in this arena, thereby informing future academic research. Practical implications: The authors hope that the practical implications of the paper will be significant, as it outlines a novel way for organisations to capture the benefits of goal-directed behaviour with none of the disadvantages typically associated with target-setting. Social implications: Given that increased efficiency and effectiveness in the management of organisations would be good for society, the authors think the paper has interesting social implications. Originality/value: Leading thinkers in the field of goal-directed behaviour, such as Locke and Latham, and leading critics of target-setting, such as Ordóñez et al. continue to argue with one another - much like, at the turn of the nineteenth century, proponents of the "wave theory of light" and proponents of the "particle theory of light" were similarly at loggerheads. Just as this furious scientific debate was ultimately resolved by Taylor's experiment, showing that light could behave both as a particle and wave at the same time, the authors believe that the paper demonstrates that goal-directed behaviour and target-setting can successfully co-exist. © Emerald Group Publishing Limited.

Developing a technology intelligence strategy at kodak european research: Scan & target

OVERVIEW: Kodak European Research (KER) developed a strategy for technology intelligence based on a theoretical model developed by Kerr et al. (2006). KER scouts designed and implemented a four-step approach to identify relevant technologies and research centers across Europe, Africa and the Middle East. The approach provides clear guidance for integrating web searches, scouting trips, networking and interactions with intermediaries. KER's example illustrates how companies can organize themselves to look outside corporate boundaries in search of technologies relevant for their business. The approach may be useful to those in other companies who have been asked to start a technology intelligence activity. © 2010 Industrial Research Institute, Inc.

The morphology of decorated amyloid fibers is controlled by the conformation and position of the displayed protein.

Self-assembled structures capable of mediating electron transfer are an attractive scientific and technological goal. Therefore, systematic variants of SH3-Cytochrome b(562) fusion proteins were designed to make amyloid fibers displaying heme-b(562) electron transfer complexes. TEM and AFM data show that fiber morphology responds systematically to placement of b(562) within the fusion proteins. UV-vis spectroscopy shows that, for the fusion proteins under test, only half the fiber-borne b(562) binds heme with high affinity. Cofactor binding also improves the AFM imaging properties and changes the fiber morphology through changes in cytochrome conformation. Systematic observations and measurements of fiber geometry suggest that longitudinal registry of subfilaments within the fiber, mediated by the interaction and conformation of the displayed proteins and their interaction with surfaces, gives rise to the observed morphologies, including defects and kinks. Of most interest is the role of small molecule modulation of fiber structure and mechanical stability. A minimum complexity model is proposed to capture and explain the fiber morphology in the light of these results. Understanding the complex interplay between these factors will enable a fiber design that supports longitudinal electron transfer.

The application of STEM and in situ controlled dehydration to bacterial systems using ESEM.

Transmission imaging with an environmental scanning electron microscope (ESEM) (Wet STEM) is a recent development in the field of electron microscopy, combining the simple preparation inherent to ESEM work with an alternate form of contrast available through a STEM detector. Because the technique is relatively new, there is little information available on how best to apply this technique and which samples it is best suited for. This work is a description of the sample preparation and microscopy employed by the authors for imaging bacteria with Wet STEM (scanning transmission electron microscopy). Three different bacterial samples will be presented in this study: first, used as a model system, is Escherichia coli for which the contrast mechanisms of STEM are demonstrated along with the visual effects of a dehydration-induced collapse. This collapse, although clearly in some sense artifactual, is thought to lead to structurally meaningful morphological information. Second, Wet STEM is applied to two distinct bacterial systems to demonstrate the novel types of information accessible by this approach: the plastic-producing Cupriavidus necator along with wild-type and ΔmreC knockout mutants of Salmonella enterica serovar Typhimurium. Cupriavidus necator is shown to exhibit clear internal differences between bacteria with and without plastic granules, while the ΔmreC mutant of S. Typhimurium has an internal morphology distinct from that of the wild type.